Commit graph

51 commits

Author SHA1 Message Date
Patrice Chotard
16613edbc1 board: stm32f746-disco: Fix dram_init() in none SPL config
Replace CONFIG_SUPPORT_SPL by CONFIG_SPL_BUILD to allow
dram_init() execution when using none SPL defconfig
(stm32f746-disco_defconfig).

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:12 +02:00
Patrice Chotard
969bc0aece configs: stm32f769-disco: Rename stm32f769-disco_defconfig to stm32f769-disco_spl_defconfig
The current stm32f769-disco_defconfig file supports SPL, rename it to
stm32f769-disco_spl_defconfig to reflect the supported configuration.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:11 +02:00
Patrice Chotard
0d4ef527da configs: stm32f746-disco: Rename stm32f746-disco_defconfig to stm32f746-disco_spl_defconfig
The current stm32f746-disco_defconfig file supports SPL, rename it to
stm32f746-disco_spl_defconfig to reflect the supported configuration.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10 13:56:11 +02:00
Marek Behún
123ca114e0 net: introduce helpers to get PHY interface mode from a device/ofnode
Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the
"phy-mode" / "phy-connection-type" property. Add corresponding UT test.

Use them treewide.

This allows us to inline the phy_get_interface_by_name() into
ofnode_read_phy_mode(), since the former is not used anymore.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-10 08:44:12 +03:00
Patrick Delaunay
56a368f661 gpio: stm32: create include file for driver private data
The stm32 gpio driver private data are not needed in arch include files,
they are not used by code except for stm32 gpio and pincontrol drivers,
using the same IP; the defines for this IP is moved in a new file
"stm32_gpio_priv.h" in driver/gpio.

This patch avoids to have duplicated file gpio.h for each SOC
in MPU directory mach-stm32mp and in each MCU directory arch-stm32*
and allows to remove CONFIG_GPIO_EXTRA_HEADER for all STM32.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-10 17:03:36 +01:00
Tom Rini
776bf6a545 - Disable ATAGS for STM32 MCU and MPU boards
- Disable bi_boot_params for STM32 MCU and MPU boards
 - Update stm32-usbphyc node management
 - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards
 - Convert some USB config flags to Kconfig for various boards
 - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board
 - Remove specific CONFIG_STV0991 flags
 - Remove unused CONFIG_USER_LOWLEVEL_INIT flag
 - Add ofdata_to_platdata() callback for stm32_spi driver
 - Update for stm32f7_i2c driver
 - Remove gpio_hog_probe_all() from STM32 MP1 board
 - Fix bind command
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmFlgsIcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/plnND/4q9HSlvddybIPjBHlW
 rXz1ISwj8JZPp7R4MJcB4RiHofYZzjTXx3dDYUif6oQMpCDp64KPfcUDW0kaq8U7
 ZFwJvt59boV1XWlonIXMb3gAkY6gFa5PnYAE/YXEqKvPPvUb7FkT7BWxm4LxCGsj
 mEmboR8u87s6e4ZP03HJsSVa5FnNwJUZU8b+58Vxp10YC0PPf7kpmgCucDhrghvY
 TORlk259KUFoZXz4J4My0VzDdxE05gDqq1m6Xw1CzqcUbGysMvjNEHlxGdYbWD/U
 maamP19DUmKUREmpj3kO/JZvacLJlQP/mdGJ0OWKNbIr/3ha4dYagxDoRodEVo0m
 DYaaVPGvG24G78d5meB2q9wT0aGdTyaqm+XRBQMvMN2LlaGmu9duA1t6yBuyMcFk
 BeA7d0eHMo1ezD9FFZMxwIOAWhJlcYQEAMFhUwkR1B322w0NU4nbl9KRCGuGV2Zp
 ZFQV4BoMvb0NwAdo66xwZ+gSq4Wp1y46VM6x2Mw52v2F4p3teeAqR906TdQVYO8+
 hlYChO9+qK4JO7LPX/5wQ4FIzcq1HnTzTpuOSf28hsemiPMu0OkAQv1J7DohNZix
 wELBA+ZIjGXksmDTPjpXg5CSvVALa/l2G816hp7/XTJ1XRBSz/pzjhp5rwm42zmw
 x7EPnwzpAlQCSqTQ0sgO+fgoRA==
 =S4kl
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Disable ATAGS for STM32 MCU and MPU boards
- Disable bi_boot_params for STM32 MCU and MPU boards
- Update stm32-usbphyc node management
- Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards
- Convert some USB config flags to Kconfig for various boards
- Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board
- Remove specific CONFIG_STV0991 flags
- Remove unused CONFIG_USER_LOWLEVEL_INIT flag
- Add ofdata_to_platdata() callback for stm32_spi driver
- Update for stm32f7_i2c driver
- Remove gpio_hog_probe_all() from STM32 MP1 board
- Fix bind command

