Commit graph

27075 commits

Author SHA1 Message Date
Simon Glass
f5fbbe9579 x86: ivybridge: Perform initial CPU setup
Set up the flex ratio (controls speed versus heat output) and a few other
very early things.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:13 +01:00
Simon Glass
eddbad224b x86: Add msr read/write functions that use a structure
It is convenient to be able to adjust MSRs with a structure that splits the
two 32-bit halves into separate fields, as they are often dealt with
separately. Add a few functions to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:13 +01:00
Simon Glass
3f70a6f577 x86: Add clr/setbits functions
These are available on other architectures. Make them available on x86 also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:13 +01:00
Simon Glass
378a8634ad x86: Tidy up coreboot header usage
There is no need to explicitly write 'arch-coreboot' when including headers,
as when the arch directory points to coreboot the correct files will be
used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:13 +01:00
Simon Glass
2b6051541b x86: ivybridge: Add early LPC init so that serial works
The PCH (Platform Controller Hub) includes an LPC (Low Pin Count) device
which provides a serial port. This is accessible on Chromebooks, so enable
it early in the boot process.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:12 +01:00
Simon Glass
6fb3b72e87 x86: pci: Allow configuration before relocation
Add simple PCI access routines for x86 which permit use before relocation.
The normal PCI stack is still used, but for pre-relocation use there can
only ever be a single hose. After relocation, fall back to the normal
access, although even then on x86 machines there is normally only a single
PCI bus.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:12 +01:00
Simon Glass
6e5b12b614 x86: ivybridge: Enable PCI in early init
Enable PCI so we can access devices that need to be set up before relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:12 +01:00
Simon Glass
7430f10864 x86: Support use of PCI before relocation
Add support for using PCI before SDRAM is available, using early malloc()
and global_data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:34:12 +01:00
Simon Glass
d188b18f65 x86: Refactor PCI to permit alternate init
We want access PCI earlier in the init sequence, so refactor the code so
that it does not require use of a BSS variable to work. This will allow us
to use early malloc() to store information about a PCI hose.

Common PCI code moves to arch/x86/cpu/pci.c and a new
board_pci_setup_hose() function is provided by boards to set up the (single)
hose used by that board.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:34:11 +01:00
Simon Glass
70a09c6c3d x86: chromebook_link: Implement CAR support (cache as RAM)
Add support for CAR so that we have memory to use prior to DRAM init.
On link there is a total of 128KB of CAR available, although some is
used for the memory reference code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:11 +01:00
Simon Glass
d1cd045982 x86: Emit post codes in startup code for Chromebooks
On x86 it is common to use 'post codes' which are 8-bit hex values emitted
from the code and visible to the user. Traditionally two 7-segment displays
were made available on the motherboard to show the last post code that was
emitted. This allows diagnosis of a boot problem since it is possible to
see where the code got to before it died.

On modern hardware these codes are not normally visible. On Chromebooks
they are displayed by the Embedded Controller (EC), so it is useful to emit
them. We must enable this feature for the EC to see the codes, so add an
option for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:34:11 +01:00
Simon Glass
fce7b27683 x86: Build a .rom file which can be flashed to an x86 machine
On x86 machines U-Boot needs to be added to a large ROM image which is
then flashed onto the target board. The ROM has a particular format so it
makes sense for U-Boot to build this image automatically. Unfortunately
it relies on binary blobs so we cannot require this for the default
build as yet.

Create a u-boot.rom output file for this purpose.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:11 +01:00
Simon Glass
8ef07571a0 x86: Add chromebook_link board
This board is a 'bare' version of the existing 'link 'board. It does not
require coreboot to run, but is intended to start directly from the reset
vector.

This initial commit has place holders for a wide range of features. These
will be added in follow-on patches and series. So far it cannot be booted
as there is no ROM image produced, but it does build without errors.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:11 +01:00
Simon Glass
c03c951b06 x86: ifdtool: Allow creation of an empty ROM
Allow an empty ROM to be created, without needing to provide a descriptor.
The descriptor is not needed on some x86 boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:05 +01:00
Simon Glass
5c1b685e46 x86: Allow timer calibration to work on ivybridge
Unfortunately MSR_FSB_FREQ is not available on this CPU, and the PIT method
seems to take up to 50ms which is much too long.

