Commit graph

528 commits

Author SHA1 Message Date
Jim Lin
312693c3dd tegra: nand: Add Tegra NAND driver
A device tree is used to configure the NAND, including memory
timings and block/pages sizes.

If this node is not present or is disabled, then NAND will not
be initialized.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-09-07 13:54:31 -07:00
Simon Glass
b572595ee9 nand: Try to align the default buffers
The NAND layer needs to use cache-aligned buffers by default. Towards this
goal. align the default buffers and their members according to the minimum
DMA alignment defined for the architecture.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Scott Wood <scottwood@freescale.com>
2012-09-07 13:54:30 -07:00
Wu, Josh
bdfd59aa0f at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
The Programmable Multibit ECC (PMECC) controller is a programmable binary
BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. This controller
can be used to support both SLC and MLC NAND Flash devices. It supports to
generate ECC to correct 2, 4, 8, 12 or 24 bits of error per sector of data.

To use PMECC in this driver, the user needs to set the PMECC correction
capability, the sector size and ROM lookup table offsets in board config file.

This driver is ported from Linux kernel atmel_nand PMECC patch. The main difference
is in this version it uses registers structure access hardware instead of using macros.
It is tested in 9x5 serial boards.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[rebase]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-01 17:06:14 +02:00
Wu, Josh
ae79794e54 at91: atmel_nand: remove unused variables.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-01 17:06:14 +02:00
Wu, Josh
fe2185ea80 at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().
This patch
1. extract the hwecc initialization code into one function. It is a preparation for adding atmel PMECC support.
2. enable CONFIG_SYS_NAND_SELF_INIT. Which make us can configurate the ecc parameters between nand_scan_ident() and nand_scan_tail().

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[fix empty newline at EOF error and move return value check into ifdef]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-01 17:06:14 +02:00
Otavio Salvador
fa7a51cb82 mxs: Convert sys_proto.h prefixes to 'mxs'
The sys_proto.h functions (except the boot modes) are compatible with
i.MX233 and i.MX28 so we use 'mxs' prefix for its methods.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01 14:58:25 +02:00
Jeroen Hofstee
d43950463c arm: omap: Fix switching back to nandecc sw.
Orjan Friberg wrote at [1]:

"For the beagleboard, ecc.size is not explicitly set when doing 'nandecc
sw'. If it's not set for the NAND_ECC_SOFT case in nand_scan_tail, it's
set to 256 bytes.

When doing 'nandecc hw', ecc.size is set to 512 bytes. Hence, when
changing back to 'nandecc sw' ecc.size remains at 512 bytes and suddenly
the format has changed."

No patch has been submitted and the issue was still present. This patch
adds the mentioned solution. Tested on a tam3517 board.

[1] http://lists.denx.de/pipermail/u-boot/2012-February/119002.html

cc: Orjan Friberg <of@flatfrog.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
2012-09-01 14:58:19 +02:00
Otavio Salvador
9c471142bc mxs: prefix register structs with 'mxs' prefix
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01 14:58:17 +02:00
Wolfgang Denk
c51261e8db Merge branch 'sf' of git://git.denx.de/u-boot-blackfin
* 'sf' of git://git.denx.de/u-boot-blackfin:
  sf: spansion: Add support for S25FL256S
  sf: winbond: fix page_size
  sf: stmicro: add support for N25Q128A
  sf: stmicro: add support N25Q128 parts
  sf: stmicro: support JEDEC standard two-byte signature
  sf: winbond: add W25Q32
  cmd_spi: remove superfluous semicolon

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-01 12:22:31 +02:00
Michal Simek
4a4cb4e111 sf: spansion: Add support for S25FL256S
Add support for Spansion S25FL256S SPI flash.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-14 11:45:50 -04:00
Stephen Warren
c75942c7b7 sf: winbond: fix page_size
Commit a4ed3b6 "sf: inline data constants" modified winbond.c's page_size
from 256 to 4096. This prevents either/both of "sf write" writing the
correct data, or "sf read" from reading the correct data back.

