Upper-bound for iterating for-loop over register set entries is incorrect.
Fix it byt calculating correct number of entries.
And fix also dumping the last entry DATA_DELAY, which is the last and not
first (zero).
Fixes: 1a8e6b63e2 ("tools: kwbimage: Dump kwbimage config file on '-p -1' option")
Signed-off-by: Pali Rohár <pali@kernel.org>
Show image type and version during parsing of kwbimage.
And show reasons in error messages when parsing failed.
This can help to debug issues with invalid images.
Signed-off-by: Pali Rohár <pali@kernel.org>
Marvell BootROM interprets execaddr of SPI/NOR XIP images as relative byte
offset from the from the beginning of the flash device. So if data image
offset and execute offset are not same then it is needed to adjust them
also in DDR RAM.
Fixes: f2c644e0b8 ("tools: kwboot: Patch destination address to DDR area for SPI image")
Signed-off-by: Pali Rohár <pali@kernel.org>
Some NOR images may be execute-in-place and do not contain DDR init code in
its kwbimage header. Such images cannot be booted over UART as BootROM
loads them to RAM. Add check that kwbimage contains DDR init code in its
header (either as binary code header or as the simple register-value set).
In some cases it is possible to load very small image into L2SRAM and when
DDR init code is not required. So check for L2SRAM load address and skip
DDR init code check in this case.
Signed-off-by: Pali Rohár <pali@kernel.org>
Before starting parsing of kwbimage, first validate that all optional v1
headers and correct. This prevents kwboot crashes on invalid input.
Signed-off-by: Pali Rohár <pali@kernel.org>
The 32-bit data checksum in UART image is not checked by the BootROM and
also Marvell tools do not generate it.
So if data checksum stored in UART image does not match calculated checksum
from the image then treat those checksum bytes as part of the executable
image code (and not as the checksum) and for compatibility with the rest of
the code manually insert data checksum into the in-memory image after the
executable code, without overwriting it.
This should allow to boot UART images generated by Marvell tools.
Signed-off-by: Pali Rohár <pali@kernel.org>
Add information of all available image types and where they should be
stored. Storage location offsets where documented from the disassembly of
the A385 BootROM image dump.
Signed-off-by: Pali Rohár <pali@kernel.org>
Add reference to Avanta Boot Flow documentation, BobCat2, AlleyCat3 and
PONCat3 BootROM Firmware documentation and links to public Marvell tools:
hdrparser.c and doimage.c
Signed-off-by: Pali Rohár <pali@kernel.org>
Despite the official specification, Marvell BootROM does not interpret
srcaddr from SATA image as number of sectors the beginning of the hard
drive, but as number of sectors relative to the main header.
To parse SATA kwbimage in the same way as Marvell BootROM, it is needed to
interpret srcaddr as relative offset to the main header. This change fixes
loading of SATA images via kwboot over UART.
Fixes: 792e423550 ("tools: kwboot: Patch source address in image header")
Signed-off-by: Pali Rohár <pali@kernel.org>
Despite the official specification, Marvell BootROM does not interpret
srcaddr from SATA image as number of sectors the beginning of the hard
drive, but as number of sectors relative to the main header.
The main header is stored at absolute sector number 1. So do not add or
subtract it when calculating with relative offsets to the main header.
Fixes: 501a54a29c ("tools: kwbimage: Fix generation of SATA, SDIO and PCIe images")
Fixes: 5c61710c98 ("tools: kwbimage: Properly set srcaddr in kwbimage v0")
Fixes: e0c243c398 ("tools: kwbimage: Validate data checksum of v1 images")
Fixes: aa6943ca31 ("kwbimage: Add support for extracting images via dumpimage tool")
Signed-off-by: Pali Rohár <pali@kernel.org>
Despite the official specification, Marvell BootROM does not interpret
srcaddr from SDIO image as offset in number of sectors (like for SATA
image), but as offset in bytes (like for all other images except SATA).
To parse SDIO kwbimage in the same way as Marvell BootROM, it is needed to
interpret srcaddr in bytes. This change fixes loading of SDIO images via
kwboot over UART.
Fixes: 792e423550 ("tools: kwboot: Patch source address in image header")
Signed-off-by: Pali Rohár <pali@kernel.org>
Despite the official specification, Marvell BootROM does not interpret
srcaddr from SDIO image as offset in number of sectors (like for SATA
image), but as offset in bytes (like for all other images except SATA).
To generate SDIO kwbimage compatible with Marvell BootROM, it is needed to
have srcaddr in bytes. This change fixes SDIO images for Armada 38x SoCs.
Fixes: 501a54a29c ("tools: kwbimage: Fix generation of SATA, SDIO and PCIe images")
Fixes: 5c61710c98 ("tools: kwbimage: Properly set srcaddr in kwbimage v0")
Fixes: e0c243c398 ("tools: kwbimage: Validate data checksum of v1 images")
Fixes: aa6943ca31 ("kwbimage: Add support for extracting images via dumpimage tool")
Signed-off-by: Pali Rohár <pali@kernel.org>
Add support for rk3588 package header in mkimage tool.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Using the mkimage entry with the multiple-data-files prop and having a
missing external blob result in an unexpected ValueError exception using
the --allow-missing flag.
ValueError: Filename 'missing.bin' not found in input path (...)
Fix this by using _pathname that is resolved by ObtainContents for blob
entries, ObtainContents also handles allow missing for external blobs.
Mark mkimage entry as missing and return without running mkimage when
missing entries is reported by CheckMissing.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The current init size limit of 76KiB is too big to fit in the 64KiB SRAM
on RK3568, sync init size limit from vendor u-boot to fix this.
