Commit graph

1125 commits

Author SHA1 Message Date
Bin Meng
3fe6e6e2aa x86: baytrail: acpi: Add full reset bit to the reset register value in FADT
It was noticed a few times, that the reboot from Linux (reboot command)
is different from the reboot (reset command) under U-Boot. The U-Boot
version does seem to reset the board more deeply (PCI cards etc) than
the Linux reboot.

This is actually caused by missing full reset bit in the reset register
value in the ACPI FADT table.

Reported-by: Stefan Roese <sr@denx.de>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
2017-09-02 23:35:55 +08:00
Bin Meng
438505fe69 x86: tangier: kconfig: Guard tangier-specific options
These options should not be exposed to other platforms.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-24 11:00:47 +08:00
Bin Meng
81c727d86c x86: baytrail: Fix turbo enable
CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED must be turned on for Baytrail.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-24 11:00:47 +08:00
Bin Meng
2ddb1a177a x86: Convert CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED to Kconfig
This converts CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED to a Kconfig option.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-24 11:00:47 +08:00
Bin Meng
1e6ebee667 x86: fsp: Configure SPI opcode registers before SPI is locked down
Some Intel FSP (like Braswell) does SPI lock-down during the call
to fsp_notify(INIT_PHASE_BOOT). But before SPI lock-down is done,
it's bootloader's responsibility to configure the SPI controller's
opcode registers properly otherwise SPI controller driver doesn't
know how to communicate with the SPI flash device.

This introduces a Kconfig option CONFIG_FSP_LOCKDOWN_SPI for such
FSPs. When it is on, U-Boot will configure the SPI opcode registers
before the lock-down.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-08-24 11:00:47 +08:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
Simon Glass
c1c3fe2307 env: Convert CONFIG_ENV_IS_IN... to a choice
At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
size of the environment area are global (i.e. apply to all locations).

Until these limitations are removed we cannot really support more than one
environment location. Adjust the location to be a choice so that only one
can be selected. By default the environment is 'nowhere', meaning that the
environment exists only in memory and cannot be saved.

Also expand the help for the 'nowhere' option and move it to the top since
it is the default.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Move all of the imply logic to default X if Y so it works again]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:01 -04:00
Bin Meng
323a6d6910 x86: acpi: Fix build error with certain configuration
When CONFIG_EFI_PARTITION is not set, the following build error is
seen in arch/x86/lib/acpi_s3.c:

  error: expected declaration specifiers or '...' before '*' token
  static void asmlinkage (*acpi_do_wakeup)(void *vector) = (void*)WAKEUP_BASE;

This is actually caused by missing asmlinkage declaration, but with
CONFIG_EFI_PARTITION on, the declaration comes from part.h which
is included from common.h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-08-08 21:13:05 +08:00
Bin Meng
091e51d20f x86: Remove dead ISA related codes
Neither new design uses ISA bus, nor does any U-Boot codes use these
codes. Remove them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-08 16:46:32 +08:00
Tom Rini
07d7783822 Merge git://git.denx.de/u-boot-x86 2017-08-01 15:38:32 -04:00
Bin Meng
24357dfd2a x86: Switch all boards to use DM SCSI
After MMC is converted to DM, convert to use DM SCSI as well for all
x86 boards and imply BLK for both MMC and SCSI drivers.

CONFIG_SCSI_DEV_LIST is no longer used. Clean them up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Simon Glass
b7c6baef28 x86: Convert MMC to driver model
Convert the pci_mmc driver over to driver model and migrate all x86 boards
that use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: remove DM_MMC from edison_defconfig]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-01 20:17:02 +08:00
xypron.glpk@gmx.de
6461f45b71 x86: ivybridge: remove unused uma_memory_size
The value of uma_memory_size depends on an undefined value
from the stack. The value of uma_memory_size is changed but
never used.

So simply remove this superfluous code.

