Commit graph

120 commits

Author SHA1 Message Date
Becky Bruce
b81b773ead mpc8641hpcn: Use physical address in flash banks defintion
If the VA and PA of the flash aren't the same, the banks list
should be initialized to hold the physical address.  Correct this.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2009-02-10 00:26:03 +01:00
Kumar Gala
ea154a1781 FSL: Moved BR_PHYS_ADDR for localbus to common header
The BR_PHYS_ADDR macro is useful on all machines that have local bus
which is pretty much all 83xx/85xx/86xx chips.

Additionally most 85xx & 86xx will need it if they want to support
36-bit physical addresses.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-12-04 03:15:43 -06:00
Jon Loeliger
5a105a333d Removed unused CONFIG_L1_INIT_RAM symbol.
Prevent further viral propogation of the unused
symbol CONFIG_L1_INIT_RAM by just removing it.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-12-03 22:48:32 -06:00
Becky Bruce
d52082b12c mpc8641: Try to detect old .dts files
Since we've changed the memory map of the board, be nice and
add some checking to try to catch out-of-date .dts files.  We do
this by checking the CCSRBAR location in the .dts and comparing
it to the CCSRBAR location in u-boot.  If they don't match, a
warning msg is printed.  This isn't foolproof, but it's simple and
will catch most of the cases where an out-of-date .dts is present,
including all of the cases where a new u-boot is used with an old
standard MPC8641 .dts file as supplied with Linux.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:05 -06:00
Becky Bruce
3111d32c49 mpc8641: Support 36-bit physical addressing
This patch creates a memory map with all the devices
in 36-bit physical space, in addition to the 32-bit map.
The CCSR relocation is moved (again, sorry) to
allow for the physical address to be 36 bits - this
requires translation to be enabled.  With 36-bit physical
addressing enabled, we are no longer running with VA=PA
translations.  This means we have to distinguish between
the two in the config file.  The existing region name is
used to indicate the virtual address, and a _PHYS variety
is created to represent the physical address.

Large physical addressing is not enabled by default.
Set CONFIG_PHYS_64BIT in the config file to turn this on.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:05 -06:00
Becky Bruce
c759a01a00 mpc8641: Change 32-bit memory map
The memory map on the 8641hpcn is modified to look more like
the 85xx boards; this is a step towards a more standardized
layout going forward. As part of this change, we now relocate
the flash.

The regions for some of the mappings were far larger than they
needed to be.  I have reduced the mappings to match the
actual sizes supported by the hardware.

In addition I have removed the comments at the head
of the BAT blocks in the config file, rather than updating
them.  These get horribly out of date, and it's a simple
matter to look at the defines to see what they are set to
since everything is right here in the same file.

Documentation has been changed to reflect the new map, as this
change is user visible, and affects the OS which runs post-uboot.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:04 -06:00
Becky Bruce
bf9a8c3430 mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
We define CONFIG_MONITOR_BASE_EARLY to define the initial location
of the bootpage in flash.   Use this to create an early mapping
definition for the FLASH, and change the early_bats code to use this.

