Commit graph

1270 commits

Author SHA1 Message Date
Philipp Tomsich
a740ee913e lib: merge CRC16-CCITT into u-boot/crc.h
This merges the CRC16-CCITT headers into u-boot/crc.h to prepare for
rolling CRC16 into the hash infrastructure.  Given that CRC8, CRC32
and CRC32-C already have their prototypes in a single header file, it
seems a good idea to also include CRC16-CCITT in the same.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-08 20:18:32 -05:00
Marek Vasut
cf345760bd mmc: Do not issue CMD 6 on SD 1.00 and SD 1.01
According to SD Specifications Part 1 Physical Layer Simplified Specification
Version 6.00 August 29, 2018, section 4.3.10 (Switch Function Command) and
section 5.6 (SCR register), SD cards version 1.00 and 1.01 do not support the
SD CMD 6.

Currently, U-Boot will issue CMD 6 unconditionally in sd_set_card_speed()
while configuring the bus for selected frequency. This will make SD cards
version 1.00 and 1.01 time out and thus fail detection altogether.

Fix this by not sending CMD 6 on such cards. Tested on Matsushita Electric
Industrial Co., Ltd. Japan RP-SD008B / Victor 8MB SD card, CU-SD008, which
is correctly detected with this patch as:

Device: sd@ee160000
Manufacturer ID: 1
OEM: 5041
Name: S008B
Bus Speed: 25000000
Mode : SD Legacy
Rd Block Len: 512
SD version 1.0
High Capacity: No
Capacity: 6.5 MiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-04 09:21:06 +01:00
Marek Vasut
50aa1d99ed mmc: tmio: sdhi: Add HS400 support
Add support for the HS400 mode to SDHI driver. This uses the up-tune
mechanism from already supported HS200 tuning.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03 12:51:17 +01:00
Marek Vasut
95ead3d98d mmc: tmio: sdhi: Move tap_pos to private data
Move the tap_pos variable, which is the HS200/HS400/SDR104 calibration
offset, into private data, so it can be passed around. This is done in
preparation for the HS400 mode, which needs to adjust this value.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03 12:51:17 +01:00
Marek Vasut
d34bd2deda mmc: tmio: sdhi: Filter out HS400 on certain SoCs
Filter out HS400 support on SoCs where HS400 is not supported yet.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03 12:51:17 +01:00
Marek Vasut
ed427dab2e mmc: tmio: Reorder TMIO clock handling
Reorder the tmio_sd_set_clk_rate() function such that it handles all
of the clock requiests correctly. Specifically, before this patch,
clock request with (mmc->clock == 0 && mmc->clk_disable) could leave
the clock enabled, as the function would exit on if (!mmc->clock)
condition on top and will not handle the mmc->clk_disable at all.

Rather than band-aid fixing just that particular problem, reorder
the entire function to make it easier to understand and verify that
all the cases are covered. The function has three sections now:

First, if mmc->clock != 0, we calculate divider for the SD block.
Second, if mmc->clock != 0 and SD block clock are enabled and
           current divider is not equal to the new divider, then
           stop the clock and update the divider.
Third, if mmc->clk_disable is set, disable the clock, otherwise
       enable the clock. This happens independently of divider
       update now.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03 12:51:16 +01:00
Marek Vasut
59d529afdc mmc: tmio: Keep generating clock when clock are enabled
The TMIO core has a feature where it can automatically disable clock output
when the bus is not in use. While this is useful, it also interferes with
switching the bus to 1.8V and other background tasks of the SD/MMC cards,
which require clock to be enabled.

This patch respects the mmc->clk_disable and only disables the clock when
the MMC core requests it. Otherwise the clock are continuously generated
on the bus.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03 12:51:16 +01:00
Marek Vasut
6f8f20f85d mmc: tmio: Do not set divider to 1 in DDR mode
The TMIO core has a quirk where divider == 1 must not be set in DDR modes.
Handle this by setting divider to 2, as suggested in the documentation.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-03 12:51:16 +01:00
Marek Vasut
8ec6a04b6b mmc: tmio: Switch to clock framework
Switch the driver to using clk_get_rate()/clk_set_rate() instead of
caching the mclk frequency in it's private data. This is required on
the SDHI variant of the controller, where the upstream mclk need to
be adjusted when using UHS modes.

Platforms which do not support clock framework or do not support it
in eg. SPL default to 100 MHz clock.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
---
V2: - Fix build on certain platforms using SPL without clock framework
V3: - Turn clk_get_rate into a callback and fill it as needed on both
      renesas and socionext platforms
2018-12-03 12:51:16 +01:00
Marek Vasut
eb2acbafff mmc: Parse HS400 DT properties
Add HS400 properties parsing support to mmc_of_parse().