The problem was indicated by cppcheck.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
724368928c x86: Convert INTEL_ICH6_GPIO to Kconfig
This converts Intel ICH6 GPIO driver to Kconfig, and add it to the
imply list of platform drivers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
b9342b2cc6 x86: kconfig: Move USB to platform Kconfig
Like other peripheral drivers, move USB related drivers to platform
Kconfig as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
97e12b06af x86: qemu: kconfig: Imply platform specific drivers
Imply Qemu-specific drivers in the platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
b0e3adf669 x86: quark: kconfig: Imply platform specific drivers
Imply Quark-specific drivers in the platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
71305b4478 x86: tangier: kconfig: Imply platform specific drivers
Imply Tangier-specific drivers in the platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
a65ae28618 x86: queensbay: kconfig: Imply platform specific drivers
Imply drivers that work with Intel Queensbay platform.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
08fb85b2a4 x86: coreboot: kconfig: Imply drivers that are useful
U-Boot as coreboot payload can run on any x86 hardware ideally.
Let's imply some common drivers that are useful.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
1b15ef9cd2 x86: broadwell: kconfig: Imply platform specific drivers
Imply Broadwell-specific drivers in the platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
a5b212942b x86: ivybridge: kconfig: Imply platform specific drivers
Imply drivers that are working with Ivybridge platform in the
platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
e88e1ef550 x86: baytrail: kconfig: Imply platform specific drivers
BayTrail integrates lots of peripherals that have U-Boot drivers.
Imply those in the platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
67f99f970f x86: kconfig: Imply ENABLE_MRC_CACHE in the platform Kconfig
Platform knows whether MRC cache is implemented, but using it can
be a choice of a specific board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
5d89b37f71 x86: kconfig: Select ARCH_EARLY_INIT_R in the platform Kconfig
This is architecture-dependent early initialization hence should
be put in the platform Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
3612b1efeb x86: kconfig: Select ARCH_MISC_INIT in the platform Kconfig
arch_misc_init() is intended to do architecture-dependent stuff.
This is required by each platform.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
30b1ecd265 x86: kconfig: Let board select BOARD_EARLY_INIT_F
CONFIG_BOARD_EARLY_INIT_F literally indicates board-specific codes
and should be not 'default y' for all x86 boards.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
1e452b4686 x86: kconfig: Imply HAVE_INTEL_ME in the platform Kconfig
Intel Management Engine is required by the platform, however it's
not a must have when building a U-Boot image. For example, during
development normally programming ME firmware is a one-time effort.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Andy Shevchenko
c3df28f6e2 x86: Make table address selectable
Some firmwares might have another window for generated tables.

So, introduce two configuration options to select start address and
maximum length for the generated tables.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-01 20:17:02 +08:00
Bin Meng
e719b6b0f8 x86: Enforce toolchain to generate 64-bit codes for 64-bit U-Boot
64-bit U-Boot image is a combination of 32-bit U-Boot (SPL) plus
64-bit U-Boot (proper). For the U-Boot proper, it has be compiled
to 64-bit object codes. Attempting to use a toolchain to compile
64-bit U-Boot for qemu-x86_64, like kernel.org 4.9 i386-linux-gcc,
fails with the following errors:

  arch/x86/cpu/intel_common/microcode.c:79:2: error: PIC register
  clobbered by 'ebx' in 'asm'

The issue is because toolchain is preconfigured to generate code
for the 32-bit architecture (i386), and currently '-m64' is missing
in the makefile fragment. Using kernel.org 4.9 x86_64-linux-gcc
works out of the box, since it is preconfigured to generate 64-bit
codes.

When compiling U-Boot SPL, '-m32' is passed to the toolchain, no
mater 32-bit (i386-linux-) or 64-bit (x86_64-linux) the toolchain
is preconfigured to generate.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Bin Meng
9a95f51ffe x86: Use default stack boundary alignment
At present U-Boot x86 build is using -mpreferred-stack-boundary=2
which is 4 bytes stack boundary alignment. With 64-bit U-Boot, the
minimal required stack boundary alignment is 16 bytes.

If -mpreferred-stack-boundary is not specified, the default is 4
(16 bytes). Switch to use the default one.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01 20:17:02 +08:00
Simon Glass
745a94f352 ahci: Support non-PCI controllers
At present the AHCI SCSI driver only supports PCI with driver model.
Rename the existing function to indicate this and add support for adding
a non-PCI controller .

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-01 11:58:00 +09:00
Andy Shevchenko
382fabb297 x86: acpi: Don't touch hardware on HW reduced platforms
If ACPI HW reduced bit in FADT is set we should ignore any ACPI hardware
communications.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Andy Shevchenko
ace7762b28 x86: acpi: Export acpi_fill_mcfg() with __weak attribute
Some platforms might require different approach when filling memory
mappings configuration table.

Allow them to override the common method.

At the same time export acpi_create_mcfg_mmconfig().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Andy Shevchenko
b156da91fb x86: acpi: Deduplicate acpi_fill_madt() implementation
In Baytrail and Quark support code acpi_fill_madt() is identical.

Deduplicate its implementation by moving to lib/acpi_tables.c.

At the same time mark acpi_fill_madt() with __weak attribute to keep a
possibility to override it in platform code

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Andy Shevchenko
2dcbef6f6c x86: acpi: Name fields in FADT in accordance with specification
ACPI specification defines FADT fields marked as reserved in U-Boot.

Name these fields in accordance with ACPI specification.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Andy Shevchenko
684c4cd011 x86: acpi: Fill OEM revision
Fill OEM revision field in the tables by U-Boot build date.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Stefan Roese
66712c298d x86: conga-qeval20-qa3-e3845.dts: Enable xHCI support in dts
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Stefan Roese
1f4e25780a x86: dfi-bt700: Add xHCI USB support
Change from EHCI to xHCI on the DFI BayTrail SoM.