This  change facilitates the relocation of the flash since the early
mappings are no longer tied to the final location of the flash.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:04 -06:00
Becky Bruce
6bf98b1362 mpc8641: make DIAG_ADDR == FLASH_BASE
Currently, that's what it is, but it's hardcoded.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:03 -06:00
Becky Bruce
170deacb1d mpc8641: Drop imaginary second flash bank, map 8MB
There's a lot of setup and foo for the second flash
bank.  The problem is, this board doesn't actually have one.
Clean this up.  Also, the flash is 8M in size.  Get rid
of the confusing aliased overmapping, and just map 8M.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:03 -06:00
Becky Bruce
0f2d66027b mpc8641: only define CONFIG_ENV_SIZE once
It's currently defined twice inside in an if/else block, but
both halves set the same value.  Move the define outside
the if.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:02 -06:00
Becky Bruce
05df3e5a63 mpc8641: Remove extra "0" from BR2 define
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:01 -06:00
Becky Bruce
1266df8877 powerpc: change 86xx SMP boot method
We put the bootpg for the secondary cpus into memory and use
BPTR to get to it.  This is a step towards converting to the
ePAPR boot methodology.  Also, the code is written to
deal properly with more than 4GB of RAM.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-04 10:58:50 -06:00
Becky Bruce
b543156068 8641HPCN: Config file cleanup
There are several items in the config file that were hardcoded
but that should really be based on other config options, since
the regions are contiguous and depend on being so.  This cleans
that up a bit.  Also, add BR_PHYS_ADDR() macro to convert
addresses into the proper format for BR registers.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:05:01 -06:00
Becky Bruce
af5d100e8d mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
You can't actually have both, and with some coming changes to
change the memory map for the board and support 36-bit physical,
we need the extra BAT that is being consumed by having both.

I also make non-PCI configs build cleanly, for the sake of sanity.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:04:59 -06:00
Becky Bruce
98693b85d4 mpc8641: Stop supporting non-PCI_PNP configs
We don't actually ever do this, remove the code so we
can stop maintaining it.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-03 11:04:59 -06:00
Dave Liu
1c671977dc 86xx: remove the unused definition
Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-10-30 10:43:52 -05:00
Kumar Gala
c2083e0e11 86xx: Convert all fsl_pci_init users to new APIs
Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().

With these changes the board code is a bit smaller and we get dma-ranges
set in the device tree for these boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-10-24 17:35:48 -05:00
Kumar Gala
8ba93f68a1 86xx: Enable 64-bit PCI resources on all Freescale boards
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
2008-10-24 17:34:17 -05:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0e8d158664 rename CFG_ENV macros to CONFIG_ENV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5a1aceb068 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
93f6d72544 rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:00 +02:00
Jean-Christophe PLAGNIOL-VILLARD
32628c5008 cmd_mac: Move conditional compilation to Makefile
finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
start in commit ad8f8687b7

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 21:09:37 +02:00
Kumar Gala
6a8e569293 FSL DDR: Convert MPC8641HPCN to new DDR code.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:06:02 +02:00
Jean-Christophe PLAGNIOL-VILLARD
00b1883a4c drivers/mtd: Move conditional compilation to Makefile
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:42 +02:00
Timur Tabi
e2d31fb345 Update Freescale sys_eeprom.c to handle CCID formats
Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats.  The
NXID format replaces the older CCID format, but it's important to support both
since most boards out there still use the CCID format.  This change is in
preparation for using one file to handle both formats.  This will also unify
EEPROM support for all Freescale 85xx and 86xx boards.

Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
instead of ID_EEPROM_ADDR.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-07-15 10:59:27 -05:00
Jon Loeliger
1a247ba7fa Merge commit 'wd/master' 2008-06-06 10:48:31 -05:00
Becky Bruce
31d8267224 PPC: Create and use CONFIG_HIGH_BATS
Change all code that conditionally operates on high bat
registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
instead of the myriad ways this is done now.  Define the option
for every config for which high bats are supported (and
enabled by early boot, on parts where they're not always
enabled)

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-03 17:48:41 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Jon Loeliger
2c289e320d mpc86xx: Removed unused and unconfigured memory test code.
Besides, other common code exists.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-05-19 09:47:25 -05:00
Becky Bruce
4f93f8b1a4 86xx: Add reginfo command
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:56 -06:00
Becky Bruce
4933b91f8a 86xx: Support new law setup method and convert mpc8641
Adds the support code in cpu/mpc86xx for the new law setup code
recently created fsl_law.c, and changes the MPC8641HPCN config
to use this code.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:30 -06:00
Timur Tabi
6bee764bd6 86xx: enable command-line editing
Enable command-line editing for all MPC86xx boards.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-01-17 12:15:41 -06:00
Jon Loeliger
ad8f8687b7 FSL: Convert board/freescale/common/Makefile to use CONFIG_
Convert the board/freescale/common/Makefile to use
CONFIG_* options to select which files to conditionally
compile into the board/freescale/common library rather
than conditionally compiling entire files.

