Commit graph

2235 commits

Author SHA1 Message Date
Kunihiko Hayashi
a5f9be1ed5 usb: dwc3-generic: Disable host driver definition if gadget only
Even if only USB gadget is defined, dwc3 generic driver enables
a definition and probe/remove functions for host driver.

This enables the definition if USB_HOST is enabled only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2021-05-16 19:01:45 +02:00
Andre Przywara
1027f28bd4 usb: musb-new: Extend and move Allwinner quirk into Kconfig
All newer Allwinner SoCs (since about 2013) miss the CONFIGDATA register
in their MUSB implementation, so they need a quirk to hardcode this.

Currently this quirk depends on listing the SoCs affected in musb_reg.h,
which means that this list needs to grow with every new chip.

Move the quirk feature into Kconfig, next to PIO_ONLY, and change the
default to y (for Allwinner builds), while listing the early
implementations as exceptions.

This fixes USB peripheral operation on some newer SoCs, which were not
explicitly listed before.

Tested on H6, H616, R40 (which were broken before), and also on the H5
and A20, for regressions.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-05-16 19:01:45 +02:00
Neil Armstrong
60e531fabf usb: dwc3-meson-g12a: skip phy on -ENODATA aswell
If the PHY isn't specified in the DT, -ENODATA means it should be skipped,
handle it like -ENOENT.

With that, devices without USB3 supported can have USB working (Odroid-HC4).

Fixes: adb049abf7 ("usb: dwc3: Add Meson G12A USB Glue")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-05-14 17:41:12 +02:00
Marek Vasut
53396d67ba usb: ehci-mx6: Limit PHY address parsing to !CONFIG_PHY
For systems which use generic PHY support and implement USB PHY driver,
the parsing of PHY properties is unnecessary, disable it.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-28 17:16:18 +02:00
Ye Li
e1769da17e usb: ehci-hcd: Add IAA handshake for removing async QH
According to EHCI spec, software needs to do handshake with HC for
safely removing QH from async list. This handshake is implemented by
setting IAAD (Interrupt on Async Advance Doorbell) bit in USB_USBCMD
register and poll the IAA (Interrupt on Async Advance bit) in the
USB_USBSTS to ensure the HC has released all on-chip state that may
potentially reference one of the data structures just removed.

Current codes only check active status of the last QTD, but this can't
ensure the QH is released from HC. We can meet unrecoverable
"EHCI timed out on TD" errors when running UEFI SCT tests on USB disk.
The USB_ASYNCLISTADDR register is changed to a invalid address when the
issue happens. It is fixed after adding the IAA handshake.

Steps to reproduce the issue:
1. Build the UEFI SCT from https://github.com/tianocore/edk2-test
2. Build the EDK2 UEFI Shell from https://github.com/tianocore/edk2
3. Copy SCT files and Shell.efi to USB disk FAT partition
4. Load the Shell.efi from USB FAT, and run bootefi to execute it
5. After booting into Shell, enter the SCT directory and run "sct -a"
   to execute all tests.
6. Tests run about 1 hour and stop with many EHCI timeout errors like
   EHCI timed out on TD - token=0x801f8c80

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-04-22 21:09:57 +02:00
Marek Vasut
5e7e2a8e4f usb: ehci-mx6: Add iMX8M support
The iMX8M uses nop PHY, select PHY and NOP_PHY automatically.
Otherwise, the DM capable driver is now perfectly compatible.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
f444f8986b usb: ehci-mx6: Fix aarch64 build warnings
Fix cast from pointer to integer of different size by casting the
pointer to uintptr_t instead of uint32_t, the former has correct
size on both 32bit and 64bit architectures.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
e87015ff05 usb: ehci-mx6: Add fsl,imx7d-usb compatible string
Add new compatible string, used by some more up-to-date DTs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
1aae8a35a2 usb: ehci-mx6: Set default CONFIG_MXC_USB_PORTSC if not defined
There is now multiple copies of CONFIG_MXC_USB_PORTSC in configs set to
PORT_PTS_UTMI | PORT_PTS_PTW, which is in fact the default register value
for MX6, MX7 and MX7ULP. Define the default value of CONFIG_MXC_USB_PORTSC
in the driver and use it in case CONFIG_MXC_USB_PORTSC is not defined in
config, to reduce the duplication.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
50d0146cb7 usb: ehci-mx6: Add generic EHCI PHY support
In case PHY support is enabled, use the generic EHCI PHY support
to start and stop the PHY.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
6443a3bc40 usb: ehci-mx6: Use portnr from DT in DM case
In case the platform uses DM, determine port number, which is
used as offset in USBMISC registers, from PHY node DT aliases,
just like Linux does.

Fixes: 4de51cc25b ("usb: ehci-mx6: Drop assignment of sequence number")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
668646995f usb: ehci-mx6: Pass MISC address to usb_oc_config()
Instead of passing ad-hoc sequence number to usb_oc_config(), pass in
the USB MISC address itself. The USB MISC address comes from DT in DM
case, and from the old method using controller index in non-DM case.

Fixes: 4de51cc25b ("usb: ehci-mx6: Drop assignment of sequence number")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
849763b963 usb: ehci-mx6: Split usb_power_config()
Split usb_power_config() per SoC and pass in USB PHY, USBNC and ANATOP
addresses instead of ad-hoc sequence numbers. This is only applicable
on legacy systems which do not implement proper PHY support. Once PHY
support is available, parts of this can be removed altogether and moved
to the PHY driver, similar to Linux phy-mxs-usb.c .

Fixes: 4de51cc25b ("usb: ehci-mx6: Drop assignment of sequence number")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
eb64f598dc usb: ehci-mx6: Pass PHY address to usb_*_phy*()
Instead of passing ad-hoc index to USB PHY handling functions and then
try and figure out the PHY address, pass in the PHY address itself. For
DM case, this address comes easily from DT. For non-DM case, the previous
method is still present, however the non-DM case will soon be removed.

Fixes: 4de51cc25b ("usb: ehci-mx6: Drop assignment of sequence number")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
ef464e4c36 usb: ehci-mx6: Split ehci_mx6_common_init()
In order to pass component addresses around easily instead of passing
ad-hoc sequence numbers, it is necessary to split ehci_mx6_common_init().
Make it so and call the separate functions instead.

Since board_ehci_hcd_init() makes no sense in DM case, do not call it
in DM case.

Fixes: 4de51cc25b ("usb: ehci-mx6: Drop assignment of sequence number")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
4dcfa3bcbc usb: ehci-mx6: Parse USB PHY and MISC offsets from DT
In case DM and OF controler is enabled, but PHY support is disabled,
parse USB PHY and MISC component addresses from DT manually. Those
component addresses will be used in subsequent patches to access the
ANATOP, PHY and MISC registers matching the controller and thus get
rid of the ad-hoc controller sequence number mapping.

Fixes: 4de51cc25b ("usb: ehci-mx6: Drop assignment of sequence number")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
598fa7e106 usb: ehci-mx6: Unify USBNC registers
Merge USBNC register layout structure into a single one, instead of
having three separate structures and a lot of ifdeffery. No functional
change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
7f2c10eec6 usb: ehci-mx6: Add DM clock support
Add support for using DM clock framework to enable and disable all the
necessary clock for the USB controller.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Marek Vasut
7e1f1e16fe usb: ehci-mx6: Turn off Vbus on probe failure
The driver turns on Vbus regulator in probe, but fails to turn it back
off in case of probe failure. Add the missing code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-18 04:29:36 +02:00
Sean Anderson
9af869c414 lib: string: Implement strlcat
This introduces strlcat, which provides a safer interface than strncat. It
never copies more than its size bytes, including the terminating nul. In
addition, it never reads past dest[size - 1], even if dest is not
nul-terminated.

This also removes the stub for dwc3 now that we have a proper
implementation.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12 17:44:55 -04:00
Tom Rini
2e216be8cf Merge https://source.denx.de/u-boot/custodians/u-boot-usb
- XHCI fixes
2021-04-06 14:11:21 -04:00
Stefan Roese
82e4e198ed usb: xhci: Make debug output better readable and checkpatch clean
This change makes debugging a bit easier as the output is better
readable with the added space. The explicit le16_to_cpu() is not
needed in the output. Also this patch moves the strings into one line
to make the patch checkpatch clean.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2021-04-06 16:38:58 +02:00
Aaron Williams
cf868772dd usb: xhci: Add missing xhci_readl()
Accessing the xHCI controller registers should be done via the
xhci_readl/writel functions. This patch adds this to a few missing
places.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2021-04-06 16:38:57 +02:00
Simon Glass
6379a94cac usb: Return -ENOSYS when system call is not available
Update usb_gadget_release() to use -ENOSYS, which is the correct error
code for U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-04-06 16:33:19 +12:00
Chunfeng Yun
044d7003a7 usb: mtu3: flush cache for next GPD
When flush cache of the current GPD and resume QMU, the controller
will try to access the next GPD after processing the current one,
if not flush the next GPD, the controller may get wrong GPD status.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2021-03-10 11:48:09 +01:00
Heinrich Schuchardt
795d605cab usb: USB keyboard requires DM_KEYBOARD
If CONFIG_DM_USB=y, the USB keyboard only works if CONFIG_DM_KEYBOARD=y.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-03 04:12:46 +01:00
Pali Rohár
7f98575b7b usb: gadget: Use dbg_ep0() macro instead of serial_printf()
All debug messages from ep0.c except a few are printed by dbg_ep0() macro.
So for remaining few exceptions use also dbg_ep0() instead of serial_printf().

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
2021-03-03 04:12:46 +01:00
Pali Rohár
f2e81c1d38 usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint
If we do not set FIFO buffer address and size for some endpoint which is in
use then default programmed address 0x0 would be used which is in conflict
with address of FIFO buffer for endpoint 0. Moreover address of FIFO buffer
for endpoint 0 cannot be programmed, it is fixed to 0x0. Sharing address
space between more endpoints cause data loss and unexpected errors.

This patch is fixing transmission of characters over usbtty serial console
and allows using of usbtty for debugging purposes on Nokia N900.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
2021-03-03 04:12:46 +01:00
Pali Rohár
f1e8d2072c usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand
Interrupt for EP0 is indicated in intrtx register via first bit. This bit
is set for both RX and TX despite register has only TX in its name. First
bit in intrrx register is reserved, not used and never set.

So remove calling musb_peri_ep0() function at every iteration of udc_irq()
and musb_peri_rx() and call it only from musb_peri_tx() when correct
interrupt bit in initrtx it set.

Address from SET ADDRESS command must be set to faddr register only after
acknowledging SERV_RXPKTRDY followed by received EP0 interrupt. So prior
calling musb_peri_ep0_set_address() check for EP0 interrupt instead of
(incorrect) MUSB_INTR_SOF interrupt.

This patch fixes issue that host (computer) cannot register U-Boot USB
device and is failing with errors:

    usb 1-1: new full-speed USB device number 86 using xhci_hcd
    usb 1-1: Device not responding to setup address.
    usb 1-1: Device not responding to setup address.
    usb 1-1: device not accepting address 86, error -71

U-Boot was writing address to faddr register too early and did not wait for
correct interrupt after which should update address.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
2021-03-03 04:12:46 +01:00
Pali Rohár
ff77bb301e usb: musb: Fix receiving of bigger buffers
If musb_peri_rx_ep() was called to process received HW buffer but U-Boot
cannot read it yet (e.g. because U-Boot SW buffer is full) then interrupt
was marked as processed also when HW buffer stayed unprocessed.

U-Boot tried to process this buffer again when it received interrupt again,
but it can receive it only when sender (host) sends a new data. As sender
(host) is not going to send a new data until U-Boot process current data
this issue caused a deadlock in case sender (host) is emitting data faster
than U-Boot can process it.

Reading musb intrrx register automatically clears this register and marks
interrupt as processed. So to prevent marking interrupt in U-Boot as
processed, adds a new variable pending_intrrx which would contain
unprocessed bits of intrrx register.

For a second step, every time when musb_peri_rx_ep() is called and there
are waiting data to be processed (signaled by MUSB_RXCSR_RXPKTRDY) either
acknowledge sender (via musb_peri_rx_ack()) that whole HW buffer was
processed or set corresponding bit in pending_intrrx that HW buffer was not
fully processed yet and next iteration is required after U-Boot allocates
space for reading HW buffer.

This patch fixes receiving large usb buffers, e.g. file transfer via Kermit
protocol implemented by 'loadb' U-Boot command over usbtty serial console.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
2021-03-03 04:12:46 +01:00
Pali Rohár
ea7125c4c6 usb: musb: Fix transmission of bigger buffers
If udc_endpoint_write() was called with bigger payload which does not fit
into one USB packet it is needed to transmit payload in more USB packets.
First packet is transmitted by udc_endpoint_write() call itself and other
packets are put into waiting queue.

Implement function musb_peri_tx() which checks if endpoints are ready for
transmit and continue transmission of waiting queue.

This patch fixes sending big output from printenv command over usbtty
serial console.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>>
2021-03-03 04:12:46 +01:00
Pali Rohár
7d7ae28c8b usb: musb: Read value of PERI_RXCSR to 16bit variable
PERI_RXCSR is 16bit register so store its value into 16bit local variable.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
2021-03-03 04:12:46 +01:00
Pali Rohár
10bc132510 usb: musb: Fix configuring FIFO for endpoints
This patch fixes configuring FIFOs for one-directional endpoints which have
only one queue (either RX or TX, but noth both).

Size of FIFO buffer is 2^(idx+3) bytes and starting address is 2^(addr+3).
Moreover first 64 bytes are reserved for EP0.

Without this patch if FIFO size specified by caller was zero then idx was
incorrectly calculated (expr. ffs(0)-1) and size overflowed in fifosz
register. This register uses has only 4 bits for FIFO size. Moreover
specifying zero buffer size is not possible (with idx=0 is minimal buffer
size 8 bytes).

