Commit graph

332 commits

Author SHA1 Message Date
Steve Rae
e016f0b2c2 fastboot: implement Kconfig
implement Kconfig for the 'fastboot' feature set

Signed-off-by: Steve Rae <steve.rae@raedomain.com>
2016-08-20 14:03:23 -04:00
Xu Ziyuan
9424f14183 usb: dwc2 : invalidate dcache before starting DMA
Invalidate dcache before starting the DMA to ensure coherency. In case
there are any dirty lines from the DMA buffer in the cache, subsequent
cache-line replacements may corrupt the buffer in memory while the DMA
is still going on. Cache-line replacement can happen if the CPU tries to
bring some other memory locations into the cache while the DMA is going
on.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-25 20:44:19 -06:00
Xu Ziyuan
4711788267 usb: dwc2-otg: adjust fifo size via platform data
The total FIFO size of some SoCs may be different from the existen, this
patch supports fifo size setting from platform data.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-25 20:44:19 -06:00
Steve Rae
9bc34799c8 fastboot: sparse: resync common/image-sparse.c (part 2)
- update fastboot_okay() and fastboot_fail()

This file originally came from upstream code.

While retaining the storage abstraction feature, this is the second
set of the changes required to resync with the
  cmd_flash_mmc_sparse_img()
in the file
  aboot.c
from
  https://us.codeaurora.org/cgit/quic/la/kernel/lk/plain/app/aboot/aboot.c?h=LE.BR.1.2.1

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-27 16:37:38 -04:00
Steve Rae
64ece84854 fastboot: sparse: remove session-id logic
This "session-id" alogrithm is not required, and currently corrupts
the stored image whenever more the one "session" is required.

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-27 16:36:33 -04:00
Steve Rae
f221db0ed5 usb: dwc2_udc_otg: support 8-bit interface
Define CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8 to allow the
physical interface to be 8-bit (rather than 16-bit).

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-13 15:16:34 +02:00
Peng Fan
12ff19dbfd usb: gadget: dfu: discard dead code
Reported by Coverity:
Logically dead code (DEADCODE)
dead_error_line: Execution cannot reach this statement:
(f_dfu->strings + --i).s = ....

If calloc failed, i is still 0 and no need to call free,
so discard the dead code.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: "Łukasz Majewski" <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2016-05-06 20:06:56 +02:00
Vagrant Cascadian
eae4b2b67b Fix spelling of "occurred".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-02 18:37:09 -04:00
Roger Quadros
4d5b637843 usb: s3c-otg: Fix remaining bytes in debug messages
Remaining bytes means bytes that are not yet transferred
and not the bytes that were transferred in the last transfer.

Reported-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Steve Rae <srae@broadcom.com>
[Test HW: bcm28155_ap board]
2016-04-25 17:56:30 +02:00
Roger Quadros
842769ea51 usb: s3c-otg: Fix short packet for request size > ep.maxpacket
Request size can be greater than ep.packet and still end in a
short packet. We need to tackle this case as end of transfer
(if short_not_ok is not set) as indicated in USB 2.0 Specification [1],
else we get stuck up on certain protocols like fastboot.

[1] - USB2.0 Specification, Section 5.3.2 Pipes

Reported-by: Steve Rae <steve.rae@broadcom.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Steve Rae <steve.rae@broadcom.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2016-04-25 17:56:30 +02:00
Roger Quadros
ac484c5a6a fastboot: Clean up bulk-out logic
Just use ep->maxpacket to get the maxpacket size
and simplify the bulk-out maxpacket alignment.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Steve Rae <srae@broadcom.com>
2016-04-25 17:56:30 +02:00
Roger Quadros
8b704a0e3d fastboot: Enable the respective speed endpoints at runtime
In a dual speed configuration we need to check at runtime if
we want to enable the Full-Speed or High-Speed endpoint.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Steve Rae <srae@broadcom.com>
[Test HW: bcm235xx board]
2016-04-25 17:56:30 +02:00
Roger Quadros
718156ad0a fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
wMaxPacketSize for IN endpoing in High-Speed must be 512 and not 64.
While fixing that we do some clean ups like

