Commit graph

69573 commits

Author SHA1 Message Date
Michael Walle
6a457bb295 common: fit: add missing newline
The debug statement doesn't end with a newline. Add it.

Signed-off-by: Michael Walle <michael@walle.cc>
2020-11-19 09:45:49 -05:00
Philippe Reynes
2692749316 tools: image-host.c: use correct variable for strerrno
In the function get_random_data, strerrno is called with
the variable ret (which is the return of the function
clock_gettime). It should be called with errnor. This
commit fixes this mistake.

Reported-by: Coverity (CID: 312956)
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-19 09:45:49 -05:00
Philippe Reynes
cc34f04efd tools: image-host.c: use random instead of rand
According to the manpage of rand, it is recommended
to use random instead of rand. This commit updates
the function get_random_data to use random.

Reported-by: Coverity (CID: 312953)
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-19 09:45:49 -05:00
Arnaud Aujon Chevallier
5a7885cca5 arm: vexpress: don't reset flags in board_init to avoid losing previous ones
Re-submitted because of missing description and signed-off.

flags reset in board_init caused bugs when executing command like editenv
because the reallocated flag was lost.

Tested-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Arnaud Aujon Chevallier <arnaud@intelibre.fr>
2020-11-19 09:45:49 -05:00
Hoyeonjiki Kim
2a0a577aad env: mmc: Correct partition comparison in mmc_offset_try_partition
The function mmc_offset_try_partition searches the MMC partition for
locating environment data, by comparing the partition names with config
"u-boot,mmc-env-parition". However, it only compares the first word-size
bytes (size of 'const char *'), which may make the function to find
unintended partition.

Correct the function not to partially compare the partition name with
config "u-boot,mmc-env-partition".

Fixes: c9e87ba665 ("env: Save environment at the end of an MMC partition")
Signed-off-by: Hoyeonjiki Kim <jigi.kim@gmail.com>
Reviewed-by: Wolfgang Denk <wd@denx.de>
2020-11-18 13:46:58 -05:00
Tom Rini
e800d715e0 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- Enable SATA disk on QEMU RISC-V and update doc.
- k210 pinctrl updates:
  - Fix inverted IE and OE for I2C.
  - Rename power domains to match datasheet.
2020-11-17 09:52:34 -05:00
Sean Anderson
6e35c1cb12 pinctrl: k210: Rename power domains to match datasheet
This renames power domains to match the names on the k210 datasheet.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-17 15:09:28 +08:00
Sean Anderson
82b838f8dd pinctrl: k210: Fix inverted IE and OE for I2C
I2C and SCCB previously shared defaults. However, SCCB needs OE_INV and
IE_INV set, but I2C cannot have those bits set. This adds a separate
default for SCCB.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com>
2020-11-17 15:09:28 +08:00
Heinrich Schuchardt
f0b1831864 doc: qemu-riscv: describe attaching a disk image
How to add an emulated disk to QEMU may not be known to the user.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17 15:09:22 +08:00
Heinrich Schuchardt
2873ca2a78 riscv: enable SATA disk on QEMU RISC-V
Allow attaching a virtual SATA disk to QEMU RISC-V by implying
AHCI, AHCI_PCI, CMD_SCSI, DM_SCSI, PCI_INIT_R, SCSI, SCSI_AHCI.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17 15:09:16 +08:00
Heinrich Schuchardt
19dd274b56 riscv: sort SPECIFIC_OPTIONS
Sort implied options in BOARD_SPECIFIC_OPTIONS in the same sequence as in
.config.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-11-17 15:09:16 +08:00
Tom Rini
a575c55d1e Merge branch 'pr-2020-11-17' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- PinePhone support (Samuel)
- V3/S3 support (Icenowy)
2020-11-16 22:53:29 -05:00
Icenowy Zheng
6d5d6bb50d sunxi: dts: sync Allwinner V3s-related DTs from Linux 5.10-rc1
This commit imports device tree files that are related to Allwinner V3
series from Linux commit 3650b228f83a ("Linux 5.10-rc1").

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:21 +00:00
Icenowy Zheng
8c51c65273 sunxi: allow to use AXP20[39] attached to I2C0 on V3 series
The reference design of Allwinner V3 series uses an
AXP203 or AXP209 PMIC attached to the I2C0 bus of the SoC, although the
first community-available V3s board, Lichee Pi Zero, omitted it.

Allow to introduce support for the PMIC on boards with it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:21 +00:00
Icenowy Zheng
6ffdc43cc5 clk: sunxi: add compatible string for V3
A new compatible string is introduced for V3 CCU, because it has a few
extra features available.

Add the compatible string to the clock driver. As the extra features are
not touched, just share the description struct now.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:21 +00:00
Icenowy Zheng
889116bde6 sunxi: gpio: introduce compatible string for V3 GPIO
A new compatible string is introduced for V3 GPIO, because it has more
pins available than V3s.

Add the compatible string to the GPIO driver.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:21 +00:00
Icenowy Zheng
ef9025b5a9 sunxi: add V3/S3 support
Allwinner V3/Sochip S3 uses the same die with Allwinner V3s/S3L, but V3 comes
with no co-packaged DDR (DDR3 is usually used externally), and S3L comes
with co-packaged DDR3.

Add support for Allwinner V3/S3 chips by add SoC names to original V3s
choice, and allow to select DDR3.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:21 +00:00
Samuel Holland
882fb905e0 sunxi: a64: Add a defconfig for the PinePhone
The PinePhone is a smartphone produced by Pine64, with an A64 SoC,
2 or 3 GiB LPDDR3 RAM, 16 or 32 GiB eMMC, 720x1440 MIPI-DSI panel,
and Quectel EG25-G modem.