So even for one-directional endpoints we need to correctly specify both
(RX and TX) FIFO buffer sizes and its addresses.

This patch is fixing calculation of start address and buffer size to
minimal value and ensures that it would not overlap with buffer reserved
for EP0.

This issue caused loose of packets on USB bus in both directions and
basically usbtty was unusable.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
2021-03-03 04:12:46 +01:00
Pali Rohár
a6f5e1b9cd usb: musb: Always clear the data toggle bit when configuring ep
Without this patch clearing was done only when U-Boot was compiled with
MUSB Host Controller. But clearing of data toggle bit is needed also for
MUSB Device Controller otherwise Device Controller does not work correctly.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
2021-03-03 04:12:45 +01:00
Patrice Chotard
0a7e5e5f10 usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start() and usb_gadget_register_driver()
Since commit 8745b9ebcc ("usb: gadget: add super speed support")
ums was no more functional on platform which use dwc2_udc_otg driver.

This was due to a too restrictive test which checked that the gadget
driver speed was either FS or HS.

So all gadget driver with max speed set to speed higher than
HS (SS in case of composite gadget driver in our case) are not
allowed, which is wrong.

Update the speed test in usb_gadget_register_driver() and in
dwc2_gadget_start() to allow all gadget driver speed equal or higher
than FS.

Tested on stm32mp157c-ev1 board.

Fixes: c791c8431c ("usb: dwc2: convert driver to DM_USB_GADGET")

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-02-26 15:30:55 +01:00
Heiko Schocher
bc820d5bcc fastboot: add UUU command UCmd and ACmd support
add support for the UUU commands ACmd and UCmd.

Enable them through the Kconfig option
CONFIG_FASTBOOT_UUU_SUPPORT

base was commit in NXP kernel
9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support")

and ported it to current mainline. Tested this patch
on imx6ul based board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-26 15:30:55 +01:00
Igor Opaniuk
2147a16983 dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.

CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.

All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
     's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-21 06:08:00 +01:00
Nicolas Saenz Julienne
1a474559d9 xhci: translate virtual addresses into the bus's address space
So far we've been content with passing physical addresses when
configuring memory addresses into XHCI controllers, but not all
platforms have buses with transparent mappings. Specifically the
Raspberry Pi 4 might introduce an offset to memory accesses incoming
from its PCIe port.

Introduce xhci_virt_to_bus() and xhci_bus_to_virt() to cater with these
limitations, and make sure we don't break non DM users.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
[mb: fix compilation for 32 bit]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

fix from nicolas
2021-02-18 11:56:26 +01:00
Nicolas Saenz Julienne
e3bbc1f74e usb: xhci-pci: Add DM_FLAG_OS_PREPARE flag
The PCIe bus the controller is connected to might need to be removed
prior the handover. Make sure xhci-pci is also removed so as to avoid
unexpected timeouts or hangs.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18 11:56:25 +01:00
Tom Rini
2ae80437fb Merge branch '2021-02-02-drop-asm_global_data-when-unused'
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-15 10:16:45 -05:00
Patrick Delaunay
db8fb2ffc4 usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotg
The Linux kernel v5.7-rc1 introduced the compatible "st,stm32mp15-hsotg".

See Linux kernel commit d49850110434 ("dt-bindings: usb: dwc2: add
support for STM32MP15 SoCs USB OTG HS and FS")

This patch updates the supported compatible in DWC2 driver,
removes the add-on done in U-Boot dtsi and keeps the compatible
defined in SOC dtsi arch/arm/dts/stm32mp151.dtsi:

usbotg_hs: usb-otg@49000000 {
	compatible = "st,stm32mp15-hsotg", "snps,dwc2";
	reg = <0x49000000 0x10000>;
...
};

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-02-10 22:23:35 +01:00
Stefan Roese
cec804251d usb: xhci: Fix compare to use physical addresses in xhci_bulk_tx()
Testing with v2021.01 on MIPS Octeon has shown, that the latest patch
for the "short packet event trb handling" did introduce a bug on
platforms with virtual address != physical address. This patch fixes
this issue by using the correct address types in the compare (both
physical in this case).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Ran Wang <ran.wang_1@nxp.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
2021-02-10 22:23:24 +01:00
Pali Rohár
5a5024fee0 usb: xhci-pci: Check for errors from dm_pci_map_bar()
Function dm_pci_map_bar() may fail and returns NULL. Check this to prevent
dereferencing a NULL pointer.

In xhci-pci this may happen when board does not enable CONFIG_PCI_PNP and
PCI_BASE_ADDRESS_0 contains unconfigured zero address.

Signed-off-by: Pali Rohár <pali@kernel.org>
2021-02-10 22:23:24 +01:00
Chunfeng Yun
04232f78b3 usb: xhci-mtk: support option to disable ports
Add support to disable specific ports, it's useful for some
scenarios:
1. usb3 PHY is shared whith PCIe or SATA, the corresponding
   usb3 port can be disabled;
2. some usb2 or usb3 ports are not used on special platforms,
   they should be disabled to save power.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2021-02-10 22:23:24 +01:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Li Jun
723fd5668f usb: gaget: ci: set ep's desc when enable ep
As we need standard usb_ep's desc, so set it when enable ep.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
27c9141b11 usb: gadget: fastboot: use correct max packet size
Change to use wMaxPacketSize of current speed EP desc for request
length wrap up.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
54b22f409c usb: udc: ci: update speed handling
Remove the gadget driver speed check, and set its max_speed to
be USB_SPEED_HIGH.

Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
4df50f89f5 usb: composite: force gadget to be USB2 for HS only function
If one of functions is not super speed capable, we need force the udc
to be high speed, this is an equivalent implementation of
usb_gadget_udc_set_speed() in kernel but simple, which set the gadget
max_speed to be high speed, so afterwards when start gadget duc can
set the HW to be USB 2.0 mode.

Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
429e2f299f usb: gadget: dnl: set dnl to be super speed
Set its max_speed to be super speed.

Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
761dfe0fb2 usb: fastboot: add super speed support
Add super speed EP config.

Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
8745b9ebcc usb: gadget: add super speed support
This patch is to add usb gadget super speed support in common
driver, including BOS descriptor and select the super speed
descriptor from function driver.

Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Jun Li
42a594de14 usb: gadget: update os_desc_config when add config
Always use the new added config for os_desc_config to fix cdev->
os_desc_config may miss set in case we restart usb gadget driver.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Jun Li
4e643671f5 usb: gadget: set correct usb_configuration for os_desc_config
The current way to set cdev->os_desc_config is wrong if user restart
fastboot, as the old config is not used anymore and new allocated
usb_configuration will be used, so set the os_desc_config while
usb_add_config.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
8043cf8fbd usb: gadget: fastboot: add ext properties for WCID
Add device interface GUID for Microsoft Extended Properties Feature
Descriptor.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
37e4fc3354 usb: gadget: add WCID support for mfgtool
Enable WCID(Microsoft Compatible ID Feature Descriptor) for mfgtool.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
a764c94128 usb: gadget: OS Feature Descriptors support
This is a proting patch from linux kernel: 37a3a533429e
("usb: gadget: OS Feature Descriptors support"), the original commit
log see below:

There is a custom (non-USB IF) extension to the USB standard:

http://msdn.microsoft.com/library/windows/hardware/gg463182

They grant permission to use the specification - there is
"Microsoft OS Descriptor Specification License Agreement"
under the link mentioned above, and its Section 2 "Grant
of License", letter (b) reads:

"Patent license. Microsoft hereby grants to You a nonexclusive,
royalty-free, nontransferable, worldwide license under Microsoft鈥檚
patents embodied solely within the Specification and that are owned
or licensable by Microsoft to make, use, import, offer to sell,
sell and distribute directly or indirectly to Your Licensees Your
Implementation. You may sublicense this patent license to Your
Licensees under the same terms and conditions."

The said extension is maintained by Microsoft for Microsoft.

Yet it is fairly common for various devices to use it, and a
popular proprietary operating system expects devices to provide
"OS descriptors", so Linux-based USB gadgets whishing to be able
to talk to a variety of operating systems should be able to provide
the "OS descriptors".

This patch adds optional support for gadgets whishing to expose
the so called "OS Feature Descriptors", that is "Extended Compatibility ID"
and "Extended Properties".

Hosts which do request "OS descriptors" from gadgets do so during
the enumeration phase and before the configuration is set with
SET_CONFIGURATION. What is more, those hosts never ask for configurations
at indices other than 0. Therefore, gadgets whishing to provide
"OS descriptors" must designate one configuration to be used with
this kind of hosts - this is what os_desc_config is added for in
struct usb_composite_dev. There is an additional advantage to it:
if a gadget provides "OS descriptors" and designates one configuration
to be used with such non-USB-compliant hosts it can invoke
"usb_add_config" in any order because the designated configuration
will be reported to be at index 0 anyway.

This patch also adds handling vendor-specific requests addressed
at device or interface and related to handling "OS descriptors"."

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Peng Fan
16fd832e0e usb: gadget: add Kconfig for OS descriptors
Add Kconfig for OS descriptors

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
6777483f5d usb: gadget: move utf8_to_utf16le to header file
As other users may use utf8_to_utf16le() to convert the utf8
to utf16 for usb, so move it to head file.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
1c7aacb9a8 usb: gadget: OS String support
This is a porting patch from linux kernel: 19824d5eeece
("usb: gadget: OS String support"), original commit log
see below:

"There is a custom (non-USB IF) extension to the USB standard:

http://msdn.microsoft.com/library/windows/hardware/gg463182

They grant permission to use the specification - there is
"Microsoft OS Descriptor Specification License Agreement"
under the link mentioned above, and its Section 2 "Grant
of License", letter (b) reads:

"Patent license. Microsoft hereby grants to You a nonexclusive,
royalty-free, nontransferable, worldwide license under Microsoft鈥檚
patents embodied solely within the Specification and that are owned
or licensable by Microsoft to make, use, import, offer to sell,
sell and distribute directly or indirectly to Your Licensees Your
Implementation. You may sublicense this patent license to Your
Licensees under the same terms and conditions."

The said extension is maintained by Microsoft for Microsoft.

Yet it is fairly common for various devices to use it, and a
popular proprietary operating system expects devices to provide
"OS descriptors", so Linux-based USB gadgets whishing to be able
to talk to a variety of operating systems should be able to provide
the "OS descriptors".

This patch adds optional support for gadgets whishing to expose
the so called "OS String" under index 0xEE of language 0.
The contents of the string is generated based on the qw_sign
array and b_vendor_code.

Interested gadgets need to set the cdev->use_os_string flag,
fill cdev->qw_sign with appropriate values and fill cdev->b_vendor_code
with a value of their choice.

This patch does not however implement responding to any vendor-specific
USB requests."

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Li Jun
c93edbf538 usb: gadget: don't change ep name for dwc3 while ep autoconfig
As the SDP protocol use the predefined ep num for communication, we can't
change its name hence reset its ep num while do ep autoconfig, this is
only apply for SPL.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Ye Li
71a5732b43 usb: gadget: Add ep_config call back to usb_gadget_ops
Since some new fields in usb_ep structure been moved to usb_ss_ep.
The CDNS3 gadget driver should replies on this operation to bind the
usb_ss_ep with the endpoint descriptor when function layer uses
usb_ep_autoconfig to add endpoint descriptors to gadget. So that
CDNS3 driver can know the EP information and configure the EP once
the set configuration request is received.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-31 14:08:56 +01:00
Pali Rohár
f2fa499883 usb: gadget: Do not export usbd_device_* arrays
Each array is used only in one file (core.c or ep0.c). Move their content
to correct file, mark them as static and do not export out of current file.

This change allows to decrease size of u-boot.bin as more of those strings
are not used.

Signed-off-by: Pali Rohár <pali@kernel.org>
2021-01-31 14:08:56 +01:00
Marek Szyprowski
e47431aa5c thor: add support for the dfu_alt_info reintialization from the flashed script
Reinitialize dfu_env_entities after flashing the 'SCRIPT' entity to
ensure that the potential changes to the 'dfu_alt_info' environment
variable are applied.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-31 14:08:56 +01:00
Andy Shevchenko
6ffc8e2993 f_fastboot: Avoid use-after-free in the global pointer variable
In case of usb_add_function() failure the error path has an issue,
i.e the global pointer variable is assigned to garbage

Fix the above mentioned issue by assigning pointer to NULL.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-31 14:08:56 +01:00
Andy Shevchenko
ff52577c1b f_rockusb: Avoid use-after-free in the global pointer variable
In case of usb_add_function() failure the error path has two issues:
 - the potentially allocated structure isn't getting freed
 - the global pointer variable is assigned to garbage

Fix the above mentioned issues by freeing memory and assigning NULL.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-31 14:08:56 +01:00
Andy Shevchenko
0234609d96 f_rockusb: Use NULL instead of 0 for pointers
get_rkusb() mistakenly uses integers without cast.
Convert them to proper type.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-31 14:08:56 +01:00
Seung-Woo Kim
8b387f112b gadget: f_thor: fix wrong file size cast
Casting 32bit int value directly into 64bit unsigned type causes
wrong value for file size equal or larger than 2GB. Fix the wrong
file size by casting uint32_t first.