The xHCI USB hub is connected to an GPIO on the DFI BayTrail SoM. For
correct operation, it needs to get reset upon power-up. Otherwise it
may happen that the hub is not detected after a software reboot. This
patch also configures this GPIO in the dts for correct operation.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Andy Shevchenko
495f3774be x86: Add Intel Edison board files
Add Intel Edison board which is using U-Boot.

The patch is based on work done by the following people (in alphabetical
order):
	Aiden Park <aiden.park@intel.com>
	Dukjoon Jeon <dukjoon.jeon@intel.com>
	eric.park <eric.park@intel.com>
	Fabien Chereau <fabien.chereau@intel.com>
	Felipe Balbi <felipe.balbi@linux.intel.com>
	Scott D Phillips <scott.d.phillips@intel.com>
	Sebastien Colleur <sebastienx.colleur@intel.com>
	Steve Sakoman <steve.sakoman@intel.com>
	Vincent Tinelli <vincent.tinelli@intel.com>

In case we're building for Intel Edison, we must have 4096 bytes of
zeroes in the beginning on u-boot.bin. This is done in
board/intel/edison/config.mk.

First run sets hardware_id environment variable which is read from
System Controller Unit (SCU).

Serial number (serial# environment variable) is generated based on eMMC
CID.

MAC address on USB network interface is unique to the board but kept the
same all over the time.

Set mac address from U-Boot using following scheme:
	OUI = 02:00:86
	next 3 bytes of MAC address set from eMMC serial number

This allows to have a unique mac address across reboot and flashing.

Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[bmeng: Add MAINTAINERS file for Intel Edison board]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00
Felipe Balbi
e71de54a49 x86: Add Intel Tangier support
Add Intel Tangier SoC support.

Intel Tangier SoC is a core part of Intel Merrifield platform. For
example, Intel Edison board is based on such platform.

The patch is based on work done by the following people (in alphabetical
order):
	Aiden Park <aiden.park@intel.com>
	Dukjoon Jeon <dukjoon.jeon@intel.com>
	eric.park <eric.park@intel.com>
	Fabien Chereau <fabien.chereau@intel.com>
	Scott D Phillips <scott.d.phillips@intel.com>
	Sebastien Colleur <sebastienx.colleur@intel.com>
	Steve Sakoman <steve.sakoman@intel.com>
	Vincent Tinelli <vincent.tinelli@intel.com>

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-30 10:30:25 +08:00
Andy Shevchenko
b7026b0c98 x86: Add dma-mapping.h to architectural code
Some cross-platform drivers rely on this header present.
Make it so for x86.

It's just a copy'n'paste of arch/arm/include/asm/dma-mapping.h.

Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-30 10:30:25 +08:00
Bin Meng
c9621012a6 x86: minnowmax: Enable USB xHCI support
BayTrail SoC supports both EHCI and xHCI controllers. However only
one host controller (either EHCI or xHCI) can be used. To enable
HSIC and SS ports, xHCI must be used. This turns on xHCI support on
Intel MinnowMax board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2017-07-28 23:34:27 +02:00
Simon Glass
91c868fe7c Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_SPI_FLASH

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-25 21:31:03 -04:00
Simon Glass
32e9ec1f88 x86: Move link to use driver model for SCSI
As a demonstration of how to use SCSI with driver model, move link over
to use this. This patch needs more work, but illustrates the concept.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11 10:08:19 -06:00
Bin Meng
da2364cc14 Revert "x86: Convert MMC to driver model"
This reverts commit ddb3ac3c71.

With MMC converted to driver model, SCSI driver is broken due to
zero address access at (ops->read) in block_dread() function.

The fix (SCSI driver converted to DM) is ready in u-boot-dm branch,
but it is too late for this relese to get that in.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-27 16:31:30 +08:00
Simon Glass
3ff240c92f x86: Don't include asm/u-boot.h in common
With a small fixup to u-boot-x86.h, this is not actually needed anywhere,
so drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:35 -04:00
Simon Glass
6862b50f6e x86: Make u-boot-x86.h a private header
Rather than including this arch-specific header file in common.h, include
it from within x86's u-boot.h header.

Also drop the comment about something to be fixed. It is not clear what
needs fixing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05 11:02:32 -04:00
Bin Meng
d7f7ba36b2 x86: fsp: Remove the call to set up internal uart in fsp_init()
First of all, it's inappropriate to call setup_internal_uart() in a
generic API fsp_init(), as CONFIG_INTERNAL_UART is an option that
is only available on BayTrail platform. Secondly even for BayTrail,
there is no need to call setup_internal_uart() at all, as Intel FSP
will do this for us.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 08:55:22 +08:00
Bin Meng
37d1023264 x86: baytrail: Fix boot hang with a debug build
It was observed that when -DDEBUG is used to generate a debug build,
U-Boot does not boot on MinnowMax board. A workaround is to disable
CONFIG_DEBUG_UART. The real issue is that in order to have the debug
uart to work, BayTrail SoC needs to be configured so that its internal
uart is available to be used as the debug uart.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05 08:55:22 +08:00