The btrfs_decompress() function mostly (u32)-1 on error but it can
also return -EPERM or other kernel error codes from zstd_decompress().
The "ret" variable is an int, so we could just check for negatives.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
The x509_cert_parse() and pkcs7_parse_message() functions return error
pointers. They don't return NULL. Update the checks accordingly.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This should be allocating the memory for "item" instead of "menu".
The item struct is 48 bytes instead of 96 (assuming a 64bit system)
so this saves a little memory.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Match the "=0x" instead of just "=0".
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heinrich.Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This line break is not done correctly. We don't want to have all those
tabs in the printed output.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The u16_strlcat() is in units of u16 not bytes. So the limit needs to
be ARRAY_SIZE() instead of sizeof().
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
These lines are supposed to be indented one more tab. Otherwise it's
confusing to read.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
We know that "pa" is non-NULL so it's nicer to just return zero instead
of return !pa. This has no effect on runtime behavior.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The "oftree_count" is the number of entries which have been set in
the oftree_list[] array. If all the entries have been initialized then
this off by one would result in reading one element beyond the end
of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
If btrfs_read_fs_root() fails with -ENOENT, then we go to the next
entry. Fine. But if it fails for a different reason then we need
to clean up and return an error code. In the current code it
doesn't clean up but instead dereferences "root" and crashes.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
The ec_command_inptr() function returns negative error codes or
the number of bytes that it was able to read. The cros_ec_get_sku_id()
function should return negative error codes. Right now it returns
positive error codes or negative byte counts.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The VNBYTES() macro needs to have parentheses to prevent some (harmless)
macro expansion bugs. The VNBYTES() macro is used like this:
VID_TO_PIXEL(x) * VNBYTES(vid_priv->bpix)
The * operation is done before the / operation. It still ends up with
the same results, but it's not ideal.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The parentheses are in the wrong place so this passes the number of
bytes to write as "sizeof(index_0) != TPM_SUCCESS" when just
"sizeof(index_0)" was intended. (1 byte vs 4 bytes).
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
This returns the wrong variable. It ends up returning NULL when it was
suppose to return an error pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Both the Linux kernel and libbsd agree that strlcpy() should always
return strlen(src) and not include the NUL termination. The incorrect
U-Boot implementation makes it impossible to check the return value for
truncation, and breaks code written with the usual implementation in
mind (for example, fdtdec_add_reserved_memory() was subtly broken).
I reviewed all callers of strlcpy() and strlcat() and fixed them
according to my understanding of the intended function.
This reverts commit d3358ecc54 and adds
related fixes.
Fixes: d3358ecc54 ("lib: string: Fix strlcpy return value")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
In [1] Sam points out an assertion does not hold true for 32-bit
platforms, which only impacts Large File Support (LFS) API usage
in erofs-utils according to Xiang [2]. We don't think these APIs
are used in u-boot and this restriction could be safely removed.
[1] https://lists.denx.de/pipermail/u-boot/2023-July/524679.html
[2] https://lists.denx.de/pipermail/u-boot/2023-July/524727.html
Fixes: 3a21e92fc2 ("fs/erofs: Introduce new features including ztailpacking, fragments and dedupe")
Signed-off-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Tested-by: Sam Edwards <CFSworks@gmail.com>
CONFIG_$(SPL_TPL_)SYS_MALLOC_F_LEN is defined as hex. If set to zero
manually, .config contains '0x0' and not '0' as value.
The default value for CONFIG_SPL_SYS_MALLOC_F_LEN should not be set to 0
but to 0x0 if CONFIG_SPL_FRAMEWORK=n to match a manually set value.
Fixes: c0126bd862 ("spl: Support bootstage, log, hash and early malloc in TPL")
Fixes: b616947052 ("SPL: Do not enable SPL_SYS_MALLOC_SIMPLE without SPL_FRAMEWORK by default")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
All SPL hash algorithm options are collected in lib/Kconfig. Move
SPL_CRC32 there as well.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Simon Glass <sjg@chromium.org>
There is another SPL_MD5 option defined in lib/Kconfig.
