Commit graph

15 commits

Author SHA1 Message Date
Tom Rini
80f1f3204a Kconfig: USB: Migrate existing USB_EHCI_xxx options
The following options are migrated over fully now:
- USB_EHCI_ATMEL
- USB_EHCI_MARVELL
- USB_EHCI_MX6
- USB_EHCI_MX7
- USB_EHCI_MSM
- USB_EHCI_ZYNQ
- USB_EHCI_GENERIC

This also requires fixing the depends on USB_EHCI_MARVELL as it's used
by Orion5X and Kirkwood as well.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15 13:00:26 -04:00
Tom Rini
64d6ac5bc4 Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig.
For a few SoCs, imply or default y this if USB is enabled.  In some
cases we had not already migrated to CONFIG_USB so do that as well.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15 13:00:21 -04:00
Tom Rini
8850c5d57c Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD
In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15 10:40:05 -04:00
Tom Rini
01abae4d04 Remove various unused interrupt related code
With d53ecad92f some unused interrupt related code was removed.
However all of these options are currently unused.  Rather than migrate
some of these options to Kconfig we just remove the code in question.

The only related code changes here are that in some cases we use
CONFIG_STACKSIZE in non-IRQ related context.  In these cases we rename
and move the value local to the code in question.

Fixes: d53ecad92f ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-06 20:42:18 -04:00
Tom Rini
c3b7cfe15e mx6sxsabreauto: Remove legacy CONFIG_PCA953X
When this board was switched to using more DM drivers we didn't disable
the legacy PCA953X driver.  This in turn learn to a build time warning
about implicit functions as i2c.h would not say anything about
'i2c_read' nor 'i2c_write'.  But this was not a fatal error as none of
the legacy driver would be linked in either.

Fixes: e389033f72 ("imx: mx6sxsabreauto: enable more dm drivers")
Reviewed-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05 11:38:51 -04:00
Peng Fan
e389033f72 imx: mx6sxsabreauto: enable more dm drivers
Enable MMC/I2C/GPIO/PMIC/REGULATOR/PCA953X DM drivers
for mx6sxsabreauto board. Drop non-DM code.

Note:
The i.MX DM drivers has such dependency.
  MXC GPIO -> MXC I2C -> PFUZE/REGULATOR
  MXC GPIO -> PCA953X
  MXC GPIO -> FSL_USDHC

So the drivers needs to be enabled all to avoid
compiling error.

The uboot dm tree log:
=> dm tree
 Class       Probed   Name
 ----------------------------------------
  root        [ + ]    root_driver
  thermal     [   ]    |-- imx_thermal
  simple_bus  [ + ]    |-- soc
  simple_bus  [ + ]    |   |-- aips-bus@02000000
  simple_bus  [   ]    |   |   |-- spba-bus@02000000
  gpio        [ + ]    |   |   |-- gpio@0209c000
  gpio        [ + ]    |   |   |-- gpio@020a0000
  gpio        [ + ]    |   |   |-- gpio@020a4000
  gpio        [ + ]    |   |   |-- gpio@020a8000
  gpio        [ + ]    |   |   |-- gpio@020ac000
  gpio        [ + ]    |   |   |-- gpio@020b0000
  gpio        [ + ]    |   |   |-- gpio@020b4000
  simple_bus  [   ]    |   |   |-- anatop@020c8000
  simple_bus  [   ]    |   |   |-- snvs@020cc000
  pinctrl     [ + ]    |   |   `-- iomuxc@020e0000
  pinconfig   [ + ]    |   |       `-- imx6x-sabreauto
  pinconfig   [ + ]    |   |           |-- i2c2grp-1
  pinconfig   [ + ]    |   |           |-- i2c3grp-2
  pinconfig   [   ]    |   |           |-- uart1grp
  pinconfig   [ + ]    |   |           |-- usdhc3grp
  pinconfig   [   ]    |   |           |-- usdhc3grp-100mhz
  pinconfig   [   ]    |   |           |-- usdhc3grp-200mhz
  pinconfig   [ + ]    |   |           |-- usdhc4grp
  pinconfig   [ + ]    |   |           `-- vccsd3grp
  simple_bus  [ + ]    |   |-- aips-bus@02100000
  mmc         [ + ]    |   |   |-- usdhc@02198000
  mmc         [ + ]    |   |   |-- usdhc@0219c000
  i2c         [ + ]    |   |   |-- i2c@021a4000
  i2c_generic [ + ]    |   |   |   |-- generic_8
  i2c_generic [ + ]    |   |   |   `-- generic_4e
  i2c         [ + ]    |   |   `-- i2c@021a8000
  gpio        [ + ]    |   |       |-- gpio@30
  gpio        [ + ]    |   |       `-- gpio@32
  simple_bus  [   ]    |   `-- aips-bus@02200000
  simple_bus  [   ]    |       `-- spba-bus@02200000
  simple_bus  [ + ]    `-- regulators
  regulator   [ + ]        `-- regulator@0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2017-01-27 10:53:14 +01:00
Simon Glass
a5d67547dd Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_EARLY_INIT_F

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25 17:38:32 -05:00
Jagan Teki
3788b451e3 config: Move CONFIG_BOARD_LATE_INIT to defconfigs
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-21 15:12:33 -05:00
Jagan Teki
fe4753cbc6 configs: fsl: Move SPI/SPI-FLASH configs to defconfig
Moved FSL_QSPI/SPI/SPI-FLASH configs from include/configs
into respective used defconfigs.
- CONFIG_FSL_QSPI
- CONFIG_SPI_FLASH
- CONFIG_SPI_FLASH_BAR
- CONFIG_SPI_FLASH_STMICRO

Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-09-22 14:17:02 +05:30
Tom Rini
645176d1d5 configs: Migrate CONFIG_USB_STORAGE
In some cases we were missing CONFIG_USB=y so enable that when needed.

Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-09 14:59:35 -04:00
Vanessa Maegima
432a8a5547 mx6sxsabreauto: Avoid hardcoded RAM size
Instead of passing the total RAM size via PHYS_SDRAM_SIZE option,
we should better use imx_ddr_size() function, which automatically
determines the RAM size.

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:49 +02:00
Tom Rini
89cb2b5f8b configs: Re-sync with cmd/Kconfig
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:47 -04:00
Tom Rini
cb04db155f include/configs: Whitespace fixup
A number of moveconfig.py runs have left a instances of multiple empty
lines in a row.  Correct this to a single empty line.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:46 -04:00
Tom Rini
78d1e1d0a1 configs: Re-sync almost all of cmd/Kconfig
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:40 -04:00
Ye Li
cf94a3427a imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board
Initial version for mx6sx SABREAUTO board support with features:
PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander.

Signed-off-by: Ye Li <ye.li@nxp.com>
2016-02-02 21:04:21 +01:00