Commit graph

38 commits

Author SHA1 Message Date
Sean Anderson
237e5880f8 spi: dw: Add SoC-specific compatible strings
This adds SoC-specific compatible strings to all users of the designware
spi device. This will allow for the correct driver to be selected for each
device. Where it is publicly documented, a compatible string for the
specific device version has also been added. Devices without
publicly-documented device versions include MSCC SoCs, and Arc Socs. All
compatible strings except those for SoCFPGAs and some of the versioned
strings have been taken from Linux.

Since SSI_MAX_XFER_SIZE is determined at runtime, this is not strictly
necessary. However, it is a good cleanup and brings things closer to Linux.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Sean Anderson
13fc44e222 spi: dw: Rename "cs-gpio" to "cs-gpios"
This property is named differently than other SPI drivers with the same
property, as well as the property as used in Linux.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:36 +05:30
Eugeniy Paltsev
bed6481940 ARC: HSDK: add reset for EHCI
Add reset phandle to EHCI device tree node to make on-chip reset
controller usable with EHCI.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13 18:18:09 +03:00
Eugeniy Paltsev
d82ed6788e ARC: DTS: cleanup USB node names
Remove redundant '0x' from node names.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13 18:15:12 +03:00
Eugeniy Paltsev
d4ee5c39ba ARC: HSDK-4xD: print timer clock value
Print timer clock value in hsdk_clock print_all command.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27 11:20:26 +03:00
Eugeniy Paltsev
28db0d693f ARC: HSDK: split HSDK and HSDK-4xD DTS
Split HSDK and HSDK-4xD device tree files so they can have
different model names.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27 11:20:26 +03:00
Eugeniy Paltsev
a6a0b0244b ARC: HSDK: Enable on-chip reset controller
As the driver of on-chip reset controller became available
we are ready to enable it.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16 23:36:36 +03:00
Alexey Brodkin
95f7103f94 ARC: nsim_hs38: Add support of Virtio NET & BLK
Given now nsim_hs38 configuration is usable on QEMU and in QEMU
we have Virtio working perfectly fine the next logical step
is to add support of supported & known to work net & bkl to this
config.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-12 20:40:24 +03:00
Alexey Brodkin
9515e41d38 ARC: nSIM: switch from ARC UART to DW UART
Since v2019.06 DesingWare nSIM supports DesignWare UART simulation
and so we may switch from pretty unusual ARC UART to much more standard
DesignWare UART (which in case of U-Boot is just an ordinary 16650 UART).

This among other things makes built dinaries compatible with our other
platforms to name a few: FPGA-based HAPS boards, QEMU and even ZeBU.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-12 20:40:24 +03:00
Alexey Brodkin
0da32633ab arc: emsdp/iotdk: Switch to DM_MMC
Somehow EMSDP & IoT DK boards were skipped on ARC boads conversion
to DM MMC. So doing it now.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-11-01 16:45:40 +03:00
Eugeniy Paltsev
2a7232371a NET: DW: fix regression for ARC boards
The commit
642b80d256 ("net: designware: drop compatible altr, socfpga-stmmac")
breaks designware ethernet for all ARC boards. It removes
"altr, socfpga-stmmac" compatible from "drivers/net/designware.c"
without changing compatible in the boards which use it.

Fix that by adding "snps,arc-dwmac-3.70a" compatible string to
"drivers/net/designware.c" and using it in ARC boards device tree.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2019-10-07 13:23:49 -04:00
Eugeniy Paltsev
cc2f7b6c7d ARC: [plat-axs10x]: migrate to DM_MMC
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18 09:12:38 +03:00
Eugeniy Paltsev
54858311df ARC: [plat-hsdk]: migrate to DM_MMC
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18 09:12:38 +03:00
Neil Armstrong
ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30
Alexey Brodkin
adc9b09a23 emdk->emsdp: Rename board
Real marketing name of the board was recently updated so
to accommodate that change renaming the board and all
related to it.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-11-01 23:04:05 +03:00
Alexey Brodkin
5396e8b1dd arc: Add support for IoT development kit
The DesignWare ARC IoT Development Kit is a versatile platform
that includes the necessary hardware and software to accelerate
software development and debugging of sensor fusion,
voice recognition and face detection designs.

More information is avaialble here [1] and here [2].

The board is based on real silicon with
ARC EM9D-based Data Fusion IP Subsystem.

It sports a rich set of I/O including
 * DW USB OTG
 * DW MobileStorage (used for micro SD-card)
 * GPIO
 * multiple serial interface including DW APB UART
 * ADC, PWM and eFlash, SRAM and SPI Flash memory
 * Real-Time Clock (RTC)
 * Bluetooth module with worldwide regulatory compliance
   (FCC, IC, CE, ETSI, TELEC)
 * On-board 9-axis sensor (gyro, accelerometer and compass)

Extensible with Arduino, Pmod, mikroBUS connectors and a 2x18
extension header.

One of the most interesting features for developers is built-in
Digilent USB JTAG probe so only micro-USB cable is needed!

