Commit graph

65 commits

Author SHA1 Message Date
Ilya Yanok
8cf19b9fec jffs2: some fixes to summary support
This patch fixes some issues with JFFS2 summary support in U-Boot.
1/ Summary support made compilation configurable (as summary support
considered expiremental even in Linux).
2/ Summary code can do unaligned 16-bit and 32-bit memory accesses.
We need to get data byte by byte to exclude data aborts.
3/ Make summary scan in two passes so we can safely fall back to full
scan if we found unsupported entry in the summary.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-08-21 23:29:35 +02:00
Ilya Yanok
b644006e1a jffs2: clean the cache in case of malloc fails in build_lists
We should call jffs2_clean_cache() if we return from jffs2_build_lists()
with an error to prevent usage of incomplete lists. Also we should
free() a local buffer to prevent memory leaks.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-08-18 21:30:58 +02:00
Scott Wood
be33b046b5 Remove legacy NAND and disk on chip code.
Legacy NAND had been scheduled for removal.  Any boards that use this
were already not building in the previous release due to an #error.

The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed.  There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-16 19:07:47 -05:00
Ilya Yanok
584eedab66 jffs2: include <linux/mtd/compat.h> instead of defining own min_t
Include <linux/mtd/compat.h> header for min_t definition instead of
providing our own one. Removes warnings in case of OneNAND support
enabled.

Although I thinks it's a bit silly to include <linux/mtd/compat.h>
just for min_t...

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Stefan Roese <sr@denx.de>
2008-12-16 17:14:54 +01:00
Ilya Yanok
142a80ffc3 jffs2: cache data_crc results
As we moved data_crc() invocation from jffs2_1pass_build_lists() to
jffs2_1pass_read_inode() data_crc is going to be calculated on each
inode access. This patch adds caching of data_crc() results. There
is no significant improvement in speed (because of flash access
caching added in previous patch I think, crc in RAM is really fast)
but this patch impacts memory usage -- every b_node structure uses
12 bytes instead of 8.

Signed-off-by: Alexey Neyman <avn@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-12-09 23:40:01 +01:00
Ilya Yanok
9b7076229e jffs2: summary support
This patch adds support for reading fs information from summary
node instead of scanning full eraseblock.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-12-09 23:39:59 +01:00
Ilya Yanok
70741004dc jffs2: add buffer to cache flash accesses
With this patch JFFS2 code allocates memory buffer of max_totlen size
(size of the largest node, calculated during scan time) and uses it to
store entire node. Speeds up loading. If malloc fails we use old ways
to do things.

Signed-off-by: Alexey Neyman <avn@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-12-09 23:39:58 +01:00
Ilya Yanok
8a36d31f72 jffs2: rewrite jffs2 scanning code based on Linux one
Rewrites jffs2_1pass_build_lists() function in style of Linux's
jffs2_scan_medium() and jffs2_scan_eraseblock().
This includes:
 - Caching flash acceses
 - Smart dealing with free space

Signed-off-by: Alexey Neyman <avn@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-12-09 23:39:16 +01:00
Ilya Yanok
f738469567 jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
We need to update i_version inside cycle to find really latest version
inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
dump_inode() instead of calling expensive jffs2_1pass_read_inode().

Signed-off-by: Alexey Neyman <avn@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2008-12-09 23:38:21 +01:00
Scott Wood
2f77c7f45b JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-10-31 13:51:12 -05:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Kyungmin Park
1a7f8ccec9 Add JFFS2 command support on OneNAND
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-09-06 22:50:08 +02:00
Jean-Christophe PLAGNIOL-VILLARD
08ab4e1780 fs: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-31 04:24:56 +02:00
Jean-Christophe PLAGNIOL-VILLARD
cc4a0ceeac drivers/mtd/nand: Move conditional compilation to Makefile
rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:43 +02:00
Wolfgang Denk
b64f190b7a Fix printf() format issues with sizeof_t types by using %zu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-14 15:06:35 +02:00
Wolfgang Denk
d5996dd555 Fix some more printf() format problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-13 19:51:00 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0a5676befb Fix some more printf() format issues.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-13 16:55:00 +02:00
Stuart Wood
86d3273e2b jffs2_1pass.c: add watchdog support
Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
2008-06-29 19:51:12 +02:00
Stelian Pop
5922db6c09 Cleanup nand_info[] declaration.
The nand_info array is declared as extern in several .c files.
Those days, nand.h contains a reference to the array, so there is
no need to declare it elsewhere.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-05-28 11:06:25 -05:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Wolfgang Denk
707fa917cc jffs2_1pass.c: fix incompatible pointer type warning
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-28 22:01:04 +02:00
Marcel Ziswiler
7817cb2083 fix comments with new drivers organization
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-01-09 21:48:49 +01:00
Grant Likely
f0037c56b0 Build: split COBJS value into multiple lines
This change is in preparation for condtitionial compile support in the
build system.  By spliting them all into seperate lines now, subsequent
patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
be less invasive and easier to review

