85xx: convert remaining 85xx boards over to use new LAW init code

Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
to use new LAW init code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kumar Gala 2008-01-16 09:15:29 -06:00
parent 572b13afc4
commit 4d3521cc79
16 changed files with 242 additions and 210 deletions

View file

@ -29,7 +29,7 @@ endif
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o
COBJS := $(BOARD).o law.o
SOBJS := init.o

View file

@ -30,11 +30,6 @@
#include <config.h>
#include <mpc85xx.h>
#define LAWAR_TRGT_PCI1 0x00000000
#define LAWAR_TRGT_PCI2 0x00100000
#define LAWAR_TRGT_PCIE 0x00200000
#define LAWAR_TRGT_DDR 0x00f00000
/*
* TLB0 and TLB1 Entries
*
@ -178,58 +173,3 @@ tlb1_entry:
2:
entry_end
/*
* LAW(Local Access Window) configuration:
*
* 0x0000_0000 0x7fff_ffff DDR 2G
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCIe MEM 512M
* 0xc000_0000 0xdfff_ffff PCI2 MEM 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
* 0xe200_0000 0xe10f_ffff PCI1 IO 1M
* 0xe280_0000 0xe20f_ffff PCI2 IO 1M
* 0xe300_0000 0xe30f_ffff PCIe IO 1M
* 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M
*
* Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*
* LAW 0 is reserved for boot mapping
*/
.section .bootpg, "ax"
.globl law_entry
law_entry:
entry_start
.long (4f-3f)/8
3:
.long 0
.long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_1G)) & ~LAWAR_EN
.long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
.long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
.long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
.long (CFG_PCI2_MEM_PHYS>>12) & 0xfffff
.long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCI2_IO_PHYS>>12) & 0xfffff
.long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
.long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
.long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff
.long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M)
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
.long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
.long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
4:
entry_end

61
board/atum8548/law.c Normal file
View file

@ -0,0 +1,61 @@
/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fsl_law.h>
#include <asm/mmu.h>
/*
* LAW(Local Access Window) configuration:
*
* 0x0000_0000 0x7fff_ffff DDR 2G
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCIe MEM 512M
* 0xc000_0000 0xdfff_ffff PCI2 MEM 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
* 0xe200_0000 0xe10f_ffff PCI1 IO 1M
* 0xe280_0000 0xe20f_ffff PCI2 IO 1M
* 0xe300_0000 0xe30f_ffff PCIe IO 1M
* 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M
*
* Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*
* LAW 0 is reserved for boot mapping
*/
struct law_entry law_table[] = {
SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
SET_LAW_ENTRY(8, CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);

View file

@ -29,7 +29,7 @@ endif
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o bcsr.o
COBJS := $(BOARD).o bcsr.o law.o
SOBJS := init.o

View file

@ -176,61 +176,3 @@ tlb1_entry:
2:
entry_end
/*
* LAW(Local Access Window) configuration:
*
*0) 0x0000_0000 0x7fff_ffff DDR 2G
*1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB
*2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB
*-) 0xe000_0000 0xe00f_ffff CCSR 1M
*3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M
*4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M
*5) 0xc000_0000 0xdfff_ffff SRIO 512MB
*6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB
*6.b) 0xf800_0000 0xf800_7fff BCSR 32KB
*6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB
*6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB
*6.e) 0xfe00_0000 0xffff_ffff Flash 32MB
*
*Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*
* The defines below are 1-off of the actual LAWAR0 usage.
* So LAWAR3 define uses the LAWAR4 register in the ECM.
*/
#define LAWBAR0 0
#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
#define LAWBAR4 ((CFG_PCIE1_IO_PHYS>>12) & 0xfffff)
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
#define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff)
#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
#define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
.section .bootpg, "ax"
.globl law_entry
law_entry:
entry_start
.long (4f-3f)/8
3:
.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6
4:
entry_end

View file

@ -0,0 +1,62 @@
/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fsl_law.h>
#include <asm/mmu.h>
/*
* LAW(Local Access Window) configuration:
*
*0) 0x0000_0000 0x7fff_ffff DDR 2G
*1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB
*2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB
*-) 0xe000_0000 0xe00f_ffff CCSR 1M
*3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M
*4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M
*5) 0xc000_0000 0xdfff_ffff SRIO 512MB
*6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB
*6.b) 0xf800_0000 0xf800_7fff BCSR 32KB
*6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB
*6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB
*6.e) 0xfe00_0000 0xffff_ffff Flash 32MB
*
*Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*
*/
struct law_entry law_table[] = {
SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
SET_LAW_ENTRY(3, CFG_PCIE1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
SET_LAW_ENTRY(5, CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
SET_LAW_ENTRY(6, CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
SET_LAW_ENTRY(7, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
int num_law_entries = ARRAY_SIZE(law_table);