- use cpu_to_le16(decimal_length) instead of hexadecimal length.
- No need to initialize bInterval to 0. Static variables are 0 initialized.
- Move descriptor setting from fastboot_add to to fastboot_bind.
- check for dual speed configuration before setting the high speed descriptors.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Steve Rae <srae@broadcom.com>
Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm235xx board]
2016-04-25 17:56:30 +02:00
Sam Protsenko
e6c0bc0643 usb: gadget Move: CONFIG_G_DNL_* to Kconfig
And also reformat defconfigs using "make savedefconfig" rule.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:28 +02:00
Sam Protsenko
aaa4a9e313 usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to Kconfig
While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some
config headers. This is also probably fixes am335x_baltos board.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko
3457bbaf22 usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig
Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and
make all UDC controllers select USB_GADGET_DUALSPEED:
  - add next options to Kconfig selecting USB_GADGET_DUALSPEED:
    - USB_GADGET_ATMEL_USBA
    - USB_GADGET_DWC2_OTG
    - USB_DWC3
    - CI_UDC
  - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED

While at it, make some related fixes:
  - remove DUALSPEED from configs that don't enable gadget support:
    - kwb.h
    - tseries.h
  - add missing USB_GADGET option to next configs:
    - novena_defconfig
    - pcm051_rev*_defconfig
    - xfi3_defconfig

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko
a59a77f863 usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
The description was borrowed from kernel. Definitions were added to
defconfig files in a way that "make savedefconfig" generates exactly
the same file as used defconfig.

Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use
2 mA (as minimal allowed by Kconfig).

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
John Tobias
5b718407ed USB: g_dnl: Change device class
The USB Mass Storage (ums) works in Windows, Linux and OS X (EL Capitan).
But, not in OS X (Yosemite). By applying the said patch, it extends
the ums support.

Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

Test HW: Odroid XU3 (./test/py UMS + DFU tests)

Tested-by: John Tobias <john.tobias.ph@gmail.com>

Linux:
    - Run ums to expose all my eMMC partition - shows all correctly
    - Run ums to expose only 1 partition of my eMMC - show correctly

Windows:
    - Run ums to expose all my eMMC partition - it detects but it prompts,
    if I want to format it (due to a non windows partition)
    - Run ums to expose only the FAT32 partition - it show the partition
      correctly.
2016-04-20 11:43:27 +02:00
Steve Rae
cf12547385 usb: bcm_udc_otg: enable clocks
Turn on the USB OTG clocks.

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-04-10 17:18:43 +02:00
Rob Herring
74322201dd fastboot: allow retrieving fastboot variables from env
Some boards need to expose device specific variable through fastboot
(to adpat the flashing script depending on hardware revision for
example).

Provide a way to expose custom fastboot variables. Note that all
variables meant to be exposed through fastboot should be be prefixed
with 'fastboot.', the variable should not exceed 32 bytes (including
the prefix and the trailing '\0') and the variable content should
fit in the response buffer (60 bytes excluding the 'OKAY' prefix and
the trailing '\0').

Signed-off-by: Rob Herring <rob.herring@linaro.org>
[Boris Brezillon: add a commit message]
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Steve Rae <srae@broadcom.com>
2016-04-01 17:17:40 -04:00
Sam Protsenko
f9d0fd8a56 usb: gadget: Move CONFIG_USB_GADGET to Kconfig
The description was borrowed from kernel. "tristate" type was changed
to "bool" (I believe we don't support modules for u-boot yet, right?).
CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
as well.

Definitions were added to defconfig files in a way that
"make savedefconfig" generates exactly the same file as used defconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Add zynq_zc702 conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-25 15:29:48 -04:00
Sam Protsenko
8038f6d288 usb: gadget: composite: Correct recovery path for register
In case when usb_composite_register() failed once (for whatever reason),
it will fail further even if all conditions are correct. Example:

    => fastboot 2
    Invalid Controller Index
    couldn't find an available UDC
    g_dnl_register: failed!, error: -19
    exit not allowed from main input shell.

    => fastboot 0
    g_dnl_register: failed!, error: -22
    exit not allowed from main input shell.

Despite that 0 is correct index for USB controller, "fastboot 0" command
will fail, because "composite" structure wasn't cleared properly on
previous fail (on "fastboot 2" command).

This patch fixes that erroneous behavior, allowing us to use composite
even after previous failure.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-03-01 14:47:26 +01:00
Steve Rae
a18c2706f1 fastboot: update error and warning messages
Fix the formatting in error messages, and demote one error message
to a warning, as it is only informational.

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-02-24 19:12:33 +01:00
Lukasz Majewski
fc18f8d170 dfu: usb: f_dfu: Set deferred call for dfu_flush() function
This patch fixes situation when one would like to write large file into
medium with the file system (fat, ext4, etc).
This change sets file size limitation to the DFU internal buffer size.

Since u-boot is not supporting interrupts and seek on file systems, it
becomes challenging to store large file appropriately.