Fixes: commit 1fe9ae76b1 ("gadget: f_thor: update to support more than 4GB file as thor 5.0")
Reported-by: Junghoon Kim <jhoon20.kim@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-01-31 14:08:56 +01:00
Tom Rini
b11f634b1c Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
 dtoc: Tidy up and add more tests
 ns16550 code clean-up
 x86 and sandbox minor fixes for of-platdata
 dtoc prepration for adding build-time instantiation
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
 KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
 HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
 59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
 2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
 LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
 =9kN3
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next

Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
2021-01-05 22:34:43 -05:00
Tom Rini
720620e691 Prepare v2021.01-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAl/0YVIACgkQFHw5/5Y0
 tywtEwv/cJWlKgcSnYjuJrxwuJdauUTfXdbUgtCxOtBw/BP4dsKkbGTJPw5q5M+4
 LJJSKyksmJVTX26h1dpkzQjOpWtTDnWqm5CTIxD52oQD7pxK+zCQ9T6S+QbQD0Se
 ogHmZluzFoluxbNgo8tiO52xvMhDO3TVAzxsNDdGfkd5/tAXOHClPc34RmAkdRHU
 VsR89AKdT2q543fiUfrRZYDzdctaNWhRGXMDcJ4+QU/8hQhrpcr8EtHbF+3mWX4K
 pA01pDz150Rn4UI6S2xKEWrjSTHe55fxVj/Qj0rq9z2E/+NqGXemf5s13AR0G/z3
 PqHdVLHzDe64pbOvmyU1pVQ0aMb8vMJUnqx68SQZY3On2c+MjRWQ+7aVVaKOcPGp
 uatk6QMrggHp3Li+3yZrLBE0qPr/sNMVb7mUesdZb6lFd2VIs8siwhfeGXMS+nDI
 xePzsR43Fnn5Q5KIqqvcWUb+TTTqUDUff0wyAU8NBgCaIBIZK8h2ppS1jjnbms0I
 mr8Er2vb
 =Dfum
 -----END PGP SIGNATURE-----

Merge tag 'v2021.01-rc5' into next

Prepare v2021.01-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05 16:20:26 -05:00
Simon Glass
f10643cf8a dm: core: Access device ofnode through functions
At present ofnode is present in the device even if it is never used. With
of-platdata this field is not used, so can be removed. In preparation for
this, change the access to go through inline functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:41 -07:00
Simon Glass
7d14ee443c dm: core: Use dev_has_ofnode() instead of dev_of_valid()
We have two functions which do the same thing. Standardise on
dev_has_ofnode() since there is no such thing as an 'invalid' ofnode in
normal operation: it is either null or missing.

Also move the functions into one place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-05 12:24:41 -07:00
Simon Glass
c23405f817 dm: core: Rename dev_has_of_node() to dev_has_ofnode()
We use 'ofnode' rather than 'of_node' in U-Boot. Rename this function to
fit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:41 -07:00
Simon Glass
0fd3d91152 dm: Use access methods for dev/uclass private data
Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-01-05 12:24:40 -07:00
Marc Ferland
acff02c6dd cosmetic: fix typo in drivers/usb/Kconfig
This commit fixes a simple typo: sPL --> SPL.

Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
2021-01-04 09:10:17 -05:00
Simon Glass
991759196f dm: Drop the unused arg in uclass_find_device_by_seq()
Now that there is only one sequence number (rather than both requested and
assigned ones) we can simplify this function. Also update its caller to
simplify the logic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
b27347f425 usb: Update for new sequence numbers
Use the new sequence number in all cases. Since all devices are assigned
a number when bound, this hack should not be needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
4de51cc25b usb: ehci-mx6: Drop assignment of sequence number
This hack cannot work in the new sequence-numbering scheme. Remove it
while we wait for the maintainer to complete DM conversion as noted in
the existing comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
8b85dfc675 dm: Avoid accessing seq directly
At present various drivers etc. access the device's 'seq' member directly.
This makes it harder to change the meaning of that member. Change access
to go through a function instead.

The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Tom Rini
51f65b506f Merge branch 'master' of git://git.denx.de/u-boot-usb
- r8152, xhci fixes
2020-12-16 17:43:33 -05:00
Hayes Wang
7229440772 eth/r8152: fix the aggregation issue
Remove the redundant setting for USB_RX_EARLY_SIZE. Besides, for
RTL8153B, it is necessary to notify the hardware of the changes
of the aggregation settings.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-12-16 10:27:09 +01:00
Hayes Wang
17d5a461a0 eth/r8152: free previous memory if r8152_eth_probe fail
The r8152_eth_probe() may allocate a memory for ss->dev_priv.
It has to be freed if r8152_eth_probe() fails finally.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-12-16 10:27:09 +01:00
Ran Wang
621ed49d3a usb: xhci: fix lack of short packet event trb handling
For bulk IN transfer, the codes will set ISP flag to request event TRB
being generated by xHC for the case of short packet. So when encountering
buffer-cross-64K-boundary (which we will divide payload and enqueuqe
more than 1 transfer TRB), and the first TRB ends up with a short packet
condition it will trigger an short packet code transfer event per that
flag and cause more than 1 event TRB generated for this transfer.

However, current codes will only handle the first transfer event TRB
then mark current transfer completed, causing next transfer
failure due to event TRB mis-match.

Such issue has been observed on some Layerscape platforms (LS1028A,
LS1088A, etc) with USB ethernet device.

This patch adds a loop to make sure the event TRB for last transfer TRB
has been handled in time.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-12-16 10:27:09 +01:00
Andy Shevchenko
23cdbba8b1 x86: edison: Use dwc3-generic driver for Intel Edison
Use generic Synopsys DesignWare 3 driver on Intel Edison.
For now it's just a stub which allows future refactoring.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-12-16 13:51:24 +08:00
Marek Szyprowski
5c88b6ad40 usb: dwc3-meson-g12a: always configure dr-mode
dwc3_meson_g12a_force_mode() sets the dr-mode of the USB PHY. However
it skips setting the mode if it matches the one done during driver probe
(stored in private structure). This fails if the mode has been changed
to other value and then back to initial one. Fix this by configuring the
dr-mode always, regadless of the one set at the driver probe).

This fixes operation of USB gadget based drivers when they are initialized
for the second time.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-12-14 19:58:54 +01:00
Simon Glass
8a8d24bdf1 dm: treewide: Rename ..._platdata variables to just ..._plat
Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
b012ff1f1b dm: treewide: Update 'auto' declarations to be on one line
Fix up the code style for those declarations that should now fit onto one
line, which is all of them that currently do not.

This is needed for dtoc to detect the structs correctly, at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
d1998a9fde dm: treewide: Rename ofdata_to_platdata() to of_to_plat()
This name is far too long. Rename it to remove the 'data' bits. This makes
it consistent with the platdata->plat rename.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
c69cda25c9 dm: treewide: Rename dev_get_platdata() to dev_get_plat()
Rename this to be consistent with the change from 'platdata'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Simon Glass
41575d8e4c dm: treewide: Rename auto_alloc_size members to be shorter
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 08:00:25 -07:00
Simon Glass
734206dda1 dm: core: Rename device_bind_ofnode() to device_bind()
This is the standard function to use when binding devices. Drop the
'_ofnode' suffix to make this clear.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 07:58:18 -07:00
Patrice Chotard
0f8106f8e0 treewide: Update email address Patrick Delaunay and Patrice Chotard
Update Patrick and my email address with the one dedicated to
upstream activities.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09 10:57:50 +01:00
Jaehoon Chung
05dac23261 usb: gadget: dwc2_udc_otg: return zero when reset property is not present
If reset DT property is not present, -ENOENT is returned.
But it's not really error.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-22 13:18:20 +01:00
Siva Durga Prasad Paladugu
e7f9e1fca9 usb: dwc3: Handle case where setup_phy is not needed
If CONFIG_PHY is not enabled then the dwc3_setup_phy()
returns ENOTSUPP which can be still valid and intentional
so modify error check to handle this -ENOTSUPP.

The same error handling exists in drivers/usb/host/xhci-dwc3.c already
added by commit d648a50c0a ("dwc3: move phy operation to core.c").

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-22 13:18:20 +01:00
Patrick Delaunay
5739ef2bcb usb: dwc2: add "u-boot,force-vbus-detection" for stm32
On some board, the ID pin is not connected so the B session must be
overridden with "u-boot,force_b_session_valid" but the VBus sensing
must continue to be handle.

To managed it, this patch adds a new DT field
"u-boot,force-vbus-detection" to use with "u-boot,force_b_session_valid"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-22 13:18:20 +01:00
Chunfeng Yun
252bd2e3ca usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller
Add an entry in usb_gadget_controller_number() for the MTU3
gadget controller. It is used to bind the USB Ethernet driver.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Chunfeng Yun
e09b88cd08 usb: add MediaTek USB3 DRD driver
This patch adds support for the MediaTek USB3 DRD controller,
its host side is based on xHCI, this driver supports device mode
and host mode.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Chunfeng Yun
d92e866f60 usb: common: add define of usb_speed_string()
There is only declaration of usb_speed_string(), but no definition,
so add it to avoid build error when call it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Chunfeng Yun
a4de6e380f usb: add USB_SPEED_SUPER_PLUS
Add enum USB_SPEED_SUPER_PLUS for USB3.1

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Naoki Hayama
a93cff24b1 usb: musb-new: Fix typo in caution message
%s/Occured/Occurred/

Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-20 00:48:58 +02:00
Chance.Yang
3065680235 usb: dwc2: Fix control OUT transfer issue
In buffer DMA mode, gadget should re-configure EP 0 to received SETUP
packets when doeptsiz.xfersize is equal to a setup packet size(8 bytes)
and EP 0 is in WAIT_FOR_SETUP state.

Since EP 0 is not enabled in WAIT_FOR_SETUP state, SETUP packets is NOT
received from RxFifo and wriiten to the external memory.

Signed-off-by: Chance.Yang <chance.yang@vatics.com>
2020-10-20 00:48:58 +02:00
Heinrich Schuchardt
3fade88686 usb: xhci: avoid type conversion of void *
void * can be assigned to any pointer variable. Avoid unnecessary
conversions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-20 00:48:58 +02:00
Tom Rini
2e84463188 usb: dwc3: Include device_compat.h in dwc3-octeon-glue.c
Necessary for dev_xxx.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-16 09:44:27 -04:00
Sean Anderson
0b4826a9a8 usb: musb-new: mt85xx: Fix not calling dev_err with a device
This driver doesn't use DM (in the correct places), so we use a device and
not a udevice. We also need to include device_compat.h

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-16 09:44:27 -04:00
Sean Anderson
e010524b5d usb: musb-new: Include device_compat.h
This was included, but was ifdef'd out. We also need dm.h for struct
udevice.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-16 09:44:27 -04:00
Sean Anderson
f526aee31f usb: xhci: Include device_compat.h
This header is necessary for the dev_xxx macros.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-16 09:44:27 -04:00
Tom Rini
1c431f118c - mips: octeon: add support for DDR4 memory controller
- mips: octeon: add support for DWC3 USB
 - mips: octeon: add support for booting Linux
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl9+Ie4ACgkQKPlOlyTy
 XBg5lw//TEk6avR1/G4/SKe2Mj2hDQGm2OKjx5BLG6LC/m+It8lk5hFGCKeRTS3m
 zlQ1z4Rki05Q/HW8fZfUSNZTGwbp1n5WJWMx5PRB2T4zYYeoktxQo6dRLbmR9mxL
 2tiZ3QV3qzJafcwy1xdddr2GRGpRyu/sPHnEf5iHtijfT+6MPqSY5E1An+mAGhGb
 IOjzh/OtmO+4Hu9zlp4G5AhNoQBBRRZg+2Sm+kVrzLyM345byucNpnnFiCT1T54M
 iB3KsijBBvcnZ/bR7WMB+x942uFQi9hWdK0ngQhhOO4W1/Mf2ILst44gcxiJQNaf
 dNIEdQxOeL1JDurQL/GSo4cQIr2mXlt3FtTB8RH8sAf9+aMJjlVqYaX3PGUFQJ5B
 z5hnzKWk+jnxwD2F8fAtjqawQY6cBAaF/BDkxFdZcvhIIp9veUNDnk98YYwL7ZjU
 8zRZQSmwI9zmC0kC9C6mmIN+eAbUhT+XDIlVk/USreujDkq9ESWIvo4SdY0+uXjJ
 EJ1Xhqx/H7Qzem+SdbonJjMIWa/5rBnqT/nvCwSGDx64OdvD+F93RHFeyJvp8p1J
 DWNNRZ4rAlrz3z8hDSuIt0M5ENoGWlHjD3nb11CBK/XnobBLhT+8W/b/ffjGcRnn
 dowofymjvGMnhUUkHIb5heyMZaRCZVquGlEOIjrOdc4GNm6EW5Y=
 =v+p3
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2020-10-07' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips

- mips: octeon: add support for DDR4 memory controller
- mips: octeon: add support for DWC3 USB
- mips: octeon: add support for booting Linux
2020-10-07 17:25:25 -04:00
Stefan Roese
92ca2fee08 usb: xhci: octeon: Add DWC3 glue layer for Octeon
This patch adds the glue layer for the MIPS Octeon SoCs. It's ported
mainly from the Linux code.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
e68efa1ecf usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses
Octeon uses mapped addresses for virtual and physical memory. It's not
that easy to calculate the resulting addresses here. So let's remove
this BUG_ON() completely, as it's not really helpful.

Please also note, that BUG_ON() is not recommended any more in the Linux
kernel.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2020-10-07 20:25:57 +02:00
Stefan Roese
72a53ac59b usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()
On MIPS platforms, mapping of the base address is needed. This patch
switches from dev_get_addr() to dev_remap_addr() to get the mapped base
address of the xHCI controller.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2020-10-07 20:25:57 +02:00
Tom Rini
42378e3cd2 bloblist enhancement for alignment
Update ofnode/dev_read phandle function
 sandbox keyboard enhancements and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQHFBAABCAAvFiEE1//at7WoVCu4umzW8Cm2NFgI+6QFAl98qrQRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQ8Cm2NFgI+6Tm5QwAnofBrQ5Y2lwJCUnaratH/J0p5aDXMu37
 SMshRdY4cQPNT1nBFf0fA8UYwTScUla48tPfMO/IxnoMwizxNRZQOH56vcm6w6ie
 73uWlOAl7paw0UGpLYnkuwGC3CoCT7wynTMy0Ap4994alq2pcTK75ra9ODLPn/Sh
 Qg4R4I1VoWbTJT4ZFYcjdMg1+B2hDPd+gVLjjGmOwazncG7aMmpYKJOcscZCuqv8
 Utg30XUxWMxclVPuzXAfREjx+Hhy0AG44ZYv3T44JaOtIAHU4Va/rzqrJRe+pR9V
 YwgjCQhAOuGRswqNJDeg5K8o64jW3vAVULG1HrOZ3gu19ZCmseAH4bNHgiy2SBMz
 CtVtapU+uXjktME2G0vX86Ip8kpxi07p1WeP83TmDFqiGnfEZxn5WH7bYc4l7KSf
 mfWhmrrY5K2ogN5iN8ahc7fGBdHziD+h/Blwn03LgTFHF8f6jxVNJlvjYiya97HN
 1LPk4NNYgPQI3mObL5szQ8FKJ69zSCFk
 =ZqpG
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6oct20' of git://git.denx.de/u-boot-dm

bloblist enhancement for alignment
Update ofnode/dev_read phandle function
sandbox keyboard enhancements and fixes
2020-10-06 13:59:01 -04:00
Patrick Delaunay
89f68302ca dm: add cells_count parameter in *_count_phandle_with_args
The cell_count argument is required when cells_name is NULL.

