Commit graph

127 commits

Author SHA1 Message Date
Ayan Kumar Halder
41d7f67448 xilinx: Remove the legacy property "#stream-id-cells"
"#stream-id-cells" was being used with "mmu-masters" for Xen specific
device trees.
With Xen commit 2278d2cbb0b7c1b48b298c6c4c6a7de2271ac928 (Link below)
Xen is able to support smmu bindings in both formats ie :
1. Using iommus (linux format)
2. Using mmu-masters (legacy format).

Thus, "#stream-id-cells" which was used for the legacy format, can be
removed as Xen can use smmu bindings in linux format.

Link: https://www.mail-archive.com/xen-devel@lists.xenproject.org/msg101649.html
Signed-off-by: Ayan Kumar Halder <ayankuma@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/1e062acb233dee47cd7dd2429cb482132617cbc8.1655886415.git.michal.simek@amd.com
2022-07-26 08:23:54 +02:00
Michal Simek
d59fac2f3f arm64: zynqmp: Add power domain description for PL
PL has own power domain which is not described in DT. That's why add it
there by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b38e2ea95dab434bc007f9ed6c438c68149744bf.1652262769.git.michal.simek@amd.com
2022-05-18 13:17:54 +02:00
Michal Simek
234f8be568 arm64: zynqmp: Fix opp-table-cpu
OPP table name now should start with "opp-table" and OPP entries
shouldn't contain commas and @ signs in accordance to the new schema
requirement.

The same change was done in Linux by commit c6d4a8977598 ("ARM: tegra:
Rename CPU and EMC OPP table device-tree nodes"), commit ffbe853a3f5a
("ARM: dts: sunxi: Fix OPPs node name") or commit b7072cc5704d ("arm64:
dts: qcom: qcs404: Rename CPU and CPR OPP tables").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a1176349448df35127dbac15c1eeb2229505bae7.1652262769.git.michal.simek@amd.com
2022-05-18 13:17:54 +02:00
Piyush Mehta
a4180c3696 arm64: zynqmp: Add mode-pin GPIO controller DT node
Add mode-pin GPIO controller DT node in zynqmp.dtsi and also setup default
reset-gpios property for usb which is default Xilinx setup.

Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f2a1f6f541c41075ea36062857031bfc28d6d303.1652262769.git.michal.simek@amd.com
2022-05-18 13:17:54 +02:00
Sai Krishna Potthuri
8bd9e2f631 arm64: zynqmp: Add resets property to sdhci nodes
Add "resets" property to sdhci nodes.
resets property is used to reset the SD host controller when
dynamic configuration support is enabled.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f1fe39259c45a37aae56c2835ee8ba187c889d25.1646060367.git.michal.simek@xilinx.com
2022-03-29 09:12:58 +02:00
Shravya Kumbham
d10807a06b arm64: xilinx: dts: Add dma properties to fix dtbs_check warnings
Update dma name and add #dma-cells properties to fix dtbs_check
warnings.

Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/fedbf83fd5c682b4d61905d2cb790d33c2f079d6.1642160644.git.michal.simek@xilinx.com
2022-01-19 11:33:50 +01:00
Manish Narani
1d70cc7789 arm64: zynqmp: Update USB node handle from dwc3 to usb
The DWC3 bindings require all USB node handles to be '^usb@[0-9a-f]+$'.
Update the same in ZynqMP device tree.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/26fc2777eeb92cb5cb1d558d7c19cfb54ac42d0c.1642160613.git.michal.simek@xilinx.com
2022-01-19 11:33:03 +01:00
Michal Simek
59b21d2aea arm64: zynqmp: Change compatible strings for cadence uart
Based on Linux kernel DT binding there should be different compatible
strings used that's why align zynqmp.dtsi with it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/e2404ccd22fd97fe6020be0b3b6eb3c8677f55b0.1642160583.git.michal.simek@xilinx.com
2022-01-19 11:25:54 +01:00
Michal Simek
ca44216941 arm64: zynqmp: Remove clock-names from GEM in zynqmp-clk-ccf.dtsi
Remove clock-names from GEM nodes from clk-ccf because they should be only
present in zynqmp.dtsi. And as is visible both clock-names defined didn't
really match.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/d6045d81b3e7e97df0ba3eeacb9f3f75ed7cff18.1637239345.git.michal.simek@xilinx.com
2022-01-05 10:22:02 +01:00
Michal Simek
87b50f9aea arm64: zynqmp: Add resets to all GEMs
There is a need to get IP out of reset to operate properly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/041362197e8de8e9c696da64429107505bdc0c73.1637239345.git.michal.simek@xilinx.com
2022-01-05 10:22:02 +01:00
Michal Simek
19645a11de arm64: zynqmp: Add u-boot,dm-pre-reloc to dpsub node
u-boot,dm-pre-reloc is necessary for DP driver to allocate enough space for
framebuffer before relocation.
Power domain driver is called when video console is used for example by
loading BMP image.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/5e93acee1746913a6e42741e5e797f0b4ab98d44.1637239230.git.michal.simek@xilinx.com
2022-01-05 10:22:02 +01:00
Michal Simek
cb4380abfd arm64: zynqmp: Update usb dwc3 DT description
Align USB nodes with the latest dt-bindings. It is adding resets, new
interrupt and also some quirks.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:36 +02:00
Michal Simek
d245d0dfd8 arm64: zynqmp: Remove unused property from SD/USB
Linux kernel is not using these properties that's why they can be removed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Srinivas Neeli
ee6b3c54e9 arm64: zynqmp: rtc: Update rtc calibration value
As per the design specification
"The 16-bit Seconds Calibration Value represents the number of
 Oscillator Ticks that are required to measure the largest time
 period that is less than or equal to 1 second.
 For an oscillator that is 32.768 KHz, this value will be 0x7FFF."

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Michal Simek
447fb8db02 arm64: zynqmp: Update Copyright years to 2021
Trivial change for all files I have touched recently.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Michal Simek
eca0376b54 arm64: zynqmp: Add label for zynqmp_ipi
Add label which is used by bootloader for adding bootloader specific flag.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/3dc8416abdd3498e61edcd83830a12af295c5c6d.1611224800.git.michal.simek@xilinx.com
2021-06-23 09:48:35 +02:00
Michal Simek
fee3e307f2 arm64: zynqmp: Add reset description for sata
Sata needs to get reset before configuration that's why add property for it
there.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Stefano Stabellini
ce42bd2fa3 arm64: zynqmp: Add missing SMID for pcie to zynqmp.dtsi
The SMMU is disabled in device tree so this change has no impact.
The benefit is that this way it is in sync with xen.dtsi. Xen enables
the SMMU and makes use of it.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
2021-06-23 09:48:35 +02:00
Michal Simek
d9be8b4f2f arm64: zynqmp: Disable CCI by default
There is no reason to have CCI no enabled by default. Enable it when your
system configuration requires it. In Xilinx configuration flow this is
work for Device Tree Generator which reads information from HW Design
configuration.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23 09:48:35 +02:00
Michal Simek
ce90654d1c xilinx: Sync DTs with Linux kernel
There are several changes which happen in mainline kernel which should get
also to U-Boot. Here is the list of patches from the kernel:

- ARM: zynq: Fix leds subnode name for zc702/zybo-z7
- arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
- arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
- arm64: dts: zynqmp: Wire up the DisplayPort subsystem
- arm64: dts: zynqmp: Add DisplayPort subsystem
- arm64: dts: zynqmp: Add DPDMA node
- arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
- arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
- arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
- arm64: dts: zynqmp-zcu100-revC: correct interrupt flags
- arm64: dts: xilinx: align GPIO hog names with dtschema
- arm64: zynqmp: Add Xilinx AES node
- dt: bindings: dma: xilinx: dpdma: DT bindings for Xilinx DPDMA

but also some other changes have been done.
- Using only one compatible string for adxl345 on zturn
- Remove Xilinx internal DP bindings
- Remove USB3.0 serdes configurations
- Remove SATA serdes configuration for zc1232
- Resort nvmem_firmware
- Update nand compatible string
- Aling power-domains property for sd0/1

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Amit Kumar Mahapatra
e2b71c382f arm64: zynqmp: Rename clocks as per the Arasan NAND driver
In zynqmp.dtsi file renamed "clk_sys" clock to "controller" and
"clk_flash" clock to "bus" as per upstreamed Arasan NAND driver.
This fixes NAND driver probe failure.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Michal Simek
2d381d2fe2 arm64: zynqmp: Sync DT with Linux kernel
All changes are recorded in lore.kernel.org. Here are links to that patches
for the record.
Link: https://lore.kernel.org/r/f59a63d8cb941592de6d2dee8afa6f120b2e40c8.1601379794.git.michal.simek@xilinx.com
Link: https://lore.kernel.org/r/68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com
Link: https://lore.kernel.org/r/f767fe007e446a2299fda9905e75b723c650a424.1605021644.git.michal.simek@xilinx.com
Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com
Link: https://lore.kernel.org/r/20200629081744.13916-1-krzk@kernel.org

And there are other minor changes (just moving things around).