To reproduce this error - create large file (around 26 MiB) and sent it
to the target board.

Lets examine the flow of USB transactions:

0. DFU uses EP0 with 64B MPS [Max Packet Size]

1. Send file - OUT (PC->target) - dat_26MiB.img is sent with 4096 B transactions

2. Get status - OUT (PC->target) - wait for DFU_STATE_dfuDNLOAD_IDLE (0x05) sent
				   from target board - IN transaction
				   (target->PC)

3. The whole file content is sent to target - OUT (PC->target) with ZLP [Zero
					      Length Packet]

Now the interesting part starts:

4. OUT (PC->target) Setup transaction (request to share DFU state)

5. IN (target->PC) - reply the current DFU state
	- In the UDC driver the req->completion (with dfu_flush) is called
	  after successful IN transfer.
	- The dfu_flush() (called from req->completion callback) saves the
	  whole file at once (u-boot doesn't support seek on fs).
	  Such operation takes considerable time. When the file
	  is large - e.g. 26MiB - this time may be more than 5 seconds.

6. OUT (PC->target) - ZLP, is send in the same time when dfu_flush()
 writes data to eMMC memory.
 The dfu-util application has hard coded timeout on USB transaction
 completion set to 5 seconds (it uses libusb calls).

When the file to store is large (e.g. 26 MiB) the time needed to write it
may excess the dfu-util timeout and following error message will be displayed:
"unable to read DFU status" on the HOST PC console.

This change is supposed to leverage DFU's part responsible for storing files
on file systems. Other DFU operations - i.e. raw/partition write to NAND and
eMMC should work as before.

The only functional change is the error reporting. When dfu_flush() fails
the u-boot prompt will exit with error information and dfu-util application
exits afterwards as well.

Test HW:
- Odroid XU3 (Exynos5433) - test with large file
- Trats (Exynos4210) - test for regression - eMMC, raw,

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reported-by: Alex Gdalevich <agdalevich@axion-biosystems.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Heiko Schocher <hs@denx.de>
2016-02-24 19:12:32 +01:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Frank Wang
8c9b4d5598 usb: gadget: dwc2_udc_otg: modified the check condition for max packet size of ep_in in high speed
In current high speed fastboot, fs_ep_in.wMaxPacketSize is configured 64 bytes
as default, as a result, it failed to match the size at initialization stage in
usb controller.
Actually, hardware can support less than or equal to 512 bytes in high speed mode,
so I changed the condition from  '!=' to '>' to fix this issue.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Tested-by: Steve Rae <srae@broadcom.com>
2016-02-04 12:38:26 +01:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
Ye.Li
8991fdef6d usb:ci_udc: Remove ULPI setting for i.MX OTG controller
All the i.MX6, i.MX23 and i.MX28 OTG controllers only support UTMI
interface. Set to ULPI is not correct, even the controller will
reject this setting in PORTSC register.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2016-01-16 07:06:55 +01:00
Ben Whitten
192bc6948b Fix GCC format-security errors and convert sprintfs.
With format-security errors turned on, GCC picks up the use of sprintf with
a format parameter not being a string literal.

Simple uses of sprintf are also converted to use strcpy.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14 22:11:34 -05:00
Stephen Warren
02585eb3b5 ums: support multiple LUNs at once
Extend the ums command to accept a list of block devices. Each of these
will be exported as a separate LUN. An example use-case would be:

ums 0 mmc 0,0.1,0.2

... which would export LUNs for eMMC 0's user data, boot0, and boot1 HW
partitions. This is useful since it allows the host access to everything
on the eMMC without having to somehow stop the ums command from executing
and restart it with different parameters.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:19 -05:00
Marek Vasut
5d5716eebc usb: s3c-otg: Rename usb/s3c_udc.h to usb/dwc2_udc.h
The driver is actually for the Designware DWC2 controller.
This patch renames the global s3c_udc.h header to dwc2_udc.h.

The rename is done automatically:
	$ sed -i "s/s3c_udc\.h/dwc2_udc.h/g" \
		`git grep "s3c_udc\.h" | cut -d : -f 1`

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:41 +01:00
Marek Vasut
a4bb9b3636 usb: s3c-otg: Rename s3c_udc_probe() function
The driver is actually for the Designware DWC2 controller.
This patch is the second and final to rename global symbol,
the s3c_udc_probe() function.

