Commit graph

13 commits

Author SHA1 Message Date
Simon Glass
55171aedda dm: Emit the arch_cpu_init_dm() even only before relocation
The original function was only called once, before relocation. The new
one is called again after relocation. This was not the intent of the
original call. Fix this by renaming and updating the calling logic.

With this, chromebook_link64 makes it through SPL.

Fixes: 7fe32b3442 ("event: Convert arch_cpu_init_dm() to use events")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-05-11 10:25:29 +08:00
Tom Rini
cfc4c0c2f3 imx9: Remove ARCH_MISC_INIT
We don't need an empty function, we can just not enable the hook we
don't use.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-03-02 15:32:25 -05:00
Ye Li
87650716ea imx: imx9: Support multiple env storages at runtime
Select env storages according to boot device at runtime

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Peng Fan
c383379f25 imx: imx9: Support booting m33 from Acore
Add bootaux command to support on-demand booting M33 from u-boot.
It kicks M33 via ATF by "bootaux 0x201e0000 0"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Peng Fan
a8753afed7 imx: imx9: Add M33 release prepare function
To support on-demand booting M33 image from A core. SPL needs
to follow M33 kick up sequence to release M33 firstly,
then set M33 CPUWAIT signal. ATF will clear CPUWAIT to kick
M33 to run.

The prepare function also works around the M33 TCM ECC issue by
clean the TCM. Also enable sentinel handshake and WDOG1 clock
for M33 stop and reset.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Peng Fan
0256577a83 imx: imx9: Add MIX power init
Add power init of MEDIAMIX, MLMIX and DDRMIX. And clear isolation
of MIPI DSI/CSI, USBPHY after the power up.

SPL should call the power init in its boot sequence before accessing
above three MIX and USB.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Peng Fan
989f73934d imx: imx9: Get the chip revision through S400 API
Update the get chip revision methond to use S400 API, also record
other information like lifecycle and UID to global data.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:01 +02:00
Ye Li
5fda95fb94 imx: imx9: Add TRDC driver for TRDC init
Add TRDC driver to iMX9. The TRDC init splits to two phases:
1. Early init phase will release TRDC from Sentinel and open write
   permission to the memory where SPL image runs. Sentinel will set
   the memory to RX only after ROM authentication for the OEM
   closed part.
2. Init phase will configure TRDC to allow non-secure master to
   access DDR. So the peripherals can work in u-boot.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Peng Fan
636c95f82b imx: imx9: support romapi
i.MX9 shares same ROM API with i.MX8ULP, so make the i.MX8ULP the function
prototype common and usable by i.MX9.

Also include mmc env functions that use ROM API.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Ye Li
2c5f5457bc imx: imx9: disable watchdog
Disable all 3 wdogs on AIPS2 and unmask SRC reset trigger for WDOG3-5

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Jian Li
53cf550d23 imx: imx9: Add function to initialize timer
Add timer_init to update ARM arch timer with correct frequency
from system counter and enable system counter.

Signed-off-by: Jian Li <jian.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Peng Fan
f79c162668 imx: imx9: Add CCM and clock API support
Add clock API to support CCM root clock and LPCG setting
Set the CCM AUTHEN register to allow non-secure world to set
root clock and lpcg.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00
Peng Fan
881df6ed84 imx: add basic i.MX9 support
Add i.MX9 Kconfig and basic files for the new SoC

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26 11:29:00 +02:00