Commit graph

3788 commits

Author SHA1 Message Date
Bin Meng
f588b4d205 arm: ls1021atwr: Convert to use driver model TSEC driver
Now that we have added driver model support to the TSEC driver,
convert ls1021atwr board to use it.

This depends on previous DM series for ls1021atwr:
http://patchwork.ozlabs.org/patch/561855/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

[Vladimir] Made the following changes:
- Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi
- Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 -
  a mistake ported over from Linux. Each SGMII PCS lies on the private
  MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS).
- Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs
- Completely removed non-DM_ETH support from ls1021atwr
- Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio"
  and from "fsl,tsec" to "fsl,etsec2" to match Linux
2019-07-25 13:13:31 -05:00
Patrick Delaunay
e21e3ffdd1 psci: Fix warnings when compiling with W=1
This patch solves the following warnings:
arch/arm/mach-stm32mp/psci.c:

warning: no previous prototype for ‘psci_set_state’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_arch_cpu_entry’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_features’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_version’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_affinity_info’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_migrate_info_type’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_cpu_on’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_cpu_off’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_system_reset’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_system_off’ [-Wmissing-prototypes]

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-24 14:15:38 -04:00
AKASHI Takahiro
6324d50679 arm: move CONFIG_TFABOOT to generic Kconfig
Currently, CONFIG_TFABOOT is located in armv8/fsl-layerscape Kconfig,
but it will be also useful for other targets if some additional
configuration are necessary.
So move it to arch/arm/Kconfig.

Please note that CONFIG_TFABOOT still depends on
CONFIG_ARCH_SUPPORT_TFABOOT and so the menu won't come up
if any target doesn't need its own customization for TF-A boot.
This will maintain the compatibility.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Sriram Dash <sriram.dash@nxp.com>
Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: Peng Ma <peng.ma@nxp.com>
Cc: Yuantian Tang <andy.tang@nxp.com>
Cc: Pankit Garg <pankit.garg@nxp.com>
2019-07-18 11:31:27 -04:00
Tom Rini
79b8d3c285 UniPhier SoC updates for v2019.10
- import DT updates from Linux
 
 - add UniPhier SPI controller driver
 
 - make U-Boot image for 64bit SoCs position independent
 
 - tidy up various init code for next generation SoCs
 
 - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl0nREIeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG2GMP/2n8xlbLvYKVI5nF
 NP7yn6ZI04pEliuthMZEHxUwOXx7O8luk1NGIOOoTjMJUEO+QGsh9GXwNnhfzL2P
 mtI3Vq5ZZvwpHJPYK9JKze3Dn0apEoUWaqyj2J6s/r3FUmm/k7Y5J3QHLP4fpNG+
 m5cMwxrIPT8oefM/lnF45YDA0VY84SWfHfI39o1qKL+av0VIsN/uzYBwm4uOEyh+
 ZWY4CfL362w6EW03mrTA0RoJUyFmI6Jpcj/dAyU8E4+Fxlu3ZeN9rkUdd6FgVujU
 +JFA/rl/M1iMOAjrkrsknJgTgAEBOXW8zfnflsQS/LXWigC6NgxEXtHg3loAqZQH
 rK+bhWWSbHMkSp4ek0l7owKVhWhiv4TjmStjpVO85Hw0L5hd+La3yv9jRJjjz7Ac
 J3/ROJb/QXItjJr/GU5N6UpBeyWkQXEmueNEKRm3VyQSOjyedFINQ+2hnafCFgcO
 /bJBZUZoNKgj5fK2zUfM/FOsuMGHDb06u3cJfEnS1s5YnDEl2Hr8r/WhUUnYyQZg
 fZP+J/gyZCogrNy/2ijEyPj75b9MQOV9RnatvbirastJNia9hAXI/d3FUCRzVwlp
 5glb84AuiqmFbtCjQZ0kSI8dZI4hwY262ksAPR+yEawNQTU9Ay5uEcYxUq+oj11U
 OWZf9BiDvhCNmHAlX70vWF+M/oYE
 =X9wS
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2019.10