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04 10:51:27 +01:00
Michal Simek
00fb945cf5 arm64: zynqmp: Move pinctrl node under firmware node
Pinctrl is handled via firmare interface that's why move it there without
reg property and new compatible string.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
ba19690287 arm64: zynqmp: Fix GIC compatible property
dtbs_check is showing warning around GIC compatible property as
interrupt-controller@f9010000: compatible: ['arm,gic-400', 'arm,cortex-a15-gic']
is not valid under any of the given schemas

Similar change has been done also by Linux kernel commit 5400cdc1410b
("ARM: dts: sunxi: Fix GIC compatible")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
04437dea7c arm64: zynqmp: Sync DP subsystem
Sync DP subsystem with the latest state in Xilinx U-Boot repository.
This binding hasn't been approved in mainline Linux but it is much better
than ancient version which this patch removes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Ashok Reddy Soma
d9872d8b47 arm64: dts: zynqmp: Add clk cells for sdhci
Add clock-cells and clock-output-names for sdhci0 and sdhci1.
These are needed for linux sdhci driver from 5.4 version onwards.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
87b0176fbf arm64: zynqmp: Remove second copy of reset-controller
Reset controller is handled via firmware that's why it should be the part
of firmware node. Origin solution hasn't been removed when above change was
applied by commit b07e97b4ba ("arm64: zynqmp: Use reset header in
zynqmp.dtsi").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Nava kishore Manne
21620990cf arm64: zynqmp: Sync zynqmp fpga manager with mainline
Sync zynqmp fpga manager with mainline.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
d31f1c9236 arm64: zynqmp: Update Copyright years to 2020
Trivial change.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
b94a3c2ebe arm64: zynqmp: Sync gpio-controller name location
Sync location with mainline kernel.
Added by Linux kernel commit 75926f07baae
("arm64: dts: zynqmp: Add missing gpio-controller to ps gpio").

Fixes: 0b33e0b156 ("arm64: zynqmp: Add missing gpio property to dtsi")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Michal Simek
096d7f5b3e arm64: dts: zynqmp: Fix node names which contain "_"
s/_/-/ for node names.

It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...

Issues reported by make dtbs W=12

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Rob Herring
8e3501ec90 arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string
The 'arm,armv8' compatible string is only for software models. It adds
little value otherwise and is inconsistently used as a fallback on some
platforms. Remove it from those platforms.

This fixes warnings generated by the DT schema.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-14 09:05:55 +01:00
Michal Simek
2038e46f48 arm64: zynqmp: List lpd watchdog in dtsi
There are use cases where lpd watchdog can be configured for APU use. By
design this IP should be listed in zynqmp.dtsi to make sure that node is
properly enabled by DTG.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
332996ce18 arm64: zynqmp: Use power header in zynqmp.dtsi
Use power header and add power-domains property.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
b07e97b4ba arm64: zynqmp: Use reset header in zynqmp.dtsi
Wire reset-controller and use macros from reset header.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
dead6f67c7 arm64: zynqmp: Use backward compatible string for gem
Add backward compatible string for gem ("cdns,gem").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
039c740d66 arm64: zynqmp: Switch to xlnx-zynqmp-clk header
Use prepared header instead of hardcoded values.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Naga Sureshkumar Relli
c3a34b8006 arm64: zynqmp: Update nand device tree node properties
This patch updates the nand device tree node properties as per
updated driver.

Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
631ed92a30 arm64: zynqmp: Fix DT style for ipi mailbox
Remove additional empty space.

Fixes: 95497afada ("arm64: zynqmp: add firmware and mailbox node to DT")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Ibai Erkiaga
95497afada arm64: zynqmp: add firmware and mailbox node to DT
The following patch adds a mailbox node and firmware node to following the
mainline DT.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Amit Kucheria
9a06ed88f4 arm64: dts: Fix various entry-method properties to reflect documentation
The idle-states binding documentation[1] mentions that the
'entry-method' property is required on 64-bit platforms and must be
set to "psci".

