Commit graph

472 commits

Author SHA1 Message Date
Masahiro Yamada
e9986a4fa7 gpio: uniphier: import dt-binginds header from Linux
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:59 +09:00
Masahiro Yamada
ed3986ca30 bitops: collect BIT macros to include/linux/bitops.h
Same macros are defined in various places.  Collect them into
include/linux/bitops.h like Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:57 +09:00
Eugeniy Paltsev
3194c3cddf ARC: HSDK: introduce CREG GPIO driver
The HSDK can manage some pins via CREG registers block.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-11-24 19:37:56 +03:00
Patrice Chotard
3bc599c956 stm32: fix STMicroelectronics copyright
Uniformize STMicroelectronics copyrights headers for STM32
related code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06 09:51:01 -05:00
Masahiro Yamada
c5fb1c2524 gpio: uniphier: rework single device node model
First, I implemented this driver as per-bank model, but it was
a design mistake.

  - There are 31 banks in the maximum case.  It is painful to add
    so many nodes to DT.

  - The IRQ control registers are shared between banks.  Per-bank
    design is a problem for Linux.  The counterpart for Linux turned
    around to the single node model.

Rework based on the driver for Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15 22:32:24 +09:00
Tom Rini
2ee87b0c1a Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2017-10-10 20:14:38 -04:00
Simon Glass
ae06a1b996 dm: gpio: pca953x: Drop pointless data structure checks
These checks cannot fail since driver model will not call a driver's
method if it cannot fully create the driver data structures.

It is confusing to have these checks and others might copy them. Drop this
code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-10-08 20:41:09 -06:00
Simon Glass
7c84319af9 dm: gpio: Correct use of -ENODEV in drivers
In U-Boot -ENODEV means that there is no device. When there is a problem
with the device, drivers should return an error like -ENXIO or -EREMOTEIO.
When the device tree properties cannot be read correct , they should
return -EINVAL.

Update various GPIO drivers to follow this rule, to help with consistency
for future driver writers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Adam Ford <aford173@gmail.com>
2017-10-08 20:41:09 -06:00
Simon Glass
4d68604189 dm: gpio: Add a comment about not copying some drivers
These three drivers all use U_BOOT_DEVICE rather than device tree to
create devices, so have to do manual allocation of platform data. This is
not true for new platforms.

Add a more explicit comment so that people do not copy this approach with
new boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Adam Ford <aford173@gmail.com>
2017-10-08 20:41:08 -06:00
Simon Glass
1ba214767d dm: gpio: vybrid_gpio: Correct driver's use of bind() method
It does not look like this driver needs to use a bind() method. It does
not manually create devices with device_bind() nor does it create devices
using U_BOOT_DEVICE(). It seems to only use device tree.

Therefore the manual allocation of platform data is not needed and is
confusing. Also platform data should be set up by the ofdata_to_platdata()
method, not bind().

Update the driver in case others use it as a model in future.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Adam Ford <aford173@gmail.com>
2017-10-08 20:08:19 -06:00
Marek Vasut
f5f6959444 gpio: rmobile: Add Renesas RCar GPIO driver
Add GPIO driver for the Renesas RCar SoCs . The driver currently supports
only the RCar Gen3 R8A7795 and R8A7796 SoCs, but is easily extensible for
the other RCar SoCs as well.

This driver is meant to replace the pinmux part of SH_GPIO_PFC driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-28 06:54:06 +09:00
Philipp Tomsich
c23ce9ab85 rockchip: gpio: remove outdated/misleading comment
Remove a comment claiming that this driver only supports the RK3288,
as we also use it on the RK3368, RK3399 and (most likely) on other
variants.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Version-changes: 2
- use the dev_read_addr_ptr function in rk_gpio.c
2017-09-18 20:40:35 +02:00
Philipp Tomsich
a1d3480bc6 rockchip: gpio: convert to livetree
Update the Rockchip GPIO-bank driver to support a live tree.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Version-changes: 2
- use the dev_read_addr_ptr function in rk_gpio.c
2017-09-18 20:40:35 +02:00
Patrice Chotard
bc5d038445 stm32f1: remove stm32f1 support
A few years ago STM32F1 SoCs support has been added :
0144caf22c  gpio: stm32: add stm32f1 support
2d18ef2364  ARMv7M: add STM32F1 support

But neither STM32F1 dedicated defconfig nor board was
associated to these commits.

Got confirmation from Tom Rini and Matt Porter to remove
all this code [1]

[1] http://u-boot.10912.n7.nabble.com/Remove-STM32F1-support-td301603.html

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13 15:17:37 -04:00
Simon Glass
90d99e5936 Convert CONFIG_CMD_TCA642X to Kconfig
This converts the following to Kconfig:
   CONFIG_CMD_TCA642X

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11 15:42:00 -04:00
Simon Glass
1c27a4c949 gpio: Drop sx151x driver
This driver is not used in U-Boot. Drop it and its associated CONFIG
options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11 15:42:00 -04:00
Simon Glass
ba7cc6c6c5 Kconfig: Drop CONFIG_CMD_PCA953X_INFO
It does not seem worth having an option to enable another sub-command in
this legacy driver. Drop this option so that the sub-command is always
available.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11 15:41:50 -04:00
Simon Glass
0091362ce5 Convert CONFIG_CMD_PCA953X to Kconfig
This converts the following to Kconfig:
   CONFIG_CMD_PCA953X

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11 15:41:50 -04:00
Bin Meng
724368928c x86: Convert INTEL_ICH6_GPIO to Kconfig
This converts Intel ICH6 GPIO driver to Kconfig, and add it to the
imply list of platform drivers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Simon Glass
56f5c40ad9 dm: tegra: gpio: Convert to support livetree
Update the GPIO driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00
Stefano Babic
552a848e4f imx: reorganize IMX code as other SOCs
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/<SOC>.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic <sbabic@denx.de>

CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Akshay Bhat <akshaybhat@timesys.com>
CC: Ken Lin <Ken.Lin@advantech.com.tw>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Heiko Schocher <hs@denx.de>
CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
CC: Christian Gmeiner <christian.gmeiner@gmail.com>
CC: Stefan Roese <sr@denx.de>
CC: Patrick Bruenn <p.bruenn@beckhoff.com>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Nikita Kiryanov <nikita@compulab.co.il>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: "Eric Bénard" <eric@eukrea.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Ye Li <ye.li@nxp.com>
CC: Peng Fan <peng.fan@nxp.com>
CC: Adrian Alonso <adrian.alonso@nxp.com>
CC: Alison Wang <b18965@freescale.com>
CC: Tim Harvey <tharvey@gateworks.com>
CC: Martin Donnelly <martin.donnelly@ge.com>
CC: Marcin Niestroj <m.niestroj@grinn-global.com>
CC: Lukasz Majewski <lukma@denx.de>
CC: Adam Ford <aford173@gmail.com>
CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
CC: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Soeren Moch <smoch@web.de>
CC: Richard Hu <richard.hu@technexion.com>
CC: Wig Cheng <wig.cheng@technexion.com>
CC: Vanessa Maegima <vanessa.maegima@nxp.com>
CC: Max Krummenacher <max.krummenacher@toradex.com>
CC: Stefan Agner <stefan.agner@toradex.com>
CC: Markus Niebel <Markus.Niebel@tq-group.com>
CC: Breno Lima <breno.lima@nxp.com>
CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>
CC: Jaehoon Chung <jh80.chung@samsung.com>
CC: Scott Wood <oss@buserror.net>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Anatolij Gustschin <agust@denx.de>
CC: Simon Glass <sjg@chromium.org>
CC: "Andrew F. Davis" <afd@ti.com>
CC: "Łukasz Majewski" <l.majewski@samsung.com>
CC: Patrice Chotard <patrice.chotard@st.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Stephen Warren <swarren@nvidia.com>
CC: Andre Przywara <andre.przywara@arm.com>
CC: "Álvaro Fernández Rojas" <noltari@gmail.com>
CC: York Sun <york.sun@nxp.com>
CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>
CC: Chen-Yu Tsai <wens@csie.org>
CC: George McCollister <george.mccollister@gmail.com>
CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>
CC: Filip Brozovic <fbrozovic@gmail.com>
CC: Petr Kulhavy <brain@jikos.cz>
CC: Eric Nelson <eric@nelint.com>
CC: Bai Ping <ping.bai@nxp.com>
CC: Anson Huang <Anson.Huang@nxp.com>
CC: Sanchayan Maity <maitysanchayan@gmail.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Patrick Delaunay <patrick.delaunay@st.com>
CC: Gary Bisson <gary.bisson@boundarydevices.com>
CC: Alexander Graf <agraf@suse.de>
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-07-12 10:17:44 +02:00
Masahiro Yamada
fb07f97d6e gpio: add static to get_function()
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-06 13:09:36 -04:00
Axel Lin
d2d20d9925 dm: bcm6345_gpio: Set proper output level in bcm6345_gpio_direction_output
Current code does not set output level in bcm6345_gpio_direction_output,
fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
2017-06-12 08:38:41 -04:00
Simon Glass
2e5184dd5f gpio: samsung: Drop s3c2440_gpio driver
This is no longer used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:29 -04:00
Simon Glass
04048d58a8 dm: gpio: power: Convert pm8916 drivers to livetree
This PMIC driver (power and GPIO) is used by the sandbox SPMI tests.
Update the drivers to support a live device tree so that the tests pass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:17 -06:00
Simon Glass
150c5afe5b dm: gpio: Add live tree support
Add support for requesting GPIOs with a live device tree.

This involves adjusting the function signature for the legacy function
gpio_request_by_name_nodev(), so fix up all callers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes to stm32f746-disco.c:
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-01 07:03:10 -06:00
Simon Glass
95795ad6ce dm: gpio: sandbox: Use dev_read...() functions to access DT
Use the new dev_read...() functions to access the device tree, so that a
live tree can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:10 -06:00
Simon Glass
3a57123e59 dm: gpio: Refactor to prepare for live tree support
Move the main part of the GPIO request function into a separate function
so that it can be used by the live tree function when added. Update the
xlate method to use a node reference.

Update all GPIO drivers to handle the modified xlate() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:10 -06:00
Simon Glass
da409ccc4a dm: core: Replace of_offset with accessor (part 2)
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:04 -06:00
Simon Glass
4af0d7e870 dm: Fix up inclusion of common.h
It is good practice to include common.h as the first header. This ensures
that required features like the DECLARE_GLOBAL_DATA_PTR macro,
configuration options and common types are available.

Fix up some files which currently don't do this. This is necessary because
driver model will soon start using global data and configuration in the
dm/read.h header file, included via dm.h. The gd->fdt_blob value will be
used to access the device tree and CONFIG options will be used to
determine whether to support inline functions in the header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:03 -06:00
Simon Glass
79fc0c784d atmel: Fix up use of dm_scan_fdt_node()
This function should not be used outside the core driver-model code.
Update it to use dm_scan_fdt_dev() instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:03 -06:00
Simon Glass
a821c4af79 dm: Rename dev_addr..() functions
These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.

In the end we will have:

   1. dev_read_addr...()    - works on devices, supports flat/live tree
   2. devfdt_get_addr...()  - current functions, flat tree only
   3. of_get_address() etc. - new functions, live tree only

All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.

Note this involves changing some dead code - the imx_lpi2c.c file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:01 -06:00
Simon Glass
9d922450aa dm: Use dm.h header when driver mode is used
This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 06:57:52 -06:00
Kouei Abe
1815c29738 gpio: rcar_gen3: Fix GPIO read support
This patch fixes to read the GPIO status after confirming the
INOUT setting.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>
2017-05-22 04:37:30 +09:00
Peng Fan
aab203eb2e gpio: 74x164: make oe-pins optional
Make oe-pins optional because some boards have fixed it to enable.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-18 11:24:34 +02:00
Bin Meng
770ee01742 x86: ich6_gpio: Add use-lvl-write-cache for I/O access mode
Add a device-tree property use-lvl-write-cache that will cause
writes to lvl to be cached instead of read from lvl before each
write. This is required on some platforms that have the register
implemented as dual read/write (such as Baytrail).

Prior to this fix the blue USB port on the Minnowboard Max was
unusable since USB_HOST_EN0 was set high then immediately set
low when USB_HOST_EN1 was written.