For this CPU we know the frequency, so add another special case for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:12 +01:00
Masahiro Yamada
a5eb04db1a x86: use CONFIG_SYS_COREBOOT to descend into coreboot/ directory
The references of CONFIG_SYS_COREBOOT in arch/x86/cpu/coreboot/Makefile
are redundant because the build system descends into the directory
only when CONFIG_SYS_COREBOOT is defined.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:12 +01:00
Simon Glass
727c1a9871 x86: Replace fill_processor_name() with cpu_get_name()
This implementation has a 'cpu' prefix and returns a pointer to the string,
avoiding the need for copying.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:12 +01:00
Simon Glass
003504b6fe x86: Remove unnecessary find_fdt(), prepare_fdt() functions
These are no-longer needed so drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:12 +01:00
Simon Glass
21b9b14b49 x86: Add processor functions to halt and get stack pointer
Add a function to get the stack pointer and another to halt the CPU.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:12 +01:00
Simon Glass
880a3cc438 x86: config: Move common x86 configs to a common file
Many of the x86 CONFIG options will be common across different boards. Move
them to a common file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:12 +01:00
Simon Glass
cd392fe8a0 x86: Add ifdtool for working with Intel Flash Descriptor ROM images
Newer Intel chips require a Management Engine which requires a particular
format for the SPI flash that contains the boot loader. Add a tool that
supports creating and modifying these ROM images.

This tool is from Chrome OS but has been cleaned up to use U-Boot style
and to add comments. A few features have been added also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:11 +01:00
Simon Glass
e5901c94e3 dm: gpio: Add a function to read an ID from a list of GPIOs
For board IDs a common approach is to set aside several GPIOs for use in
determining the board ID. This can provide information about board features
and the revision.

Add a function that turns a list of GPIOs into an integer by assigning
each GPIO to a single bit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:11 +01:00
Simon Glass
469a579df2 dm: serial: Move current serial port pointer to global_data
In general we can't store things in the data section until we have inited
SDRAM. Some platforms allow this (e.g. those with SPL) but some don't. Move
the pointer to global_data so that it will work on all platforms.

Without this fix the serial port will not work prior to relocation with
driver model on some platforms.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:11 +01:00
Simon Glass
a9f04d49e5 fdt: Add a function to decode a variable-sized u32 array
Sometimes an array can be of variable size up to a maximum. Add a helper
function to decode this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:11 +01:00
Simon Glass
768e0f52f2 Move early malloc() to before arch_cpu_init()
For some CPUs, having malloc() available very early is useful. There is no
reason to delay this since early malloc is allocated before board_init_f()
is called.