This patch adds this parameter in live tree API
- of_count_phandle_with_args
- ofnode_count_phandle_with_args
- dev_count_phandle_with_args

This parameter solves issue when these API is used to count
the number of element of a cell without cell name. This parameter
allow to force the size cell.

For example:
  count = dev_count_phandle_with_args(dev, "array", NULL, 3);

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Tom Rini
987ab49366 - generate unique mac address from SoC serial on S400 board
- Add USB support for GXL and AXG SoCs
 - Update Gadget code to use the new GXL and AXG USB glue driver
 - Add a VIM3 board support to add dynamic PCIe enable in OS DT
 - Fix AXG pinmux with requesting GPIOs
 - Add missing GPIOA_18 for AXG pinctrl
 - Add Amlogic PWM driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl97ReAACgkQd9zb2sjI
 SdHHVA/9HuEAzwuJyJoyQcXARIqMwoi6w4qntlmb+VTnxxlKCzLL1Ir68W2+5Y5S
 l+sVkxYDwTmYRs40FOnMdFM1r1Q7IqWwTemqQAcfmGLV+/+MwoDiludGat7JAp1i
 mo/FBcBMLrf3dIJnhCyl2Rezgu06GLCQMAJOlusTDaruUZUHBxPVpAhfRvtlYq1Q
 bCINZfgMcmv8EfReIOE6xGt0+9TKILqQamMByc2ZWdz5UBioqUdQ82arW1rdV/ze
 ATU7vrxNmNlUQnRsMBOry9chbeuNrAhD8sqVloGPUikhf93y0BG7eINmCYrLoXjN
 mopApyWzo3+50GI6It+P9vX6mWVJhd8gAJsvTkRn8ok3flGlRQPmFmAfkjngN/GH
 wdkZpKi/u/ndm2Id7ekZff/Fm/ZmL/kskrRWaWrnuxHNiSNiJvAl+PU7MzCGrgED
 E0MduY1hFpa7wc47xFtI0WKlcdNVQCTRwuZYVIZYlnhXeVupJyQ0dx1ggonlvvIZ
 3cgS2qzd8z2RxKzhnRDvjSfwy7gWFjqpljocyRP4osoWJybJu88MIUFK2GlPdc7x
 3UD/+R88FsIVsQuxzbwBuFZnP+Zo1JqCmspyX4sCeUBDNK4+MqOqIxBZry+q4qso
 usWrTofg2hfxS3FgUL0pQW5GF8JGm4uXcIjbe7fMi47GJ6Lp/ec=
 =rbAX
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20201005' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- generate unique mac address from SoC serial on S400 board
- Add USB support for GXL and AXG SoCs
- Update Gadget code to use the new GXL and AXG USB glue driver
- Add a VIM3 board support to add dynamic PCIe enable in OS DT
- Fix AXG pinmux with requesting GPIOs
- Add missing GPIOA_18 for AXG pinctrl
- Add Amlogic PWM driver
2020-10-06 08:36:10 -04:00
Neil Armstrong
46eddbc58f usb: dwc3: add Amlogic GXL & GXL DWC3 Glue
The USB support was initialy done with a set of PHYs and dwc3-of-simple
because the architecture of the USB complex was not understood correctly
at the time (and proper documentation was missing...).

But with the G12A family, the USB complex was correctly understood and
implemented correctly.

This adds a proper driver for the glue, based on the G12A one, but with
enough changes to require a different driver in U-Boot.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-05 17:59:45 +02:00
Lad Prabhakar
e15e817f3e usb: xhci-rcar: Add support for R8A774A1 SoC
The R8A774A1 is compatible with the generic rcar-gen3-xhci controller.
This patch adds the compatibility flag, to support the xHCI controller.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
a6837a0370 usb: xhci: convert to readx_poll_sleep_timeout()
Use readx_poll_sleep_timeout() to poll the register status

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
23a54ccfb6 usb: xhci: use macros with parameter to fill ep_info2
Use macros with parameter to fill ep_info2, then some macros
for MASK and SHIFT can be removed

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
bf58cf9ab1 usb: xhci: convert to TRB_TX_TYPE()
Use TRB_TX_TYPE() instead of (TRB_DATA_OUT/IN << TRB_TX_TYPE_SHIFT)

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
4312638eaf usb: xhci: convert to TRB_LEN() and TRB_INTR_TARGET()
For normal TRB fields:
use TRB_LEN(x) instead of ((x) & TRB_LEN_MASK);
and use TRB_INTR_TARGET(x) instead of
(((x) & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT)

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
a826d76f2b usb: xhci: convert to TRB_TYPE()
Use TRB_TYPE(p) instead of ((p) << TRB_TYPE_SHIFT)

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
86d1fa17fb usb: xhci: convert to HCS_MAX_PORTS()
Use HCS_MAX_PORTS(p) instead of
((p & HCS_MAX_PORTS_MASK) >> HCS_MAX_PORTS_SHIFT)

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
740820519c usb: xhci: add quirks flag to support MediaTek xHCI 0.96
There some vendor quirks for MTK xHCI 0.96 host controller:
1. It defines some extra SW scheduling parameters for HW
   to minimize the scheduling effort for synchronous and
   interrupt endpoints. The parameters are put into reserved
   DWs of slot context and endpoint context.
2. Its TDS in  Normal TRB defines a number of packets that
   remains to be transferred for a TD after processing all
   Max packets in all previous TRBs.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
e3ea481bee usb: xhci: create one unified function to calculate TRB TD remainder
xhci versions 1.0 and later report the untransferred data remaining in a
TD a bit differently than older hosts.

We used to have separate functions for these, and needed to check host
version before calling the right function.

Now Mediatek host has an additional quirk on how it uses the TD Size
field for remaining data. To prevent yet another function for calculating
remainder we instead want to make one quirk friendly unified function.

Porting from the Linux:
c840d6ce772d("xhci: create one unified function to calculate TRB TD remainder.")
124c39371114("xhci: use boolean to indicate last trb in td remainder calculation")

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Chunfeng Yun
719d7d8df4 usb: xhci: add a member hci_version in xhci_ctrl struct
Add a member to save xHCI version, it's used some times.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01 19:43:05 +02:00
Sean Anderson
7fe8cfdc77 usb: musb-new: sunxi: Fix not calling dev_err with a device
This driver does not use DM, so we need to use a struct device instead of a
struct udevice. Not ideal, but it'll have to do for now.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:54:01 -04:00
Sean Anderson
2667dacb42 usb: dwc3: Don't include asm-generic/io.h
This can conflict with asm/io.h on some archs, and it isn't needed to build
dwc3-generic.c

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:53:59 -04:00
Sean Anderson
44003f88a9 usb: dwc3: ti: Fix not calling dev_err with a device
This driver does not use DM, so use log_xxx instead.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:53:58 -04:00
Sean Anderson
df5eabcbf7 usb: dwc3: Fix not calling dev_xxx with a device
This logs with the device from struct dwc3. Some files also need to include
dm.h so fields in udevice can be accessed.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:53:54 -04:00
Sean Anderson
046ade8103 usb: dwc2: Fix not calling dev_xxx with a device
This adds a dev argument to some functions so dev_xxx always has a device
to log with. In one instance we must use use a different log function when
we are compiled without DM_USB.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:53:52 -04:00
Sean Anderson
df8395a01f usb: cdns3: Fix not calling dev_xxx with a device
ep0.c also need to include dm.h so dev_xxx can access udevice fields.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 08:53:51 -04:00
Tom Rini
67ece26d8b Xilinx changes for v2021.01
arm64:
 - Support for bigger U-Boot images compiled with PIE
 
 microblaze:
 - Extend support for LE/BE systems
 
 zynqmp:
 - Refactor silicon ID detection code with using firmware interface
 - Add support for saving variables based on bootmode
 
 zynqmp-r5:
 - Fix MPU mapping and defconfig setting.
 
 xilinx:
 - Minor driver changes: names alignment
 - Enable UBIFS
 - Minor DT and macros fixes
 - Fix boot with appended DT
 - Fix distro boot
 
 cmd:
 - pxe: Add fixing for platforms with manual relocation support
 
 clk:
 - fixed_rate: Add DM flag to support early boot on r5
 
 fpga:
 - zynqmppl: Use only firmware interface and enable SPL build
 
 serial:
 - uartlite: Enable for ARM systems and support endians
 
 mmc:
 - zynq: Fix indentation
 
 net:
 - gem: Support for multiple phys
 - emac: Fix 64bit support and enable it for arm64
 
 kconfig:
 - Setup default values for Xilinx platforms
 - Fix dependecies for Xilinx drivers
 - Source board Kconfig only when platform is enabled
 - Fix FPGA Kconfig entry with SPL
 - Change some defconfig values
 
 bindings:
 - Add binding doc for vsc8531
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX2x4MgAKCRDKSWXLKUoM
 IZQtAJ9HpNwG5q3nHt9WedzLCTkr3YoLAACeJJ0Wlpp5p5xPzuPmnoo/Vi4MtNQ=
 =yxRo
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.01

arm64:
- Support for bigger U-Boot images compiled with PIE

microblaze:
- Extend support for LE/BE systems

zynqmp:
- Refactor silicon ID detection code with using firmware interface
- Add support for saving variables based on bootmode

zynqmp-r5:
- Fix MPU mapping and defconfig setting.

xilinx:
- Minor driver changes: names alignment
- Enable UBIFS
- Minor DT and macros fixes
- Fix boot with appended DT
- Fix distro boot

cmd:
- pxe: Add fixing for platforms with manual relocation support

clk:
- fixed_rate: Add DM flag to support early boot on r5

fpga:
- zynqmppl: Use only firmware interface and enable SPL build

serial:
- uartlite: Enable for ARM systems and support endians

mmc:
- zynq: Fix indentation

net:
- gem: Support for multiple phys
- emac: Fix 64bit support and enable it for arm64

kconfig:
- Setup default values for Xilinx platforms
- Fix dependecies for Xilinx drivers
- Source board Kconfig only when platform is enabled
- Fix FPGA Kconfig entry with SPL
- Change some defconfig values

bindings:
- Add binding doc for vsc8531
2020-09-24 08:33:47 -04:00
Michal Simek
54fdef242f xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers
Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in
PL and vice versa. That's why change dependencies and do not limit enabling
just for some platforms.

This is follow up patch based on commit 664e16ce99 ("xilinx: kconfig:
Change Kconfig dependencies for Xilinx drivers").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23 10:31:40 +02:00
Tom Rini
2512b3b88b Merge branch '2020-09-14-generic-phy-error-trace' into next
- Add error tracing messages to the generic PHY infrastructure
2020-09-21 16:44:16 -04:00
Robert Marko
74a703a8ad usb: dwc3: Add Qualcomm DWC3 compatible string
Lot of Qualcomm SoC-s use DWC3 controller for both USB2.0 and USB3.0
ports.
Qualcomm has some custom config registers on top of the generic ones,
but for host mode these are not needed.

So lets add the neccessary compatible string.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18 16:20:47 -04:00
Patrick Delaunay
c1e1dbb8f3 usb: musb-new: sunxi: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the dev_err/pr_err can be change to dev_dbg/pr_debug.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
890fc370a9 usb: host: ehci-hcd: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_debug.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
Patrick Delaunay
3b417a7d82 usb: host: ohci: change trace level for phy errors managed by uclass
As the error message is now displayed by generic phy functions,
the dev_err can be change to dev_dbg.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-08 08:46:32 -04:00
yurii.pidhornyi
64af06ce91 fastboot: Fix fastboot reboot fail by changing functions order
It was revealed that when the fastboot_tx_write_str function is called
without the previously initialized fastboot_func->in_req->complete field,
a copy of in_req will be sent to the I/O requests queue without
an initialized field.

Moving a piece of code with the initializing of the
fastboot_func->in_req->complete field above transmit_tx allows to solve
this problem.

Fixes: 65c96757fe "usb: fastboot: Convert USB f_fastboot to shared fastboot"
Signed-off-by: yurii.pidhornyi <yurii.pidhornyi@globallogic.com>
2020-09-01 14:47:43 +02:00
Sherry Sun
405217a033 f_sdp: Change bInterval of interrupt endpoint to 3
Since the USB HID limits the maximum bandwidth(3072) for interrupt
endpoint transfers, when the bInterval set to 1, we can only support 3
boards to run sdp at the same time. In order to support more boards,
change the bInterval of interrupt endpoint to 3, which will not affect
the transmission speed.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Sherry Sun
9e06c5c55a f_sdp: Add EP1_OUT as default data receive pipe in sdp
EP0 has been used to transfer file data in sdp before, but the max
packetsize of ep0 is 64 bytes. So in order to improve the file transfer
speed, here add the EP1_OUT interrupt endpoint which max packetsize is
set to 1024 byte.