This also resolves the 'gpio clear | set' command warning like:
  "Warning: value of pin is still 0"

Signed-off-by: George McCollister <george.mccollister@gmail.com>
<rebased on latest origin/master, fixed all baytrail boards>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-17 17:13:06 +08:00
Tom Rini
29cb2b3b90 gpio: Move OMAP_GPIO to Kconfig
This driver is used often enough such that we want to have this enabled
by default on any ARCH_OMAP2PLUS board, and this only compiles on
ARCH_OMAP2PLUS due to required defines, so mark that as the depends.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-15 10:40:00 -04:00
Tom Rini
758979101d gpio-uclass.c: Fix comparison of unsigned expression warning
We declare that gpio_base (which is the base for counting gpios, not an
address) is unsigned.  Therefore the comparison with >= 0 is always
true.  As the desire is to allow for this base number to be 0, we can
just drop this check.  Reported by clang-3.8.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-12 08:37:39 -04:00
Álvaro Fernández Rojas
e64bdb2fcf dm: gpio: add BCM6345 gpio driver
This driver is based on linux/arch/mips/bcm63xx/gpio.c, simplified to allow
defining one or two independent banks for each Broadcom SoC.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Vikas Manocha
774171020b dm: gpio: Add driver for stm32f7 gpio controller
This patch adds gpio driver supporting driver model for stm32f7 gpio.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Christophe KERELLO <christophe.kerello@st.com>
[trini: Add depends on STM32]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-08 11:57:02 -04:00
Chen-Yu Tsai
33559ffe5b gpio: sunxi: Add compatible string for R40 PIO
The PIO on the R40 SoC is mostly compatible with the A20.
Only a few pin functions for mmc2 were added to the PC
pingroup, to support 8 bit eMMCs.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-20 13:30:01 +02:00
Wenyou Yang
f2f3c1576a gpio: at91_gpio: add the clock support
Add the clock support.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2017-04-13 14:44:50 -06:00
Wenyou Yang
cf468880c3 gpio: at91_gpio: add the device tree support
Add the device tree support.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2017-04-13 14:44:50 -06:00
Wenyou Yang
5a07a5f922 gpio: Kconfig: add CONFIG_AT91_GPIO option
The CONFIG_AT91_GPIO option is used to select AT91 PIO GPIO driver.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2017-04-13 14:44:50 -06:00
Wenyou Yang
2dc63f7367 gpio: at91_gpio: remove CPU_HAS_PIO3 macro
The intention of the removal is the preparation to introduce the
new AT91 PIO pinctrl driver.

Use the union to make the PIO3 and PIO2's registers be together
and make their offset aligned.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-13 14:44:50 -06:00
Peng Fan
d665eb6114 gpio: Add Rapid GPIO2P driver for i.MX7ULP
Add the imx_rgpio2p driver for Rapid GPIO2P controllers on i.MX7ULP.
Have added all ports on RGPIO2P_0 and RGPIO2P_1.

The configurations CONFIG_IMX_RGPIO2P and CONFIG_DM_GPIO must be set
to y to enable the drivers.

To use the GPIO function, the IBE and OBE needs to set in IOMUXC.
We did not set the bits in driver, but leave them to IOMUXC settings
of the GPIO pins. User should use IMX_GPIO_NR to generate the GPIO number
for gpio APIs access.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by : Stefano Babic <sbabic@denx.de>
2017-03-17 09:27:08 +01:00
Tom Rini
21342d4aed Merge git://git.denx.de/u-boot-dm 2017-02-08 16:24:44 -05:00
Robert P. J. Day
7582ddce13 GPIO: Correct doc typo "confguration" -> "configuration"
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2017-02-08 16:24:29 -05:00
Simon Glass
e160f7d430 dm: core: Replace of_offset with accessor
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:12:14 -07:00
Ajay Bhargav
c7c47ca246 Update Maintainer and Author's email address
I am not longer using my old email address
"ajay.bhargav@einfochips.com". For U-Boot development email address is
now updated to contact@8051projects.net

Signed-off-by: Ajay Bhargav <contact@8051projects.net>
2016-12-27 11:24:17 -05:00
Michal Simek
f2e70a0073 gpio: zynq: Remove empty line
Trivial coding style fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-20 09:15:27 +01:00
Fabian Vogt
4faf5f93c6 gpio: bcm2835: add device tree support
This patch adds device tree support for the bcm2835 GPIO driver.

Signed-off-by: Fabian Vogt <fvogt@suse.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28 20:09:45 -05:00
Phil Edworthy
2d0c2c47aa gpio: dwapb: Add support for port B
The IP supports two ports, A and B, each providing up to 32 gpios.
The driver already creates a 2nd gpio bank by reading the 2nd node
from DT, so this is quite a simple change to support the 2nd bank.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21 14:07:26 -05:00
Wenyou Yang
d85d92ae7b gpio: atmel_pio4: Remove unnecessary clock calling
Due to the peripheral clock driver improvement, remove the
unnecessary clock calling.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-28 18:37:14 +02:00
Simon Glass
b02e4044ff libfdt: Bring in upstream stringlist functions
These have now landed upstream. The naming is different and in one case the
function signature has changed. Update the code to match.

This applies the following upstream commits by
Thierry Reding <treding@nvidia.com> :

   604e61e fdt: Add functions to retrieve strings
   8702bd1 fdt: Add a function to get the index of a string
   2218387 fdt: Add a function to count strings

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-13 13:54:10 -06:00
Simon Glass
26f50fbed2 Revert "x86: broadwell: gpio: Remove the codes to set up pin control"
This makes the assumption that setting up pinctrl in cpu_init_r() is safe.
On samus we need GPIOs before relocation in order to support power control.
This commit fixes the following message on boot:

   initcall sequence ffe5c6f4 failed at call ffe01d3d (err=-1)
   ### ERROR ### Please RESET the board ###

In any case it seems better to leave init to driver model, so that it can
pick up the GPIO driver when it needs it. Since pinctrl is a dependency of
the GPIO driver, we may as well put the dependency there and avoid these
problems.