- import DT updates from Linux

- add UniPhier SPI controller driver

- make U-Boot image for 64bit SoCs position independent

- tidy up various init code for next generation SoCs

- misc cleanups
2019-07-11 18:08:44 -04:00
Miquel Raynal
2e8a720246 arm: spear: Return to BootROM if failing to boot from the main device
Overload the weak function board_boot_order() so that besides choosing
the main boot device, we can fallback on USB boot by returning in the
BootROM, eg. if the NOR flash is empty while it was the primary boot
medium.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
6d09581f78 arm: spear: Do not link the _main branch
The _main call is not supposed to return at all: don't link the
branch.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
f78fdee9fc arm: spear: Support returning to BootROM
Implement the weak board_return_to_bootrom() function so that when
enabling the spl_bootrom.c driver, one can make use of usbboot on
spear platforms. All necessary information to return to the BootROM
are stored in the BootROM's stack. The SPL stack pointer is reset so
we save the BootROM's stack pointer into the SPL .data section.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
6a9d0e275f arm: spear: Simplify start.S organization
There is no reason to do the few spear-related initialization, in a
different procedure than 'reset'. Spare one branching and get a linear
code flow by removing this indirection.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
08ad72ae81 arm: spear: Reference the link register with LR instead of R14
The link register is stored in R14. ARM assembly code allows to use
the 'lr' name to reference it instead of 'r14' which is not very
meaningful. Do the substitution to ease the reading.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
f30765b748 arm: spear: Use PUSH/POP mnemonics when relevant
Quoting ARM "RealView Compilation Tools Assembler Guide v4.0":

        PUSH and POP are synonyms for STMDB and LDM (or LDMIA), with
        the base register sp (r13), and the adjusted address written
        back to the base register.
	PUSH and POP are the preferred mnemonic in these cases.

Let's follow this recommandation to ease the reading and substitute
LDMIA/STMDB operations with PUSH/POP mnemonics.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
76bdaaa196 arm: spear: Purely cosmetic changes in start.S
Before cleaning a bit further the spear/start.S file, apply a few
cosmetic changes: capital letters, comment indentation and small
rewriting.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
10a5b3cd99 arm: spear: Fix the main comment in start.S
This comment describes the board state at the moment where we enter
the SPL. The description is entirely wrong; re-write it to fit the
reality.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
58cbb671ef arm: spear: Drop false comment
SPL BSS lies in SRAM and is actually initialized to 0 by the SPL in
arch/arm/lib/crt0.S:_main(), which is called by cpu_init_crit.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
68cadee6f2 arm: spear: Call the SPL 'SPL', not 'Xloader'
Rename Xloader as SPL in comments.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Miquel Raynal
aa13fa71ea arm: spear: Drop useless board_init_r call
It is clearly stated that board_init_f should *not* call
board_init_r. Indeed, board_init_f should return. The code will
continue through arch/arm/lib/crt0.S which will do more setup before
calling board_init_r.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-07-11 10:05:15 -04:00
Masahiro Yamada
382de4a7e9 arm64: add an option to switch visibility of CONFIG_SYS_INIT_SP_BSS_OFFSET
By default, CONFIG_SYS_INIT_SP_BSS_OFFSET was made invisible by not
giving a prompt to it.

The only way to define it is to hard-code an extra entry in SoC/board
Kconfig, like arch/arm/mach-tegra/tegra{186,210}/Kconfig.

Add a prompt to it in order to allow defconfig files to specify the
value of CONFIG_SYS_INIT_SP_BSS_OFFSET.

With this, CONFIG_SYS_INIT_SP_BSS_OFFSET would become always visible.
So, we need a new bool option to turn it off by default.