After testing, it turns out that using ep1out is twice as fast as using
ep0 while receiving data in sdp.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Peng Fan
b0e9f3e593 f_sdp: Support searching and loading FIT or container image
Add support to f_sdp to search and load iMX8 container image or iMX8M
FIT image by new UUU command SDPV.

When using the SDPV, the uuu will continue to send out data after first
level boot loader used by ROM. This means uuu won't skip to the offset
of the second boot loader, and the padding data before second boot loader
will be sent out. So we have to search the FIT header or container header
in the buffer that SDP received.

Also change to more common method to exit f_sdp handler not depending on
SPL_FIT_FOUND flag because container loader won't set this.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Ye Li
5dee7f0b02 f_sdp: Fix wrong usb request size
Because the buffer length of sdp usb request is 65, we have to allocate
65 bytes not 64 bytes. Otherwise there is potential buffer overflow.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-01 14:47:43 +02:00
Ye Li
d10d429112 f_sdp: Add high speed endpoint descriptor
Add HS endpoint descriptor for SDP. So that we can use high speed endpoint,
and the SDP device can send packet with 512 byte size.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-09-01 14:47:43 +02:00
Jassi Brar
7ed4eac43d usb: max3420: add the gadget driver
MAX3420 implements FullSpeed USB Device over SPI.
Another version MAX3421, also implements USB Host mode.
This driver should be good for the device mode of max3421 as well.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2020-09-01 14:47:43 +02:00
Roman Kovalivskyi
2b2a771b40 fastboot: Add support for 'reboot fastboot' command
Android 10 adds support for dynamic partitions and in order to support
this userspace fastboot must be used[1]. New tool fastbootd is
included into recovery.

Userspace fastboot works from recovery and is launched if:
1) - Dynamic partitioning is enabled
2) - Boot control block has 'boot-fastboot' value into command field
The bootloader is expected to load and boot into the recovery image
upon seeing boot-fastboot in the BCB command. Recovery then parses the
BCB message and switches to fastbootd mode[2].

Please note that boot script is expected to handle 'boot-fastboot'
command in BCB and load into recovery mode.

Bootloader must support 'reboot fastboot' command which should reboot
device into userspace fastboot to accomodate those changes[3].

Another command that bootloader must support[3] is 'reboot recovery'. This
command should simply reboot device into recovery mode.

[1] - https://source.android.com/devices/bootloader/fastbootd
[2] - https://source.android.com/devices/bootloader/fastbootd#unified_fastboot_and_recovery
[3] - https://source.android.com/devices/bootloader/fastbootd#modifications_to_the_bootloader

Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Change-Id: I9d2bdc9a6f6f31ea98572fe155e1cc8341e9af76
2020-09-01 14:47:43 +02:00
Ye Li
1468a1cc72 usb: ci_udc: Add function to remove usb device
When unregister gadget driver in ci_udc, the usb device is not
removed or stop. This causes next "usb start" fails to work.

Add a new interface "usb_remove_ehci_gadget" in usb-uclass to
remove the usb device for DM driver. Using "usb_lowlevel_stop" for
non-DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Ye Li
213fa47dac usb: gadget: Fix controller index in UMS
The usb mass storage (f_mass_storage.c) uses fixed usb index 0,
this causes problem while CDNS3 USB controller index is 1.
Modify the API of fsg to pass the controller index.

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Hayes Wang
3a41086f6a eth/r8152: support RTL8153B/RTL8154B
This is used to support RTL8153B and RTL8154B.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-09-01 14:47:36 +02:00
Hayes Wang
9f6142aa0a eth/r8152: modify rtl_clear_bp function
The original rtl_clear_bp() is used to clear the firmware of both
PLA and USB MCU. The new one could clear the firmware of PLA or
USB independently. It is unnecessary to clear firmware, if there
is no one to be updated.

Besides, clear the firmware by writing the relative registers in
bulk.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-09-01 14:47:36 +02:00
Hayes Wang
16b9417b6a eth/r8152: reset PHY after setting it
Some settings of PHY have to work after resetting PHY.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-09-01 14:47:36 +02:00
Hayes Wang
d74a76234f eth/r8152: reset bmu after disabling Tx/Rx
Reset bmu after disabling Tx/Rx. This is used to clear the FIFO of
Tx/Rx. The remained data may be transferred after Tx/Rx is re-enabled.
And it results in garbage data.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-09-01 14:47:36 +02:00
Ruben Di Battista
67e62c7468 drivers: usb: Fix config indentation
The indentation was messing up with the scripts/build-whitelist.sh that
was marking SYS_USB_EVENT_POLL_VIA_INT_QUEUE (and probably also the
other indented options) erroneously as ad-hoc configure option with the
following error:

```
Error: You must add new CONFIG options using Kconfig
The following new ad-hoc CONFIG options were detected:
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
```
2020-08-27 11:20:33 -04:00
Masahiro Yamada
702e57e113 treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To help this tedious work, this commit converts devfdt_get_addr_ptr()
to dev_read_addr_ptr() by coccinelle. I also removed redundant casts
because dev_read_addr_ptr() returns an opaque pointer.

To generate this commit, I ran the following semantic patch
excluding include/dm/.

  <smpl>
  @@
  type T;
  expression dev;
  @@
  -(T *)devfdt_get_addr_ptr(dev)
  +dev_read_addr_ptr(dev)
  @@
  expression dev;
  @@
  -devfdt_get_addr_ptr(dev)
  +dev_read_addr_ptr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22 08:53:37 -06:00
Oleksandr Andrushchenko
242587dca4 linux/compat.h: Add wait_event_timeout macro
Add  wait_event_timeout - sleep until a condition gets true or a
timeout elapses.

This is a stripped version of the same from Linux kernel with the
following u-boot specific modifications:
- no wait queues supported
- use u-boot timer to detect timeouts
- check for Ctrl-C pressed during wait

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
[trini: Drop atomic_read from gadget/ether.c as this has existed for a
        while and now causes problems]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-14 15:18:30 -04:00
Oleksandr Andrushchenko
486544161f xen: Port Xen hypervisor related code from mini-os
Port hypervisor related code from Mini-OS. This is referencing the code
of Mini-OS from [1] by Huang Shijie and Volodymyr Babchuk which is for
ARM64.
Update essential arch code to support required bit operations, memory
barriers etc.

Copyright for the bits ported belong to at least the following authors,
please see related files for details:

Copyright (c) 2002-2003, K A Fraser
Copyright (c) 2005, Grzegorz Milos, gm281@cam.ac.uk,Intel Research Cambridge
Copyright (c) 2014, Karim Allah Ahmed <karim.allah.ahmed@gmail.com>

[1] - https://github.com/zyzii/mini-os.git

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
[trini: Drop wmb() from musb-net/linux-compat.h now]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-14 15:18:30 -04:00
Patrice Chotard
f3858ce029 usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter
node varaible is used as iterator into ofnode_for_each_subnode()
loop, when exiting of it, node is no more a valid ofnode.
Use dwc3_node instead as parameter of ofnode_valid()

Fixes: ac28e59a57 ("usb: Migrate to support live DT for some driver")
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
2020-08-13 09:19:18 +02:00
Stefan Roese
b5152a653d usb: xhci: Add virt_to_phys() to support mapped platforms
Some platforms, like MIPS Octeon, use mapped addresses (virtual address
!= physical address). On these platforms we need to make sure, that the
local virtual addresses are converted to physical (DMA) addresses for
the xHCI controller. This patch adds the missing virt_to_phys() calls,
so that the correct addresses are used.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2020-08-05 09:30:46 +02:00
Stefan Roese
d96f6e1c0b usb: usb-uclass.c: Drop le16_to_cpu() as values are already swapped
These values are already swapped to CPU endianess, so swapping them
again is a bug. Let's remove the swap here instead.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2020-08-05 09:30:46 +02:00
Stefan Roese
61a1acb55e usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()
xhci_writeq() makes the CPU->LE swapping only when addressing registers
in the xHCI controller address range and not in the local memory (RAM).
We need to use cpu_to_le64() here to ensure that the conversion is done
correctly.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2020-08-05 09:30:46 +02:00
Stefan Roese
543eb12ecd usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)
While trying to use the U-Boot xHCI driver on the MIPS Octeon platform,
which is big endian, I noticed that the driver is missing a few endian
conversion calls. This patch adds these missing endian conversion
calls.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2020-08-05 09:30:46 +02:00
Simon Glass
161786259c usb: Drop dm.h header file
This header file should not be included in other header files. Remove it
and use a forward declaration instead.

Also move the inline function out into a C file. We should not include C
code in headers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03 22:19:54 -04:00
Masahiro Yamada
2548493ab4 treewide: convert devfdt_get_addr() to dev_read_addr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
8613c8d897 treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()
Use the _ptr suffixed variant instead of casting. Also, convert it to
dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE.

One curious part is an error check like follows in
drivers/watchdog/omap_wdt.c:

    priv->regs = (struct wd_timer *)devfdt_get_addr(dev);
    if (!priv->regs)
            return -EINVAL;

devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error.
So, this code does not catch any error in DT parsing.

dev_read_addr_ptr() returns NULL on error, so this error check
will work.

I generated this commit by the following command:

 $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \
   xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/'

I manually fixed drivers/usb/host/ehci-mx6.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25 14:46:57 -06:00
Tom Rini
7208396bbf Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"
This reverts commit 5d3a21df66, reversing
changes made to 56d37f1c56.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 08:42:06 -04:00
Masahiro Yamada
60e7fa8b3b treewide: convert devfdt_get_addr() to dev_read_addr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20 11:37:47 -06:00
Masahiro Yamada
3c12c62ba5 treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()
Use the _ptr suffixed variant instead of casting. Also, convert it to
dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE.

One curious part is an error check like follows in
drivers/watchdog/omap_wdt.c:

    priv->regs = (struct wd_timer *)devfdt_get_addr(dev);
    if (!priv->regs)
            return -EINVAL;

devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error.
So, this code does not catch any error in DT parsing.

dev_read_addr_ptr() returns NULL on error, so this error check
will work.

I generated this commit by the following command:

 $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \
   xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/'

I manually fixed drivers/usb/host/ehci-mx6.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20 11:37:47 -06:00
Masahiro Yamada
b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00
Nicolas Saenz Julienne
0b80371b35 usb: xhci: Add reset controller support
Some atypical users of xhci might need to manually reset their xHCI
controller before starting the HCD setup. Check if a reset controller
device is available to the PCI bus and trigger a reset.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
[mb: squash fix to only build xhci_reset_hw() if CONFIG_DM_BUS]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-07-10 11:49:28 +02:00
Sylwester Nawrocki
61293f519e usb: xhci: Add missing cache flush in the scratchpad array initialization
In current code there is no cache flush after initializing the scratchpad
buffer array with the scratchpad buffer pointers. This leads to a failure
of the "slot enable" command on the rpi4 board (Broadcom STB PCIe
controller + VL805 USB hub) - the very first TRB transfer on the command
ring fails and there is a timeout while waiting for the command completion
event. After adding the missing cache flush everything seems to be working
as expected.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-07-09 15:46:12 +02:00
Tom Rini
5575f79bda Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi into next
- Convert fsl_espi to driver model (Chuanhua)
- Enable am335x baltos to DM_SPI (Jagan)
- Drop few powerpc board which doesn't have DM enabled (Jagan)
2020-06-19 16:25:50 -04:00
Hayes Wang
65f7551b6e eth/r8152: update the firmware
Update the firmware to improve compatibility for none-intel USB
host controller. The more information is as following.

The device has auto-installed driver feature - via switch CD-ROM/NIC
mode. But in some corner cases, it would switch to CD-ROM unexpected.
This issue results in Lan Function Disabled.

While USB PHY transits to P3 from P0 due to the absent of transmitter
control, it would issues undefined signal to its link partner.
Some Down Stream Port misidentify the undefined signal as wakeup
signal. So the link state will not keep in suspend even the system
is idle.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-06-14 13:36:29 +02:00
Michael Walle
c03b7612ea usb: provide a device tree node to USB devices
It is possible to specify a device tree node for an USB device. This is
useful if you have a static USB setup and want to use aliases which
point to these nodes, like on the Raspberry Pi.
The nodes are matched against their hub port number, the compatible
strings are not matched for now.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11 20:52:11 -06:00
Marcin Juszkiewicz
d67df1ee5f kconfig: fix typo for OHCI host and add to DM list
Description said that OHCI is not supported for driver model
while it was converted too.

Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2020-06-02 17:27:04 -04:00
Simon Glass
72be237561 usb: ohci: Add header file for ARCH_DMA_MINALIGN
This is defined in the asm/cache.h header file. Update this header file to
include it so it gets the same value consistently across U-Boot.

This fixes 'usb host' on omapl138_lcdk.

Fixes: 90526e9fba ("common: Drop net.h from common header")
Reported-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-02 13:06:10 -04:00
Tom Rini
9452b7496f Merge tag 'u-boot-rockchip-20200531' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix mmc of path after syncfrom kernel dts;
- Add dwc3 host support with DM for rk3399;
- Add usb2phy and typec phy for rockchip platform;
- Migrate board list doc to rockchip.rst;
- Add rk3399 Pinebook Pro board support;
- Update dram_init in board_init and add memory node in SPL;
2020-05-31 20:07:39 -04:00
Frank Wang
604ab3ecda driver: usb: drop legacy rockchip xhci driver
We have changed to use dwc3 generic driver for usb3.0 host, so the
legacy Rockchip's xHCI driver is not needed, and drop it.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-30 07:38:50 +08:00
Frank Wang
5d422ab26d usb: dwc3: add make compatible for rockchip platform
RK3399 Type-C PHY is required that must hold whole USB3.0 OTG controller
in resetting to hold pipe power state in P2 before initializing the PHY.
This commit fixed it and added device compatible for rockchip platform.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-30 07:38:50 +08:00
Marek Vasut
73021d11d4 usb: ehci-mx6: Print error code on failure
Print the error code if the regulator enable fails, otherwise the error
message is rather useless and confusing.

