Commit graph

41 commits

Author SHA1 Message Date
Pragnesh Patel
7257455e7c riscv: fu540: dts: Correct reg size of clint node
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26 10:01:37 +08:00
Sean Anderson
963911e9e1 riscv: k210: Reduce DMA block size
Although the max DMA size supported by the hardware register is 22 bits (or
4M), the Linux driver for this device only supports transfers of up to 2M.
On a device with 8M total memory, I don't think it will make too much of a
difference.

Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26 09:27:24 +08:00
Heinrich Schuchardt
2b5a719fc6 riscv: add DT binding for BOOT button on Maix board
Add a device tree binding for the BOOT button on the Maix board.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-08 11:42:36 -04:00
Sean Anderson
be3076e66d riscv: Add pinmux and gpio bindings for Kendryte K210
This patch adds the necessary device tree bindings.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Rick Chen <rick@andestech.com>
2020-10-08 11:42:36 -04:00
Sean Anderson
422c3c5edf riscv: Update SiFive device tree for new CLINT driver
We currently do this in a u-boot specific dts, but hopefully we can get
these bindings added in Linux in the future.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-09-30 08:54:46 +08:00
Sean Anderson
e89e8983dc riscv: Update Kendryte device tree for new CLINT driver
The interrupt controller property is removed from the clint binding because
the clint is not an interrupt-controller. That is, no other devices have an
interrupt which is controlled by the clint.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-09-30 08:54:46 +08:00
Sagar Shrikant Kadam
ea4e9570eb fu540: dtsi: add reset producer and consumer entries
The resets to DDR and ethernet sub-system are connected to
PRCI device reset control register, these reset signals
are active low and are held low at power-up. Add these reset
producer and consumer details needed by the reset driver.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-08-04 09:19:41 +08:00
Bin Meng
142dd57c5d riscv: dts: hifive-unleashed-a00: Make memory node available to SPL
Make memory node available to SPL in prepration to updates to SiFive
DDR RAM driver to read memory information from DT.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-24 14:56:29 +08:00
Jagan Teki
4243ff11fe sifive: fu540: Add Booting from SPI
Add booting from SPI for SiFive Unleashed board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-24 14:55:19 +08:00
Tom Rini
6e7d7aa2e2 Merge branch 'next'
Merge all outstanding changes from the current next branch in now that
we have released.
2020-07-06 15:46:38 -04:00
Pragnesh Patel
5ce50206ed riscv: sifive: fu540: enable all cache ways from U-Boot proper
Add L2 cache node to enable all cache ways from U-Boot proper.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-03 15:09:06 +08:00
Bin Meng
76585c9ecc riscv: fu540: dts: Correct reg size of otp and dmc nodes
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-02 10:03:03 +08:00
Bin Meng
6c6a29cde4 riscv: fu540: dts: Remove the unnecessary space in the cpu2_intc node
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-02 10:03:03 +08:00
Sagar Shrikant Kadam
eb75ee4bd6 riscv: dts: hifive-unleashed-a00: add cpu aliases
Add cpu aliases to U-Boot specific dtsi for hifive-unleashed.
Without aliases we see that the CPU device sequence numbers are set
randomly and the cpu list/detail command will show it as follows:
=> cpu list
  1: cpu@1      rv64imafdc
  2: cpu@2      rv64imafdc
  3: cpu@3      rv64imafdc
  0: cpu@4      rv64imafdc

Seems like CPU probing with dm-model also relies on aliases as observed
in case spi. The fu540-c000-u-boot.dtsi has cpu nodes and so adding
corresponding aliases we can ensure that cpu devices are assigned
proper sequence as follows:

=> cpu list
  1: cpu@1      rv64imafdc
  2: cpu@2      rv64imafdc
  3: cpu@3      rv64imafdc
  4: cpu@4      rv64imafdc

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-07-01 15:01:27 +08:00
Sean Anderson
bba8618c8e riscv: Add device tree for K210 and Sipeed Maix BitM
Where possible, I have tried to find compatible drivers based on the layout
of registers. However, many devices remain untested. All untested devices
have been left disabled, but some tentative properties (such as compatible
strings, and clocks, interrupts, and resets properties) have been added.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-07-01 15:01:22 +08:00
Pragnesh Patel
01cdef22ee riscv: sifive: fu540: add SPL configuration
Add a support for SPL which will boot from L2 LIM (0x0800_0000) and
then SPL will boot U-Boot FIT image (OpenSBI FW_DYNAMIC + u-boot.bin)
from MMC boot devices.

