Commit graph

19 commits

Author SHA1 Message Date
Lokesh Vutla
891ab74b1f davinci: Enable DDR_INIT for DA8XX
Commit 6aa4ad8e38 ("Convert CONFIG_SOC_DA8XX et al to Kconfig")
converted SOC_DA8XX to Kconfig but missed enabling DDR_INIT for
SOC_DA8XX, which broke OMAPL138 to boot.

Commit 2e87980580 ("davinci: Fix omapl138_lcdk builds") disabled
DDR_INIT for all DA850 SoCs. This failed all DA850 boards to boot
as ddr is not being initialized.

Enable SYS_DA850_DDR_INIT for DA8XX so that all DA850 and OMAPL138
will have ddr initialized

Fixes: 2e87980580 ("davinci: Fix omapl138_lcdk builds")
Fixes: 6aa4ad8e38 ("Convert CONFIG_SOC_DA8XX et al to Kconfig")
Reported-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-22 16:32:31 -04:00
Tom Rini
2e87980580 davinci: Fix omapl138_lcdk builds
The omapl138_lcdk platform is not a DA850 SoC so we need to select
SOC_DA8XX and not SOC_DA850, as it was before.  It does however point
out a bit of a misnomer in how all of these PLL defines are named as
they are generic to DA8xx, not DA850 centric.  Remove the 'if SOC_DA850'
under the defaults as these are simply the defaults.  As SOC_DA8XX will
select SYS_DA850_DDR_INIT when needed, we do not need it under both SOC
options.

Fixes: 76e22222d3 ("Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig")
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-31 15:44:58 -05:00
Adam Ford
76e22222d3 Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_DV_CLKMODE
   CONFIG_SYS_DA850_PLL0_POSTDIV
   CONFIG_SYS_DA850_PLL0_PLLDIV1
   CONFIG_SYS_DA850_PLL0_PLLDIV2
   CONFIG_SYS_DA850_PLL0_PLLDIV3
   CONFIG_SYS_DA850_PLL0_PLLDIV4
   CONFIG_SYS_DA850_PLL0_PLLDIV5
   CONFIG_SYS_DA850_PLL0_PLLDIV6
   CONFIG_SYS_DA850_PLL0_PLLDIV7
   CONFIG_SYS_DA850_PLL1_POSTDIV
   CONFIG_SYS_DA850_PLL1_PLLDIV1
   CONFIG_SYS_DA850_PLL1_PLLDIV2
   CONFIG_SYS_DA850_PLL1_PLLDIV3

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-30 12:52:57 -05:00
Adam Ford
6aa4ad8e38 Convert CONFIG_SOC_DA8XX et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SOC_DA8XX
   CONFIG_SOC_DA850
   CONFIG_DA850_LOWLEVEL
   CONFIG_MACH_DAVINCI_DA850_EVM
   CONFIG_SYS_DA850_PLL_INIT
   CONFIG_SYS_DA850_DDR_INIT

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: David Lechner <david@lechnology.com>
[trini: Rework CONFIG_SYS_DA850_PLL_INIT so it's selected on SOC_DA8XX]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-22 20:09:26 -05:00
Philipp Tomsich
b529993e02 spl: add hierarchical defaults for SPL_LDSCRIPT
With SPL_LDSCRIPT moved to Kconfig (and this being a 'string' config
node), all the lingering definitions in header files will cause
warnings/errors due to the redefinition of the configuration item.

As we don't want to pollute the defconfig files (and values should
usually be identical for entire architectures), the defaults are moved
into Kconfig.  Kconfig will always pick the first default that
matches, so please keep these values at the end of each file (to allow
any board-specific Kconfig, which will be included earlier) to
override with an unconditional default setting.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13 17:12:37 +02:00
Tom Rini
e5ec48152a Kconfig: Migrate BOARD_LATE_INIT to a select
This option should not really be user selectable.  Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-24 10:35:54 -05:00
Fabien Parent
a5ab44f69b davinci: omapl138_lcdk: configure ddr2
The SPL is unable to load u-boot because the DDR2 is not configured.
Configure the DDR2.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:14 -05:00
Fabien Parent
cd895dcbe0 davinci: omapl138_lcdk: configure pll0
The SPL is not able to boot properly because the PLL0 is not
configured. Configure it.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:13 -05:00
Fabien Parent
b31bf37a38 ARM: davinci: Move CONFIG_SYS_DA850_DDR_INIT to Kconfig
Clean config headers by moving CONFIG_SYS_DA850_DDR_INIT away to a
Kconfig file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:12 -05:00
Fabien Parent
f519b36491 ARM: davinci: Move CONFIG_SYS_DA850_PLL_INIT to Kconfig
Clean config headers by moving CONFIG_SYS_DA850_PLL_INIT away to a
Kconfig file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-03 13:21:12 -05:00
David Lechner
2ac07f75d1 arm: Add support for LEGO MINDSTORMS EV3
This is based on the davinci da850evm. It can boot from either the
on-board 16MB flash or from a microSD card. It also reads board
information from an I2C EEPROM.

The EV3 itself initally boots from write-protected EEPROM, so no
u-boot SPL is needed.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:40 -04:00
Simon Glass
d7e8b2b98a arm: Remove da830evm board
This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-28 10:48:23 -04:00
Simon Glass
a6f7f78744 arm: Remove enbw_cmc board
This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-11 14:11:15 -04:00
Simon Glass
6761946fb7 arm: Remove unmaintained davinci boards
These boards have not been converted to generic board by the deadline.
Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie,
sffsdr, sonata.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-11 14:11:11 -04:00
Masahiro Yamada
8d77576371 ARM: davinci: remove support for cam_enc_4xx
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2015-08-20 12:55:50 -04:00
Joe Hershberger
a26cd04920 arch: Make board selection choices optional
By making the board selections optional, every defconfig will include
the board selection when running savedefconfig so if a new board is
added to the top of the list of choices the former top's defconfig will
still be correct.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>
2015-05-12 18:10:02 -04:00
Peter Howard
a868e44333 davinci: add support for omapl138-lcdk board
Signed-off-by: Peter Howard <phoward@gme.net.au>
[trini: Add config file, update for ..._ether_addr() -> ..._ethaddr() rename]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-23 13:58:43 -04:00
Masahiro Yamada
cb957cda2b ARM: davinci: remove hawkboard support
This is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Sughosh Ganu <urwithsughosh@gmail.com>
Cc: Syed Mohammed Khasim <sm.khasim@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-02-24 17:07:29 -05:00
Masahiro Yamada
601fbec7cf ARM: davinci: move SoC sources to mach-davinci
Move
arch/arm/cpu/arm926ejs/davinci/* -> arch/arm/mach-davinci/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
2015-02-21 08:23:51 -05:00
Renamed from arch/arm/cpu/arm926ejs/davinci/Kconfig (Browse further)