I move the 'default 524288' to the common place. This value is not too
big, but is big enough to avoid the overwrap of DT in most platforms.
If 512KB is not a suitable choice for your platform, you can change it
from your defconfig or menuconfig etc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2019-07-10 22:37:23 +09:00
Yangbo Lu
e37ac717d7 Convert to use fsl_esdhc_imx for i.MX platforms
Converted to use fsl_esdhc_imx for i.MX platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-23 14:18:34 +08:00
Mian Yousaf Kaukab
f2f83b2fd0 armv8: fix typo in LINUX_KERNEL_IMAGE_HEADER check
Fixes: 8163faf952 ARMv8: add optional Linux kernel image header

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Andreas Färber <afaerber@suse.de>
2019-06-20 10:57:08 -04:00
Vabhav Sharma
d90c7ac7a9 armv8: ls1046afrwy: Add support for LS1046AFRWY platform
LS1046AFRWY board supports LS1046A family SoCs. This patch
add base support for this board.
Board support's 4GB ddr memory, i2c, micro-click module,microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Yinbo Zhu
0dd74ec2df armv8: fsl-lsch2: add clock support for the second eSDHC
Layerscape began to use two eSDHC controllers, for example,
LS1012A. They are same IP block with same reference clock.
This patch is to add clock support for the second eSDHC.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Maciej Pijanowski
c34d8dcb3e arm: fsl-layerscape: add 0x3040 serdes1 settings for LS1046A
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Cc: piotr.krol@3mdeb.com
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Maciej Pijanowski
73420f0220 arm: fsl-layerscape: fix 0x3363 serdes1 settings for ls1046a
As per LS1046A hardware manual, SGMII.9 and SGMII.10 present on
lane D and lane C respectively for 0x3363 protocol.

So fix serdes1 settings for ls1046a.

Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Alex Marginean
4da0e52c9d armv8: fsl-layerscape: fix config dependency for layerscape pci code
Fixes a link error on layerscape platform, linking fails with CONFIG_PCI
set and CONFIG_PCI_LAYERSCAPE unset.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Pankit Garg
ab748801ef armv8: fsl-layerscape: Change bootcmd update logic
Change bootcmd update logic when CONFIG_ENV_ADDR is not defined

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Pankit Garg
293d75c0b1 armv8: fsl-layerscape: Update qspi clk cfg
Update qspi clock configuration in TFABOOT in case
of all boot sources except qspi boot source.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Meenakshi Aggarwal
1dff14c87d armv8/fsl-layerscape: Add loop to check L3 dcache status
Flushing L3 cache may need variable time depending upon cache line
allocation.

Coming up with a proper timeout value would be best handled by
simulations under multiple scenarios in your actual system.
>From the purely HN-F point of view, the flush would take ~15 cycles for
a clean line, and ~22 cycles for a dirty line.  For the dirty line case,
there are many variables outside the HN-F that will increase the
duration per line.  For example, a *DBIDResp from the SN-F/SBSX,
memory controller latency, SN-F/SBSX RetryAck responses, CCN ring
congestion, CCN ring hops, etc, etc.  The worst-case timeout would
have to factor in all of these variables plus the HN-F cycles for
every line in the L3, and assuming all lines are dirty

In case if L3 is not flushed properly, system behaviour will be
erratic, so remove timeout and add loop to check status of L3 cache.

System will stuck in while loop if there is some issue in L3 cache
flushing.

Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Yangbo Lu
087bfe67ac armv8: fsl-lsch3: add clock support for the second eSDHC
Layerscape began to use two eSDHC controllers, for example,
LS1028A. They are same IP block with same reference clock.
This patch is to add clock support for the second eSDHC.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Xiaowei Bao
36f50b7523 armv8: ls1028a: Add other serdes protocal support
Add other serdes protocal support.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Yinbo Zhu
123fbbbe84 armv8: ls1028a: enable workaround for USB errarum A-009007
Rx Compliance tests may fail intermittently at high jitter
frequencies using default register values.

So program register USB_PHY_RX_OVRD_IN_HI in certain sequence
to make the Rx compliance test pass.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Ran Wang
3458a4198c armv8: ls1028a: enable workaround for USB erratum A-008997
Enable workaround for USB erratum A-008997. Here PCSTXSWINGFULL
registers has been moved to DSCR as compared to other Layerscape SoCs
where it was in SCFG.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Patrick Delaunay
c596877ee6 armv7: timer: init timer with bootstage
In initf_bootstage() we call bootstage_mark_name() which ends up calling
timer_get_us() before timer_init(); that cause crash for stm32mp1.

