Commit graph

74 commits

Author SHA1 Message Date
Simon Goldschmidt
6fb1eb1b76 arm: socfpga: gen5 enable designware_socfpga
Enable the socfpga specific designware ethernet driver by default for
socfpga by implying it when enabling CONFIG_ETH_DESIGNWARE for a
MACH_SOCFPGA config.

This is required to remove the hacky reset and phy mode handling in
arch/arm/mach-socfpga.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-02-18 13:00:53 +01:00
Simon Goldschmidt
4f1267cea1 net: designware: socfpga: adapt to Gen5
This driver was written for Arria10, but it applies to Gen5, too.

The main difference is that Gen5 has 2 MACs (Arria10 has 3) and the
syscon bits are encoded in the same register, thus an offset is needed.

This offset is already read from the devicetree, but for Arria10 it is
always 0, which is probably why it has been ignored. By using this
offset when writing the phy mode into the syscon regiter, we can use
this driver to set the phy mode for both of the MACs on Gen5.

Since the PHY mode bits in sysmgr are the same even for Stratix10,
let's drop the detection of the sub-mach by checking compatible
version and just use the same code for all FPGAs.

To work correctly, this driver depends on SYSCON and REGMAP, so select
those via Kconfig when it is enabeld.

Tested on socfpga_socrates (where the 2nd MAC is connected, so a shift
offset is required).

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-02-18 13:00:53 +01:00
Horatiu Vultur
4c66157f42 net: mscc: Move ocelot_switch to mscc_eswitch folder
Move file ocelot_switch to mscc_eswitch to prepare to add
new net drivers for other MSCC SoCs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01 14:13:36 +01:00
Gregory CLEMENT
c8546163fa net: add MSCC Ocelot switch support
This patch adds support for the Microsemi Ethernet switch present on
Ocelot SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23 18:26:44 +01:00
Weijie Gao
23f17164d9 ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs
This patch adds ethernet support for Mediatek ARM-based SoCs, including
a minimum setup of the integrated switch.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-By: "Frank Wunderlich" <frank-w@public-files.de>
2019-01-14 17:43:18 -05:00
Álvaro Fernández Rojas
9622972af4 net: add support for bcm6368-enet
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19 15:23:01 +01:00
Álvaro Fernández Rojas
55e55fe4a6 net: add support for bcm6348-enet
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19 15:23:00 +01:00
Grygorii Strashko
ffad5fa0cd driver: net: consolidate ti's code in separate folder
Add drivers/net/ti/ folder and move all TI's code in this folder for better
maintenance.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:41:59 -06:00
Cédric Le Goater
f95de0bd10 net: ftgmac100: convert to driver model
The driver is based on the previous one and the code is only adapted
to fit the driver model. The support for the Faraday ftgmac100
controller is the same with MAC and MDIO bus support for RGMII/RMII
modes.

Configuration is updated to enable compile again. At this stage, the
driver compiles but is not yet functional.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:56 -06:00
Stefan Roese
c895ef4650 net: Add MT7628 ethernet driver
This patch adds ethernet support for the MIPS based Mediatek MT76xx SoCs
(e.g. MT7628 and MT7688), including a minimum setup of the integrated
switch. This driver is loosly based on the driver version included in
this MediaTek github repository:

https://github.com/MediaTek-Labs/linkit-smart-uboot.git

Tested on the MT7688 LinkIt smart-gateway and on the
Gardena-smart-gateway.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Frank Wunderlich <frankwu@gmx.de>
Cc: Weijie Gao <hackpascal@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:56 -06:00
Anatolij Gustschin
58ec4d3342 net: fec_mxc: add support for i.MX8X
Add compatible property and enable the FEC ipg clock when probing
on i.MX8X. Add specific function for reading FEC clock rate via
clock driver when configuring MII speed register. Allow FEC_MXC
selection for i.MX8.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-24 14:45:38 -05:00
Michal Simek
ec48b6c991 arm64: versal: Add support for new Xilinx Versal ACAPs
Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
Engines with leading-edge memory and interfacing technologies to deliver
powerful heterogeneous acceleration for any application. The Versal AI
Core series has five devices, offering 128 to 400 AI Engines. The series
includes dual-core Arm Cortex™-A72 application processors, dual-core Arm
Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more
than 1,900 DSP engines optimized for high-precision floating point with
low latency.