This reverts commit 9769e05bcf.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11 11:55:33 +08:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Alexander Graf
601147b06a serial: bcm283x_mu: Detect disabled serial device
On the raspberry pi, you can disable the serial port to gain dynamic frequency
scaling which can get handy at times.

However, in such a configuration the serial controller gets its rx queue filled
up with zero bytes which then happily get transmitted on to whoever calls
getc() today.

This patch adds detection logic for that case by checking whether the RX pin is
mapped to GPIO15 and disables the mini uart if it is not mapped properly.

That way we can leave the driver enabled in the tree and can determine during
runtime whether serial is usable or not, having a single binary that allows for
uart and non-uart operation.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-06 13:18:19 -04:00
Alexander Graf
04a993fe11 bcm2835_gpio: Implement GPIOF_FUNC
So far we could only tell the gpio framework that a GPIO was mapped as input or
output, not as alternative function.

This patch adds support for determining whether a function is mapped as
alternative.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-09-06 13:18:18 -04:00
Wenyou Yang
ee3311db1c gpio: atmel_pio4: Rework to support DM & DT
Rework the driver to support driver model and device tree, and
support to regard the pio4 pinctrl device as a child of
atmel_pio4 device.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-15 22:58:03 +02:00
Wenyou Yang
46ed9381b7 gpio: atmel_pio4: Move PIO4 definitions to head file
In order to make these PIO4 definitions shared with AT91 PIO4
pinctrl driver, move them from the existing gpio driver to the
head file, and rephrase them.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-15 22:58:03 +02:00
Stephen Warren
6e06acb732 fdt: allow fdtdec_get_addr_size_*() to translate addresses
Some code may want to read reg values from DT, but from nodes that aren't
associated with DM devices, so using dev_get_addr_index() isn't
appropriate. In this case, fdtdec_get_addr_size_*() are the functions to
use. However, "translation" (via the chain of ranges properties in parent
nodes) may still be desirable. Add a function parameter to request that,
and implement it. Update all call sites to default to the original
behaviour.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Squashed in build fix from Stephen:
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-08-12 09:20:27 -06:00
Vignesh R
5746b0df9c gpio: Add driver for TI PCF8575 I2C GPIO expander
TI's PCF8575 is a 16-bit I2C GPIO expander.The device features a
16-bit quasi-bidirectional I/O ports. Each quasi-bidirectional I/O can
be used as an input or output without the use of a data-direction
control signal. The I/Os should be high before being used as inputs.
Read the device documentation for more details[1].

This driver is based on pcf857x driver available in Linux v4.7 kernel.
It supports basic reading and writing of gpio pins.

[1] http://www.ti.com/lit/ds/symlink/pcf8575.pdf

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-08-08 13:32:53 -04:00
Chen-Yu Tsai
4694dc56e9 sunxi: gpio: Add .xlate function for gpio phandle resolution
sunxi uses a 2 cell phandle for gpio bindings. Also there are no
seperate nodes for each pin bank.

Add a custom .xlate function to map gpio phandles to the correct
pin bank device. This fixes gpio_request_by_name usage.

Fixes: 7aa9748584 ("dm: sunxi: Modify the GPIO driver to support driver
		      model")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-31 21:45:12 +02:00
Masahiro Yamada
4e3d84066e ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()
This does not have much impact on behavior, but makes code look more
more like Linux.  The use of devm_ioremap() often helps to delete
.remove callbacks entirely.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:13:10 +09:00
Hamish Martin
4b689f02ff dm: gpio: MPC85XX GPIO platform data support
Define a platform data structure for the MPC85XX GPIO driver to allow
use of the driver without device tree. Users should define the GPIO
blocks for their platform like this:
  struct mpc85xx_gpio_plat gpio_blocks[] = {
         {
                 .addr = 0x130000,
                 .ngpios = 32,
         },
         {
                 .addr = 0x131000,
                 .ngpios = 32,
         },
  };

  U_BOOT_DEVICES(my_platform_gpios) = {
         { "gpio_mpc85xx", &gpio_blocks[0] },
         { "gpio_mpc85xx", &gpio_blocks[1] },
  };

This is intended to build upon the recent submission of the base
MPC85XX driver from Mario Six. We need to use that new driver
without dts support and this patch gives us that flexibility.
This has been tested on a Freescale T2080 CPU, although only the first
GPIO block.

Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
Tested-by: Mario Six <mario.six@gdsys.cc>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
mario.six@gdsys.cc
fc76b69873 gpio: pca953x: Fix register reading past 8th GPIO
A bug in the pca953x driver prevents correct reading of GPIO input
values beyond the 8th GPIO; all values are reported as zero. Setting of
GPIO output values is not affected.

This patch fixes the reading behavior.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Peng Fan <van.freenix@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19 17:05:55 -06:00
Tom Rini
fd9102dafe Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-06-13 08:50:58 -04:00
Marek Vasut
152ac5fabf gpio: at91: Fix pullup/pulldown configuration on PIO3
On systems with PIO3 (SAMA5D3/D4/..), the pullup and pulldown configuration
is mutualy exclusive. This patch assures that the opposite pull resistor gets
disabled before the requested pull resistor is enabled. This changes behavior
of at91_set_pio_pulldown() such that the pullup is only disabled if pulldown
is to be enabled. This changes behavior of at91_set_pio_pullup() such that
the pulldown is only disabled if pullup is to be enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12 23:49:38 +02:00
Bin Meng
9769e05bcf x86: broadwell: gpio: Remove the codes to set up pin control
Now that we have set up pin control in cpu_init_r(), remove the
duplicated codes in the broadwell gpio driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12 12:19:35 +08:00
Bin Meng
d8906c1f3f x86: Probe pinctrl driver in cpu_init_r()
At present pinctrl driver gets probed in ich6_gpio driver's probe
routine, which has two issues:

 - Pin's PADs only gets configured when GPIO driver is probed, which
   is not done by default. This leaves the board in a partially
   functional state as we must initialize PADs correctly to get
   perepherals fully working.
 - The probe routine of pinctrl driver is called multiple times, as
   normally there are multiple GPIO controllers. It should really
   be called just once.