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12 12:01:00 -04:00
Patrick Delaunay
e69c4143e8 board: stm32: Remove the bi_boot_params initialization
The stm32 platforms never had to support an ATAGs-based Linux Kernel,
so remove the bi_boot_params initialization.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08 08:15:39 +02:00
Tom Rini
9774462e34 arm: Disable ATAGs support
With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and
stemmy, disable ATAG support.  A large number of platforms had enabled
support but never supported a kernel so old as to require it.  Further,
some platforms are old enough to support both, but are well supported by
devicetree booting, and have been for a number of years.  This is
because some of the ATAGs related functions have been re-used to provide
the same kind of information, but for devicetree or just generally to
inform the user.  When needed still, rename these functions to
get_board_revision() instead, to avoid conflicts.  In other cases, these
functions were simply unused, so drop them.

Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Stefan Bosch <stefan_b@posteo.net>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-07 16:22:30 -04:00
Giulio Benetti
6bd8845ad4 board: st: stm32f746-disco: fix console is not enabled while init dram
While initializing dram in spl_dram_init(), mdelay() is called that in
order calls get_ticks() that  verifies if timer exists, if doesn't, it
throws a panic(), but since preloader_console_init() has still not been
called those panic()s will fail. This doesn't help debugging, so let's
setup console before calling spl_dram_init() by moving it after
spl_dram_init().

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-04-08 20:29:54 +02:00
Patrice Chotard
729fa17f06 board: st: Remove board_early_init_f and board_late_init callbacks for stm32 boards
Remove board_early_init_f() and board_late_init() callbacks for stm32
boards as the corresponding flags (CONFIG_BOARD_LATE_INIT and
CONFIG_BOARD_EARLY_INIT_R) are now disabled.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-12 10:57:10 +01:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
5255932f01 common: Move some board functions out of common.h
A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:21 -05:00
Simon Glass
b03e0510d7 common: Move serial functions out of common.h
These functions belong in serial.h so move them over.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:11 -05:00
Yannick Fertré
0e73892184 board: Add STM32F769 SoC, discovery board support
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:38:47 +02:00
Patrice Chotard
77594d7fbf board: stm32f746-disco: Get MII/RMII phy_mode from DT
This is needed to make ethernet work on stm32f746-eval which
uses MII mode.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23 15:31:48 +02:00
Patrice Chotard
8ff21d6d9c stm32f7: board: Fix memory init
Commit 1473b12ad0 ("lib: fdtdec: Update ram_base to store ram start
adddress") brings regression on STM32F7 which can't boot.

Use fdtdec_setup_mem_size_base() to setup memory base and size.
Use fdtdec_setup_memory_banksize() to setup memory bank base and size.

Reported-by: Mark Olsson <mark@markolsson.se>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Mark Olsson <mark@markolsson.se>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-08-13 14:03:57 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
yannick fertre
92eac5848f stm32f7: board: add splash screen
Support several pixel format (8bits, 16bits, 24bits & 32bits).
Add new file st_logo_data.h which contains logo
stmicroelectronics_uboot_logo_8bit_rle.bmp.

Signed-off-by: yannick fertre <yannick.fertre@st.com>
2018-03-19 11:01:04 +01:00
Patrice Chotard
1b76a7333a arch-stm32: Remove stm32_periph.h
Remove arch/arm/include/asm/arch-stm32fx/stm32_periph.h
as all defines or enums are no more used.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
aa5e3e22f4 board: stm32: switch to DM STM32 timer
Use available DM stm32_timer driver instead of dedicated
mach-stm32/stm32fx/timer.c.