[1] https://www.synopsys.com/dw/ipdir.php?ds=arc_iot_development_kit
[2] https://www.synopsys.com/dw/doc.php/ds/cc/iot_dev_kit.pdf

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05 16:57:00 +03:00
Alexey Brodkin
c3dcd508b6 ARC: Add model property to boards .dts
1. This way we sync with Linux kernel where we have model
   set for all ARC boards for quite some time, see [1]

2. Once we enable DISPLAY_BOARDINFO for ARC this info will
   be printed on boot givin some extra data-point about the board

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=618a9cd06dd471ac232f5b27325b24d26eba5571

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-10-05 16:55:42 +03:00
Eugeniy Paltsev
13e57722fe ARC: HSDK: Fix timer frequency value
CPU (and hence cpu timers) on HSDK board runs at 500MHz after
preloader so fix wrong CPU frequency value in hsdk.dts

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
2018-09-05 18:11:45 +03:00
Eugeniy Paltsev
cdfe6913c1 AXS10x: add spi flash support
AXS10x boards have n25q512 spi flash IC, so add corresponding
nodes to device tree and enaple corresponding options in
defconfig.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31 07:49:47 +03:00
Eugeniy Paltsev
fe3eb7a887 GPIO: CREG: improve flexibility of hsdk-creg-gpio driver
CREG GPIO is a driver for weird soc-specific output ports, which are
controlled by some fields in memory mapped register.

Example:

31                 9        7        5           0   < bit number
|                  |        |        |           |
[     not used     | gpio-1 | gpio-0 | <-shift-> ]   < 32 bit register
                       ^        ^
                       |        |
                write 0x2 == set output to "1" (activate)
                write 0x3 == set output to "0" (deactivate)

As of tooday we only support fixed (hardcoded) bit per gpio line,
activate / deactivatei and shift values. Fix that by read them from
device tree to be able to use this driver for other boards.

Remove "hsdk" prefix from compatible string as this driver can be
used with different boards like HSDK, AXS101, AXS103, etc.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31 07:49:47 +03:00
Masahiro Yamada
28b538b69d .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
Follow Linux commit 10b62a2f785a (".gitignore: move *.dtb and *.dtb.S
patterns to the top-level .gitignore").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-18 14:43:12 -04:00
Alexey Brodkin
2c3f9261c8 ARC: Add support for EM Development Kit board
Synopsys DesignWare ARC EM Development Kit (ARC EMDK) is
an FPGA-based development platform from Synopsys aimed to speed-up
development of software for ARC EM cores and entire subsystems based on
ARC EM like Data Fusion, Secure and Sensor & Control subsystems.

U-Boot is supposed to be used as a primary bootloader on EMDK allowing
users to easily load and start their application from micro-SD card.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-31 20:13:29 +03:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Eugeniy Paltsev
f770b3ee18 ARC: HSDK: Enable SPI flash support
HSDK board has sst26wf016 SPI flash IC which we want to support.

Add SPI controller, CS-gpio and SPI flash nodes to hsdk device tree.
Enable corresponding options in hsdk defconfig.

For SPI write functionality to work we need [1] which
adds support of sst26xxx ICs.

[1] https://patchwork.ozlabs.org/project/uboot/list/?series=35796

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-02 12:27:56 +03:00
Eugeniy Paltsev
ada8affdfe ARC: HSDK: Add platform-specific commands
This patch add support of hsdk platform-specific commands:

hsdk_clock set - set clock from axi_freq, cpu_freq and tun_freq
environment variables/command line arguments

hsdk_clock get - save clock frequencies to axi_freq, cpu_freq
and tun_freq environment variables

hsdk_clock print - show CPU, AXI, DDR and TUNNEL current
clock frequencies.

hsdk_clock print_all - show all currently used clock frequencies.

hsdk_init - setup board HW in one of pre-defined configuration
(hsdk_hs34 / hsdk_hs36 / hsdk_hs36_ccm / hsdk_hs38 /
hsdk_hs38_ccm / hsdk_hs38x2 / hsdk_hs38x3 / hsdk_hs38x4)

hsdk_go - run baremetal application on hsdk configured
by hsdk_init command.

This patch changes default behaviour of 'bootm' command:
now we are able to set number of CPUs to be kicked by setting
'core_mask' environment variable before 'bootm' command run.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-02 12:27:56 +03:00
Eugeniy Paltsev
bdc9f02fab ARC: AXS10x: DTS: Remove unused interrupt properties
Some device tree nodes (like ethernet, ohci, ehci) in axs10x_mb.dtsi
were copied from linux device tree, so they have interrupts properties.
As we don't use interrupts in uboot we don't have interrupt controller
node in AXS10x device tree. In result we get warnings when we compile
such device tree.