This patch solve the issue without changing the initialization sequence.
See also commit 97d20f69f5 ("Enable CONFIG_TIMER_EARLY with bootstage")
for other solution when DM is activated for TIMER.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:36:47 +02:00
Udit Agarwal
d9532e8092 armv8: fsl-layerscape: Set env_loc to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.
ENVL_NOWHERE is dependent on CONFIG_ENV_IS_NOWHERE and not on
CONFIG_CHAIN_OF_TRUST so return ENVL_NOWHERE when CONFIG_ENV_IS_NOWHERE
is enabled

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
f278a21749 armv8: ls1028aqds: Add support of LS1028AQDS
LS1028AQDS Development System is a high-performance
computing, evaluation, and development platform that supports
LS1028A QorIQ Architecture processor.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang yuantian <andy.tang@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
353f36d96e armv8: ls1028ardb: Add support for LS1028ARDB
LS1028A is an ARMv8 implementation. LS1028ARDB is an evaluation
platform that supports the LS1028A family SoCs. This patch add basic
support of the platform.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
d4ad111dc4 armv8: ls1028a: Add NXP LS1028A SoC support
Ls1028a SoC is based on Layerscape Chassis Generation 3.2
architecture with features:
 2 ARM v8 Cortex-A72 cores, CCI400, SEC, DDR3L/4, LCD, GPU, TSN
 ENETC, 2 USB 3.0, 2 eSDHC, 2 FlexCAN, 2 SPI, SATA, 8 I2C controllers,
 6 LPUARTs, GPIO, SAI, qDMA, eDMA, GIC, TMU etc.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Hou Zhiqiang
20eae4c810 kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPAT
The LX2160A PCIe is using driver PCIE_LAYERSCAPE_GEN4 instead
of PCIE_LAYERSCAPE.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Hou Zhiqiang
059d942283 armv8: lx2160a: add MMU table entries for PCIe
The lx2160a have up to 6 PCIe controllers and have different
address and size of PCIe region.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Hou Zhiqiang
8348e79865 armv8: layerscape: use PCIe address macro for precompile PCIe MMU entry
Change to use PCIe address macro to determine if precompile the PCIe
MMU table entry.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Trevor Woerner
1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00
Trevor Woerner
b7b4af0e35 CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case
According to De Morgan's Law[1]:
	!(A && B) = !A || !B
	!(A || B) = !A && !B

There are 5 places in the code where we find:
	#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
	#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
	!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
	"is the [DI]CACHE on?"
and the construct:
	defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
	"is the [DI]CACHE off?"

Therefore
	!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
	"the opposite of 'are they both off?'"
in other words:
	"are either or both on?"
and:
	(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
	"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
2019-05-18 08:15:34 -04:00
Kever Yang
dc23c27aa5 arm: remove ARCH_ROCKCHIP macro in common code
This is fix to:
e2a12f590d rockchip: use 'arch-rockchip' as header file path

The V2 of origin patch set has fix this, but we merge V1 by
mistake, so lets correct it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Simon Goldschmidt
1b1d8c19f5 spl: fix linker size check off-by-one errors
This fixes SPL linker script size checks for 3 lds files where the size
checks were implemented as "x < YYY_MAX_SIZE".

Fix the size checks to be "x <= YYY_MAX_SIZE" instead.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-05 08:48:50 -04:00
Vignesh Raghavendra
add4967124 arch: armv8: Provide a way to disable cache maintenance ops
On AM654 SoC(arm64) which is IO coherent and has L3 Cache, cache
maintenance operations being done to support non-coherent platforms
causes issues.

For example, here is how U-Boot prepares/handles a buffer to receive
data from a device (DMA Write). This may vary slightly depending on the
driver framework:

	Start DMA to write to destination buffer
	Wait for DMA to be done (dma_receive()/dma_memcpy())
	Invalidate destination buffer (invalidate_dcache_range())
	Read from destination buffer

The invalidate after the DMA is needed in order to read latest data from
memory that’s updated by DMA write. Also, in case random prefetch has
pulled in buffer data during the “wait for DMA” before the DMA has
written to it. This works well for non-coherent architectures.