Move the call to syscon_get_by_driver_data() from ich6_gpio driver
to cpu_init_r().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
2016-06-12 12:19:35 +08:00
Bin Meng
8142340ee3 x86: ich6_gpio: Output return value of syscon_get_by_driver_data()
The call to syscon_get_by_driver_data() does not save its return value.
Print it out to aid debugging.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12 12:19:35 +08:00
Tom Rini
cc749523ae Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2016-06-04 12:12:26 -04:00
mario.six@gdsys.cc
743268f514 dm: test: Add GPIO open drain tests
Add some tests for the new open drain setting feature of the GPIO
uclass, and extend the capabilities of the sandbox GPIO driver
accordingly.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:14:20 -07:00
mario.six@gdsys.cc
51781783c5 dm: gpio: Implement open drain for MPC85XX GPIO
This patch implements the open-drain setting feature for the MPC85XX
GPIO controller.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:14:12 -07:00
mario.six@gdsys.cc
53ecdfb920 dm: gpio: Add methods for open drain setting
Certain GPIO devices have the capability to switch their GPIOs into
open-drain mode, that is, instead of actively driving the output
(Push-pull output), the pin is connected to the collector (for a NPN
transistor) or the drain (for a MOSFET) of a transistor, respectively.
The pin then either forms an open circuit or a connection to ground,
depending on the state of the transistor.

This patch adds functions to the GPIO uclass to switch GPIOs to
open-drain mode on devices that support it.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:13:52 -07:00
mario.six@gdsys.cc
07d31f8f98 dm: gpio: Add driver for MPC85XX GPIO controller
This patch adds a driver for the built-in GPIO controller of the MPC85XX
SoC (probably supporting other PowerQUICC III SoCs as well).

Each GPIO bank is identified by its own entry in the device tree, i.e.

gpio-controller@fc00 {
      #gpio-cells = <2>;
      compatible = "fsl,pq3-gpio";
      reg = <0xfc00 0x100>
}

By default, each bank is assumed to have 32 GPIOs, but the ngpios
setting is honored, so the number of GPIOs for each bank in configurable
to match the actual GPIO count of the SoC (e.g. the 32/32/23 banks of
the P1022 SoC).

The usual functions of GPIO drivers (setting input/output mode and output
value setting) are supported.

The driver has been tested on MPC85XX, but it is likely that other
PowerQUICC III devices will work as well.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 22:13:24 -07:00
Tom Rini
f15715afea Merge branch 'master' of git://git.denx.de/u-boot-tegra 2016-06-03 16:30:47 -04:00
Marek Vasut
307c0b5189 gpio: mxs: Remove netdev.h
The MXS certainly does not support any sort of networking in GPIO code,
remove the netdev.h header.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-02 21:21:41 -04:00
Stephen Warren
074a1fdd27 gpio: add Tegra186 GPIO driver
Tegra186's GPIO controller register layout is significantly different from
previous chips, so add a new driver for it. In fact, there are two
different GPIO controllers in Tegra186 that share a similar register
layout, but very different port mapping. This driver covers both.

The DT binding is already present in the Linux kernel (in linux-next via
the Tegra tree so far).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org> # v1
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-05-31 09:54:24 -07:00
Stephen Warren
601800be22 ARM: tegra: convert CONFIG_TEGRA_GPIO to Kconfig
Future chips will contain different GPIO HW. This change will enable
future SoC support to select the appropriate GPIO driver for their HW,
in a future-looking fashion, using Kconfig.

TEGRA_GPIO is not simply selected by TEGRA_COMMON (even though all
current Tegra chips used this GPIO HW) to simplify the later addition
of support for Tegra SoCs that use different GPIO HW.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-05-31 09:53:57 -07:00
Tom Rini
e4a94ce4ac Merge git://git.denx.de/u-boot-dm
For odroid-c2 (arch-meson) for now disable designware eth as meson
now needs to do some harder GPIO work.

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	lib/efi_loader/efi_disk.c

Modified:
	configs/odroid-c2_defconfig
2016-05-27 20:34:12 -04:00
mario.six@gdsys.cc
71db3270db dm: gpio: pca953x: Support PCA953X with 40 GPIOs
A DM driver for PCA953x was recently introduced by Peng Fan, which lacked
support for the 40 GPIO versions.

This patch adds support for these chips.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Peng Fan  <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-27 09:56:20 -04:00
Stephen Warren
6f82fac2f2 sunxi: gpio: convert bind() to use driver data
Now that the DM core sets driver_data before calling bind(), this driver
can make use of driver_data to determine the set of child devices to
create, rather than manually re-implementing the matching logic in code.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2016-05-26 20:48:31 -06:00
Michal Simek
a6b9587bad gpio: zynq: Add support for reading gpio pin state
Add zynq_gpio_get_function() which return status on gpio pin.
This function enables gpio status command.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:00 +02:00
Eric Nelson
f835303388 gpio: exynos(s5p): remove gpio_xlate routine
With the addition of GPIO_ACTIVE_LOW parsing in gpio-uclass,
the Exynos/S5P gpio driver doesn't need a custom xlate routine.

Signed-off-by: Eric Nelson <eric@nelint.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2016-05-17 09:54:43 -06:00
Eric Nelson
6c3dd3caf0 gpio: rk: remove gpio_xlate routine
With the addition of GPIO_ACTIVE_LOW parsing in gpio-uclass,
the Rockchip gpio driver doesn't need a custom xlate routine.

Signed-off-by: Eric Nelson <eric@nelint.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Eric Nelson
5206e7bff5 gpio: pic32: remove gpio_xlate routine
With the addition of GPIO_ACTIVE_LOW parsing in gpio-uclass,
the pic32 gpio driver doesn't need a custom xlate routine.

Signed-off-by: Eric Nelson <eric@nelint.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-05-17 09:54:43 -06:00
Eric Nelson
86222f6140 gpio: omap: remove gpio_xlate routine
With the addition of GPIO_ACTIVE_LOW parsing in gpio-uclass,
the omap gpio driver doesn't need a custom xlate routine.

Signed-off-by: Eric Nelson <eric@nelint.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Eric Nelson
8376aaddaf gpio: intel_broadwell: remove gpio_xlate routine
With the addition of GPIO_ACTIVE_LOW parsing in gpio-uclass,
the intel_broadwell driver doesn't need a custom xlate routine.