Signed-off-by: Marek Vasut <marex@denx.de>
2020-05-29 19:23:36 +02:00
Marek Vasut
10bcafb8ac usb: ehci-mx6: Handle fixed regulators correctly
The regulator-fixed would return -ENOSYS when enabled/disabled,
because this operation is not supported, but this is not an error
e.g. on systems where the VBUS cannot be controlled, so if this
is the error code reported by the regulator core, consider it a
success and continue.

Signed-off-by: Marek Vasut <marex@denx.de>
2020-05-29 19:18:55 +02:00
Hayes Wang
3da0291ba9 eth/r8152: fix assigning the wrong endpoint
Although I think it never occurs, the code doesn't make sense, because
it may allow to assign an IN endpoint to ss->ep_out.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-05-29 19:18:55 +02:00
Frank Wang
646979425a usb: dwc3: amend UTMI/UTMIW phy interface setup
Let move 8/16-bit UTMI+ interface initialization into DWC3 core init
that is convenient for both DM_USB and u-boot traditional process.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29 18:13:19 +08:00
Jagan Teki
fafaa02290 usb: dwc3: Enable AutoRetry feature in the controller
By default when core sees any transaction error (CRC or overflow) it
replies with terminating retry ACK (Retry=1 and Nump == 0).

Enabling this Auto Retry feature in controller will make the core send
a non-terminanting ACK upon such transaction errors. That is, ACK TP
with Retry=1 and Nump != 0.

Doing so will give controller a chance to recover from transient error
conditions.

Reference from below Linux commit,

commit <b138e23d3dff> ("usb: dwc3: core: Enable AutoRetry feature
in the controller")

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29 18:13:19 +08:00
Jagan Teki
dc18413adb usb: dwc3: Add disable u2mac linestate check quirk
This patch adds a quirk to disable USB 2.0 MAC linestate check
during HS transmit. Refer the dwc3 databook, we can use it for
some special platforms if the linestate not reflect the expected
line state(J) during transmission.

When use this quirk, the controller implements a fixed 40-bit
TxEndDelay after the packet is given on UTMI and ignores the
linestate during the transmit of a token (during token-to-token
and token-to-data IPGAP).

On some rockchip platforms (e.g. rk3399), it requires to disable
the u2mac linestate check to decrease the SSPLIT token to SETUP
token inter-packet delay from 566ns to 466ns, and fix the issue
that FS/LS devices not recognized if inserted through USB 3.0 HUB.

Reference from below Linux commit,

commit <65db7a0c9816> ("usb: dwc3: add disable u2mac linestate
check quirk")

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29 18:13:19 +08:00
Frank Wang
b34f8b5de0 usb: dwc3: add dis_u2_freeclk_exists_quirk
Add a quirk to clear the GUSB2PHYCFG.U2_FREECLK_EXISTS bit,
which specifies whether the USB2.0 PHY provides a free-running
PHY clock, which is active when the clock control input is active.

Refer to commit 27f83eeb6b42("usb: dwc3: add dis_u2_freeclk_exists_quirk")
in Linux Rockchip Kernel.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29 18:13:19 +08:00
Frank Wang
7bb6270839 usb: dwc3: add dis_enblslpm_quirk
Add a quirk to clear the GUSB2PHYCFG.ENBLSLPM bit, which controls
whether the PHY receives the suspend signal from the controller.

Refer to commit ec791d149bca("usb: dwc3: Add dis_enblslpm_quirk")
in Linux Kernel.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29 18:13:19 +08:00
Hayes Wang
2cff87f7ab eth/r8152: fix typo in register name
The PAL_BDC_CR should be PLA_BDC_CR.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-05-22 15:22:37 +02:00
Chunfeng Yun
58221d7e87 usb: dwc3: fix NULL pointer issue
The phy_bulk pointer *usb_phys is used before allocated,
fix it by using a phy_bulk variable instead in
xhci_dwc3_platdata struct

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2020-05-22 15:22:36 +02:00
Adam Ford
94ed66194f usb: ehci-omap: Add Support for DM_USB and OF_CONTROL
The omap3.dtsi file shows the usbhshost node with two sub-nodes
for ohci and ehci.  This patch file creates the usbhshost, and
pulls the portX-mode information.  It then locates the EHCI
sub-node, and initializes the EHCI controller with the info
pulled from the usbhshost node.

There is still more to do since there isn't an actual link
between the 'phys' reference and the corresponding phy driver,
and there is no nop-xceiv driver yet.

In the meantime, the older style reference to
CONFIG_OMAP_EHCI_PHYx_RESET_GPIO is still needed to pull
the phy out of reset until the phy driver is completed and the
phandle reference is made.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-22 15:22:35 +02:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
eb41d8a1be common: Drop linux/bug.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
e6f6f9e648 common: Drop part.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Simon Glass
c3dc39a2f8 arm: Don't include common.h in header files
It is bad practice to include common.h in other header files since it can
bring in any number of superfluous definitions. It implies that some C
files don't include it and thus may be missing CONFIG options that are set
up by that file. The C files should include these themselves.

Update some header files in arch/arm to drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:54:24 -04:00
Trevor Woerner
18138ab203 rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
bb0fb4c0f4 rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
Have this symbol follow the pattern of all other such symbols.
This patch also removes a TODO from the code.

Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
b16a331697 rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
Have this symbol follow the pattern of all other such symbols.
This patch removes a TODO from the code.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Patrick Delaunay
bcd677f246 usb: gadget: g_dnl: add function g_dnl_set_product
Add a function g_dnl_set_product to change the Product string used in USB
enumeration in any command based on download gadget.

If the function is called with NULL pointer, the product string is set to
the default value (product[] = "USB download gadget").

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Siva Durga Prasad Paladugu
648856ac19 usb: dwc3: Add versal compatibility string to dwc3 glue ids
Xilinx Versal platform uses dwc3 and hence its compatible string
needs to be added to dwc3 glue ids.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-12 09:27:14 +02:00
Jagan Teki
73ca0140e1 usb: dwc3: add dis_del_phy_power_chg_quirk
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit,
which specifies whether disable delay PHY power change
from P0 to P1/P2/P3 when link state changing from U0
to U1/U2/U3 respectively.

Reference from below Linux commit,

commit <00fe081dc3a3> ("usb: dwc3: add dis_del_phy_power_chg_quirk")

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-12 09:27:14 +02:00
Peng Fan
0bd3d911df usb: mx6: add fuse check
Add fuse check for USB. If the fuse indicates the module
will not work in the SoC, let's fail the initialization.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:21:27 +02:00
Stefano Babic
b77d0292ca Merge branch 'master' of git://git.denx.de/u-boot 2020-05-10 13:03:56 +02:00
Frank Li
8f95c0105f usb: gadget: sdp: use CONFIG_SDP_LOADADDR as default load address
If SDP_WRITE and SDP_JUMP addr is zero, use CONFIG_SDP_LOADADDR
as default address

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:31:34 +02:00
Chunfeng Yun
7410283415 xhci: mediatek: Add support for MTK xHCI host controller
This patch is used to support the on-chip xHCI controller on
MediaTek SoCs, currently control/bulk/interrupt transfers are
supported.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
cf67e45179 usb: dwc2_udc_otg: use the phy bulk API to get phys
Use the phy bulk API to get a group of phys

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
6dfb8a8052 usb: dwc3: use the phy bulk API to get phys
Get a group of phys by the phy bulk API

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Tom Rini
221c4d9826 - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs
- add GXBB USB PHY driver
 - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards
 - fix USB PHYs Power-Up on on VIM3/VIM3L boards
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl6n6mUACgkQd9zb2sjI
 SdFBsw//VP2GwJZDDVR7WRSPq2I1EXK8vqwzVhOX40oQXp+RaLZCvdnAyPwRr0Gw
 ZJSPTh5PzTZcbK3eId7tPA4uTHkkhlNyzh2nJHCsR5t8dmbKaKBM8xhkzbv3Dt1k
 bLCu42gvActHI3eucFNIpCGXAsK6VNp4A/lsW04Ukc6c9MPk1OkvpbFBaHYsiIh4
 AtAWLX77d4VX+RxTlMz3oRr2Z0+MjQqHWrFkkdq9btn3OESuw7fNTCtUfFCMhEvd
 HfXwyhVX0LIuEH4OOIj19T8ilEYEYhPWhqnZC+YuDc95EymtVZQmTLp1D4NSsCzs
 fBiswAhrd9Dot/jZearMmT+FXFPitsdewwSIlpNgmzMIGZWRRWUP6yKAHPj2OCNF
 Epuu3jdITOYBQS8cgnR1lmN1s0jJ+RYHm7LT1c0ekHRCmcfLMLdbuMtImzllXtvl
 GYx8Fu0qw4Rm0djHGQ2gDSDinYLEzb8pqhoqmfVTN/Vq0L2LDxV0sC5xGM1m2X80
 BHte8hPPLAvkRnb8EPscdt7lSWi1admc0N+0Sa2AQ6S/W7g8oLIXYIfgwcPkwUEZ
 Y7hUenqE+RJ3Do7xnrYre+JH4jIK00bZIxDvHuIm9KxtpDYIMF7hic1T2Q3jmkgB
 H6QpueLM62uUG8ejj0eQO9UXiSsVnax5TZ639BbkZ8wXHMqNQHw=
 =e10O
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200428' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- fix sd-emmc controller A init on G12A/G12B/SM1 SoCs
- add GXBB USB PHY driver
- enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards
- fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28 10:09:16 -04:00
Patrice Chotard
f3bc736e41 usb: host: dwc3-sti-glue: Use UCLASS_NOP instead of UCLASS_MISC
dwc3-sti-glue has been broken since MISC uclass has been
modified to scan DT sub-nodes after bind.
Fixing it by a using the no-op uclass.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-28 13:52:52 +02:00
Patrick Delaunay
245847f065 usb: host: dwc2: add trace to have clean usb start
Solve issue for the display of "usb start" command on stm32mp1
because one carriage return is missing in DWC2 probe.

Before the patch:

STM32MP> usb start
starting USB...
Bus usb-otg@49000000:    Bus usbh-ehci@5800d000:   USB EHCI 1.00

after the patch:

STM32MP> usb start
starting USB...
Bus usb-otg@49000000: USB DWC2
Bus usbh-ehci@5800d000: USB EHCI 1.00

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28 13:52:52 +02:00
Patrick Delaunay
6600438166 usb: host: dwc2: force reset assert
Assert reset before deassert in dwc2_reset;
this patch solve issues when the DWC2 registers are already
initialized with value incompatible with host mode.

Force a hardware reset of the IP reset all the DWC2 registers at
default value, the host driver start with a clean state
(Core Soft reset doen in dwc_otg_core_reset is not enought
 to reset all register).

The error can occurs in U-Boot when DWC2 device gadget driver
force device mode (called by ums or dfu command, before to execute
the usb start command).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28 13:52:52 +02:00
Patrick Delaunay
0bc632c9b1 usb: host: dwc2: add clk support
Add support for clock with driver model.

This patch don't added dependency because when CONFIG_CLK
is not activated the clk function are stubbed.

Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28 13:52:52 +02:00
Patrick Delaunay
e17a4bf198 usb: host: dwc2: add phy support
Use generic phy to initialize the PHY associated to the
DWC2 device and available in the device tree.

This patch don't added dependency because when CONFIG_PHY
is not activated, the generic PHY function are stubbed.

Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28 13:52:52 +02:00
Heinrich Schuchardt
3c425fc0ef usb: ether: avoid NULL check before free()
free() checks if its argument is NULL. Do not duplicate this check.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-28 13:52:52 +02:00
Heinrich Schuchardt
cff0144e4c usb: avoid NULL check before free
The free() function checks if the argument is NULL.
Do not duplicate this check.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-28 13:52:52 +02:00
Neil Armstrong
3dc4f83970 usb: dwc3-meson-g12a: add power-on/off of the PHYs
Power on/off the PHYs to enable power to the USB ports, fixing USB support
on Khadas VIM3/VIM3L boards.

The G12A USB complex has at least 2 USB2 PHYs, but one is muxed between the
DWC2 and DWC3 controller and the other one directly connected to the DWC3
controller. The USB3+PCIe combo PHY is muxed between the DWC3 controller
and a DW-PCIE controller.
All PHYs are optional, but it's type (usb2/usb3) and position are important
to determine it's capabilities, thus they are stored in a fixed size
array and the phy-name determines it's position, it's position determining
it's type and functionnalities.
This is why we need to loop over the array to power on all the DT provided
PHYs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-04-28 10:23:10 +02:00
Rayagonda Kokatanur
9cadf05958 drivers: usb: host: Add BRCM xHCI driver
Base driver for Broadcom xHCI controllers

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
2020-04-13 13:48:41 +02:00
Kever Yang
2517deafc2 usb: Migrate to support live DT for some driver
Use ofnode_ instead of fdt_ APIs so that the drivers can support live DT.
This patch updates usb_get_dr_mode() and usb_get_maximum_speed() to use
ofnode as parameter instead of fdt offset. And all the drivers who use
these APIs update to use live dt APIs at the same time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-13 13:48:30 +02:00
Kever Yang
0148bbe8f3 usb: ehci-msm: Use dev interface to get device address
Use dev_read_addr_ptr() instead of devfdt_get_addr() so that we can support
live DT.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2020-04-13 13:48:30 +02:00
Kever Yang
5c17030358 usb: dwc3-of-simple: Drop redundant inclding header file
The fdtdec.h is no use in this file, remove the include code.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-13 13:48:30 +02:00
Marek Vasut
31232de07e usb: Keep async schedule running only across mass storage xfers
Rather than keeping the asynchronous schedule running always, keep it
running only across USB mass storage transfers for now, as it seems
that keeping it running all the time interferes with certain control
transfers during device enumeration.

Note that running the async schedule all the time should not be an
issue, especially on EHCI HCD, as that one implements most of the
transfers using async schedule.