Move early malloc() init nearer to the start of the init sequence.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:11 +01:00
Simon Glass
6cba6b9209 x86: Fix a warning with gcc 4.4.4
This warning appears even though it seems that the compiler could work it
out. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:10 +01:00
Bin Meng
258b1357c6 x86: Save TSC frequency in the global data
Return the saved TSC frequency in get_tbclk_mhz().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:10 +01:00
Bin Meng
80de049561 x86: Add quick TSC calibration via PIT
Use the same way that Linux does for quick TSC calibration via PIT
when calibration via MSR fails.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:10 +01:00
Bin Meng
076bb44b0e x86: Do TSC MSR calibration only for known/supported CPUs
Using MSR_PLATFORM_INFO (0xCE) to calibrate TSR will cause #GP on
processors which do not have this MSR. Instead only doing the MSR
calibration for known/supported CPUs.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:24:10 +01:00
Bin Meng
52f952bf5e x86: Do CPU identification in the early phase
The CPU identification happens in x86_cpu_init_f() and corresponding
fields are saved in the global data for later use.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:10 +01:00
Simon Glass
f67cd51e65 x86: Save the BIST value on reset
The built in self test value is available in register eax on start-up. Save
it so that it can be accessed later. Unfortunately we must wait until the
global_data is available before we can do this, so there is a little bit of
shuffling to keep it around.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:10 +01:00
Simon Glass
e1ffd81797 x86: Fix up some missing prototypes
Some functions are missing prototypes. Fix those that are specific to x86.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:09 +01:00
Simon Glass
8b37c7694f x86: Use the standard arch_cpu_init() function
Instead of an x86-specific cpu_init_f() function, use the normal U-Boot one
for this purpose. Also remove a useless/misleading comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:09 +01:00
Simon Glass
07387d1769 x86: Use the standard dram_init() function
Instead of having an x86-specific DRAM init function, adjust things so we
can use the normal one.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:09 +01:00
Simon Glass
76f90f3020 x86: Tidy up global descriptor table setup
This code is a little muddled, so tidy it up. Make sure that we put the
GDT in the right place and set it up properly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:09 +01:00
Simon Glass
3c00695ee1 x86: Invalidate TLB as early as possible
We should invalidate the TLB right at the start to ensure that we don't get
false address translations even though paging is disabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:09 +01:00
Simon Glass
85d87328ea x86: Remove board_init16() call which is not used
This allows a board to do very early init, but no boards need to do this.
We may as well drop this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:08 +01:00
Simon Glass
bc48806161 x86: Remove REALMODE_BASE which is no longer used
This was missed when the real mode support was dropped. Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:08 +01:00
Simon Glass
933cdbb479 fdt: Try to use fdt_address_cells()/fdt_size_cells()
Use these new functions where possible. They default to a value of 2 so we
cannot use them in some places where we need a default value of 1.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:18 +01:00
Simon Glass
2640387148 fdt: Add a function to decode a named memory region
Permit decoding of a named memory region from the device tree. This allows
easy run-time configuration of the address of on-chip SRAM, SDRAM, etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:18 +01:00
Simon Glass
41f09bbe59 fdt: Change fdt_pack_reg() to static and fix types
This function is only called within this file so make it static. Also
fix its argument types to be consistent with its caller.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:18 +01:00
Simon Glass
c654b5172a fdt: Add ft_system_setup() function for system device tree additions
Add an additional function for adding information to the device tree before
booting. This permits additions which are not board-specific.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:18 +01:00
Simon Glass
6f4dbc21e4 fdt: Tidy up error handling in image_setup_libfdt()
The message about needing to reset should be printed no matter what error
is printed. Also, an error should always be printed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:17 +01:00
Simon Glass
f3cc44f984 fdt: Enhance flashmap function to deal with region properties
Flash regions can optionally be compressed or hashed. Add the ability to
read this information from the flashmap.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:17 +01:00
Simon Glass
76489832b2 fdt: Use the correct return types for fdtdec_decode_region()
Use the correct FDT data types for this function. Also add more debugging.

Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:17 +01:00
Simon Glass
a9e8e29101 fdt: Export the fdt_find_or_add_subnode() function
This function is useful for ensuring that a node exists. Export it so it
can be used more widely.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:17 +01:00
Simon Glass
4ba98dc269 fdt: Report failure of ft_board_setup()
Since this function can fail, print a message when it does.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-21 04:43:17 +01:00
Simon Glass
e895a4b06f fdt: Allow ft_board_setup() to report failure
This function can fail if the device tree runs out of space. Rather than
silently booting with an incomplete device tree, allow the failure to be
detected.

Unfortunately this involves changing a lot of places in the code. I have
not changed behvaiour to return an error where one is not currently
returned, to avoid unexpected breakage.

Eventually it would be nice to allow boards to register functions to be
called to update the device tree. This would avoid all the many functions
to do this. However it's not clear yet if this should be done using driver
model or with a linker list. This work is left for later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2014-11-21 04:43:15 +01:00
Masahiro Yamada
111396ccb9 linux/kernel.h: add typechecking to roundup macro
This commit replaces roundup macro with the one from Linux Kernel.

DEFINE_ALIGN_BUFFER must be fixed because typechecking can not
be used in this context.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-20 11:28:25 -05:00
Masahiro Yamada
48c7ea3966 linux/kernel.h: import more macros
These macros seem to be useful for U-Boot too (or at least
harmless).  Imported from Linux 3.18-rc2.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-20 11:28:25 -05:00