View file

@ -25,10 +25,8 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o flash.o
#COBJS := $(BOARD).o flash.o $(BOARD)_slave.o
COBJS := $(BOARD).o flash.o law.o
SOBJS := init.o
#SOBJS :=
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))

View file

@ -135,44 +135,3 @@ tlb1_entry:
.long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
/* LAW(Local Access Window) configuration:
* 0000_0000-0800_0000: DDR(128M) -or- larger
* f000_0000-f3ff_ffff: PCI(256M)
* f400_0000-f7ff_ffff: RapidIO(128M)
* f800_0000-ffff_ffff: localbus(128M)
* f800_0000-fbff_ffff: LBC SDRAM(64M)
* fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
* fdf0_0000-fdff_ffff: CCSRBAR(1M)
* fe00_0000-ffff_ffff: Flash(32M)
* Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
* Window.
* Note: If flash is 8M at default position(last 8M),no LAW needed.
*/
#if !defined(CONFIG_SPD_EEPROM)
#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
#else
#define LAWBAR0 0
#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
#endif
#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
#if !defined(CONFIG_RAM_AS_FLASH)
#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
#else
#define LAWBAR2 0
#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
#endif
.section .bootpg, "ax"
.globl law_entry
law_entry:
entry_start
.long 0x03
.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
entry_end

54
board/mpc8540eval/law.c Normal file
View file

@ -0,0 +1,54 @@
/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fsl_law.h>
#include <asm/mmu.h>
/* LAW(Local Access Window) configuration:
* 0000_0000-0800_0000: DDR(128M) -or- larger
* f000_0000-f3ff_ffff: PCI(256M)
* f400_0000-f7ff_ffff: RapidIO(128M)
* f800_0000-ffff_ffff: localbus(128M)
* f800_0000-fbff_ffff: LBC SDRAM(64M)
* fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
* fdf0_0000-fdff_ffff: CCSRBAR(1M)
* fe00_0000-ffff_ffff: Flash(32M)
* Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
* Window.
* Note: If flash is 8M at default position(last 8M),no LAW needed.
*/
struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
#endif
SET_LAW_ENTRY(2, CFG_PCI_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
#ifndef CONFIG_RAM_AS_FLASH
SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
#endif
};
int num_law_entries = ARRAY_SIZE(law_table);

View file

@ -25,9 +25,8 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o sdram.o
COBJS := $(BOARD).o sdram.o law.o
SOBJS := init.o
#SOBJS :=
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))

View file

@ -176,47 +176,3 @@ tlb1_entry:
.long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
entry_end
/*
* LAW(Local Access Window) configuration:
*
* 0x0000_0000 0x7fff_ffff DDR 2G
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xc000_0000 0xdfff_ffff RapidIO 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
* 0xf800_0000 0xf80f_ffff BCSR 1M
* 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
*
* Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*/
#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR2 ((CFG_LBC_FLASH_BASE>>12) & 0xfffff)
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
/*
* Rapid IO at 0xc000_0000 for 512 M
*/
#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
.section .bootpg, "ax"
.globl law_entry
law_entry:
entry_start
.long 0x05
.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
.long LAWBAR4,LAWAR4
entry_end

54
board/tqm85xx/law.c Normal file
View file

@ -0,0 +1,54 @@
/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fsl_law.h>
#include <asm/mmu.h>
/*
* LAW(Local Access Window) configuration:
*
* 0x0000_0000 0x7fff_ffff DDR 2G
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xc000_0000 0xdfff_ffff RapidIO 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
* 0xf800_0000 0xf80f_ffff BCSR 1M
* 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
*
* Notes:
* CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
* If flash is 8M at default position (last 8M), no LAW needed.
*/
struct law_entry law_table[] = {
SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
SET_LAW_ENTRY(3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);

View file

@ -63,6 +63,8 @@
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
#define CONFIG_SYS_CLK_FREQ 33000000

View file

@ -43,6 +43,8 @@
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/* Using Localbus SDRAM to emulate flash before we can program the flash,
* normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
* Not availabe for EVAL board

View file

@ -49,6 +49,7 @@
/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* When initializing flash, if we cannot find the manufacturer ID,

View file

@ -50,6 +50,8 @@
#define CONFIG_CPM2 1 /* has CPM2 */
#endif
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* sysclk for MPC85xx
*