Now handles::
    CONFIG_FSL_PIXIS
    CONFIG_FSL_DIU_FB
    CONFIG_PQ_MDS_PIB

CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-16 12:05:05 -06:00
Kumar Gala
b009f3eca9 85xx: Remove cache config from configs.h
Either use the standard defines in asm/cache.h or grab the information
at runtime from the L1CFG SPR.

Also, minor cleanup in cache.h to make the code a bit more readable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:04 -06:00
Jon Loeliger
61d3421bde Don't slam #undef DEBUG in the 8641HPCN config file.
Doing so prevents it from being individually set
and useful in other files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-03 10:27:23 -06:00
Jon Loeliger
ea9f7395ec Convert MPC8641HPCN to use libfdt.
Assumes the presence of the aliases node in the DTS to
locate the ethernet, pci and serial nodes for fixups.

Use consistent fdtaddr and fdtfile in environment variables.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-03 10:27:03 -06:00
Jason Jin
9f23ca334a Unify pixis_reset altbank across board families
Basically, refactor the CFG_PIXIS_VBOOT_MASK values
into the separate board config files.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-11-07 14:08:45 -06:00
Zhang Wei
bbf4796f64 Fix USB support issue for MPC8641HPCN board.
The configuration file has already enabled USB, but it
missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
on MPC8641HPCN can not work because of the wrong USB
register endian.

And add the USB command to U-Boot commands list.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2007-11-03 22:15:12 +01:00
Kim Phillips
7608d75f9c support board vendor-common makefiles
if a board/$(VENDOR)/common/Makefile exists, build it.

also add the first such case, board/freescale/common/Makefile, to
handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
dictated by board configuration.

thusly get rid of alternate build dir errors such as:

FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory

by putting the common/ mkdir command in its proper place (the common
Makefile). Common bits from existing individual board Makefiles have
been removed.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-29 02:15:46 +02:00
Kim Phillips
3bb342fc85 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
and make some minor corrections to the FDT part of the README.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-29 01:46:25 +02:00
Andy Fleming
10327dc554 Add CONFIG_HAS_ETH0 to all boards with TSEC
The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
to update TSEC1's device-tree node, so we need to add it
to all the boards with TSECs.  Do this for 83xx and 86xx, too,
since they will eventually do something similar.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16 16:35:02 -05:00
Andy Fleming
3a79013e2a Define tsec flag values in config files
The tsec_info structure and array has a "flags" field for each
ethernet controller.  This field is the only reason there are
settings.  Switch to defining TSECn_FLAGS for each controller
in the config header, and we can greatly simplify the array, and
also simplify the addition of future boards.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-08-16 12:12:49 +02:00
Markus Klotzbuecher
78549bbf44 Merge with git://www.denx.de/git/u-boot.git 2007-08-07 22:30:29 +02:00
Jason Jin
0f460a1ee1 Configurations for ATI video card BIOS emulator
This patch add definition of the BIOS emulator and the ATI framebuffer
driver for MPC8641HPCN board.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2007-08-06 01:44:59 +02:00
Ed Swarthout
63cec5814f Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
All of the PCI/PCI-Express driver and initialization code that
was in the MPC8641HPCN port has now been moved into the common
drivers/fsl_pci_init.c.  In a subsequent patch, this will be
utilized by the 85xx ports as well.

Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.

Also enable the second PCI-Express controller on 8641
by getting its BATS and CFG_ setup right.