Renaming SPL_MD5_SUPPORT introduced duplicate option with
different description. As for now FIT and hash algorithm options
are not related to each others, removing a duplicate option seems OK.
Fixes: 4b00fd1a84 ("Kconfig: Rename SPL_MD5_SUPPORT to SPL_MD5")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
In the common bloblist code we call crc32 to get a checksum for the
data. Ensure we will have the CRC32 code via select.
Signed-off-by: Tom Rini <trini@konsulko.com>
With this change the DT and binding files are under the at91 tree
maintainer, and get_maintainer.pl correctly reports the entry.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
The retimer reset/power on logic was changed in a recent commit,
however, it neglected to check if the commands sent to the
board microcontroller (to control power to the retimer chip)
actually completed.
Add return checks for these operations so any failures will
be reported to the user.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: 7a041fea2 ("board: traverse: ten64: ensure retimer reset
is done on new board revisions")
Update MAINTAINERS file. Add missing MAINTAINERS file for Spider,
Whitehawk and V3HSK boards. Update mail addresses. Add file globs
to match on DT and driver files related to these boards.
The GRPEACH and R2DPLUS are special in that they are not R-Car
and have their own set of specialized drivers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
As Pali Rohár has asked to not be copied on changes to files he is not
a specific maintainer of, add his address to .get_maintainer.ignore.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
To reduce overall job time, move a number of smaller jobs together.
These should still be safely under 1 hour total time, but reducing the
overall number of jobs should help with the queue slightly.
Signed-off-by: Tom Rini <trini@konsulko.com>
The job for rockchip vendor platforms has again gotten close to or
exceeded one hour. Rework things such that we move the 32bit platforms
back to the general 32bit ARM job (as there's time there) and make these
build only the 64bit platforms.
Signed-off-by: Tom Rini <trini@konsulko.com>
buildman minor fixes
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmTOp5wRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreYApAf+P45nQXX2L0lFpu5vJQ+Xy1VHDh+OE5sU
yVWm2A0zc7L0TyLn4fX5PGF+1C7gZjYGQ6I9OVroS58fXR5o6WjCelCMhE1wxL5i
AgHKmrUUw6XUalF317RquRWDPLAD6KZ1T8XUgjF2PnBwd2RwMH4zW/Ls73UFBf+4
gIi0zlqLsX8zSeFAyitRWobM4gJT4PUAxz7jexBEk9y3EjOufcLqpdl2Y4JAxTtl
82AYy9nJbPyFrT9lIGP9nfPenVPGKL6wdzc5C/sGLeRlutNKgrJTnjWRkJV+ThPx
mIZVSzwi2cbYnMpq1nEGnj+cH6R73xxybj17MVzevyAQNXAZcZfQ+Q==
=Nbd9
-----END PGP SIGNATURE-----
Merge tag 'dm-pull-5aug23' of https://source.denx.de/u-boot/custodians/u-boot-dm
binman support for Xilinx signing
buildman minor fixes
Some boards use a MAINTAINERS entry to specify common files without
referencing any defconfigs. This is allowed and should not result in a
warning.
Drop the warning in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Recent refactoring changed buildman to continue operation after fetching
a toolchain. Fix this.
Fixes: b868064652 ("bulidman: Move toolchain handling to a function")
Signed-off-by: Simon Glass <sjg@chromium.org>
DM_POST_INIT was changed to DM_POST_INIT_F.
To debug correct message, change type_name from dm_post_init to
dm_post_init_f.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
s/an/a/ :
Signed-off-by: Simon Glass <sjg@chromium.org>
Add test for the 'xilinx-bootgen' etype
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allow missing bootgen tool; comment testXilinxBootgenMissing() comment:
Signed-off-by: Simon Glass <sjg@chromium.org>
This adds a new etype 'xilinx-bootgen'. By using this etype it is
possible to created an signed SPL (FSBL in Xilinx terms) for
ZynqMP boards.