The rename is done automatically:
	$ sed -i "s/s3c_udc_probe/dwc2_udc_probe/g" \
		`git grep s3c_udc_probe | cut -d : -f 1`

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
c0982871df usb: s3c-otg: Rename struct s3c_plat_otg_data
The driver is actually for the Designware DWC2 controller.
This patch is the first to rename global symbol, the struct
s3c_plat_otg_data.

The rename is done automatically:
	$ sed -i "s/s3c_plat_otg_data/dwc2_plat_otg_data/g" \
		`git grep s3c_plat_otg_data | cut -d : -f 1`

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
e30824f439 usb: s3c-otg: Rename USB_GADGET_S3C_UDC_OTG* to USB_GADGET_DWC2_OTG*
The s3c-otg IP block is in fact a DWC2 OTG one, so finally rename the
config option to make it less misleading. No functional change, just
a mechanical change done using the following script:

  git grep USB_GADGET_S3C_UDC_OTG | cut -d : -f 1 | sort -u | \
  while read line ; do
    sed -i "s/USB_GADGET_S3C_UDC_OTG/USB_GADGET_DWC2_OTG/g" $line ;
  done

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
e179cedd09 usb: s3c-otg: Tweak the comments
The driver is actually for the Designware DWC2 controller.
Tweak the comments in the driver to reflect this fact.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
507e677bc4 usb: s3c-otg: Rename remaining macros
The driver is actually for the Designware DWC2 controller.
This patch renames the remaining S3C_* macros to match the
DWC2 naming.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
be5e4bdced usb: s3c-otg: Rename sources to dwc2_*c
The driver is actually for the Designware DWC2 controller.
This patch renames the local source files to dwc2_*c and
adjusts the Makefile to use the new names.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
f4d9bd06f7 usb: s3c-otg: Rename local headers to dwc2_*h
The driver is actually for the Designware DWC2 controller.
This patch renames the local header files to dwc2_*h and
adjusts the sources to use the new names.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
06cb6ccd8e usb: s3c-otg: Change the driver name to dwc2-udc
Just change the driver name.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
193979e2fe usb: s3c-otg: Zap useless externs
The extern statements are useless, remove them. Also remove the
extern ... controller, which is completely useless.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:40 +01:00
Marek Vasut
155e740f73 usb: s3c-otg: Rename remaining local s3c_*() functions
The driver is actually for the Designware DWC2 controller.
This patch renames the remaining local s3c_*() functions
to reflect this.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:39 +01:00
Marek Vasut
f52dd802cc usb: s3c-otg: Rename s3c_udc_*() functions
The driver is actually for the Designware DWC2 controller.
This patch renames the s3c_ep_*() functions to reflect this.
The function s3c_udc_probe() is a special case and is not
renamed by this patch yet.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:39 +01:00
Marek Vasut
ae1f2f0c4a usb: s3c-otg: Rename s3c_ep_*() functions
The driver is actually for the Designware DWC2 controller.
This patch renames the s3c_ep_*() functions to reflect this.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:39 +01:00
Marek Vasut
28b9774808 usb: s3c-otg: Rename s3c_ep0_*() functions
The driver is actually for the Designware DWC2 controller.
This patch renames the s3c_ep0_*() functions to reflect this.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:39 +01:00
Marek Vasut
de578e22d4 usb: s3c-otg: Staticize functions in s3c_udc_otg_xfer_dma.c
Just staticize the functions, they are not used outside of the file.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:39 +01:00
Marek Vasut
2f6560a146 usb: s3c-otg: Staticize s3c_udc_ep_set_stall
This function is local to s3c_udc_otg_xfer_dma.c , staticize it.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:39 +01:00
Marek Vasut
c056c52bbd usb: s3c-otg: Rename struct s3c_request
The driver is actually for the Designware DWC2 controller.
This patch renames struct s3c_request to reflect this.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:39 +01:00
Marek Vasut
627d929826 usb: s3c-otg: Rename struct s3c_ep
The driver is actually for the Designware DWC2 controller.
This patch renames struct s3c_ep to reflect this.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:39 +01:00
Marek Vasut
5f3a562a3b usb: s3c-otg: Rename struct s3c_dev_*_ep
The driver is actually for the Designware DWC2 controller.
This patch renames struct s3c_dev_*_ep to reflect this.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:38 +01:00
Marek Vasut
1f99ab5c92 usb: s3c-otg: Rename struct s3c_usbotg_phy to dwc2_usbotg_phy
The driver is actually for the Designware DWC2 controller.
This patch renames struct s3c_usbotg_phy to struct dwc2_usbotg_phy
to make things more obvious and clear.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-12-17 21:54:38 +01:00