Commit graph

382 commits

Author SHA1 Message Date
Patrick Delaunay
e21e3ffdd1 psci: Fix warnings when compiling with W=1
This patch solves the following warnings:
arch/arm/mach-stm32mp/psci.c:

warning: no previous prototype for ‘psci_set_state’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_arch_cpu_entry’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_features’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_version’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_affinity_info’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_migrate_info_type’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_cpu_on’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_cpu_off’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_system_reset’ [-Wmissing-prototypes]
warning: no previous prototype for ‘psci_system_off’ [-Wmissing-prototypes]

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-24 14:15:38 -04:00
Masahiro Yamada
2ce6b82d34 ARM: uniphier: set {kernel, ramdisk, fdt}_addr_r at boot-time
The base of DRAM will be changed for the next generation SoC.
The addresses needed for booting the kernel should be shifted
according to the DRAM base.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:09 +09:00
Masahiro Yamada
7095678787 ARM: uniphier: set dram_base environment variable
The base of DRAM will be changed for the next generation SoC.

Set the base address to the 'dram_base' environment variable, which
will be useful for scripting.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:08 +09:00
Masahiro Yamada
3cc936d8ab ARM: uniphier: set loadaddr at boot-time
The base of DRAM will be changed for the next generation SoC.
To support it along with existing SoCs in the single defconfig,
set 'loadaddr' at boot-time by adding the offset to the DRAM base.

CONFIG_SYS_LOAD_ADDR is still hard-coded for compilation, but the
value from environment variable 'loadaddr' should be used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:07 +09:00
Masahiro Yamada
72cd83ab81 ARM: uniphier: turn uniphier_set_fdt_file() into void function
For consistency with a function that will be added.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:07 +09:00
Masahiro Yamada
1f8357c3ab ARM: uniphier: remove CONFIG_SYS_SDRAM_BASE
The base address of DRAM was 0x80000000 for all the ARM SoCs of this
family in the past. It will be changed to 0x20000000 for a planned new
SoC. To support multiple SoCs by the single uniphier_v8_defconfig, the
base must be run-time determined.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:06 +09:00
Masahiro Yamada
34e29f7d94 ARM: uniphier: make mem_map run-time configurable
Currently, mem_map is hard-coded, and it worked well until the last
SoC. For a planned new SoC, the addresses of peripherals and DRAM
will be changed. Set it up run-time.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:05 +09:00
Masahiro Yamada
df72534121 ARM: uniphier: make dram_init() more generic
Make this function work with any channel being empty.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:05 +09:00
Masahiro Yamada
6f47c99423 ARM: uniphier: make dram_init() independent of SG_MEMCONF
Currently, dram_init() code relies on the fact the DRAM size
configuration exists in the SG_MEMCONF register.

This will no longer be true for a planned new SoC, which will
replace SG_MEMCONF with a different register.

Refactor the hook in a more generic way.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:04 +09:00
Masahiro Yamada
34ded87506 ARM: uniphier: detect register base addresses run-time
Until the last SoC, the register addresses have been hard-coded because
they are always constant. For a planned new SoC, the register bases
will be completely changed. I insist on supporting multiple SoCs/boards
by a single defconfig (uniphier_v8_defconfig) since duplicating similar
defconfig files is a maintenance burden. The base addresses must be
fixed-up at run-time somehow.

Previously, the board init code identified the SoC by reading out the
SG_REVISION register. This is much easier than parsing DT.

You cannot do it any more because the base address of SG will be
changed. The SG_REVISION register exists to read out the SoC ID, but
you never know its address before identifying the SoC. Oh well.

So, the possible solution is to parse the DT, and find out the node
with "*-soc-glue" compatible string. Then, sg_base is set to the value
of the "reg" property. The sc_base is set up likewise.