Signed-off-by: Eric Nelson <eric@nelint.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Eric Nelson
6c880b7719 dm: gpio: add a default gpio xlate routine
Many drivers use a common form of offset + flags for device
tree nodes. e.g.:
	<&gpio1 2 GPIO_ACTIVE_LOW>

This patch adds a common implementation of this type of parsing
and calls it when a gpio driver doesn't supply its' own xlate
routine.

This will allow removal of the driver-specific versions in a
handful of drivers and simplify the addition of new drivers.

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Peng Fan
9300f711ba dm: gpio: introduce 74x164 driver
Introduce driver to support "fairchild,74hc595" devices.
1. Take linux drivers/drivers/gpio/gpio-74x164.c as reference.
2. Following the naming used in Linux driver with gen_7x164 as the prefix.
3. Enable CONFIG_DM_74X164 to use this driver.
4. Follow Documentation/devicetree/bindings/gpio/gpio-74x164.txt to add device
   nodes
5. Tested on i.MX6 UltraLite with 74LV595 using gpio command and oscillograph.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Peng Fan
037734393e dm: gpio: pca953x: introduce driver model support for pca953x
Introduce a new driver that supports driver model for pca953x.
The pca953x chips are used as I2C I/O expanders.
This driver is designed to support the following chips:
"
4 bits: pca9536, pca9537
8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
        pca9556, pca9557, pca9574, tca6408, xra1202
16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
         tca6416
24 bits: tca6424
40 bits: pca9505, pca9698
"
But for now this driver only supports max 24 bits and pca953x compatible
chips. pca957x compatible chips are not supported now.
These can be addressed when we need to add such support for the different
chips.
This driver has been tested on i.MX6 SoloX Sabreauto board with max7310
i2c expander using gpio command as following:

=>gpio status -a
Bank gpio@30_:
gpio@30_0: input: 1 [ ]

=> dm tree:
 i2c         [   ]    |   |   `-- i2c@021a8000
 gpio        [   ]    |   |       |-- gpio@30
 gpio        [   ]    |   |       `-- gpio@32

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: Andrea Scian <andrea.scian@dave.eu>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com> #on ZynqMP zcu102
2016-05-17 09:54:43 -06:00
Tom Rini
aa997d1d77 drivers/gpio/pm8916_gpio.c: Make pid be uint32_t
If get_dev_addr fails it will return FDT_ADDR_T_NONE and:
>>>     "priv->pid == 4294967295U" is always false regardless of the values of its operands. This occurs as the logical operand of if.

Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reported-by: Coverity (CID: 143913)
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-18 17:11:42 -04:00
Tom Rini
541c9be880 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-04-13 12:53:11 -04:00
Michal Simek
01b2a69907 GPIO: pca953x: Remove compilation warnings on arm64
Warnings:
w+../drivers/gpio/pca953x.c: In function ‘do_pca953x’:
w+../drivers/gpio/pca953x.c:220:5: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
w+../drivers/gpio/pca953x.c:233:10: warning: cast from pointer to
integer of different size [-Wpointer-to-int-cast]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Siva Durga Prasad Paladugu
251ab06d26 zynqmp: Kconfig: Enable ZYNQ_GPIO for ZynqMP
Enable ZYNQ_GPIO for ZynqMP using Kconfig. It enables the GPIO
driver support for ZynqMP.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Siva Durga Prasad Paladugu
404a00c7c9 gpio: zynqmp: Add GPIO driver support for ZynqMP
Add GPIO driver support for ZynqMP platform

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Siva Durga Prasad Paladugu
f17abcaedb gpio: zynq: Move the definitions to driver file
Move all the gpio definitions to driver file as
there is no use of them in other files.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Siva Durga Prasad Paladugu
de77a03bf2 gpio: zynq: Remove non driver model code
Remove non driver model support as it moved
to driver model. Dont need non driver model
anymore.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Siva Durga Prasad Paladugu
2978ae23fa gpio: Kconfig: Enable Zynq GPIO driver using kconfig
Enable DM GPIO and ZYNQ GPIO using kconfig instead of the board
config file.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Siva Durga Prasad Paladugu
68c7026e8d gpio: zynq: Convert Zynq GPIO to driver model
Convert Zynq GPIO driver to driver model

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Stefan Roese
b23005cec3 gpio: mvebu_gpio: Add missing out value set to gpio_direction_output()
This patch adds the missing configuration of the output value to the
gpio_direction_output() function. Without this, calling
gpio_direction_output() does not set the out-value at all and only
configures the gpio as output.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
Reviewed-by: Kevin Smith <kevin.smith@elecsyscorp.com>
2016-04-12 11:13:33 +02:00
Mateusz Kulikowski
120800df72 gpio: Add support for Qualcomm PM8916 gpios
This driver supports GPIOs present on PM8916 PMIC.
There are 2 device drivers inside:
- GPIO driver (4 "generic" GPIOs)
- Keypad driver that presents itself as GPIO with 2 inputs (power and reset)