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:05:18 -07:00
Jon Loeliger
f40a7f3e38 fs/: Remove lingering references to CFG_CMD_* symbols.
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 11:07:56 -05:00
Jon Loeliger
dd60d1223b fs/: Remove obsolete references to CONFIG_COMMANDS
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 17:56:50 -05:00
Wolfgang Denk
e4dbe1b215 Fixing some typos etc. introduced mainly by cfg patches.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-07-05 17:56:27 +02:00
Jon Loeliger
4e109ae982 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:23:12 +02:00
Michal Simek
144876a380 [PATCH] MTD partition support, JFFS2 support 2007-04-24 23:01:02 +02:00
Wolfgang Denk
2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s"
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Marian Balakowicz
6db3970811 Fix JFFS2 support for legacy NAND driver.
Some more NAND cleanup and small fixes.
2006-04-08 19:08:06 +02:00
Wolfgang Denk
09e4b0c5d3 Add support for Lite5200B board.
Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-17 11:42:53 +01:00
Wolfgang Denk
74f92e6a3f Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
Patch by Rick Bronson, 15 Jun 2005
2006-03-12 16:05:05 +01:00
Bartlomiej Sieka
addb2e1650 Re-factoring the legacy NAND code (legacy NAND now only in board-specific
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
Bartlomiej Sieka
038ccac511 Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling. 2006-02-24 09:37:22 +01:00
Wolfgang Denk
84bd92bdda Merge with /home/m8/git/u-boot 2005-10-15 18:23:43 +02:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Marian Balakowicz
e6f2e90233 Added support for TQM834x boards. 2005-10-11 19:09:42 +02:00
Wolfgang Denk
ac7eb8a315 Update of new NAND code
Patch by Ladislav Michl, 13 Sep 2005
2005-09-14 23:53:32 +02:00
Wolfgang Denk
05b47540aa Merge with testing-NAND (Rewrite of NAND code) 2005-08-17 12:57:49 +02:00
Wolfgang Denk
932394ac43 Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005
2005-08-17 12:55:25 +02:00
Wolfgang Denk
87b8bd5aed Fix return values of the jffs2 commands ls/fsload/fsinfo,
so we can use them to, e.g., check the existence of a file with
"if ls foo; then this; else that; fi" in the hush shell
Patch by Andreas Engel, 16 August 2005
2005-08-16 09:32:45 +02:00
Wolfgang Denk
8f79e4c2da Add configuration for IFM AEV FIFO board.
Minor coding style cleanup.
2005-08-10 15:14:32 +02:00
Wolfgang Denk
700a0c648d Add common (with Linux) MTD partition scheme and "mtdparts" command
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
2005-08-08 01:03:24 +02:00
wdenk
412babe304 It's better to handle LZO and LZARI compression mdoes for JFFS2 with
a single #define.
2005-05-05 09:51:44 +00:00
wdenk
07cc099941 Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.
2005-05-05 00:04:14 +00:00
wdenk
cf8bc5773c Fix problem with symbolic links in JFFS2 code. 2005-05-04 23:50:54 +00:00
wdenk
02b11f8e09 Patch by Klaus Heydeck, 12 May 2004:
Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
various changes to KUP4 board specific files
2004-05-12 22:54:36 +00:00
wdenk
32877d66aa * Fix memory leak in the NAND-specific JFFS2 code
* Fix SL811 USB controller when attached to a USB hub
2004-05-05 19:44:41 +00:00
wdenk
2729af9d54 * Fix minor NAND JFFS2 related issue
* Fixes for SL811 USB controller:
  - implement workaround for broken memory stick
  - improve error handling

* Increase packet send timeout to 10 ms in cpu/mpc8xx/scc.c to better
  cope with congested networks.
2004-05-03 20:45:30 +00:00