So remove unused interrupts properties to get rid of this warnings.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-02 12:26:13 +03:00
Eugeniy Paltsev
7897f4e54c ARC: HSDK: DTS: Add cgu-clk node
Add cgu-clk (clock generation unit) node to HSDK device tree.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-01-19 17:59:35 +03:00
Alexey Brodkin
67482f57e6 arc: Add support for HS Development Kit board
ARC HS Development Kit board is a new low-cost
development platform sporting ARC HS38 in real silicon
with nice set of features such as:
 * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz
 * 4Gb of DDR (we use only lowest 1Gb out of it now)
 * Lots of DesigWare peripherals
 * Different connectivity modules:
     - Synopsys HAPS HT3
     - Arduino-compatible connector
     - MikroBUS

This initial commit supports the following peripherals:
 * UART (DW 8250)
 * Ethernet (DW GMAC)
 * SD/MMC (DW Mobile Storage)
 * USB 1.1 & 2.0

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-29 19:34:10 +03:00
Vlad Zakharov
0c77092e81 arc: dts: separate single axs10x.dts file
We want to use the same device tree blobs in both Linux and U-Boot for
ARC boards.

Earlier device tree sources in U-Boot were very simplified and hadn't been
updated for quite a long period of time.

So this commit is the first step on the road to unified device tree blobs.

First of all we re-organize device tree sources for AXS10X boards.
As AXS101 and AXS103 boards consist of AXS10X motherboard and AXC001 and
AXC003 cpu tiles respectively we add corresponding device tree source
files: axs10x_mb.dtsi for motherboard, axc001.dtsi and axc003.dtsi for
cpu tiles and axs101.dts and axs103.dts to represent actual boards.

Also we delete axs10x.dts as it is no longer used.

One more important change - we add timer device to ARC skeleton device
tree sources as both ARC700 and ARCHS cores contain such timer.
We add core_clk nodes to abilis_tb100, nsim, axc001 and axc003 device tree
sources as it is referenced via phandle from timer node in common
skeleton.dtsi file.

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-24 14:47:52 +03:00
Alexey Brodkin
65fcba1251 arc: Rename AXS101 board to more generic AXS10x
As of now we have 2 flavors of ARC SDP boards:
 1) AXS101 - with ARC770 in ASIC
 2) AXS103 - with ARC HS38 in FPGA

Both options share exactly the same base-board and only differ with
CPU-tiles in use. That means all peripherals are the same (they are
implemented in FPGA on the base-board) and so generic board could be
used for both.

While at it:
 * Recreated defconfigs with savedefconfig
 * In include/configs/axs10x.h numerical sizes replaced with
defines from linux/sizes.h for better readability.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05 12:50:33 +03:00
Alexey Brodkin
cc8be222d1 arc: Rename ARCangel4 board to nSIM
ARCangel was one of the main development boards back in the day but
now it's gone and replaced by other boards like ARC SDP.

But we also used to have simulation platform very similar to ARCangel4
in terms of CPU settings as well as basic IO like UART. Even though
ARCangel4 is long gone now we have a replacement for simulation which is
a plain or stand-alone nSIM and Free nSIM.

Note Free nSIM is available for download here:
https://www.synopsys.com/cgi-bin/dwarcnsim/req1.cgi

And while at it:
 * Finally switch hex numerical values in nsim.h to defines from
   include/linux/sizes.h
 * Add defconfigs with ARC HS38 cores
 * Recreated all defconfigs with savedefconfig

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-05 12:50:25 +03:00
Alexey Brodkin
d0602bd467 axs103: add support of generic OHCI USB 1.1 controller
This commit adds support of USB 1.1 storage media on AXS103 board.
For some yet unknown reason USB 2.0 doesn't work on AXS103 board issuing
messages like this:
------------------------>8-------------------
AXS# usb start
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80
unable to get device descriptor (error=-1)
1 USB Device(s) found
------------------------>8-------------------

As a work-around we're falling back to USB 1.1.
Indeed it is much slower but at least USB storage devices are usable on
AXS103.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2015-12-21 23:29:04 +03:00
Alexey Brodkin
8555dd88cd axs10x: add support of generic EHCI USB 2.0 controller
This commit adds support of USB 2.0 storage media on AXS10x boards.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2015-12-08 17:29:56 +03:00
Alexey Brodkin
fb2dea60e8 board: axs10x switch serial port and Ethernet to driver model
With this change Synopsys DesignWare SDP board is switched to driver
model for both serial port (serial_dw) and Ethernet (Designware GMAC).

This simplifies include/configs/axs101.h and allows for reuse of Linux's
Device Tree description.

For simplicity Linux's .dts files are not blindly copied but only very
few extracts of them are really used (those that are supported in U-Boot
at the moment).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-11-18 00:39:22 +03:00
Tom Rini
da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
Masahiro Yamada
0744c2f1ad arc: gitignore: ignore ARC DTBs
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-18 12:06:36 +03:00
Alexey Brodkin
09424d1119 board: Switch Abilis TB-100 board to Driver Model for serial port
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Simon Glass <sjg@chromium.org>
2015-04-03 09:47:49 +03:00
Alexey Brodkin
01496c4fac serial-arc: switch to DM
Now when all infrastructure in ARC is ready for it let's switch ARC UART
to driver model.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Simon Glass <sjg@chromium.org>
2015-04-03 09:47:49 +03:00