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
2018-12-03 12:51:16 +01:00
Tom Rini
93e72ac472 Cleanup and update towards support for Amlogic Meson AXG SoCs :
- mmc: meson-gx: Add AXG compatible
 - net: designware: add meson meson compatibles
 - Amlogic Meson cleanup for AXG SoC support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb/AwoAAoJEHfc29rIyEnR2dMQANCsuWQzKASCLgUzeL/KWhQ8
 gj1YEVGbS0meQ35hNo0hL6qfN4VkjazawyWnb40HVVADBjil42QuxN9rncovg69Q
 ZvPEo4XYNCkDzOU3UmoR2rjxxGICVFY6GCOuNbqzvB2x4gWJmoUeByqewKW2g2Zp
 jyjbzYvJ+r8wLtUFbdqaGvsHHC8hiIkjyeaqdXUc6NHJrGYasRuOsCO92bEioYC1
 XPh76c2ABAnbzJy7GArdlBbDOQrQxoEskVeP47ZjiPywXxGCkgHaRSXaUKzpz30G
 8MrA5AciL6pmurmsM0APlgvJwL7qaX1P6NxiJ+12prWWfAk1ZC2/MEKVZY+gO/CF
 vUAyzhus1oJ5JjccCngy/1ftkIReueSbUrzGYFvqhihs9g4QyRpi7F5MDKX0MvP2
 uk+XXStXs+rOZ2YdMFlV8l6G12TijcViZVmVHdh8qdl4t8WFlv7gENVUM+0mhyu2
 x5OsoYz5w2h9hCh/CB3oIZfyJBe5VZVHZ2fWIRZJ72J7toUGMewlKYQq2LOv7A9q
 w6vRGnza3fSPUZgYenznohaeo9vXG/WX7cNSPQiNBoiGeC+Y2ko5NHe2MIEnUD4c
 amp21KA6rWnWeHHvDbwo5DJ+NhCd6uMgkiZDLCuiTtns1/a03l0V6kgOvQLIBjhK
 KxBWBn6+rDPq1wJxhxab
 =Oo1g
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogic

Cleanup and update towards support for Amlogic Meson AXG SoCs :
- mmc: meson-gx: Add AXG compatible
- net: designware: add meson meson compatibles
- Amlogic Meson cleanup for AXG SoC support
2018-11-29 15:16:58 -05:00
Weijie Gao
d24b693959 mmc: mtk-sd: add SD/MMC host controller driver for MT7623 SoC
This patch adds MT7623 host controller driver for accessing SD/MMC.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28 23:04:54 -05:00
Neil Armstrong
3e3f701059 mmc: meson-gx: Add AXG compatible
Add the compatible string for the upcoming Amlogic AXG SoC family.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26 14:39:57 +01:00
Vasily Khoruzhick
0e21a2ffb3 sunxi-mmc: use new mode on both controllers on A64
Using new mode improves stability of eMMC and SD cards. Without
it SPL fails to load u-boot from SD on Pinebook.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # Amarula A64-Relic
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-22 13:20:16 +05:30
Vasily Khoruzhick
629d267a97 sunxi-mmc: don't double clock for new mode unconditionally
Comment in Linux driver says that clock needs to be doubled only
if we use DDR modes, moreover divider has to be set accordingly.

U-boot driver doesn't declare support for any DDR modes and doesn't
set internal clock divider in CLKCR, so it doubles clock
unconditionally when new mode is used.

Some cards can't handle that and as result SPL fails to load u-boot.

Fixes: de9b1771c3 ("mmc: sunxi: Support new mode")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # Amarula A64-Relic
2018-11-22 13:19:42 +05:30
Vasily Khoruzhick
2a8882ecef sunxi-mmc: introduce new MMC_SUNXI_HAS_MODE_SWITCH option
Allwinner A64 has new mode but doesn't have a mode switch in CCM,
and CCM_MMC_CTRL_MODE_SEL_NEW is not defined, so compilation fails
if MMC_SUNXI_HAS_NEW_MODE is enabled

Introduce new MMC_SUNXI_HAS_MODE_SWITCH option to be able to ifdef usage
of CCM_MMC_CTRL_MODE_SEL_NEW