SPL related code is leveraged from FSBL
(https://github.com/sifive/freedom-u540-c000-bootloader.git)

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04 09:44:09 +08:00
Pragnesh Patel
25d0853fcb riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux
This sync has changes required to use GPIO in U-Boot and
U-Boot SPL.

Sync dts from linux v5.7-rc2 commit:
"riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS file"
(sha1: 0a91330b2af9f71ceeeed483f92774182b58f6d9)

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04 09:44:09 +08:00
Pragnesh Patel
329e023868 riscv: sifive: dts: fu540: set ethernet clock rate
Set ethernet clock rate to 125 Mhz so that it will work with 1000Mbps,
Earlier this is done by FSBL. With this change We can remove the
ethernet clock rate code from FSBL.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-06-04 09:44:09 +08:00
Pragnesh Patel
fdf5dba1fc riscv: sifive: dts: fu540: add U-Boot dmc node
Add dmc node to enable ddr driver. dmc is used to
initialize the memory controller.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04 09:44:08 +08:00
Pragnesh Patel
8a3fd8440f sifive: dts: fu540: Add DDR controller and phy register settings
Add DDR controller and phy register settings, taken from fsbl
(https://github.com/sifive/freedom-u540-c000-bootloader.git)

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04 09:44:08 +08:00
Pragnesh Patel
0eed87ed90 riscv: sifive: dts: fu540: Add board -u-boot.dtsi files
Devicetree files in FU540 platform is synced from Linux, like other
platforms does. Apart from these U-Boot in FU540 would also require
some U-Boot specific node like clint.

So, create board specific -u-boot.dtsi files. This would help of
maintain U-Boot specific changes separately without touching Linux
dts(i) files which indeed easy for syncing from Linux between
releases.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04 09:44:08 +08:00
Pragnesh Patel
88eec6159a riscv: sifive: fu540: Use OTP DM driver for serial environment variable
Use the OTP DM driver to set the serial environment variable.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-04 09:44:08 +08:00
Jagan Teki
286bcdb40f sifive: fu540: Enable spi-nor flash support
HiFive Unleashed A00 support is25wp256 spi-nor flash,
So enable the same and add test result log for future
reference.

Tested on SiFive FU540 board.

Thanks to Sagar for various use cases and tests.

[QUAD mode in dt with spi-tx-bus-width: <4>]
 pp opcode      = 0x34 [QUAD MODE]
 read opcode  = 0x6c  [QUAD MODE]
 erase opcode = 0x21

SPI-NOR:
1. erase entire flash: Pass
2. write entire flash: Pass
3. read entire flash: Pass
4. cmp 32MiB read back data: Pass
5. MMC: Booted Linux and dtb from mmc

[SPI MODE in dt with spi-tx-bus-width: <1>]
pp opcode     = 0x12 [SPI MODE]
read opcode  = 0xc   [SPI MODE]
erase opcode = 0x21

SPI-NOR:
1. erase entire flash: Pass
2. write entire flash: Pass
3. read entire flash: Pass
4. cmp 32MiB read back data: Pass
5. MMC: Booted Linux and dtb from mmc

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Jagan Teki
0edb066ce5 riscv: dts: hifive-unleashed-a00: Add -u-boot.dtsi
Add U-Boot specific dts file for hifive-unleashed-a00, this
would help to add u-boot specific properties and other node
changes without touching the base dts(i) files which are easy
to sync from Linux.

Added spi2 alias for qspi2 as an initial u-boot specific
property change.

spi probing in current dm model is very much rely on aliases
numbering. Even though the qspi2 can't come under any associated
spi nor flash it would require to specify the same to make proper
binding happen for other spi slaves.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Rick Chen
cca8b1e5b2 riscv: dts: Add #address-cells and #size-cells in nor node
Those are required for cfi-flash driver to get correct address information.
Also modify size description correctly.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: KC Lin <kclin@andestech.com>
Cc: Alan Kao <alankao@andestech.com>
2019-12-10 08:23:10 +08:00
Rick Chen
f05b6569a9 riscv: dts: Support four cores SMP
Add CPU2 and CPU3 information in cpus node
to support four cores SMP booting.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: KC Lin <kclin@andestech.com>
Cc: Alan Kao <alankao@andestech.com>
2019-12-10 08:23:10 +08:00
Jagan Teki
b82a18549f riscv: dts: Add hifive-unleashed-a00 dts from Linux
Sync the hifive-unleashed-a00 dts from Linux with
below commit details:

commit <2993c9b04e616df0848b655d7202a707a70fc876> ("riscv: dts: HiFive
Unleashed: add default chosen/stdout-path")