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:13 -04:00
Mateusz Kulikowski
81a87e1894 gpio: Add support for Qualcomm gpio controller
Add support for gpio controllers on Qualcomm Snapdragon devices.
This devices are usually called Top Level Mode Multiplexing in
Qualcomm documentation.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:07 -04:00
Tom Rini
40345e9ea7 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-04-01 08:17:55 -04:00
Masahiro Yamada
bc82a1310f gpio: uniphier: use devm_get_addr() to get base address
Currently, fdtdec_get_addr_size() does not support the address
translation, so it cannot handle device trees with non-straight
"ranges" properties.  (This would be a problem with DTS for UniPhier
ARMv8 SoCs.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:17:19 +09:00
Chen-Yu Tsai
81a8aa3a39 sunxi: axp: Generalize register macros for VBUS drive GPIO
VBUS drive is supported on AXP221 and later PMICs. Rework the macros
so we can support this on later PMICs without too much work.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31 17:03:52 +02:00
Tom Rini
a6164205ee Merge git://www.denx.de/git/u-boot-marvell 2016-03-25 12:57:18 -04:00
Stefan Roese
704d9a645e gpio: Add DM GPIO driver for Marvell MVEBU
This patch adds a DM GPIO driver for the Marvell MVEBU SoCs. There are
other non-DM drivers that might be used on these platforms. But this
patch creates a new DM driver. Which will be used by all Armada XP/38x
boards. Other MVEBU SoC (Kirkwood / Orion) may follow once they
support DM as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-03-24 09:44:39 +01:00
Hans de Goede
b813ef0252 sunxi: Add a bunch of missing compatible strings to sunxi_gpio.c
The kernel has different compatible strings for the pio block
because the pin-muxing is different on all the different SoCs,
but sunxi_gpio.c only support the basic gpio functionality, which
is identical everywhere. Add the missing compatible strings for
various SoC models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Simon Glass
64b179770f x86: broadwell: Add a GPIO driver
Add a GPIO driver for the GPIO peripheral found on broadwell devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:26 +08:00
Simon Glass
779653b0cb x86: Drop all the old pin configuration code
We don't need this anymore - we can use device tree and the new pinconfig
driver instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Simon Glass
15cf75ec15 x86: gpio: Allow the pinctrl driver to set up the pin config
Rather than setting up the pin configuration in the GPIO driver, use the
new pinctrl driver to do it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Simon Glass
d6d50db8a3 x86: gpio: Correct GPIO setup ordering
The Intel GPIO driver can set up the GPIO pin mapping when the first GPIO
is probed. However, it assumes that the first GPIO to be probed is in the
first GPIO bank. If this is not the case then the init will write to the
wrong registers.

Fix this. Also add a note that this code is deprecated. We should move to
using device tree instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:23 +08:00
Simon Glass
17c43f1a42 gpio: Use const where possible
Some functions do not change the struct gpio_desc parameter. Update these to
use const so this is clear.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:22 +08:00
Simon Glass
bbf2478026 gpio: Add a function to obtain a GPIO vector value
We can use GPIOs as binary digits for reading 'strapping' values. Each GPIO
is assigned a single bit and can be set high or low on the circuit board. We
already have a legacy function for reading these values. Add one that
supports driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:22 +08:00
Simon Glass
3f603cbbb8 dm: Use uclass_first_device_err() where it is useful
Use this new function in places where it simplifies the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 15:34:50 -06:00
Masahiro Yamada
b9a66b63b4 gpio: uniphier: add driver for UniPhier GPIO controller
This GPIO controller device is used on UniPhier SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-29 03:50:15 +09:00
Vikas Manocha
e66c49fa93 stm32: add support for stm32f7 & stm32f746 discovery board
This patch adds support for stm32f7 family & stm32f746 board.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:43:57 -05:00
Vikas Manocha
09959ba3c5 gpio: stm32_gpio: move base addresses to the soc file
Base addresses for GPIOs could be different for different socs, this
patch moves the base addresses from driver to the soc specific location.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:42:50 -05:00
Vikas Manocha
14cec06113 gpio: stm32_gpio: move clock config from driver to board
This patch removes the gpio clock enable from gpio driver & move it in the
board code, making it possible to use the gpio driver with other socs.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:42:49 -05:00
Simon Glass
651827c0fc tegra: gpio: Show the GPIO value for outputs
The tegra GPIO controller has two ways of reading the value of a GPIO. It
can supply the 'input' value (which is the value read from the pin) and the
'output' value (which is the value being driven from the pin. With a GPIO
set to output mode, the 'input' value is always low which is not very
useful.

This has the unfortunate result that setting a GPIO high still leaves it
showing as low in the 'gpio status' command.

Adjust the driver to check which direction the GPIO is set to, then read
the value from the appropriate register: 'input' for input GPIOs, 'output'
for output GPIOs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16 09:17:50 -07:00
Tom Rini
57dc53a724 Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging 2016-02-08 09:48:04 -05:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Bin Meng
3ddc1c7bd3 x86: ich6_gpio: Convert to use proper DM API
At present this GPIO driver still uses the legacy PCI API. Now that
we have proper PCH drivers we can use those to obtain the information
we need. While the device tree has nodes for the GPIO peripheral it is
not in the right place. It should be on the PCI bus as a sub-peripheral
of the PCH device.

Update the device tree files to show the GPIO controller within the PCH,
so that PCI access works as expected. This also adds '#address-cells'
and '#size-cells' to the PCH node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05 12:47:21 +08:00
Bhuvanchandra DV
9e30ba2d75 dm: vybrid_gpio: Drop legacy code
All boards using this driver are with device tree support,
hence drop the legacy code in driver to have a pure DT solution.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-02 21:36:10 +01:00
Purna Chandra Mandal
386d934e0b drivers: gpio: add driver for Microchip PIC32 GPIO controller.
In PIC32 GPIO controller is part of PIC32 pin controller.
PIC32 has ten independently programmable ports and each with multiple pins.
Each of these pins can be configured and used as GPIO, provided they
are not in use for other peripherals.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-02-01 22:14:00 +01:00
Masahiro Yamada
84b8bf6d5d bug.h: move BUILD_BUG_* defines to include/linux/bug.h
BUILD_BUG_* macros have been defined in several headers.  It would
be nice to collect them in include/linux/bug.h like Linux.

This commit is cherry-picking useful macros from include/linux/bug.h
of Linux 4.4.

I did not import BUILD_BUG_ON_MSG() because it would not work if it
is used with include/common.h in U-Boot.  I'd like to postpone it
until the root cause (the "error()" macro in include/common.h causes
the name conflict with "__attribute__((error()))") is fixed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-25 10:39:59 -05:00
Simon Glass
486478282e rockchip: gpio: Implement the get_function() method
Provide this method so that 'gpio status' works fully. It now shows
whether a pin is used for input, output or some other function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:35 -07:00
Simon Glass
7d0c2c3feb rockchip: gpio: Read the GPIO value correctly
This function should return 0 or 1, not a mask. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:35 -07:00
Simon Glass
4dc5259ac7 dm: gpio: Allow the uclass to work without printf()
For SPL we don't really need sprintf() and with tiny-printf this is not
available. Allow this to be dropped in SPL when using tiny-printf.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:22 -07:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
Måns Rullgård
88f91d1375 gpio: mxs: add name_to_gpio() function
Override the default name_to_gpio() function with one that
accepts strings of the form bank:pin.  If a colon is present
in the provided name, it behaves like the default version.