This allows U-Boot running on Compulab Tegra to upgrade itself.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-14 11:34:30 -04:00
Holger Brunck
81316a902a mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs
commit 54652991
Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips

fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads
to problems for smaller versions of this chip e.g. the 32Mbit version
with deviceid 0x16 on mgcoge. So move the code for this work around to
an own function and check previously manufacturer id and device id to
not break other flashes which don't need this work around.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Stefan Roese <sr@denx.de>
cc: Philippe De Muyter <phdm@macqel.be>
cc: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-08-13 14:34:44 +02:00
Anatolij Gustschin
66863b0538 cfi_flash: add support for Spansion flash PPB sector protection
Erasing flash sectors protected with persistent protection bit (PPB)
mechanism on Spansion flash chips doesn't work. Add sector protection
status checking and sector lock and unlock commands to fix this.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-08-13 14:34:35 +02:00
Michal Simek
d945ce9704 sf: stmicro: add support for N25Q128A
Add support for Numonyx N25Q128A SPI flash.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-10 11:31:04 -04:00
Stephan Linz
6ad6c6dc1e sf: stmicro: add support N25Q128 parts
Adds support for Numonyx's N25Q128 SPI flash. These devices
are used on (among others) Avnet Spartan-6 LX9 micro-evaluation
boards. Tested with "sf" commands and CONFIG_ENV_IS_IN_SPI_FLASH.

Signed-off-by: Stephan Linz <linz@li-pro.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-09 20:41:54 -04:00
Stephan Linz
63ff6a66ae sf: stmicro: support JEDEC standard two-byte signature
There are more than the M25Pxx serial flashs that can be
used with the stmicro driver, for example: the M25PXxx or
N25Qxx serie. All these chips have burned in the original
stmicro manufacture id 0x20 together with a standard
two-byte signature.

In preperation to support all these chips the stmicro driver
have to decode the full two-byte signature.

Signed-off-by: Stephan Linz <linz@li-pro.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-09 20:41:54 -04:00
Rajeshwari Shinde
c969abc470 sf: winbond: add W25Q32
SMDK EVT1  has a different Winbond part, added its part details
to the SPI flash table.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-09 20:41:54 -04:00
Jérôme Carretero
b54d1f26ff sf: stmicro: add geometrical info for N25Q256 from Micron
Note: because 4-byte addressing is not supported yet,
at the moment only the first 16MiB of the device are available.

Signed-off-by: Jérôme Carretero <cJ@zougloub.eu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-08 10:55:55 +00:00
Mike Frysinger
41e1713425 sf: unify status register writing (and thus block unlocking)
The only two drivers to write the status register do it in the same
way, so unify the implementations.  This also makes the block unlock
logic the same.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:18:17 -05:00
Mike Frysinger
7a6d2a7ec1 sf: sst: inline duplicate write enable helper funcs
The local sst enable/disable write funcs don't really add anything
over the common API, so just inline the common calls directly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:12:23 -05:00
Mike Frysinger
04a3e90eaf sf: eon: drop duplicate id
Looks like Shaohui Xie's patch got merged twice.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:08:37 -05:00
Mike Frysinger
c4e932ce73 sf: unify erase commands
Analysis of the flash drivers shows that they all use 0x20 if the erase
size is 4KiB, or 0xd8 if it's larger.  So with this info in hand, we can
unify all the erase functionality in one place.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 22:35:50 -05:00
Mike Frysinger
a4ed3b6531 sf: inline data constants
I imagine much of these constants are due to copy & pasting previous
drivers rather than an actual reflection of the hardware layout.  At
any rate, inline the info that we don't care about externally as it
shrinks things nicely.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 22:56:52 -05:00
Mike Frysinger
7d72b80a90 sf: spansion: inline useless id defines
No need for dedicated defines when these really only get used once.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-20 00:41:36 -04:00
Mike Frysinger
b4c87d658c sf: drop unused/duplicate command defines
In an effort to unify the spi flash drivers further, drop all the
unused and/or duplicate command defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-20 00:41:36 -04:00
Stefan Roese
185b3b76a6 MTD: SPEAr SMI: Add write support for length < 4 bytes
Needed for redundant environment for example.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Amit Virdi <amit.virdi@st.com>
Cc: Vipin Kumar <vipin.kumar@st.com>
2012-07-07 14:07:44 +02:00
Armando Visconti
9264077635 st_smi: Fixed page size for Winbond W25Q128FV flash
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:39 +02:00
Amit Virdi
b5992fac88 st_smi: Change timeout loop implementation
There are two problems in the current timeout loop implementation:
1. In case initial test failing, there will always be a delay of 1 ms
2. The delay duration is not tunable

The new implementation addresses both these limitations.

Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:39 +02:00
Armando Visconti
cf9026deb8 st_smi: Fix bug in flash_print_info()
If the flash size was smaller than 1MB then flash_print_info()
was erroneously reporting 0 MB.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:39 +02:00
Armando Visconti
6d6d23c143 st_smi: Change the flash probing method
THis patch introduces a new methodology for flash probing
in which flash_devices[] table, looked-up thru the dev_id, is
used to locate the flash geometry and information.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:39 +02:00
Armando Visconti
ae3e0cc924 st_smi: Removed no needed dependency on ST_M25Pxx_ID
Since the smi erase code is very generic and works for any kind
of flash, there is no need to test for ST_M25Pxx_ID flash types
like m25p40 flashes).

Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:39 +02:00
Vipin Kumar
a5ad7ccd74 st_smi: Fix smi read status
smi_read_sr fails sometimes because of TFF not getting set within assumed time.
This condition may arise because of, for example, smi memory being in a erase
mode.

This fix is to enable reading the status register until timeout.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:39 +02:00
Shiraz Hashim
a59c7b37b9 st_smi: Move status register read before modifying ctrl register
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:39 +02:00
Vipin KUMAR
0befe7d7a3 st_smi: Read status until timeout happens
SMI driver read status fails because the control register could not be
overwritten. Instead, the read status should be tried until timeout.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:38 +02:00
Amit Virdi
69fcb55f71 st_smi: Enhance the error handling
This commit does the following:
 - Reports error if SNOR flash is not found on the board
 - Changes smi_read_sr to return error using which a retry mechanism is
   implemented for reading flash status

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:38 +02:00
Amit Virdi
5c16c54124 st_smi: Return error in case TFF is not set
Curently the code makes wrong assumption that the Transfer finished flag shall
be set within the stipulated time. However, there may occur a scenario in which
the TFF flag is not set. Return error in that case.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:38 +02:00
Vipin KUMAR
f3fcf92d59 st_smi: Add support for SPEAr SMI driver
SMI is the serial memory interface controller provided by ST.

Earlier, a driver exists in the u-boot source code for the SMI IP. However, it
was specific to spear platforms. This commit converts the same driver to a more
generic driver. As a result, the driver files are renamed to st_smi.c and
st_smi.h and moved into drivers/mtd folder for reusability by other platforms
using smi controller peripheral.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:38 +02:00
Vipin KUMAR
0def98e7be mtd/NAND: Remove obsolete SPEAr specific NAND drivers
Since, SPEAr platform uses generic FSMC driver now, so spear specific files
drivers/mtd/nand/spr_nand.c, arch/arm/include/asm/arch-spear/spr_nand.h are
removed

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Scott Wood <scottwood@freescale.com>
2012-07-07 14:07:38 +02:00
Vipin KUMAR
7f0730a02e mtd/NAND: Add FSMC driver support
Flexible static memory controller is a peripheral provided by ST,
which controls the access to NAND chips along with many other
memory device chips eg NOR, SRAM.

This patch adds the driver support for FSMC controller interfacing
with NAND memory.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Scott Wood <scottwood@freescale.com>
2012-07-07 14:07:38 +02:00
Stephen Warren
1edaf094dc sf: winbond: Add support for the Winbond W25Q80BL
This chip is present on the Compulab TrimSlice.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-07-07 14:07:20 +02:00
Wolfgang Denk
8fa3d2b816 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
* 'master' of git://git.denx.de/u-boot-nand-flash:
  NAND: Remove ONFI detection message to from bootup log
  driver/mtd:IFC: Fix possible memory leak
  driver/mtd: IFC NAND: Add support of ONFI NAND flash
  mtd, nand: move some printfs to debug output.
  nand_util: correct YAFFS image write function
  powerpc/85xx: fix NAND boot linker scripts for -fpic
  nand: extend .raw accesses to work on multiple pages
2012-05-20 22:47:40 +02:00
Stefan Roese
e52fee9b04 NAND: Remove ONFI detection message to from bootup log
Without this patch, boot shows this messages upon NAND detection:

NAND:  ONFI flash detected
ONFI param page 0 valid
ONFI flash detected
ONFI param page 0 valid
128 MiB

With this patch, its back to the U-Boot "standard":