Idea is to periodically sync the dts from Linux instead of
tweaking internal changes one after another, so better not
add any intermediate changes in between. This would help to
maintain the dts files easy and meaningful since we are
reusing device tree files from Linux.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-12-10 08:23:10 +08:00
Rick Chen
cf6ee112d8 riscv: dts: move out AE350 L2 node from cpus node
When L2 node exists inside cpus node, uclass_get_device
can not parse L2 node successfully. So move it outside
from cpus node.

Also add tag-ram-ctl and data-ram-ctl attributes for
v5l2 cache controller driver. This can adjust timing
by requirement from dtb to improve performance.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: KC Lin <kclin@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-03 09:31:03 +08:00
Neil Armstrong
ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30
Rick Chen
48b90d9db5 riscv: dts: fix CONFIG_DEFAULT_DEVICE_TREE failure
It occurs since commit 27cb7300ff
("Ensure device tree DTS is compiled").

More details can refer to
89c2b5c020
ARM: fix arch/arm/dts/Makefile

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08 09:46:00 +08:00
Rick Chen
a1ce531ab2 riscv: dts: ae350 support SMP
Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08 09:45:08 +08:00
Bin Meng
dcad9b8d66 riscv: Remove ae350.dts
This is not used by any board. Remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
2018-12-18 09:56:27 +08:00
Rick Chen
bae2d72507 riscv: dts: Add ae350_32.dts for RV32I
Add ae350_32.dts for 32 bit. And also rename
ae350.dts to ae350_64.dts for 64 bit.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
2018-11-26 13:57:55 +08:00
Rick Chen
7424e95a69 riscv: dts: Sync to Linux Kernel ae350 dts.
Use same dts to boot U-Boot and Kernel.

Following are the change notes :
1 Remove early printk bootargs.
2 Timer frequency are changed to 60MHz.
3 Add dma, snd, lcd, virtio nodes which are used
  in kernel drivers. They does not been used by U-Boot.
4 Change spi irq from 3 to 4.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
2018-11-26 13:57:44 +08:00
Bin Meng
4694c93fef riscv: ae350: Clean up mixed tabs and spaces in the dts
There are quite a lot of mixed tabs and spaces in the ae350.dts.
Clean them up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-10-03 17:48:19 +08:00
Rick Chen
7286e46a79 riscv: dts: Support cfi flash
Add nor node for cfi-flash driver and smc node
for smc(aftsmc020) controller.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-05-29 14:45:04 +08:00
Rick Chen
c14e90e844 riscv: dts: Sync DT with Linux Kernel
Use same dts to boot U-Boot and RISC-V
Linux Kernel v4.16-rc2 in ax25-ae350 platform.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-05-29 14:45:03 +08:00
Rick Chen
6f4dd62f33 riscv: cpu: nx25: Rename as ax25
Andes has rearranged the product combinations.
nx25 and ax25 both are RISC-V architecture cpu core.
But ax25 has MMU unit inside, and nx25 is not.

Cpu nx25 and platform ae250 are arranged in pairs.
Cpu ax25 and platform ae350 are arranged in pairs.

This patch will rename
nx25 as ax25
ae250 as ae350
nx25-ae250 as ax25-ae350
including filename, variable, string and definition.

Then u-boot can boot linux kernel in ae350
platform reasonably.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-05-29 14:45:02 +08:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Rick Chen
177c16c933 riscv: dts: AE250 support sd High-Speed mode
Enable High-Speed mode with cap-sd-highspeed in dts.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
2018-03-30 13:13:34 +08:00
Rick Chen
039ed7c572 riscv: nx25: dts: Add AE250 dts to support RISC-V
AE250 is the Soc using NX25 cpu core base on RISC-V arch.
Details please see the doc/README.ae250.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>
2018-01-12 08:05:12 -05:00