In case of coherent architecture with L3 cache, DMA write would directly
update L3 cache contents (assuming cacheline is present in L3) without
updating the DDR memory. So invalidate after “wait for DMA” in above
sequence would discard latest data and read will cause stale data to be
fetched from DDR. Therefore invalidate after “wait for DMA” is not
always correct on coherent architecture.

Therefore, provide a Kconfig option to disable cache maintenance ops on
coherent architectures. This has added benefit of improving the
performance of DMA transfers as we no longer need to invalidate/flush
individual cache lines(especially for buffer thats several KBs in size).

In order to facilitate use of same Kconfig across different
architecture, I have added the symbol to top level arch/Kconfig file.
Patch currently disables cache maintenance ops for arm64 only.
flush_dcache_all() and invalidate_dcache_all() are exclusively used
during enabling/disabling dcache and hence are not disabled.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-05-05 08:48:50 -04:00
Kever Yang
6916dad511 rockchip: arm: use 'arch-rockchip' for common header
rockchip platform header file is in 'arch-rockchip'
instead of arch-$(SOC) for all SoCs.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Gregory CLEMENT
c8aac24629 arm: lpc32xx: Fix timer initialization
The match controller register is not cleared during
initialization. However, some bits of this register may reset the TC if
tnMRx match it.

As we can't make any assumption about how U-Boot is launched by the first
stage bootloader (such as S1L) clearing this register ensure that the
timers work as expected.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-04-26 18:58:20 -04:00
Lars Povlsen
25c07c72fd ARMv8: PSCI: Fix PSCI_TABLE relocation issue
This fixes relaction isses with the PSCI_TABLE entries in
the psci_32_table and psci_64_table.

When using 32-bit adress pointers relocation was not being applied to
the tables, causing PSCI handlers to point to the un-relocated code
area. By using 64-bit data relocation is properly applied. The
handlers are thus in the "secure data" area, which is protected by
/memreserve/ in the FDT.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-04-23 17:57:28 -04:00
Ibai Erkiaga
1721b82c1f arm: fix hvc call
HVC call makes use of 6 mandatory arguments rather than 7 in the same way
as SMC calls. The 7th argument is optional (Client ID) for both HVC and
SMC but is implemented as 16-bit parameter and register R7 or W7. The aim
of this patch is just fix compilation error due to an invalid asm code in
the HVC call so that's why the 7th argument is removed.

The issue does not report any error in a normal build as hvc_call is not
used at all and is optimized by the compiler. Using -O0 triggers the
error so the patch is intended to fix issues on a ongoing effor to build
U-Boot with -O0.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
2019-04-22 18:13:22 -04:00
Ang, Chee Hong
fd50eac910 ARMv8: Disable fwcall when PSCI is enabled
When PSCI is enabled, we are expecting U-Boot which now act
as EL3 software will handle all the PSCI calls. We won't need
fwcall as no further HVC or SMC are needed.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-04-22 18:13:21 -04:00
Chee Hong Ang
f6b0115a96 ARMv8: Allow SiP service extensions on top of PSCI code
Allow PSCI layer to handle any SiP service functions added by
platform vendors. PSCI layer will look for SiP service function
in the SiP function table located in '._secure_svc_tbl_entries'
section if the SMC function identifier is not found in the PSCI
standard functions table. Use DECLARE_SECURE_SVC macro to declare
and add platform specific SiP service function.
This new section '._secure_svc_tbl_entries' is located next to
'._secure.text' section. Refer to arch/arm/cpu/armv8/u-boot.lds.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2019-04-22 18:13:21 -04:00
Lukasz Majewski
e5b345f30c pcm052: bk4: sdcard: Add support for SD card booting/recovery
This code allows reusing the default u-boot as in the late board init, the
default envs are restored and proper recovery scripts executed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00