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
[jagan: update commit message]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # Amarula A64-Relic
2018-11-22 13:19:19 +05:30
Tom Rini
1d6edcbfed - virtio implementation and supporting patches
- DM_FLAG_PRE_RELOC fixes
 - regmap improvements
 - minor buildman and sandbox things
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlvsxt8RHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebPtQgAxR8bKdTNODUuVrw5OUIl40ziKQvNIlG5
 uiVsQLDI7Cd9D3Yls8yNffXqkNcQj+0/MJa38UZsm32c/uR4PU0zyFxpz4mwgyXk
 ZMrJ15AEAxf4IOHjbh52sNgR2mw+PeP9A3NO5LnZAMd/rnRF2MgBTy28FvjsBlNn
 z4OUjUpNv4ePND0QQ1EoGPlYotYPASEw8iK1pc5L+Rwq/ponAnNqegKIxQtiMugY
 kLtuFe0JJ704T20UkwYvI8LsnuB50ANRLLMyy5JLy1UtCpS24cc86ml49IKk3pqb
 v4GbnMI67s7S+Imzm4A7Mg8fgGnkkpLqacI3gnlpbIPkLrqRM2C20g==
 =RORj
 -----END PGP SIGNATURE-----

Merge tag 'pull-14nov18' of git://git.denx.de/u-boot-dm

- virtio implementation and supporting patches
- DM_FLAG_PRE_RELOC fixes
- regmap improvements
- minor buildman and sandbox things
2018-11-16 08:37:50 -05:00
Tom Rini
6f44333018 Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2018-11-14 18:25:34 -05:00
Bin Meng
223b10ca7a mmc: omap: Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be
bound before relocation. However due to a bug in the DM core,
the flag only takes effect when devices are statically declared
via U_BOOT_DEVICE(). This bug has been fixed recently by commit
"dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in
lists_bind_fdt()", but with the fix, it has a side effect that
all existing drivers that declared DM_FLAG_PRE_RELOC flag will
be bound before relocation now. This may expose potential boot
failure on some boards due to insufficient memory during the
pre-relocation stage.

To mitigate this potential impact, the following changes are
implemented:

- Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver
  only supports configuration from device tree (OF_CONTROL)
- Keep DM_FLAG_PRE_RELOC flag in the driver only if the device
  is statically declared via U_BOOT_DEVICE()
- Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for
  drivers that support both statically declared devices and
  configuration from device tree

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:28 -08:00
Bin Meng
d0851c8937 blk: Call part_init() in the post_probe() method
part_init() is currently called in every DM BLK driver, either
in its bind() or probe() method. However we can use the BLK
uclass driver's post_probe() method to do it automatically.

Update all DM BLK drivers to adopt this change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Vasily Khoruzhick
20940ef2a3 mmc: sunxi: add support for automatic delay calibration
A64 and H6 support automatic delay calibration and Linux driver uses it
instead of hardcoded delays. Add support for it to u-boot driver.

Fixes eMMC instability on Pinebook

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Cc: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-11-13 22:07:39 +05:30
Marek Vasut
26cc40d8c4 mmc: dw_mmc: Add RCRC handling
This patch adds check for command response CRC failure. The driver
is currently ignoring CRC check failure on command resposes which
have CRC atteched to it, which can be potentially dangerous. Even
more grueling problem happens when the command response is followed
by data transfer though, as in that case, the dwmci_data_transfer()
function will spin until it reaches the 240s timeout.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-10 08:16:30 -05:00
Marek Vasut
a376dde1de mmc: tmio: sdhi: Merge DTCNTL access into single register write
It is perfectly fine to write th DTCNTL TAP count and enable the
SCC sampling clock operation in the same write.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 16:07:04 +01:00
Marek Vasut
2fc10754d1 mmc: tmio: sdhi: Implement waiting for DAT0 line state
When the bus switches to 1.8V mode of operation, it is necessary to
verify that the card correctly initiated and completed the voltage
switch. This is done by reading out the state of DATA0 line.

This patch implement support for reading out the state of the DATA0
line, so the MMC core code can correctly switch to 1.8V mode.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 16:04:45 +01:00
Marek Vasut
dc1488f1d2 mmc: tmio: sdhi: Clear HS400 settings when resetting SCC
Make sure to clear HS400 configuration when resetting the SCC block.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 16:04:45 +01:00
Marek Vasut
52e1796883 mmc: tmio: sdhi: Touch SCC only when UHS capable
Add check to avoid touching the SCC tuning registers in case the IP
doesn't support them or if the support isn't in place yet.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 16:04:44 +01:00
Marek Vasut
c83da2ebc0 mmc: tmio: Preinitialize regulator to 3.3V
Preinitialize the SD card signals regulator to 3.3V, which is the
default post-reset setting, to be sure the regulator is set to a
valid value.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 15:57:14 +01:00
Marek Vasut
8171f99e7d mmc: tmio: Configure clock before any other IOS
Configure the clock settings before reconfiguring any other IO settings.
This is required when the clock must be stopped before changing eg. the
pin configuration or any of the other properties of the bus. Running the
clock configuration first allows the MMC core to do just that.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 15:57:14 +01:00
Marek Vasut
33633ebb1c mmc: tmio: Silence transfer errors when tuning
In case the controller performs card tuning, that is, sends MMC
command 19 or 21, silence possible CRC error warning prints. The
warnings are bound to happen, since the tuning will fail for some
settings while searching for the optimal configuration of the bus
and that is perfectly OK.