It is worth noting a pit-fall. Having sc_base and sg_base in the global
scope will make the life easier, but the global variables are poorly
supported before the relocation. In fact, the .bss section overwraps
with DT. Allocating them in the .bss section would break DT. So, I gave
dummy initializers to assign them in the .data section.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:03 +09:00
Masahiro Yamada
739ba41d5a ARM: uniphier: de-couple SC macros into base address and offset
The SC_* macros represent the address of SysCtrl registers.
For a planned new SoC, its base address will be changed.

Turn the SC_* macros into the offset from the base address.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:02 +09:00
Masahiro Yamada
d41b358fb3 ARM: uniphier: de-couple SG macros into base address and offset
The SG_* macros represent the address of SoC-glue registers.
For a planned new SoC, its base address will be changed.

Turn the SG_* macros into the offset from the base address.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:42:00 +09:00
Masahiro Yamada
c3d8f1e8e9 ARM: uniphier: detect SD boot mode
The planned new SoC supports the SD boot mode. Detect and display it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:59 +09:00
Masahiro Yamada
539d6e0dbc ARM: uniphier: make boot_is_swapped() code optional
The planned new SoC does not have SBC (System Bus Controller) block.
Make boot_is_swapped() an optional hook.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:58 +09:00
Masahiro Yamada
f7f390576d ARM: uniphier: check DT to determine whether to initialize SBC
If CONFIG_MICRO_SUPPORT_CARD is enabled, U-Boot initialize SBC
(System Bus Controller), which may not be really necessary.

Check the "socionext,uniphier-system-bus" node in DT run-time.
If and only if it is found and its "status" property is okay,
initialize the SBC block.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:57 +09:00
Masahiro Yamada
92d6524b4f ARM: uniphier: check DT to determine whether to use support card
If CONFIG_MICRO_SUPPORT_CARD is enabled, U-Boot tries to get access
to the devices on the support card, which may not actually exist.

Check the DT and search for the on-board devices run-time. If the
nodes are not found in DT, then disable the code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:56 +09:00
Masahiro Yamada
b521ea3958 ARM: uniphier: include <linux/io.h> from boot-device.c
This file calls readl(), so needs to include <linux/io.h>.
Currently, it relies on someone else including it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:54 +09:00
Masahiro Yamada
ef866f6f48 ARM: uniphier: use bool type for have_internal_stm parameter
This is boolean logic.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:53 +09:00
Masahiro Yamada
a179669c4e ARM: uniphier: clean up clk/Makefile
Now that 64-bit SoCs of this SoC family no longer support SPL,
this Makefile can be slightly simpler.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:52 +09:00
Masahiro Yamada
40c1a466ce ARM: uniphier: remove unused uniphier_ld11_boot_device_fixup()
The .boot_device_fixup() is only called by SPL.

Now that 64-bit SoCs of this SoC family no longer support SPL,
debug-uart-ld20.c is never compiled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:52 +09:00
Masahiro Yamada
69492fb4c5 ARM: uniphier: move sg_set_{pinsel, iectrl} to more relevant places
Move the sg_set_pinsel macro to arch/arm/mach-uniphier/arm32/debug_ll.S
since it is not used anywhere else.

Move the C functions sg_set_{pinsel,iectrl} to debug-uart.c since they
are not used anywhere else.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:18 +09:00
Masahiro Yamada
e3d5d3ac5b ARM: uniphier: remove unused init code for CONFIG_DEBUG_UART
debug_uart_init() is called from spl_board_init(), which is only
compiled for SPL. For U-boot proper, _debug_uart_init() is unreachable,
so dropped by the dead code elimination.

Now that 64-bit SoCs of this SoC family no longer support SPL,
debug-uart-ld20.c is never compiled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:18 +09:00
Masahiro Yamada
3b7fc3ff31 ARM: uniphier: include <linux/io.h> from dram_init.c
This file calls readl(), so needs to include <linux/io.h>.
Currently, it relies on someone else including it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:17 +09:00
Masahiro Yamada
139a94a986 ARM: uniphier: remove unused sg_set_iectrl_range()
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:16 +09:00
Masahiro Yamada
3f0d299e88 ARM: uniphier: remove unused SC_DPLLOSCCTRL
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:15 +09:00
Masahiro Yamada
caee7619a9 ARM: uniphier: fix build error for CONFIG_DEBUG_LL=y
Commit e27d6c7d32 ("ARM: uniphier: simplify SoC ID get function")
accidentally removed the macros needed to compile debug_ll.S

Revive them.