Remove all defines or files previously used for timer usage in
arch/arm/include/asm/arch-stm32fx and in arch/arm/mach-stm32/stm32fx

Enable DM STM32_TIMER for STM32F4/F7 and H7.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
20fe38e75a clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
Move SYSCFG clock setup into configure_clocks() instead of calling
clock_setup() from board file.

As this clock is only needed in case of ethernet enabled and as
both stm32f4 and stm32f7 are using the Designware ethernet IP,
we use CONFIG_ETH_DESIGNWARE to only enable this clock if needed.

Move the RMII setup from board_early_init_f() to board_init()
to insure that RMII bit is set only when clock driver is initialized.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28 09:39:15 -05:00
Patrice Chotard
68a69ed2a4 clk: clk_stm32f: Remove STMMAC clock setup
Thanks to 'commit ba1f966725 ("net: designware: add clock support")'
we don't need anymore to setup the STMMAC clock in board.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-28 09:39:15 -05:00
Patrice Chotard
3bc599c956 stm32: fix STMicroelectronics copyright
Uniformize STMicroelectronics copyrights headers for STM32
related code.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06 09:51:01 -05:00
Patrice Chotard
9242ece12b ram: stm32: migrate fmc defines in driver file
Migrate all FMC defines from arch/arm/include/asm/arch-stm32f7/fmc.h
to drivers/ram/stm32_sdram.c

This will avoid to add an additionnal arch-stm32xx/fmc.h file when
a new stm32 family soc will be introduced.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-26 11:29:07 -04:00
Patrice Chotard
122b2d4763 serial: stm32x7: migrate serial struct to driver
This allow to remove include/dm/platform_data/serial_stm32x7.h
which was included in the past by stm32x7 driver and by
stm32f746-disco.c board file.
Since patch 42bf5e7c27 "serial: stm32f7: add device tree support"
this file is no more needed in board file.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-07-26 11:26:54 -04:00
Vikas Manocha
1a73bd842e spl: stm32f7: configure for xip booting
With xip booting configuration, we don't need to copy the next image
(U-Boot or linux xipimage) from flash to sdram area.

Flash memory organization is like this:
	spl-U-Boot:	u-boot-spl.bin 	: 0x0800_0000
	U-Boot :	u-boot-dtb.bin	: 0x0800_8000
	linux :		xipImage	: 0x0800_8000

It is also possible to have U-Boot binary & linux binaries configured at
different addresses of flash memory like U-Boot at 0x0800_8000 & linux
xipImage at 0x0800_4000. But in any case, spl-U-Boot needs to be compiled for
U-Boot as next binary with SPL_OS_BOOT option disabled.
By default, spl is configured to boot linux xipImage.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09 11:24:00 -04:00
Vikas Manocha
55a3ef714f spl: stm32f7: add kernel boot support
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09 11:24:00 -04:00
Vikas Manocha
b97476965b stm32: stm32f7: add spl build support
This commit supports booting from stm32 internal nor flash. spl U-Boot
initializes the sdram memory, copies next image (e.g. standard U-Boot)
to sdram & then jumps to entry point.

Here are the flash memory addresses for U-Boot-spl & standard U-Boot:
	- spl U-Boot		: 0x0800_0000
	- standard U-Boot	: 0x0800_8000

To compile u-boot without spl: Remove SUPPORT_SPL configuration
(arch/arm/mach-stm32/Kconfig)

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
[trini: Rework Kconfig logic a bit]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09 11:23:55 -04:00
Simon Glass
150c5afe5b dm: gpio: Add live tree support
Add support for requesting GPIOs with a live device tree.

This involves adjusting the function signature for the legacy function
gpio_request_by_name_nodev(), so fix up all callers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes to stm32f746-disco.c:
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-01 07:03:10 -06:00
Simon Glass
9d922450aa dm: Use dm.h header when driver mode is used
This header includes things that are needed to make driver build. Adjust
existing users to include that always, even if other dm/ includes are
present

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 06:57:52 -06:00
Vikas Manocha
57af3cc32a stm32f7: stm32f746-disco: read memory info from device tree
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:57:21 -04:00
Vikas Manocha
2f80a9f72e stm32f746: to switch on user LED1 & read user button
All discovery boards have one user button & one user LED. Here we are
just reading the button status & switching ON the user LED.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:57:21 -04:00
Vikas Manocha
280057bd7d stm32f7: use stm32f7 gpio driver supporting driver model
With this gpio driver supporting DM, there is no need to enable clocks
for different gpios (for pin muxing) in the board specific code.