This patch passes around the MMC command structure and adds check
into tmio_sd_check_error() to avoid printing CRC error warning
when the tuning happens.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 15:57:14 +01:00
Marek Vasut
b22c8d0de4 mmc: tmio: Improve error handling
Properly handle return values and abort operations when they are
non-zero. This is a minor improvement, which fixes two remaining
unchecked return values.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 15:57:14 +01:00
Marek Vasut
645a575aeb mmc: tmio: Simplify pinmux handling
The SD UHS SDR12, SDR25, SDR50, SDR104, DDR50 and MMC HS200, HS400
modes all use 1.8V signaling, while all the legacy modes use 3.3V
signaling. While there are extra modes which use 1.2V signaling,
the existing hardware does not support those.

Simplify the pinmux such that 3.3V signaling implies legacy mode
pinmux and the rest implies UHS mode pinmux. This prevents the
massive case statement from growing further. Moreover, it fixes
an edge case where during SD 1.8V switch, the bus mode is still
set to default while the signaling is already set to 1.8V, which
results in an attempt to communicate with a 1.8V card using pins
in 3.3V mode and thus communication failure.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 15:57:14 +01:00
Tom Rini
cf033e04da Merged imx8 architecture, fix build for imx8 + warnings
-----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlvRk0gPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3IuAL/0jfCqEIzKbPXIz81zJ+43ZNPsyu4LluUFsP
 2s5+yKN4zPnxDaHmVyxKynREqCNCcbfz7biStEPRzIjQYPBWUWrqz1yceqvOTqWQ
 eh51ItNeow28IlnVEr40e5cNL28KPsAdO8Tx6yNiXdPndPOgm3DuFlT+Xbnv2/+P
 X9GYBoCD7EQ3aUJBDUKcN/AFSAl8YCQ43FKhowM18/ExeURiKk8YDRXVFgTDDd4J
 HIlzUbyeIG24xfmxc0MsUMEufMjqQE7k/tMfFvQJiwLBLkzuO+1WmbPlWd7XHqco
 t68mheBcm8m2G/CZJoxCy8ymUi5PKDJBhw3qQz646h+JiXP1lg7Yw8hf4nREV56k
 v/bMiDU1exIflI9Qf8CibxRAYv3bjKJD6p/uua2CIvsLO4emLPbi7DHFBdaQq+WB
 r32O0Xc6LiRBIhr/qeL/5HmxFT2o4lo+O9ybo10uhK8RA1LTPlQ0UNMwmSPLl4zR
 7e5YwnRCcHV492+/Fn31LWXUUVVxVw==
 =kkpS
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imx

Merged imx8 architecture, fix build for imx8 + warnings
2018-10-25 10:16:21 -04:00
Peng Fan
3cb1450380 mmc: fsl_esdhc: add uclass clk support
When CONIFG_CLK is enabled, use uclass clk api to handle
the clock.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 13:00:09 +02:00
Ye Li
d423c93b66 fsl_esdhc: Update usdhc driver to support i.MX8
Add CONFIG_ARCH_IMX8 to use the 64bits support in usdhc driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
2018-10-22 13:00:09 +02:00
Michal Simek
ec48b6c991 arm64: versal: Add support for new Xilinx Versal ACAPs
Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
Engines with leading-edge memory and interfacing technologies to deliver
powerful heterogeneous acceleration for any application. The Versal AI
Core series has five devices, offering 128 to 400 AI Engines. The series
includes dual-core Arm Cortex™-A72 application processors, dual-core Arm
Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more
than 1,900 DSP engines optimized for high-precision floating point with
low latency.

The patch is adding necessary infrastructure in place without enabling
platform which is done in separate patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 16:53:21 +02:00
Marek Vasut
beced53a74 mmc: tmio: Limit DMA to 32bit on R-Car Gen3
The internal DMAC on Gen3 is 32bit only, limit the DMA address
range to 32bit.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-09 17:21:44 +02:00
Marek Vasut
92bde154ec mmc: tmio: Pass full address to tmio_sd_addr_is_dmaable()
Pass the entire source data pointer to tmio_sd_addr_is_dmaable()
so we don't have to apply casts throughout the code.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-09 17:21:43 +02:00
Jens Wiklander
4853ad3e13 mmc: rpmb: add mmc_rpmb_route_frames()
Adds mmc_rpmb_route_frames() to route RPMB data frames from/to an
external entity.

Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07 10:47:38 -04:00
Heiko Stuebner
26a52f3473 rockchip: dwmmc: add rk2928-dw-mshc compatible
The rk3188 works nicely with the rockchip mmc driver, so we just need
to add the different compatible for it - as used in the Linux kernel.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-02 09:35:09 +02:00
Heiko Stuebner
05fa06b960 mmc: dw_mmc: check fifo status with a timeout in fifo mode
While trying to enable the dw_mmc on rk3188 I managed to confuse
and hang the dw_mmc controller into not delivering further data.
The fifo state never became ready and the driver was iterating in
the while loop reading 0-byte packets forever.

So inspired by how other implementations handle this, check the fifo-
state beforhand and add a timeout to catch any glaring fifo issues
without hanging uboot altogether.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-02 09:35:09 +02:00
Adam Ford
f4df405f0e mmc: omap_mmc: Remove invert references
With DM_GPIO and DM_MMC translating GPIO_ACTIVE_LOW, any boards
using the 'cd-invert' option will no longer need to do this.  This
patch removes the support for 'invert' from the MMC driver.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Fix warning over when !DM_GPIO]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-29 08:06:56 -04:00
Adam Ford
03190a7888 mmc: omap_hsmmc: Fix pbias for omap3_logic to enable CD pin
The MMC card detect pin is connected to gpio127 on omap3_logic.
When setting up the pbias register for MMC, let's also enable
gpio_127 for the card detect.  As part of the package deal,
gpio_126 and gpio_129 are also enabled.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-25 21:49:18 -04:00
Adam Ford
04355de71d MMC: davinici_mmc: Enable CD and WP with DM and OF_CONTROL
When used with a device tree, this will extract the card detect
and write protect pins from the device tree and configure them
accordingly.  This assumes the GPIO_ACTIVE_LOW/HIGH is supported
by da8xx_gpio.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-11 21:49:02 -04:00
Adam Ford
df6565c36c MMC: Enable DM_MMC for Davinci
With CONFIG_BLK becoming a requirement, the Davinci MMC driver
needs to be updated with DM_MMC support.  Since SPL is tiny and
many boards do not support DM in SPL, this retains the backwards
compatibility for those boards who need to initialize MMC manually
in SPL.

Signed-off-by: Peter Howard <phoward@gme.net.au>
Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-11 21:40:17 -04:00
Adam Ford
307a214329 mmc: omap_hsmmc: Make DM_GPIO calls dependent on DM_GPIO
The getcd and getwp functions when DM_MMC is enabled are
assumming the DM_GPIO is enabled.  In cases (like SPL) where
DM_GPIO may not be enabled, wrap these calls in an #ifdef

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-11 21:39:11 -04:00
Tom Rini
d1e15041ab Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2018-09-11 08:50:10 -04:00
Lokesh Vutla
aaa449fb27 mmc: k3_arasan: Add sdhci driver support for K3 family SoCs
AM654 has an arasan sdhci controller and a mmc phy attached to it.
Add basic support for K3 specific arasan sdhci controller.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00
Masahiro Yamada
c3ab1e118f mmc: uniphier-sd: sync with Linux
Sync with the driver code and the binding recently merged in Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-11 20:37:18 +09:00
Peng Fan
c76382ff7f mmc: fsl_esdhc: enable HS400 feature
The strobe dll code is ported from Linux Kernel:
drivers/mmc/host/sdhci-esdhc-imx.c
The comments are from the above file,
"For HS400 eMMC, there is a data_strobe line. This signal is generated
by the device and used for data output and CRC status response output
in HS400 mode. The frequency of this signal follows the frequency of
CLK generated by host. The host receives the data which is aligned to the
edge of data_strobe line. Due to the time delay between CLK line and
data_strobe line, if the delay time is larger than one clock cycle,
then CLK and data_strobe line will be misaligned, read error shows up.
So when the CLK is higher than 100MHz, each clock cycle is short enough,
host should configure the delay target. "

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2018-09-10 20:48:19 -04:00
Peng Fan
3dd2626f48 mmc: add HS400 support
Add HS400 support.
Selecting HS400 needs first select HS200 according to spec, so use
a dedicated function for HS400.
Add HS400 related macros.
Remove the restriction of only using the low 6 bits of
EXT_CSD_CARD_TYPE, using all the 8 bits.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-09-10 20:48:19 -04:00