Fixed a u16 vendor compiler warning in AHCI driver too.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-06 00:22:24 +02:00
Jon Loeliger
659e2f6736 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 09:10:49 -05:00
Jon Loeliger
2f9c19e496 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:35:26 +02:00
Wolfgang Denk
98c440bee6 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-07-03 15:07:56 +02:00
Zhang Wei
a81d1c0b85 Add USB PCI-OHCI, USB keyboard and event poll support to the
MPC8641HPCN board config file.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2007-06-06 10:08:14 +02:00
Ed Swarthout
32922cdc47 mpc8641 image size cleanup
e600 does not have a bootpg restriction.
Move the version string to beginning of image at fff00000.
Resetvec.S is not needed.
Update flash copy instructions.
Add tftpflash env variable

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-06-05 13:27:34 -05:00
Kim Phillips
255a3577c8 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
For all practical u-boot purposes, TSECs don't differ throughout the
mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-05-17 00:07:21 +02:00
Jason Jin
5a58a73ceb Add flash cmd function to 8641HPCN ramboot
Also fixes some commmand for 8641 HPCN ramboot case.

Signed-off-by: Jason Jin <jason.jin@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-03-22 11:02:34 -05:00
Jon Loeliger
2047672684 Converted all 85xx boards to use a common FSL I2C driver.
Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
And removed hard i2c path from a few u-boot.lds scipts too.
Minor whitespace cleanups along the way.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-20 15:50:15 -05:00
Jon Loeliger
7237c033b0 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
in an effort to begin to unify the umpteen FSL I2C drivers that
are all otherwise very similar.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-19 11:34:11 -05:00
Jon Loeliger
8b283dbb3a Fix whitespace issues. 2006-10-10 17:16:04 -05:00
Haiying Wang
5567806b67 Change ramdiskaddr and dtbaddr
Remove PEX fluff commands.

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-25 17:28:20 -05:00
Jin Zhengxiong
dabf9ef8c1 Add AHCI define and sata support for MPC8641HPCN board.
Signed-off-by:Jason Jin<jason.jin@freescale.com>
2006-08-23 10:40:10 -05:00
Zhang Wei
d8ea2acf5f Add dtb boot-up parameter to default boot commands.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2006-08-23 10:32:08 -05:00
Jon Loeliger
fecf1c7e4d Fix BAT0 to actually be cacheable, non-guarded as documented.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-14 16:40:33 -05:00
John Traill
515ab8a62e Fix 8641HPCN timebase 2006-07-28 09:54:10 -05:00
Haiying Wang
bea3f28d28 Add support for reading and writing mac addresses to or from ID EEPROM.
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.

U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).

If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
Jin Zhengxiong
fcb28e7634 Fixed initrd issue by define big RAM
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
2006-07-13 10:35:10 -05:00
Jin Zhengxiong-R64188
bc09cf3c2b Fix RTL8139 in big endian
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
signed-off-by: Wei Zhang <wei.zhang@freescale.com>
2006-06-27 10:29:32 -05:00
Jin Zhengxiong-R64188
fa7db9c377 Enable PCIE1 for MPC8641HPCN board
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2006-06-27 09:17:59 -05:00
Jon Loeliger
9a655876e5 Enable dual DDR controllers and interleaving. 2006-05-19 13:54:02 -05:00
Jon Loeliger
586d1d5abd Update 86xx address map and LAWBARs. 2006-05-19 13:54:02 -05:00
Jon Loeliger
18b6c8cd8a Get MPC8641HPCN flash images working.
Enable the CFI driver.
    Remove bogus LAWBAR7 cruft.
    Use correct TEXT_BASE, Fixup load script.
    Enable SPD EEPROM during DDR setup.
    Use generic RFC 1918 IP addresses by default.
2006-05-09 08:23:49 -05:00
Jon Loeliger
5c9efb36a6 Cleanup whitespaces and style issues.
Removed //-style comments.
Use 80-column lines.
Remove trailing whitespace.
Remove dead code and debug cruft.
2006-04-27 10:15:16 -05:00
Jon Loeliger
debb7354d1 Initial support for MPC8641 HPCN board. 2006-04-26 17:58:56 -05:00