NAND:  128 MiB

Tested on x600 (SPEAr600).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Amit Virdi <amit.virdi@st.com>
Cc: Vipin Kumar <vipin.kumar@st.com>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Scott Wood <scott@tyr.buserror.net>
2012-05-18 18:17:06 -05:00
Prabhakar Kushwaha
76d067ac33 driver/mtd:IFC: Fix possible memory leak
if priv->bank >= MAX_BANK, priv should be freed before returning ENODEV.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scott@tyr.buserror.net>
2012-05-18 18:15:24 -05:00
Prabhakar Kushwaha
807fc702e0 driver/mtd: IFC NAND: Add support of ONFI NAND flash
- Fix NAND_CMD_READID command for ONFI detect.
  - Add NAND_CMD_PARAM command to read the ONFI parameter page.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scott@tyr.buserror.net>
2012-05-18 18:13:50 -05:00
Heiko Schocher
a35ea8070c mtd, nand: move some printfs to debug output.
current U-Boot shows on startup (for example on the enbw_cmc
board) the following printfs from the nand subsystem:

Flash: 2 MiB
NAND:  Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
nand_read_bbt: Bad block at 0x000002980000
nand_read_bbt: Bad block at 0x000003240000
128 MiB
MMC:   davinci: 0

remove them to debug output, so it shows with this patch:

Flash: 2 MiB
NAND:  128 MiB
MMC:   davinci: 0

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scott@tyr.buserror.net>
2012-05-18 18:11:37 -05:00
Liu, Wentao
65683026a5 nand_util: correct YAFFS image write function
In function nand_write_skip_bad(),for YAFFS filesystem part,
write_oob() will return 0 when success, so when rval equals 0,
it should continue to write the next page, and no break.

Signed-off-by: Wentao, Liu <wentao.liu@intel.com>
Acked-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Scott Wood <scott@tyr.buserror.net>
2012-05-18 18:08:45 -05:00
Timo Ketola
a1028730b5 imx: nand: Support flash based BBT
Signed-off-by: Timo Ketola <timo@exertus.fi>
Acked-by: Scott Wood <scottwood@freescale.com>
2012-05-15 08:31:33 +02:00
Mike Frysinger
7b15e2bb9b linux/compat.h: rename from linux/mtd/compat.h
This lets us use it in more places than just mtd code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-30 16:54:51 +02:00
Wolfgang Denk
1432c763f8 GCC4.6: Squash warnings in onenand_base.c
Fix gcc 4.6 build warnings:
onenand_base.c: In function 'onenand_probe':
onenand_base.c:2577:6: warning: variable 'maf_id' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2012-04-21 16:45:35 +02:00
Wolfgang Denk
db39f24151 Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  ARM926EJS: Fix cache.c to comply with checkpatch.pl
  ARM926EJS: Make asm routines volatile in cache ops
  MX35: mx35pdk: wrong board revision
  ARM1136: MX35: Make asm routines volatile in cache ops
  ARM: add u-boot.imx as target for i.MX SOCs
  M28: Pull out CONFIG_APBH_DMA so it's always enabled
  DMA: Split the APBH DMA init into block and channel init
  imx: Return gpio_set_value in gpio_direction_output
  imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5)
  imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
  imx: Remove unneeded/repititive definitions from imx headers
  i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
  MX31: mx31pdk: drop enable_caches from board file
  i.MX28: Fix initial stack pointer position
  mx35: mx35pdk: fix when cache functions are linked
  mx35: flea3: fix when cache functions are linked
  ARM: 926ejs: use debug() for misaligned addresses
  ARM1136: add cache flush and invalidate operations
  mx6qsabrelite: Fix the serial console port
  mx6qsabrelite: Add boot switch setting information into the README
  i.MX6: mx6qsabrelite: add cache commands if cache is enabled
  i.MX6: implement enable_caches()
  i.MX6: define CACHELINE_SIZE
  MX53: DDR: Fix ZQHWCTRL field TZQ_CS
  mx28evk: Add a README file
  mx28: Split the README into a common part and a m28 specific part
  tricorder: Load kernel from ubifs
  tricorder: Add UBIFS
  cm-t35: fix Ethernet reset timing
  hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT
  BeagleBoard: Remove userbutton command and use gpio command instead
  OMAP: Move omap1510inn to Unmaintained / Orphaned
2012-04-16 23:01:12 +02:00