This lets the "gpio" command work with sane names rather than
requiring the user to enter the bank/pin composite in decimal.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2016-01-07 17:54:16 +01:00
Kamil Lulko
5be9356926 Change e-mail address of Kamil Lulko
Signed-off-by: Kamil Lulko <kamil.lulko@gmail.com>
2015-12-05 18:22:32 -05:00
Wenyou Yang
2c62c56a86 gpio: atmel: Add the PIO4 driver support
The PIO4 is introduced from SAMA5D2, as a new version
for Atmel PIO controller.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2015-11-30 22:27:52 +01:00
Thomas Chou
079bfc5db4 altera_pio: change ioremap to map_physmem
Change ioremap() to map_physmem(), as it is more used in u-boot.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-18 21:18:30 +08:00
Dirk Eibach
daa75b3482 i2c: Fix pca953x endianess issue
By reading 2 consecutive bytes from i2c to an u16 value
we have an endianess issue.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-11-12 18:04:12 -05:00
Thomas Chou
88d5ecf4b9 nios2 : convert altera_pio to driver model
Convert altera_pio to driver model.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23 07:37:03 +08:00
Mugunthan V N
1ed0f85faf drivers: gpio: omap: add support for parsing additional gpio parameters
With DM_GPIO, gpio parameters like ACTIVE_(LOW/HIGH) are to be
parsed in xlate gpio drivers-ops. Since xlate is not implemented
in omap_gpio driver, the driver considers all gpio to be
ACTIVE_HIGH which is the default case and fails to return actual
gpio status for ACTIVE_LOW gpios. So adding .xlate ops to
omap_gpio.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:44:02 -04:00
Hans de Goede
6944aff1ca sunxi: power: Unify axp pmic function names
Stop prefixing the axp functions for setting voltages, etc. with the
model number, there ever is only one pmic driver built into u-boot,
this allows simplifying the callers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20 18:40:27 +02:00
Przemyslaw Marczak
6f183e869e gpio: s5p: call: dev_get_addr() instead of fdtdec_get_addr()
After rework in lib/fdtdec.c, the function fdtdec_get_addr()
doesn't work for nodes with #size-cells property set to 0.

To get GPIO's 'reg' property, the code should use one of:
fdtdec_get_addr_size_auto_no/parent() function.

Fortunately dm core provides a function to get the property.

This commit reworks function gpio_exynos_bind(), to properly
use dev_get_addr() for GPIO device.

This prevents setting a wrong base register for Exynos GPIOs.

Tested on: Odroid U3/X2, Trats, Trats2, Odroid XU3, Snow (by Simon).

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-10-03 14:39:19 +01:00
Stephen Warren
fe82857c4b gpio: tegra: use named constants
In order to make it clear what the parameters to set_config() and
set_direction() mean, and similarly for the return values from the
respective get_*(), define named constants for these values.

Disassembly shows no diff in the generated code, except that the
order of the code in the branches of tegra_gpio_get_function() gets
modified without affecting behaviour.

Suggested-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-10-02 11:05:56 -07:00
Stephen Warren
9f75a222c7 gpio: tegra: remove unused type
These enum values aren't used anywhere. Remove them.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-10-02 11:05:44 -07:00
Stephen Warren
0c35e3a8b4 ARM: tegra: don't enable GPIOs until direction is set
Tegra's GPIO driver currently enables pins as GPIO as soon as they're
requested. This is not safe, since the desired direction and output value
are not yet known. This could cause a glitch on the output pins between
gpio_request() and gpio_direction_*(), depending on what values happen to
be in the GPIO controller's in/out and out-value registers vs. the final
desired configuration.

To solve this, defer enabling pins as GPIOs until some gpio_direction_*()
is invoked, and the desired configuration is explicitly programmed.

In theory this change could cause regressions, if code exists that claims
a GPIO, never explicitly sets a direction, and then gets/sets the GPIO
value based on that assumption. However, I've read through all the Tegra-
related board files and device drivers that touch GPIOs and I do not see
such buggy code anywhere.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-10-02 11:05:01 -07:00
Stephen Warren
f9d3cab091 ARM: tegra: fix GPIO init table programming
Tegra's gpio_config_table() currently uses common GPIO APIs. These used
to work without requesting the GPIO, but since commit 2fccd2d96b "tegra:
Convert tegra GPIO driver to use driver model" no longer do so. This
prevents any of the GPIO initialization table from being applied to HW.
Fix gpio_config_table() to directly program the HW to solve this.

Fixes: 2fccd2d96b ("tegra: Convert tegra GPIO driver to use driver model")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-10-02 11:04:34 -07:00
Tom Rini
850f788709 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh 2015-09-13 17:25:16 -04:00
Sylvain Lemieux
89983478bd gpio: lpc32xx: fix issues with port3 gpio
The current simplify lpc32xx gpio driver implementation assume a
maximum of 32 GPIO per port; there are a total of 22 GPI, 24 GPO
and 6 GPIO to managed on port 3.

Update the driver to fix the following:
1) When requesting GPI_xx and GPO_xx on port 3 (xx is the same number)
   the second call to "gpio_request" will return -EBUSY.

2) The status of GPO_xx pin report the status of the
   corresponding GPI_xx pin when using the "gpio status" command.

3) The gpio driver may setup the direction register for the wrong
   gpio when calling "gpio_direction_input" (GPI_xx) or
   "gpio_direction_output" (GPO_xx) on port 3; the call to the
   direction is require to use the "gpio status" command.

The following change were done in the driver:
1) port3 GPI are cache in a separate 32 bits in the array.
2) port3 direction register written only for GPIO pins.
3) port3 GPO & GPIO (as output) are read using "p3_outp_state".
4) LPC32XX_GPI_P3_GRP updated to match the change.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
2015-09-11 17:15:34 -04:00
Tom Rini
c9feb427ab Merge git://git.denx.de/u-boot-rockchip 2015-09-03 14:57:09 -04:00
Simon Glass
1f8f7730a8 rockchip: gpio: Add rockchip GPIO driver
This supports RK3288 at present. It does not implement functions or support
for pull up/down.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00