The patch is adding necessary infrastructure in place without enabling
platform which is done in separate patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 16:53:21 +02:00
Adam Ford
d7869b2183 Convert CONFIG_MII et al to Kconfig
This converts the following to Kconfig:
   CONFIG_MII
   CONFIG_DRIVER_TI_EMAC

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-17 13:03:54 -04:00
Marek Vasut
215a06565a net: designware: socfpga: Add Arria10 extras
Add wrapper around the designware MAC driver to handle the SoCFPGA
specific configuration bits. On Arria10, this is configuration of
syscon phy_intf.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2018-08-13 22:35:42 +02:00
Chris Packham
fb73107698 net: mvgbe: convert to DM
Add driver model support to the mvgbe driver. As a temporary measure
both DM and non-DM uses are supported. Once all the users have been
converted the non-DM support can be dropped.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:21 -05:00
Joe Hershberger
c25f40627f net: Correct comment in Kconfig
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:08:18 -05:00
Kunihiko Hayashi
a8927795ef net: add Socionext AVE ethernet driver support
Add driver for Socionext AVE ethernet controller that includes MAC and
MDIO bus supporting RGMII/RMII modes.
The driver behaves the ethernet driver model (DM_ETH) with devicetree.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-06-13 13:54:17 -05:00
Chris Packham
f6e62ee04c net: MVGBE don't automatically select PHYLIB
When Kconfig support was added for MVGBE it included automatically
selected PHYLIB support. But MVGBE does not need PHYLIB it will build
fine without it. Commit ed52ea507f ("net: add Kconfig for MVGBE")
should have been a no-op in terms of build size but because of the
selecting PHYLIB the openrd configs increased in size.

Remove the automatic selection of PHYLIB, boards that need it will have
already enabled it in their config header file.

Fixes: commit ed52ea507f ("net: add Kconfig for MVGBE")
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17 17:38:31 +02:00
Chris Packham
ed52ea507f net: add Kconfig for MVGBE
Add Kconfig for MVGBE and update boards to select this.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2018-05-14 21:28:38 -04:00
Peng Fan
fbada4855d net: fec: sharing MDIO for two enet controllers
On i.MX6SX, 6UL and 7D, there are two enet controllers each has a
MDIO port. But Some boards share one MDIO port for the two enets. So
introduce a configuration CONFIG_FEC_MXC_MDIO_BASE to indicate
the MDIO port for sharing.
In Kconfig, user needs enable CONFIG_FEC_MXC_SHARE_MDIO first to enter
the CONFIG_FEC_MXC_MDIO_BASE.

To i.MX28, adapt to use the new config

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-13 15:47:38 -05:00
Alex Kiernan
f02b8d1761 Migrate CONFIG_DRIVER_TI_CPSW to Kconfig
This converts CONFIG_DRIVER_TI_CPSW to Kconfig

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-08 23:00:58 -04:00
Mario Six
171510522e treewide: Migrate CONFIG_TSEC_ENET to Kconfig
Migrate the CONFIG_TSEC_ENET option to Kconfig.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08 15:12:53 -04:00
Christophe Leroy
ee1e600c13 powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx
CONFIG_8xx doesn't mean much outside of arch/powerpc/
This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ...
It also renames 8xx_immap.h to immap_8xx.h to be consistent with
other file names.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06 16:30:37 -04:00
Calvin Johnson
a802d1e268 configs: ls1012a: add pfe configuration for LS1012A
Add configurations for PFE.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22 15:05:31 -05:00
Nobuhiro Iwamatsu
dcd18eaf61 net: sh-eth: Add to Kconfig and convert
This adds SH_ETHER to drivers/net/Kconfig and convert to Kconfig.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:26 -06:00
Wilson Lee
4bf56913d0 net: macb: Add support for Xilinx Zynq SoC
Although Xilinx Zynq SoC was using MACB similar hardware. However,
U-boot MACB driver was not supporting Xilinx Zynq SoC. This patch is
to add support for the Xilinx Zynq SoC to the existing MACB network
driver.

This patch is to add Zynq GEM DMA Config, provide callback
function for different linkspeed for case of using Xilinx Zynq
Programmable Logic as GMII to RGMII converter.

This patch convert the return value to use error codes.

Signed-off-by: Wilson Lee <wilson.lee@ni.com>
Cc: Chen Yee Chew <chen.yee.chew@ni.com>
Cc: Keng Soon Cheah <keng.soon.cheah@ni.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:14 -06:00
Tom Rini
6bf634223a Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-11 11:18:49 -05:00
Ahmed Mansour
541d57663f configs: Move SYS_DPAA_QBMAN to Kconfig
The CONFIG_SYS_DPAA_QBMAN define is used by DPAA1 freescale SOCs to
add device tree fixups that allow deep sleep in Linux. The define was
placed in header files included by a number of boards, but was not
explicitly documented in any of the Kconfigs. A description was added
to the drivers/networking menuconfig and default selection for
current SOCs that have this part