Set init size limit to 60KiB (-16KiB) for RK3568.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Latest vendor TPL for RK3328 has grown past the current init size limit
of 28KiB, sync the init size limit from vendor u-boot to fix this.
Set init size limit to 30KiB (+2KiB) for RK3328.
This makes it possible to use latest vendor TPL on RK3328 without
getting a size limit error running the mkimage command.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The rockchip-tpl entry can be used when an external TPL binary should be
used instead of the normal U-Boot TPL.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
I had added this line locally, rebuild the image, but didn't ensure that
I had committed the correct version of the patch as well.
Fixes: 75b031ee4a ("Dockerfile: download binaries for Nokia RX-51")
Signed-off-by: Tom Rini <trini@konsulko.com>
Downloading files for a test may fail if the server is offline.
It is preferable to provide the files in our Docker image.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add the 'missing-msg' for more detailed output
on missing system firmware.
Signed-off-by: Rick Chen <rick@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
At present we show 'main section' as the top-level section name. It may
be more helpful to show the actual image name. This is tricky because
Image is a parent class of Entry_section, so there is no distinction
between an image and a section.
Update it to show the image name.
Signed-off-by: Simon Glass <sjg@chromium.org>
Build trace-cmd as part of the docker image, so that trace tests can be
used. Unfortunately the version provided by distributions is a little old
and has bugs. It also does not support specifying the time base for the
trace, which is required to convert microseconds to nanaseconds.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a second variant of the flame graph that shows records in terms of the
number of microseconds used by each call stack. This is a useful way of
seeing where time is going within the execution of U-Boot.
This requires a call stack that records the start time of each function,
as well as a way of subtracting all time consumed by child functions, so
that this time is not counted twice by the flamegraph. The time values in
the output are just for the function itself, not for its children.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to see how many times each function is called, particularly
in the context of its callers. A flamegraph is a way of showing this.
Support output in this format which can be used by the flamegraph.pl
script, to generate an SVG image for browsing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for writing ftrace records in the 'funcgraph' format, which
shows function entry and exit points as well as the time taken by each
function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the information in the trace header instead of reading it from the
trace records. Add debugging to check that System.map and the trace header
agree on this value.
Signed-off-by: Simon Glass <sjg@chromium.org>
The old text format is not much used anymore. Instead a new trace-cmd tool
has introduced a binary format for trace records.
Add support for generating this format. This involves removing the old
text format, adding various helpers for the new format and adjusting the
code to use an output file instead of stdout.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current use of 'profile' in some places is confusing. Update the code
to use the word 'trace' consistently. Change the flags to better match
their meaning and add some more comments.
Signed-off-by: Simon Glass <sjg@chromium.org>
The readme file for buildman is called buildman.rst.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This is very old and does not appear to be used. The CONFIG option
enabling it is no-longer present. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
This seems to have been used by ppc4xx which was removed a while back.
The Kconfig does not exist so it is never built. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is not a Kconfig option so we should not be setting it in the
Makefile. Rename it to use a CFS_ prefix, since this is still used in
mxsimage.c
In general tools should support all the features without reference to
CONFIG options, but this is left to the maintainer to look at.
Signed-off-by: Simon Glass <sjg@chromium.org>
Sometimes the Makefile rules or source code refers to Kconfig options
which don't exist. Update the moveconfig tool to check this and produce
a series of reports about inconsistencies.
This can then be used to generate patches to correct the problems.
Signed-off-by: Simon Glass <sjg@chromium.org>
If image file is stored on flash partition then it contains padding, which
is not part of the image itself. Image data size is stored in the image
header. So use image size from the header instead of expecting that total
image file size is size of the header plus size of the image data. This
allows dumpimage to parse image files with padding (e.g. dumped from flash
partition).
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Before reading image header, verify that image size is at least size of
the image header.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
gpimage type requires only that two first 32-bit words of data file are
non-zero. So basically every random data file can be guessed and verified
as gpimage. So completely skip gpimage type from image autodetection code
to prevent lot of false positive results. Data file with gpimage type can
be still verified and parsed by explicitly specifying -T gpimage.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The default splashfile name saved is ti.gz. User can use these
logo files and use it to test splash screen.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
The handle "fd" was created in imx8image.c:249 by calling the "fopen"
function and is lost in imx8image.c:282.
Should close the 'fd' file descriptor before exiting the
parse_cfg_file(image_t *param_stack, char *name) function.
Fixes: a2b96ece5b ("tools: add i.MX8/8X image support")
Signed-off-by: Mikhail Ilin <ilin.mikhail.ol@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The handle "fd" was created in imx8mimage.c:178 by calling
the "fopen" function and is lost in imx8mimage.c:210.
Should close the 'fd' file descriptor before exiting
the parse_cfg_file(char *name) function.
Fixes: 6609c2663c ("tools: add i.MX8M image support")
Signed-off-by: Mikhail Ilin <ilin.mikhail.ol@gmail.com>
The struct dcd_v1_t is initialized to MAX_HW_CFG_SIZE_V1 (60)
structs 'dcd_type_addr_data_t', so the indexes to use on its elements
are [0,59]. But on line 478, the variable 'length' can take on the value
60, which applies to array overflow: cd_v1->addr_data[length].type Thus,
it is necessary to tighten the check on the 'size' variable on line 463.
Fixes: 0b0c6af387 ("Prepare v2020.01")
Signed-off-by: Mikhail Ilin <ilin.mikhail.ol@gmail.com>
