stm32: stm32f7: add spl build support

This commit supports booting from stm32 internal nor flash. spl U-Boot
initializes the sdram memory, copies next image (e.g. standard U-Boot)
to sdram & then jumps to entry point.

Here are the flash memory addresses for U-Boot-spl & standard U-Boot:
	- spl U-Boot		: 0x0800_0000
	- standard U-Boot	: 0x0800_8000

To compile u-boot without spl: Remove SUPPORT_SPL configuration
(arch/arm/mach-stm32/Kconfig)

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
[trini: Rework Kconfig logic a bit]
Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Vikas Manocha 2017-05-28 12:55:10 -07:00 committed by Tom Rini
parent ea744fca0e
commit b97476965b
5 changed files with 65 additions and 3 deletions

View file

@ -8,6 +8,23 @@ config STM32F1
config STM32F7
bool "stm32f7 family"
select SUPPORT_SPL
select SPL
select SPL_CLK
select SPL_DM
select SPL_DM_SEQ_ALIAS
select SPL_DRIVERS_MISC_SUPPORT
select SPL_GPIO_SUPPORT
select SPL_LIBCOMMON_SUPPORT
select SPL_LIBGENERIC_SUPPORT
select SPL_MTD_SUPPORT
select SPL_OF_CONTROL
select SPL_OF_LIBFDT
select SPL_OF_TRANSLATE
select SPL_PINCTRL
select SPL_RAM
select SPL_SERIAL_SUPPORT
select SPL_SYS_MALLOC_SIMPLE
source "arch/arm/mach-stm32/stm32f4/Kconfig"
source "arch/arm/mach-stm32/stm32f1/Kconfig"

View file

@ -8,6 +8,7 @@
#include <common.h>
#include <dm.h>
#include <ram.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/armv7m.h>
#include <asm/arch/stm32.h>
@ -36,16 +37,18 @@ int get_memory_base_size(fdt_addr_t *mr_base, fdt_addr_t *mr_size)
}
int dram_init(void)
{
struct udevice *dev;
int rv;
fdt_addr_t mr_base, mr_size;
#ifndef CONFIG_SUPPORT_SPL
struct udevice *dev;
rv = uclass_get_device(UCLASS_RAM, 0, &dev);
if (rv) {
debug("DRAM init failed: %d\n", rv);
return rv;
}
#endif
rv = get_memory_base_size(&mr_base, &mr_size);
if (rv)
return rv;
@ -87,6 +90,28 @@ int board_early_init_f(void)
}
#endif
#ifdef CONFIG_SPL_BUILD
int spl_dram_init(void)
{
struct udevice *dev;
int rv;
rv = uclass_get_device(UCLASS_RAM, 0, &dev);
if (rv)
debug("DRAM init failed: %d\n", rv);
return rv;
}
void spl_board_init(void)
{
spl_dram_init();
preloader_console_init();
arch_cpu_init(); /* to configure mpu for sdram rw permissions */
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_NOR;
}
#endif
u32 get_board_rev(void)
{
return 0;

View file

@ -39,7 +39,6 @@ CONFIG_ETH_DESIGNWARE=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_FULL is not set
CONFIG_PINCTRL_STM32=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
CONFIG_OF_LIBFDT_OVERLAY=y

View file

@ -69,6 +69,7 @@ config SPL_PINCTRL
config SPL_PINCTRL_FULL
bool "Support full pin controllers in SPL"
depends on SPL_PINCTRL && SPL_OF_CONTROL
default n if TARGET_STM32F746_DISCO
default y
help
This option is an SPL-variant of the PINCTRL_FULL option.

View file

@ -10,7 +10,12 @@
#define CONFIG_SYS_FLASH_BASE 0x08000000
#define CONFIG_SYS_INIT_SP_ADDR 0x20050000
#define CONFIG_SYS_TEXT_BASE 0x08000000
#ifdef CONFIG_SUPPORT_SPL
#define CONFIG_SYS_TEXT_BASE 0xC0000000
#else
#define CONFIG_SYS_TEXT_BASE CONFIG_SYS_FLASH_BASE
#endif
/*
* Configuration of the external SDRAM memory
@ -69,4 +74,19 @@
#define CONFIG_CMD_CACHE
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_DISPLAY_BOARDINFO
/* For SPL */
#ifdef CONFIG_SUPPORT_SPL
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_SPL_LEN 0x00008000
#define CONFIG_SYS_UBOOT_START 0XC00003FD
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
CONFIG_SYS_SPL_LEN)
#endif
/* For SPL ends */
#endif /* __CONFIG_H */