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:58 -08:00
Miquel Raynal
e7ab2ccd15 ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs
Until now, Armada 3700 SoCs could not enable the mvneta driver, and thus
did not benefit from Ethernet support. Add ARMADA_3700 in the
"depends on" list of the MVNETA Kconfig entry.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-09 16:41:00 +01:00
Stefan Mavrodiev
aba3924927 sunxi: Fix A20-OLinuXino-MICRO LAN8710 support
>From revision J the board uses new phy chip LAN8710. Compared
with RTL8201, RA17 pin is TXERR. It has pullup which causes phy
not to work. To fix this PA17 is muxed with GMAC function. This
makes the pin output-low.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-12-07 10:57:23 +05:30
Artturi Alm
6270a3f035 sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users
due misnaming of CONFIG_SUN4I_EMAC in include/configs/sunxi-common.h,
likely missed in:
	commit 3146f0c017 ("Move PHYLIB to Kconfig")

Signed-off-by: Artturi Alm <artturi.alm@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-09 14:39:30 +05:30
Adam Ford
8daec2d9d3 net: Add SMC911X driver to Kconfig, convert
We add the various SMC91XX symbols to drivers/net/Kconfig and then this
converts the following to Kconfig:
   CONFIG_SMC911X
   CONFIG_SMC911X_BASE
   CONFIG_SMC911X_16_BIT
   CONFIG_SMC911X_32_BIT

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Apply to the rest of the tree, re-squash old and new patch]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-20 21:40:26 -04:00
Chris Packham
7654f62f4e ARM: mvebu: Convert CONFIG_MVNETA to Kconfig
This converts the following to Kconfig:
   CONFIG_MVNETA

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-09-26 06:51:30 +02:00
Suji Velupillai
c89782dcac net: move Broadcom SF2 driver to Kconfig
move to Kconfig:
	CONFIG_BCM_SF2_ETH
	CONFIG_BCM_SF2_ETH_DEFAULT_PORT
	CONFIG_BCM_SF2_ETH_GMAC

Also modified defconfigs of all platforms that use these configs.

Signed-off-by: Suji Velupillai <suji.velupillai@broadcom.com>
Tested-by: Suji Velupillai <suji.velupillai@broadcom.com>
Reviewed-by: JD Zheng <jiandong.zheng@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:18:30 -05:00
Christophe Leroy
fad51ac3af powerpc, 8xx: move FEC Ethernet driver in drivers/net
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08 15:56:02 -04:00
Philipp Tomsich
449ea2cd0d net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable
This change migrate the following configuration options for Kconfig:
 * PHY_GIGE, indicates that a controller (with an appropriate PHY) is
   Gigabit capable and enables extra support in the miiutil for
   parsing the status of Gigabit PHYs
 * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs,
   which previously had to enabled through a board-specific config file

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-02 14:44:18 -05:00
Tom Rini
8dc1b17f14 Merge branch 'master' of git://git.denx.de/u-boot-nds32
Move FTMAC100 to where it should be, alphabetically in
drivers/net/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	drivers/net/Kconfig
2017-05-26 11:18:53 -04:00
rick
be71a179bd nds32: eth: Support ftmac100 DM.
Support Andestech eth ftmac100 device tree flow on AG101P/AE3XX platform.
Verification:
 Boot linux kernel via dhcp and bootm ok.