Linux commit a13f18f59d26 ("Documentation: arm: Fix typo in the idle-states
bindings examples") attempted to fix this earlier but clearly more is
needed.

Linux docs:
Documentation/devicetree/bindings/arm/idle-states.txt (see
idle-states node)

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Mounika Grace Akula
3c8ee337eb arm64: zynqmp: Add reset-on-timeout for all boards and modify default timeout value
This patch adds reset-on-timeout to FPD WDT which will trigger an
interrupt to PMU when watchdog expiry happens and PMU takes the
necessary action. If this property is not enabled, reason will not be
known when watchdog expiry happens.
This patch also modifies the default timeout to 60 seconds. Reason is
that if u-boot enables WDT, it will set the timeout to 10 seconds and
this is not enough to boot till Linux and start the WDT application in
Linux. 60 seconds is the maximum safest value to boot till Linux and
start the WDT application.

Users need to change this timeout value to fit their needs.

Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-15 15:04:01 +01:00
Siva Durga Prasad Paladugu
e7c9de6617 arm64: zynqmp: Fix mmc node names to be in sync with kernel
This patches renames sd nodes in dts to be in line with
kernel. This patch also modifies the references for the same
in code.
It checks mmc first to have no time penalty for new DT node names based
on left-to-right expression evaluation.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-24 10:03:42 +01:00
Michal Simek
aedd54739f arm64: zynqmp: Remove power domain description
This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-04-09 12:14:52 +02:00
Michal Simek
18a952ce7f arm64: zynqmp: Sync up license with mainline kernel
Mainline Linux kernel has adopted SPDX header license in a different
format then was used before. This patch is syncing it up.

Also update years in License text and remove Nathalie's email because it
is no longer valid.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
680e9976c9 arm64: zynqmp: Sync alignment with mainline
Sync pcie and lpd_dma nodes with mainline version.
Incorrect locations are causing diff in statistics that's why
synchronizations are needed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
24124abe06 arm64: zynqmp: Add support for generic QSPI boot
This patch is enabling support for SPL QSPI boot.

First of all it is necessary to generate atf-spi.ub which is different
format than atf-uboot.ub (this can be made as legacy image too)

ADDR=`arm-xilinx-linux-gnueabi-readelf -a bl31.elf | grep "Entry point
address" | cut -d ':' -f 2 | sed -e 's/^[ \t]*//'`
aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin
./tools/mkimage -f auto -A arm64 -T firmware -C none -O u-boot -a $ADDR
-e $ADDR -n "atf1" -E -b arch/arm/dts/zynqmp-zcu102.dtb -d bl31.bin
atf-uboot.ub
./tools/mkimage -A arm64 -T firmware -C none -O u-boot -a $ADDR -e $ADDR
-n "atf-for-qspi" -E -d bl31.bin atf-spi.ub

This patch is using this QSPI layout with offsets:
0 boot.bin
512k atf-ub
640k u-boot.bin
1280k u-boot.img

Which corresponding by writing these images(read from MMC)
mmcinfo
sf probe
load mmc 0 10000000 boot.bin
sf erase 0 +$filesize
sf write 10000000 0 $filesize
load mmc 0 10000000 atf-spi.ub
sf erase 0x80000 +$filesize
sf write 10000000 0x80000 $filesize
load mmc 0 10000000 u-boot.bin
sf erase 0xa0000 +$filesize
sf write 10000000 0xa0000 $filesize
load mmc 0 10000000 u-boot.img
sf erase 0x140000 +$filesize
sf write 10000000 0x140000 $filesize

For testing u-boot running in EL3 you can break atf-spi.ub like this:
sf probe
sf erase 0x80000 +4

Then u-boot.img is executed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:21 +01:00
Michal Simek
8a705a2d4d arm64: zynqmp: Add reference to pmu firmware node
This reference is needed for pinctrl driver where some signals can be
routed directly to platform management unit (PMU).

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:21 +01:00
Anurag Kumar Vulisha
8861dcf2b9 arm64: zynqmp: usb: Correct IOMMU node for making SMMU work with USB
This patch makes SMMU work by moving the iommus node under the dwc3 child
entry from parent node.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:16 +01:00
Michal Simek
a41bd46c2a arm64: zynqmp: Remove clock setting from dtsi
clock setting is handled via clk dtsi file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:09:16 +01:00