Note that we have usb_disable_asynch(), which however is utterly broken.
The usb_disable_asynch() blocks the USB core from doing async transfers
by setting a global flag. The async schedule should however be disabled
per USB controller. Moreover, setting a global flag does not prevent the
controller from using the async schedule, which e.g. the EHCI HCD does.

This patch implements additional callback to the controller, which
permits it to lock the async schedule and keep it running across
multiple transfers. Once the schedule is unlocked, it must also be
disabled. This thus prevents the async schedule from running outside
of the USB mass storage transfers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Tested-by: Tom Rini <trini@konsulko.com> [omap3_beagle, previously failing]
2020-04-09 15:26:59 -04:00
Andre Przywara
48313fe510 sunxi: Move common defconfig options to Kconfig
Some config symbols are found in *almost* every _defconfig file for
Allwinner boards, because those options are actually a platform choice,
and not a per-board decision.
Some of these options are older, some have recently been added.

Move those options to be set for all Allwinner boards in their
respective Kconfig files.

The rationales are as follows:
- NR_DRAM_BANKS: All Allwinner SoC map DRAM at one contiguous region of
  address space only, starting at 1 GB. So it's always one bank.
- SPL_{DOS,EFI}_PARTITION: The Allwinner SPL does only support raw MMC
  accesses, we don't care about filesystems or partitions in there, so
  there is no need to define those symbols at all.
- USE_PREBOOT: We start USB early when a keyboard is configured, using the
  preboot env variable, so we need to set this variable.
- SYS_RELOC_GD_ENV_ADDR: We don't specify any ENV_ADDR, so need this
  symbol to be set (according to 8d8ee47e03).
- SYS_USB_EVENT_POLL_VIA_INT_QUEUE: According to commit eab9433aa5,
  specifying this reduces the latency of the USB keyboard handling, so
  this was formerly enabled in config headers for all Allwinner boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # Amarula A64-Relic
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-18 18:25:00 +05:30
Seung-Woo Kim
491cabf067 gadget: f_thor: add missing line breaks for pr_err()
After the commit 9b643e312d ("treewide: replace with error()
with pr_err()"), there are pr_err() usages without line break. Add
missing line breaks for pr_err() used in f_thor.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2020-03-01 21:58:54 +01:00
Andy Shevchenko
53d9bd4a56 dfu: Reset timeout in case of DFU request
In case dfu command is being executed with timeout option,
the timer may expire in the middle of DFU operation. If there
is DFU request coming, we may simple reset timeout value
to prevent aborting of ongoing DFU operation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
2020-03-01 21:58:54 +01:00
Masahiro Yamada
9d86b89c59 dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>
The implementation of dma_map_single() and dma_unmap_single() is
exactly the same for all the architectures that support them.

Factor them out to <linux/dma-mapping.h>, and make all drivers to
include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>.

If we need to differentiate them for some architectures, we can
move the generic definitions to <asm-generic/dma-mapping.h>.

Add some comments to the helpers. The concept is quite similar to
the DMA-API of Linux kernel. Drivers are agnostic about what is
going on behind the scene. Just call dma_map_single() before the
DMA, and dma_unmap_single() after it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19 21:27:30 +08:00
Masahiro Yamada
950c596867 dma-mapping: fix the prototype of dma_unmap_single()
dma_unmap_single() takes the dma address, not virtual address.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19 21:27:30 +08:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
61b29b8268 dm: core: Require users of devres to include the header
At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05 19:33:46 -07:00
Tom Rini
c95215a6ca - DFU support file operations lager then the default max size
- add dfu support to dwc2 for bcm2835
 - enable DFU for RPi4
 - Fix RPi4 memory map to include the genet device
 - add driver for the genet ethernet device
 - enable network support in RPi4 config
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl43/6QSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+Fq0P/1vCbkiRgOtOIMPh/b7qWUVweTdgwcbf
 9v8Qa2IKc0FYgjYjIMjihfbvF7R0vGaOUX13yKDV/3v42cpLkOxBauCYasiXznI+
 9hBwKfOFPzLpSz3SJ+LRn0XhHSAZ1jcT19pgaPmA5Pry6l7JEai4M3JFeYeJRWOt
 N1EFqxqqeAQ+eXdQWXTKh6AiFEia7aL4OVcU5HY9BMyDW8H13gvNejoeSXNKLupM
 GGHJfG/TRKHP5UJoqH+I9XFdkUKfN4e1oWpxl7nA5HpvRfFgO+AQm9OgM2xumnGp
 +4kS4T5FexCrcQ37m5fG9+LSxk2PB8+P0kmfImaO54lUdAtjB+iqg4RUB7eN/vLH
 37S13AB7T8OTjbe8tlLCjGDXQ/8xU+NDZQsE9GnRmaj2UbK57hJPW6kTRgwK4BEZ
 l0Rr9RrHlhrBvywHMII11fhH+wVO0R29GFvRZSSscRqvKq61FF//r8hNQX7xtErf
 +OIEgIcEt9bbLyq7LJQ+2xRdQj4UgSv5/poaaoWX+uY4+yUElbiPpTJLN2oslZ8x
 liUKigWmTgF8G1ukalyA1u3xj0kyfl4QCxoJpNqoaHg9sel0S5igGE0dLzKXUKSw
 1A7BCT0rO/FhoMxc7P4kHjpIKlw6Tatw1wJY3g8VzRgEsXlTawNszadO1jswBmHV
 9XFk+iH6f/rg
 =Sv9b
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi

- DFU support file operations lager then the default max size
- add dfu support to dwc2 for bcm2835
- enable DFU for RPi4
- Fix RPi4 memory map to include the genet device
- add driver for the genet ethernet device
- enable network support in RPi4 config
2020-02-05 07:18:12 -05:00
Vignesh Raghavendra
bf16a7be90 usb: cdns3: ep0: Invalidate cache before reading Setup Packet
Invalidate dcache line before accessing Setup Packet contents. Otherwise
driver will see stale content on non coherent architecture.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-02 18:19:52 +01:00
Marek Szyprowski
c4d08cb9b1 usb: dwc2_udc_otg: add bcm2835 SoC (Raspberry Pi4) support
Broadcom 2835 SoC requires special conversion of physical memory addresses
for DMA purpose, so add needed wrappers to dwc2_udc_otg driver. Also extend
the list of compatible devices with 'brcm,bcm2835-usb' entry. This allows
to use USB gadget drivers (i.e. DFU) on Raspberry Pi4 boards.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-01-29 18:30:33 +01:00
mingming lee
7d017d607e usb: musb-new: mt85xx: add musb-new gadget driver.
Using musb-new structure for mt85xx gadget driver.
Add gadget driver dts for mt8518 SoCs.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25 12:04:36 -05:00
Tom Rini
07add22cab Merge tag '2020-01-20-ti-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
K3 J721E:
* DMA support.
* MMC and ADMA support.
* EEPROM support.
* J721e High Security EVM support.
* USB DT nodes

K3 AM654:
* Fixed boot due to pmic probe error.
* USB support and DT nodes.
* ADMA support

DRA7xx/AM57xx:
* BBAI board support
* Clean up of net platform code under board/ti

AM33/AM43/Davinci:
* Reduce SPL size for omap3 boards.
* SPL DT support for da850-lcdk
* PLL divider fix for AM335x
2020-01-20 14:54:55 -05:00
Vignesh Raghavendra
cab4e275dd dwc3-generic: Add support for AM654 USB controller
AM654 has DWC3 USB controller that is very similar to other TI SoCs. Add
a new compatible to enable the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:29 +05:30
Simon Glass
db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00
Simon Glass
220a3a44a3 common: Rename and move source()
This function has a very generic name which does not adequately describe
its purpose. Rename it and move it to image.h, since it relates to reading
a script from an image.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:35 -05:00
Simon Glass
1058eec0f4 usb: Drop use of BUG_ON() and WARN_ON()
These macros use __FILE__ which inserts the full path of the object file
into U-Boot, thus increasing file size. Drop these usages.

An older version of this patch was submitted here:

http://patchwork.ozlabs.org/patch/1205784/

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07 16:02:38 -07:00
Jagan Teki
5c207282f5 usb: dwc3: Fix UTMI/UTMIW phy interface initialization
DWC3 support phy interfaces like 8/16-bit UTMI+. phy interface
initialization code would handle them properly along with UNKNOWN
type by default if none of the user/board doesn't need to use the
phy interfaces at all.

The current code is masking the 8/16-bit UTMI+ interface bits globally
which indeed effect the UNKNOWN cases, therefore it effects the platforms
which are not using phy interfaces at all.

So, handle the phy masking bits accordingly on respective interface
type cases.

Fixes: 6b7ebff001 ("usb: dwc3: Add phy interface for dwc3_uboot")
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-21 20:35:16 +01:00
Vignesh Raghavendra
bdf30e8490 usb: cdns3: ep0: Fix build warnings related to cache ops
Since, commit 62f9b65447 ("common: Move older CPU functions to their own header")
cache ops functions are declared in a separate header. Include the same
to avoid build warnings.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-12-21 20:35:16 +01:00
Simon Glass
288b29e44d common: Move command functions out of common.h
Move these functions into the command.h header file which is a better fit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:02 -05:00
Simon Glass
1eb69ae498 common: Move ARM cache operations out of common.h
These functions are CPU-related and do not use driver model. Move them to
cpu_func.h

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:24:58 -05:00
Simon Glass
f516fd99ec common: Move serial_printf() to the serial header
Move this function header to serial.h since this function is clearly
related to serial. The function itself stays in console.c since we don't
have a single serial file. DM and non-DM each has a separate file so we
would have to either create a new common serial file, or repeat the
function in both serial.c and serial-uclass.c, neither of which seem
worthwhile.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:10 -05:00
Heinrich Schuchardt
12f1e7908a dm: test: usb: rework keyboard test
Allow the unit test to pass full 8 byte scan code sequences to the USB
keyboard emulation driver and to parse multi-byte escape sequences.

The following features are not yet tested:

* LED status
* caps-lock
* num-lock
* numerical pad keys

The following features are not yet implemented by the USB keyboard
driver and therefore not tested:

* modifiers for non-alpha-numeric keys, e.g. <SHIFT><TAB> and <ALT><F4>
* some special keys, e.g. <PRINT>
* some modifiers, e.g. <ALT> and <META>
* alternative keyboard layouts

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-25 13:28:53 +01:00
Heinrich Schuchardt
87e91bccae usb: kbd: implement special keys
Provide support for F1-F12, Insert, Delete, Home, End, Page Up, Page Down.

As this leads to a size increase provide a customizing setting
CONFIG_USB_KEYBOARD_FN_KEYS.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-25 13:28:53 +01:00
Tom Rini
9a0cbae22a Merge tag 'u-boot-rockchip-20191124' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Clean vid/pid in Kconfig and add fastboot for rk3399
- add 'u-boot, spl-fifo-mode' for mmc
- Use FIT generator for rk3229 optee and rk3368 ATF
- fan53555: add support for Silergy SYR82X and SYR83X
2019-11-23 20:50:11 -05:00
Jagan Teki
3d3b83a573 gadget: rockchip: Add rk3399 USB_GADGET_PRODUCT_NUM
Add 0x330c for rk3399 gadget product number.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
6b7ebff001 usb: dwc3: Add phy interface for dwc3_uboot
U-Boot has two different variants of dwc3 initializations,
- with dm variant gadget, so the respective dm driver would
  call the dwc3_init in core.
- with non-dm variant gadget, so the usage board file would
  call dwc3_uboot_init in core.

The driver probe would handle all respective gadget properties
including phy interface via phy_type property and then trigger
dwc3_init for dm-variant gadgets.

So, to support the phy interface for non-dm variant gadgets,
the better option is dwc3_uboot_init since there is no
dedicated controller for non-dm variant gadgets.

This patch support for adding phy interface like 8/16-bit UTMI+
code for dwc3_uboot.

This change used Linux phy.h enum list, to make proper code
compatibility.

Cc: Marek Vasut <marex@denx.de>
Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
b032061405 gadget: rockchip: Add rk3128 USB_GADGET_PRODUCT_NUM
Add 0x310c for rk3128 gadget product number.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
132b012ede gadget: rockchip: USB_GADGET_PRODUCT_NUM
Rockchip support differnet or common gadget product number
between Rockchip SoCs like,

0x310a - rk3036
0x320a - rk3229, rk3288
0x330a - rk3328

So, select them on Kconfig based on platform specific
config defined.
   
This eventually drop the explicit configs defined in
supporting board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
89cbceb388 gadget: Select USB_GADGET_VENDOR_NUM for rockchip
Gadget vendor number, 0x2207 is common across all platfroms
supported in Rockchip SoC.

So, select the same number globally, if ARCH_ROCKCHIP.

This eventually drop the explicit configs defined in supported
board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
89e311d494 gadget: Select USB_GADGET_MANUFACTURER for rockchip
Select the gadget manufacturer as 'Rockchip' for
all rockchip platform SoC's.