 NDS32 # setenv bootm_size 0x2000000;setenv fdt_high 0x1f00000;
 NDS32 # dhcp 0x600000 10.0.4.97:boomimage-310y-ae300-spi.bin
 BOOTP broadcast 1
 BOOTP broadcast 2
 BOOTP broadcast 3
 BOOTP broadcast 4
 DHCP client bound to address 10.0.4.178 (4899 ms)
	Using mac@e0100000 device
	TFTP from server 10.0.4.97; our IP address is 10.0.4.178
	Filename 'boomimage-310y-ae300-spi.bin'.
	Load address: 0x600000
	Loading: #################################################################
	         #################################################################
	         #################################################################
...
...
	         ###################################
	         233.4 KiB/s
					 done
					 Bytes transferred = 13872076 (d3abcc hex)
	NDS32 # dhcp 0x2000000 10.0.4.97:ae300.dtb
	BOOTP broadcast 1
	BOOTP broadcast 2
	BOOTP broadcast 3
	BOOTP broadcast 4
	DHCP client bound to address 10.0.4.178 (4592 ms)
	Using mac@e0100000 device
	TFTP from server 10.0.4.97; our IP address is 10.0.4.178
	Filename 'ae300.dtb'.
	Load address: 0x2000000
	Loading: #
	         82 KiB/s
					 done
					 Bytes transferred = 2378 (94a hex)
	NDS32 # bootm 0x600000 - 0x2000000
	 Image Name:
	 Created:      2017-03-22   6:52:03 UTC
	 Image Type:   NDS32 Linux Kernel Image (uncompressed)
	 Data Size:    13872012 Bytes = 13.2 MiB
	 Load Address: 0000c000
	 Entry Point:  0000c000
	 Verifying Checksum ... OK
	 Booting using the fdt blob at 0x2000000
	 Loading Kernel Image ... OK
	 Loading Device Tree to 01efc000, end 01eff949 ... OK
	 Linux version 3.10.102-20375-gb0034c1-dirty (rick@app09)
	(gcc version 4.9.3 (2016-07-06_nds32le-linux-glibc-v3_experimental) )
  #293 PREEMPT Wed Mar 22 14:49:28 CST 2017
	CPU: NDS32 N13, AndesCore ID(wb), CPU_VER 0x0d11103f(id 13, rev 17, cfg 4159)
...
...
Signed-off-by: rick <rick@andestech.com>
2017-05-23 13:48:27 +08:00
Marek Vasut
8ae51b6f32 net: ravb: Add Renesas Ethernet RAVB driver
Add driver for the Renesas Ethernet AVB block found in RCar H3/M3.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Based on work of:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
2017-05-22 04:38:24 +09:00
Mylène Josserand
751b0be0a1 sunxi: Convert CONFIG_RGMII to Kconfig
Convert CONFIG_RGMII to Kconfig. Thanks to that, it is possible to
update defconfig files of SYS_EXTRA_OPTIONS accordingly and
remove it when it is possible.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-20 13:20:29 +02:00
Mylène Josserand
abc3e4df59 sunxi: Convert SUNXI_EMAC to Kconfig
Convert the SUNXI_EMAC config to Kconfig. Remove it from SYS_EXTRA_OPTIONS
from many sunxi defconfig and renamed it into SUN4I_EMAC to not confuse it
with SUN8I_EMAC.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-20 13:19:59 +02:00
Mylène Josserand
4d43d065db sunxi: Move SUNXI_GMAC to Kconfig
Move the SUNXI_GMAC config option to Kconfig, remove it
from SYS_EXTRA_OPTIONS and rename it into SUN7I_GMAC.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-20 13:19:56 +02:00
Stefan Roese
e7935c4770 net: mvpp2: Enable compilation for Armada 7K/8K platforms
Since Armada 7K/8K is also equipped with a newer version of the MVPP2
ethernet controller, lets enable compilation of this driver for these
platforms.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-03-29 07:42:20 +02:00
Tom Rini
7131d2d06b drivers/net/Kconfig: Correct use of apostrophe
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-27 12:14:58 -05:00
Alex
af2cbfd6b9 drivers: net: Provide Kconfig menu for PHYLIB
Provide the necessary Kconfig symbols so that PHYLIB support may be
enabled in Kconfig, as opposed to needing to #define these symbols in
C source headers.

BITBANGMII and MV88E6352_SWITCH are left out of the PHYLIB submenu as
they don't seem to explicitly depend on it (i.e. they do not use the
phy_driver class).

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07 11:05:03 -06:00
Wenyou Yang
ebcb40a5a0 net: Kconfig: Add CONFIG_MACB option
Add CONFIG_MACB option in KConfig to be used to select the Cadence
MACB Ethernet driver.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-02-07 10:54:31 -06:00
Sjoerd Simons
0125bcf01c net: gmac_rockchip: Add Rockchip GMAC driver
Add a new driver for the GMAC ethernet interface present in Rockchip
RK3288 SOCs. This driver subclasses the generic design-ware driver to
add the glue needed specifically for Rockchip.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-11 20:23:50 -07:00
Patrick Bruenn
98d62e618b arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2016-12-16 12:57:12 +01:00
Stephen Warren
ba4dfef146 net: add driver for Synopsys Ethernet QoS device
This driver supports the Synopsys Designware Ethernet QoS (Quality of
Service) a/k/a eqos IP block, which is a different design than the HW
supported by the existing designware.c driver. The IP supports many
options for bus type, clocking/reset structure, and feature list. This
driver currently supports the specific configuration used in NVIDIA's
Tegra186 chip, but should be extensible to other combinations quite
easily, as explained in the source.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org> # V1
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-07 11:28:15 -06:00
Jagan Teki
97d29ca3a8 net: Kconfig: Add FEC_MXC entry
Added kconfig for FEC_MXC driver.

Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 16:53:16 +02:00