The etype uses Xilinx Bootgen tools in order to transform the SPL into
a bootable image and sign the image with a given primary and secondary
public key. For more information to signing the FSBL please refer to the
Xilinx Bootgen documentation.
Here is an example of the etype in use:
spl {
filename = "boot.signed.bin";
xilinx-bootgen {
pmufw-filename = "pmu-firmware.elf";
psk-key-name-hint = "psk0";
ssk-key-name-hint = "ssk0";
auth-params = "ppk_select=0", "spk_id=0x00000000";
u-boot-spl-nodtb {
};
u-boot-spl-dtb {
};
};
};
For this to work the hash of the primary public key has to be fused
into the ZynqMP device and authentication (RSA_EN) has to be set.
For testing purposes: if ppk hash check should be skipped one can add
the property 'fsbl_config = "bh_auth_enable";' to the etype. However,
this should only be used for testing(!).
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add the Xilinx Bootgen as bintool. Xilinx Bootgen is used to create
bootable SPL (FSBL in Xilinx terms) images for Zynq/ZynqMP devices. The
btool creates a signed version of the SPL. Additionally to signing the
key source for the decryption engine can be passend to the boot image.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
The nature of the network stack means that if we are going to use the
gadget mode USB network driver there's no easy path to implicitly
bind/unbind the driver. Enable the "bind" command by default here so
that we can bind/unbind this as needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Move the ethernet gadget driver registration and removal from ethernet
bind and unbind callbacks into driver DM probe and remove callbacks.
This way, when the driver is bound, which is triggered deliberately
using 'bind' command, the USB ethernet gadget driver is instantiated
and bound to the matching UDC. In reverse, when the driver is unbound,
which is again triggered deliberately using 'unbind' command, the USB
ethernet gadget driver instance is removed.
Effectively, this now behaves like running either 'ums' or 'dfu' or
any other commands utilizing USB gadget functionality.
This also drops use of usb_gadget_release() and moves the use of
usb_gadget_initialize() into usb_ether_init() used only by legacy
platforms that do not use 'bind' command properly yet. Those have
no place in drivers.
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Move the driver probe function above the driver structure, so it
can be placed alongside other related functions, like upcoming
remove function. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Tom Rini <trini@konsulko.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
These functions here are only ever called once since drop of non-DM
networking code. Inline them. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Tom Rini <trini@konsulko.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Two Toradex platform series. First, to quote Andrejs:
This series adds Yavia Carrier board name string to the known
Toradex carrier board list, and reworks carrier board and display
adapter name handling.
And then to quote Marcel:
This series adds initial support for the Toradex Verdin AM62 SoM.
The first commit adds resp. PID4s to the ConfigBlock, the second one
fixes an early clocking issue confirmed to be a weird bug in TI's
scripting, the third one fixes some binman labeling issue. And last but
not least support for the Toradex Verdin AM62 is added.
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
V1.0A module and subsequent V1.1 launch configuration SKUs. They are
strapped to boot from their on-module eMMC. U-Boot supports booting
from the on-module eMMC only, DFU support is disabled for now due to
missing AM62x USB support.
The device trees were taken straight from Linux v6.5-rc1.
Boot sequence is:
SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE
---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img)
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Fix rcfg_yaml to really point to rm-cfg.yaml and pcfg_yaml to really
point to pm-cfg.yaml which likely is the intention.
While at it also add labels for the remaining items like custmpk_pem,
dkey_pem, bcfg_yaml_sysfw, scfg_yaml_sysfw, pcfg_yaml_sysfw and
rcfg_yaml_sysfw.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Fix second mux option of clkout0 which should really be
DEV_BOARD0_CLKOUT0_IN_PARENT_HSDIV4_16FFT_MAIN_2_HSDIVOUT1_CLK10
rather than twice the same according to [1].
[1] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/am62x/clocks.html#clocks-for-board0-device
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