This eventually drop the explicit defined added
on supported board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Simon Goldschmidt
7dc0ac6015 usb: dwc2: fix possible alignment issues
Since upgrading to gcc9, warnings are issued:
"taking address of packed member of ‘...’ may result in an unaligned
pointer value"

Fix this by converting dwc2_fifo_read to use unaligned access since packed
structures may be on an unaligned address, depending on USB hardware.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-22 01:25:40 +01:00
Simon Goldschmidt
616ebd8b9c usb: composite: fix possible alignment issues
Since upgrading to gcc9, warnings are issued:
"taking address of packed member of ‘...’ may result in an unaligned
pointer value"

Fix this by converting two functions to use unaligned access since packed
structures may be on an unaligned address, depending on USB hardware.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-22 01:25:36 +01:00
Vignesh Raghavendra
e5521b1c6f usb: cdns3: Fix include file path
xhci.h has now been moved to include/usb/ directory. Therefore, update the
path in the Cadence USB drivers.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-19 16:07:14 +01:00
Kever Yang
e76943ca6f rockchip: usb: Migrate to use ofnode
Migrate to use ofnode_* instead of fdt_* so that we may able to use live
dt for usb udc driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Chunfeng Yun
e0891bb679 usb: xhci: support 1.1 or later version
The xHCI 1.1 version also need set Transfer Type field

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-08 11:09:08 +01:00
T Karthik Reddy
f69257baa8 usb: composite: add BOS descriptor support to composite framework
To add usb-3.0 support to peripheral device add BOS & SS capability
descriptors to gadget composite framework.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
2019-11-07 00:24:59 +01:00
Vignesh Raghavendra
d80effb184 usb: gadget: Add gadget_is_cdns3() macro
Add a new bcdDevice entry for Cadence USB gadget controller similar to
other controller and add gadget_is_cdns3() macro as well.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Vignesh Raghavendra
a9ca4193bd usb: cdns3: Add TI wrapper driver for CDNS USB3 controller
Add driver to handle TI specific wrapper for Cadence USB3 controller
present on J721e SoC. Based on Linux driver for the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Vignesh Raghavendra
927c22b0da usb: cdns3: gadget: Implement udc_set_speed() callback
Implement udc_set_speed() callback to limit Controller's speed to
high-speed/full-speed when working with gadgets that are high-speed or
full-speed only

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Vignesh Raghavendra
7e91f6ccdc usb: Add Cadence USB3 host and gadget driver
Add support for USB3 host and gadget driver. This is a direct sync of
Linux kernel Cadence USB stack that from v5.4-rc1 release.
Driver has been modified so that it compiles without errors against
U-Boot code base.
Features not required for U-Boot such as scatter-gather DMA and OTG
interrupt handling has been dropped.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
[jjhiblot@ti.com: Add PHY support]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Sherry Sun
8d94e184ff usb: udc: Introduce ->udc_set_speed() method
This patch was copied from kernel commit: 67fdfda4a99ed.

Sometimes, the gadget driver we want to run has max_speed lower than
what the UDC supports. In such situations, UDC might want to make sure
we don't try to connect on speeds not supported by the gadget
driver because that will just fail.

So here introduce a new optional ->udc_set_speed() method which can be
implemented by interested UDC drivers to achieve this purpose.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Vignesh Raghavendra
77dcbdf3c1 usb: gadget: Add match_ep() op to usb_gadget_ops
Add match_ep() op to usb_gadget_ops similar to Linux kernel which is
useful in finding a suitable ep match for the function driver. This will
avoid adding more gadget_is_xxx() handling code to usb_ep_autoconfig().

Also sync usb_ep_caps struct thats is usually used in the match_ep()
callback by the gadget controller driver

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00
Marek Vasut
02b0e1a36c usb: ehci-hcd: Keep async schedule running
Profiling the EHCI driver shows a significant performance problem in
ehci_submit_async(). Specifically, this function keeps enabling and
disabling async schedule back and forth for every single transaction.
However, enabling/disabling the async schedule does not take effect
immediatelly, but instead may take up to 1 mS (8 uFrames) to complete.

This impacts USB storage significantly, esp. since the recent reduction
of maximum transfer size to support more USB storage devices. This in
turn results in sharp increase in the number of ehci_submit_async()
calls. Since one USB storage BBB transfer does three such calls and
the maximum transfer size is 120 kiB, the overhead is 6 mS per 120 kiB,
which is unacceptable.

However, this overhead can be removed simply by keeping the async
schedule running. Specifically, the first transfer starts the async
schedule and then each and every subsequent transfer only adds a new
QH into that schedule, waits until the QH is completed and does NOT
disable the async schedule. The async schedule is stopped only by
shutting down the controller, which must happen before moving out
of U-Boot, otherwise the controller will corrupt memory.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
2019-10-31 12:13:40 +01:00
Marek Szyprowski
fd15b58c1a dwc3: flush cache only if there is a buffer attached to a request
Calling cache flush on invalid buffer, even with zero length might cause
an exception on certain platforms.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2019-10-31 12:12:31 +01:00
Marek Szyprowski
ade08db899 gadget: f_thor: properly enable 3rd endpoint defined by the protocol
This is needed to make Windows THOR flash tool happy, because it
starts sending data only when interrupt packet is received on the 3rd
endpoint.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2019-10-31 12:12:31 +01:00
Vignesh Raghavendra
d624434f5e dwc3-generic: Don't fail probe if clk/reset entries are absent
Some boards don't populate clk/reset entries as these are are optional
as per binding documentation. Therefore, don't fail driver probe if
clk/reset entries are absent in DT.

This fixes fastboot failures seen due to enabling of CONFIG_CLK on AM57xx

Fixes: e8e683d33b ("board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer")
Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-10-31 12:11:24 +01:00
Ye Li
235f5e158e ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULP
The ULP has two USB controllers. These two controllers have similar NC
registers layout as i.MX7D. But OTG0 uses UTMI PHY simliar as i.MX6, not
the integrated PHY on i.MX7D. The OTG1 needs off-chip HSIC PHY or ULPI PHY
to work.

This patch only supports OTG0 with UTMI PHY.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-24 15:31:13 +02:00
Igor Opaniuk
1198a104d3 usb: ehci-mx6: Fix bus enumeration for iMX7 SoCs
This fixes the issues with calculation of controller indexes in
ehci_usb_bind() for iMX7, as USB controllers on iMX7 SoCs aren't
placed next to each other, and their addresses incremented by 0x10000.

Example of USB nodes for iMX7S/D:

usbotg1: usb@30b10000 {
    compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
    reg = <0x30b10000 0x200>;
           ^^^^^^^^^^
....
usbotg2: usb@30b20000 {
    compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
    reg = <0x30b20000 0x200>;
           ^^^^^^^^^^
....

usbh: usb@30b30000 {
    compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
    reg = <0x30b30000 0x200>;
           ^^^^^^^^^^
....

Which was leading to usb enumeration issues:
Colibri iMX7 # usb start
starting USB...
Bus usb@30b10000: USB EHCI 1.00
Bus usb@30b20000: probe failed, error -22
scanning bus usb@30b10000 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Fixes: 501547cec1("usb: ehci-mx6: Fix bus enumeration for DM case")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-10-24 15:31:13 +02:00
Jean-Jacques Hiblot
3e6ab7327f usb: dwc3: Kconfig: get rid of obsolete mode selection
The mode selection for the DWC3 is kind of obsolete. The driver does not
have to be host only or gadget only. This choice is confusing.
All the remaining callers of dwc3_uboot_init() explicitly set dr_mode
before calling the function, so none rely on a default behavior.

Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it
by default if USB_GADGET and USB_DWC3 are enabled.
It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and
DWC3 for the host.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Jean-Jacques Hiblot
ba6c5f7a28 usb: dwc3: Add dwc3_of_parse() to get quirks information from DT
Add a new function that read quirk and configuration information from the
DT. The goal is to allow platforms using their own version of DWC3 driver
to migrate to the generic DWC3 driver.
The function is adapted from the function dwc3_get_properties() in the
linux dwc3 driver introduced in commit c5ac6116db35d.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Jean-Jacques Hiblot
1a63e5e5fb usb: dwc3-generic: if no max speed is specified in DT, assume super speed
There is no need to fail if the maximum speed is not specified.
If the speed is not specified, do the same as linux and assume super speed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Jean-Jacques Hiblot
b575e90916 usb: dwc3-generic: add a new host driver that uses the dwc3 core
Currently the host driver used by dwc3-generic is "xhci-dwc3". This is
a functional driver but it doesn't use the dwc3 core and, in particular,
it lacks some bits that may be important.
For example on the k2 platforms, it is important that the phy are properly
suspended when the USB is not used anymore. The dwc3 core also has a
partial support for quirks.
The new driver can be used as a drop-in replacement for "xhci-dwc3".

In terms of implementation, it may seem strange that 2 private structures
dwc3_generic_host_priv and dwc3_generic_priv) are used. The reason for this
is simply that the xhci layer expects a struct xhci_ctrl at the beginning
of the private data and it seemed wasteful to include it also for the
peripheral case.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Jean-Jacques Hiblot
1af590df16 usb: dwc3-generic: factorize code
Factor code for re-usability.
This is another step toward adding host support.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Jean-Jacques Hiblot
3a38a0adb9 usb: dwc3-generic: use platdata
Separate platform data from the private data.
This is one step toward adding host support.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Jean-Jacques Hiblot
33a99b4365 usb: dwc3: always use the inlined version of dwc3_host_init/dwc3_host_exit
No one is actually implementing those functions.
We could remove calls to these altogether, but it does not really hurt to
keep the empty inlined version at the moment and it satisfies a symmetry
with the gadget mode.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Jean-Jacques Hiblot
1708a12377 usb: xhci: move xhci.h to include usb
The xhci.h header file is currently located under drivers/usb/xhci
Move it to the include/usb folder to make it available to drivers that
are not under drivers/usb/xhci

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Jean-Jacques Hiblot
bbe3d4a6c1 usb: dwc3: switch to peripheral mode when exiting
This allow the phy to enter idle and then suspend.
the K2 platforms require the PHY to be suspended before the USB domain
clock can be turned off.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:16 +02:00
Jean-Jacques Hiblot
a8973731a4 usb: host: remove the xhci-zynqmp driver
This driver is not used anymore.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:16 +02:00
T Karthik Reddy
1a031d236a drivers: usb: dwc3: setup phy before dwc3 core soft reset
Phy setup should be done before dwc3 soft core reset as it is done
in linux & this fixes unreliable detection of usb cable on host side.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Tom Rini
6f4001315a Merge branch 'master' of git://git.denx.de/u-boot-usb
- Assorted bugfixes
2019-09-14 19:56:09 -04:00
Kever Yang
6578db8961 usb: ohci-generic: don't probe fail if there is no clk_enable() ops
Some clock driver do not have a clk_enable() call back, and we should not
treat this as fail in ehci probe like other modules, eg. clk_enabl_bulk()
do not return fail if ret value is '-ENOSYS'

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-09-11 16:16:12 +08:00
Kever Yang
54a0c7b2e7 usb: ehci-generic: don't probe fail if there is no clk_enable() ops
Some clock driver do not have a clk_enable() call back, and we should not
treat this as fail in ehci probe like other modules, eg. clk_enabl_bulk()
do not return fail if ret value is '-ENOSYS'

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-09-11 16:16:12 +08:00
Jean-Jacques Hiblot
e3e5825d01 usb: musb_hcd: fix compilation error
commit 65c1f9820c8f79f "usb: Add nonblock argument to submit_int_msg"
breaks the musb_hcd driver.
Fixing it by adding the missing argument

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-09-11 10:11:39 +02:00
Michal Suchanek
9dcab2c4d2 dwc2: use the nonblock argument in submit_int_msg
An USB 1.1 keyboard connected to dwc2 through a high-speed hub does not
report status until it changes. With this patch you can enable keyboard
by pressing a key while USB devices are probed. Without a keypress no
state is reported and the probe times out. We don't want to wait for a
keypress or timeout while polling for keypresses so implement an int_msg
nonblock variant that exits early on error.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Michal Suchanek
3437121c03 usb: Add nonblock argument to submit_int_msg
This will be used to implement non-blocking keyboard polling in case of
errors.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
2019-09-11 10:11:29 +02:00
Neil Armstrong
b35b807682 usb: xhci-dwc3: Add support for dis_u2_susphy_quirk
This quirk is necessary for the Amlogic GXL SoCs otherwise the
Port 2 PHY doesn't get out of suspend and U-Boot resets the board after:

XHCI timeout on event type 33... cannot recover.
BUG: failure at drivers/usb/host/xhci-ring.c:474/xhci_wait_for_event()!
BUG!

This quirk is also handled in the dwc3 core code, but until the
xhci-dwc3 driver uses the dwc3 core, the quirk must be handled here
to fix USB support on the Amlogic libretech-cc and libretech-ac board
when a device is only plugged in the OTG port.

Cc: Yuri Frolov <crashing.kernel@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Fixes: dc9cdf859e ("usb: dwc3: Add DWC3 controller driver support")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-10 10:00:53 +02:00
Marek Vasut
769a9cd4bb usb: r8a66597: Add optional DM VBUS regulator support
Add DM regulator support for toggling VBUS, this is useful on boards
which control the VBUS e.g. through GPIO.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Marek Vasut
8b54830154 usb: r8a66597: Checkpatch cleanup
Fix remaining checkpatch complaints in the driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Marek Vasut
a3d65651d9 usb: r8a66597: Add Kconfig entry
Add missing Kconfig entry for the R8A66597 driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Marek Vasut
7f3858f90d usb: r8a66597: Convert to USB DM
Convert the R8A66597 USB driver to DM and add support for DT probing.
Drop support for legacy non-DM and non-DT probing, since there are no
platform using that.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Marek Vasut
1eb381af9a usb: r8a66597: Replace R8A66597_BASE0
Replace R8A66597_BASE0 with proper SYSCFG0 accesses, no functional
change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Marek Vasut
81644e01c0 usb: r8a66597: Remove BE support
While the USB controller can work both in LE and BE modes, there is
no user for the BE mode, so drop it. If there ever is a user for it,
it can be easily re-added back.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Marek Vasut
4c9a135715 usb: r8a66597: Replace IO accessors
Replace in{bwl}()/out{bwl}() IO accessors with read{bwl}()/write{bwl}(),
to make the driver compile both on SH and ARM.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Marek Vasut
3ff134b7f1 usb: r8a66597: Make CONFIG_RZA_USB default
No other platforms use this r8a66597 controller but RZ/A1,
make RZ/A1 support the default and drop all the other SoC
support to remove ifdeffery.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Marek Vasut
0b80f21282 usb: r8a66597: Remove CONFIG_SUPERH_ON_CHIP_R8A66597
Remove CONFIG_SUPERH_ON_CHIP_R8A66597 macro, which is unused.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:36 +02:00
Simon Glass
e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00