Fixes: e27d6c7d32 ("ARM: uniphier: simplify SoC ID get function")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29 22:31:14 +09:00
Masahiro Yamada
6bc50a8f69 ARM: uniphier: do not modify bootcmd environment variable at run-time
Some users might want to modify 'bootcmd' at compile-time by editing
include/configs/uniphier.h, but overwriting it at run-time makes it
impossible.

Instead, set 'bootdev' at run-time, which contains the boot device the
system is booting from, then indirectly reference it from 'bootcmd'.

It is up to users whether to override 'bootcmd'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29 11:38:33 +09:00
Miquel Raynal
a430fa06a4 mtd: move NAND files into a raw/ subdirectory
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in a
raw/ subdirectory, to ease the addition of a core file in nand/ and the
introduction of a spi/ subdirectory specific to SPI NANDs.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-20 20:10:49 +05:30
Masahiro Yamada
e39eed8f47 ARM: uniphier: remove ad-hoc clock enabling for EHCI
The MIO clock is enabled by default, and the STDMAC clock is
enabled by the clk driver.  The ad-hoc way to enable the clock
is no longer needed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-11 20:37:19 +09:00
Michal Simek
58008cbab5 Kconfig: Sort bool, default, select and imply options
Another round of sorting Kconfig entries aplhabetically.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30 07:18:48 -04:00
Masahiro Yamada
7ef5b1e7ed ARM: uniphier: enable distro boot
Switch to the distro boot for UniPhier platform.

 - Remove the environment vairalbes used to load images from raw
   block devices.

 - Keep the command to download images via tftp.  This will be
   useful to boot the kernel when no valid kernel image is ready
   yet in the file system.

 - Use root.cpio.gz instead of root.cpio.uboot because we always know
   the file size of the init ramdisk; it is loaded via either a file
   system or network.

 - Rename fit_addr_r to kernel_addr_r, which the distro command
   checks to get the load address of FIT image.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 08:47:53 +09:00
Masahiro Yamada
bb04d2ec4d ARM: uniphier: support fdt_fixup_mtdparts
Propagate the "mtdparts" environment variable to the DT passed
in to OS.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 08:47:53 +09:00
Masahiro Yamada
65fce76301 ARM: uniphier: split ft_board_setup() out to a separate file
Prepare to add more fdt fixup code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 08:47:53 +09:00
Masahiro Yamada
e968715302 ARM: uniphier: clean-up ft_board_setup()
The 'bd' is passed in ft_board_setup() as the second argument.
Replace 'gd->bd' with 'bd'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 08:47:53 +09:00
Masahiro Yamada
8c09f1f4fc ARM: uniphier: rename environment variable fdt_file to fdtfile
For booting Linux in the generic distro mechanism, cmd/pxe.c
retrieves the FDT file name from "fdtfile" environment variable.

Rename "fdt_file" to "fdtfile" for easier migration to distro boot.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-23 00:32:39 +09:00
Lokesh Vutla
acf1500138 arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A
Currently CPU_V7 kconfig symbol supports only ARMv7A architectures under
armv7 folder. This led to a misconception of creating separate folders
for armv7m and armv7r. There is no reason to create separate folder for
other armv7 based architectures when it can co-exist with few Kconfig
symbols.

As a first step towards a common folder, rename CPU_V7 as CPUV7A. Later
separate Kconfig symbols can be added for CPU_V7R and CPU_V7M and
can co exist in the same folder.

Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-05-07 15:53:24 -04:00
Patrick Delaunay
4f7dc2e603 uniphier: psci: save context id in cpu_on command
Replace the psci_save_target_pc call by the new function
psci_save(cpu, pc,context_id)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-07 11:52:55 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Masahiro Yamada
a322eb9ff6 ARM: uniphier: hide memory top by platform hook instead of CONFIG
I do not see a good reason to do this by a CONFIG option that affects
all SoCs.  The ram_size can be adjusted by dram_init() at run-time.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-09 21:58:19 +09:00
Masahiro Yamada
be893a5c09 ARM: uniphier: do not use RAM that exceeds 32 bit address range
LD20 / PXs3 boards are equipped with a large amount of memory beyond
the 32 bit address range.  U-Boot relocates itself to the end of the
available RAM.

This is a problem for DMA engines that only support 32 bit physical
address, like the SDMA of SDHCI controllers.

In fact, U-Boot does not need to run at the very end of RAM.  It is
rather troublesome for drivers with DMA engines because U-Boot does
not have API like dma_set_mask(), so DMA silently fails, making the
driver debugging difficult.

Hide the memory region that exceeds the 32 bit address range.  It can
be done by simply carving out gd->ram_size.  It would also possible to
override get_effective_memsize() or to define CONFIG_MAX_MEM_MAPPED,
but dram_init() is a good enough place to do this job.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-09 21:58:17 +09:00
Masahiro Yamada
7f8e75390b ARM: uniphier: use FIELD_PREP for PLL settings
It is tedious to define both mask and bit-shift.  <linux/bitfield.h>
provides a convenient way to get access to register fields with a
single shifted mask.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-12 00:36:12 +09:00
Masahiro Yamada
f2ce50b2d0 ARM: uniphier: compute SSCPLL values more precisely
Use DIV_ROUND_CLOSEST().  To make the JK value even more precise,
I used a bigger coefficient, then divide it by 512.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-12 00:36:11 +09:00
Dai Okamura
c30c44e799 ARM: uniphier: fix SSCPLL init code for LD11 SoC
Commit 682e09ff9f ("ARM: uniphier: add PLL init code for LD20 SoC")
missed to write the computed value to the SSCPLLCTRL2 register.

Fixes: 682e09ff9f ("ARM: uniphier: add PLL init code for LD20 SoC")
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-12 00:36:11 +09:00
Masahiro Yamada
00ed0e3ee3 ARM: uniphier: compile pll-base-ld20.c for PXs3
Fix the link error for the combination of
  CONFIG_ARCH_UNIPHIER_LD11=n
  CONFIG_ARCH_UNIPHIER_LD20=n
  CONFIG_ARCH_UNIPHIER_PXS3=y

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-12 00:35:59 +09:00
Masahiro Yamada
ac389b0749 ARM: uniphier: clean up board_init
Remove unnecessary DECLARE_GLOBAL_DATA_PTR and header includes.

<common.h> has been replaced with <linux/errno.h> and <linux/printk.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-04 21:59:52 +09:00
Masahiro Yamada
b443fb4210 ARM: dts: uniphier: Sync with Linux 4.15-rc1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:29:00 +09:00
Masahiro Yamada
10c62f41e3 ARM: uniphier: remove XIRQ pin settings
The XIRQ pins are now set up on the Linux side by the GPIO hogging.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:59 +09:00
Masahiro Yamada
eadd95a97e ARM: uniphier: remove IRQ settings
This work-around has been here in U-Boot because the AIDET and GPIO
drivers were missing in the upstream Linux.  Both are now available
in Linus' tree:
  - drivers/irqchip/irq-uniphier-aidet.c
  - drivers/gpio/gpio-uniphier.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-29 00:28:59 +09:00
Masahiro Yamada
624c0954c7 ARM: uniphier: use pr_*() more where appropriate
Commit dd74b945af ("ARM: uniphier: use pr_() instead of printf()
where appropriate"), but I missed to update this file for some reason.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-23 01:09:22 +09:00