Need to increase the allocatable area required before relocation from 0x400 to
0xC00 becuase of 10 new gpio devices(& new gpio class) added in device tree.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08 11:57:21 -04:00
Vikas Manocha
d0b24c1aa9 stm32f7: use clock driver to enable sdram controller clock
This patch also removes the sdram/fmc clock enable from board specific
code.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:39:04 -04:00
Vikas Manocha
2d9c33ca3f stm32f7: use driver model for sdram initialization
As driver model takes care of pin control configuraion, this patch also
removes the sdram/fmc pin configuration.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:39:04 -04:00
Vikas Manocha
bf1ae4426b stm32f7: sdram: move sdram driver code to ram drivers area
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:39:02 -04:00
Vikas Manocha
e245f1a5db ARM: DT: stm32f7: add qspi pin contol node
It also removes the qspi pin configuration done during the
board initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17 14:15:16 -04:00
Vikas Manocha
c428a95833 ARM: DT: stm32f7: add ethernet pin contol node
It also removes the ethernet pin configuration done during the board
initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17 14:15:16 -04:00
Vikas Manocha
e34e19feb7 ARM: DT: stm32f7: add pin control node for serial port pins
And remove the uart pin configuration from board initialization.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17 14:15:15 -04:00
Vikas Manocha
b5be8f5ea8 stm32f7: clk: remove usart1 clock enable from board init
Before clock driver availability it was required to enable usart1 clock
for serial init but now with clock driver is taking care of usart1 clock.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-17 14:15:14 -04:00
Vikas Manocha
42bf5e7c27 serial: stm32f7: add device tree support
This patch adds device tree support for stm32f7 serial driver & removes serial
platform data structure.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-17 14:15:12 -04:00
Michael Kurz
d4363baada ARM: SPI: stm32: add stm32f746 qspi driver
This patch adds support for the QSPI IP found in stm32f7 devices.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
2017-01-28 14:04:50 -05:00
Michael Kurz
b20b70fcc0 net: stm32: add designware mac glue code for stm32
This patch adds glue code required for enabling the designware
mac on stm32f7 devices.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-28 14:04:47 -05:00
Michael Kurz
081de09d49 ARM: stm32: use clock setup function defined in clock.c
Use the clock setup function defined in clock.c instead of setting the
clock bits directly in the drivers.
Remove register definitions of RCC in rcc.h as these are already
defined in the struct in stm32.h

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-01-28 14:04:45 -05:00
Michael Kurz
bad5188be2 ARM: stm32: cleanup stm32f7 files
Cleanup stm32f7 files:
- use BIT macro
- use GENMASK macro
- use rcc struct instead of macro additions

Add missing stm32f7 register in rcc struct

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Vikas MANOCHA<vikas.manocha@st.com>
2017-01-28 14:04:43 -05:00
Tom Rini
95d5273303 Revert "stm32: Change USART port to USART6 for stm32f746 discovery board"
Per Vikas' request, the problem this commit is supposed to be solving is
something he doesn't see and further this introduces additional hardware
requirements.

This reverts commit 4b2fd720a7.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-21 15:38:13 -04:00
Toshifumi NISHINAGA
4b2fd720a7 stm32: Change USART port to USART6 for stm32f746 discovery board
This change is to remove a halt at about 200KiB
while sending a large(1MiB) binary to a micro controller using USART1.
USART1 is connected to a PC via an on-board ST-Link debugger
that also functions as a USB-Serial converter.
However, it seems to loss some data occasionally.
So I changed the serial port to USART6 and connected it to the PC using
an FTDI USB-Serial cable, therefore the transmission was successfully
completed.

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14 18:22:44 -04:00
Toshifumi NISHINAGA
25c1b1353c stm32: Add SDRAM support for stm32f746 discovery board
This patch adds SDRAM support for stm32f746 discovery board.
This patch depends on previous patch.
This patch is based on STM32F4 and emcraft's[1].

[1]:  https://github.com/EmcraftSystems/u-boot

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14 18:22:43 -04:00