There are two main board revisions: 1.1 for early adopters, and 1.2
for mass production. Since there is code to detect the board revision
at boot, one config/image can support both boards.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17 00:42:21 +00:00
Samuel Holland
e210ec0181 sunxi: DT: A64: update device tree files
Import updated device trees from Linux tag v5.9. This picks up new
hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI
files for the Pinebook and the Teres-I, since the ANX6345 bridge is
now supported upstream.

A couple of headers needed updates for recently-added hardware support.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:20 +00:00
Samuel Holland
20f3ee31c3 sunxi: board: Set fdtfile to match the DT chosen by SPL
Previously, fdtfile was always the value in CONFIG_DEFAULT_DEVICE_TREE.
This meant that, regardless of the DT chosen by SPL (either by changing
the header in the image or by the selection code at runtime), Linux
always used the default DT.

By using the name from the SPL header (which, because of the previous
commit, always matches the DT used by U-Boot proper), Linux also sees
the same board as U-Boot/SPL, even if the boot script later loads a DT
from disk.

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Andre: remove no longer needed CONFIG_SPL_LOAD_FIT guards]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17 00:42:20 +00:00
Samuel Holland
41530cf681 sunxi: board: Save the chosen DT name in the SPL header
This overwrites the name loaded from the SPL image. It will be different
if there was previously no name provided, or if a more accurate name was
determined by the board variant selection logic. This means that the DT
name in the SPL header now always matches the DT appended to U-Boot.

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Andre: move function under CONFIG_SPL_LOAD_FIT guard]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17 00:42:20 +00:00
Samuel Holland
8a8b73b6d7 sunxi: board: Add PinePhone DT selection logic
There are two different publicly-released revisions of the PinePhone
hardware, versions 1.1 and 1.2; and they need different device trees.
Since some GPIO pins were rerouted, we can use that to distinguish
between them.

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:20 +00:00
Samuel Holland
54ac5aa174 sunxi: board: Simplify Pine A64 DT selection logic
Instead of using an entirely separate matching algorithm, simply update
the name of the DT we want to match. Enabling this logic does not depend
on the FIT config name, only on the initial guess of the board name.

Importantly, the initial guess must be "sun50i-a64-pine64-plus", because
otherwise the logic would trigger when "sun50i-a64-pine64-lts" was
written to the SPL header.

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:20 +00:00
Samuel Holland
467b7e52ec sunxi: board: Add a helper to get the SPL DT name
This moves the validity checking and typecasts all to one place away
from the string comparison logic, and it detangles the compile-time
and runtime control flow.

The new helper will also be used by U-Boot proper in a future commit.

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Andre: protect new function with CONFIG_SPL_LOAD_FIT]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-17 00:42:20 +00:00
Samuel Holland
2fcd74899c sunxi: board: Use a more descriptive variable name
The variable "cmp_str" always leaves me wondering if it is the DT name
of the current board (yes) or DT name in the FIT config entry (no).

In preparation for expanding the functionality here, rename it to
something that obviously means "this is the DT name we are looking for".

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-17 00:42:20 +00:00
Tom Rini
9324c9a823 Merge tag 'ti-v2021.01-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix Nokia RX-51 boot issues
- Fix CONFIG_LOGLEVEL on K3 devices
- Add phyBOARD REGOR support
2020-11-16 13:42:29 -05:00
Tom Rini
530dcdd07c - Clock fix MMC driver for SM1 based platforms
- sync SOC Ids from Linux 5.10-rc1
 - fix potential build warning on meson_dw_hdmi and meson-g12a-usb2 phy
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl+yUlUACgkQd9zb2sjI
 SdE/qg/+LFGSw26m9u0G9Umfpogy0DW73aJv/MOA3xcEyk7k2Cc6lJ6agk2oll7v
 6Uus8zZXWnPOQ/M2utELGIXBqP9J9i+I6JdGb5t7e0NqpzJqJiVUWIeuuDg9zSqP
 ZZmw3JoNRsMsrUBxJREOM2ERFYhYUkNM0EK7mRzoKs7kKYiJ4TsjeXpuDyxvZQ1o
 La9BGyiAAB+n3hRs1mjQ/lwO5M1nZgSNt3Krw61L9YOV+ahP7+F5FRJksW7Sgv5X
 /3DGm8eqsqVP8mNqZW55yp45uUVE4ZL98yibBLRJONW5/cKjUyGlnxy6Vy6OXDP4
 eXZzYct2nlIMNAbCjB49WoUxxbjg4eLPxSIGGLRdVJliYNOFXIgqEnsFCq7Zlare
 rLQc+TSl0pM+mWKjGchLxMxrA6D5F6ERjIwTukDEjkNQcsXNQkUGC0IKcUM0x7Rf
 N6+eMXBgWYIjgFLXju+B+dZgrDA0BdXs9oaok1idIxBgWqIQ3o4EyIk1sWIHcb/1
 8HL9XEd8oC3G1G4T3Ze++9sUd4MgA3ELOiCQapx7zh/gPDYaYr9yfr2WyRcoMcqK
 Dwlo9os2q0nfOmg6qcmyN5R0flGEDEtBB6/hj2v2mvj9qMA66kSfsMfkqSVbYSZg
 6Kt+ScmKYNpCZiFHX1yUygBHgexvWxxPqhm5eV4gd4/7cNWkCwM=
 =oTd7
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20201116' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Clock fix MMC driver for SM1 based platforms
- sync SOC Ids from Linux 5.10-rc1
- fix potential build warning on meson_dw_hdmi and meson-g12a-usb2 phy
2020-11-16 10:50:32 -05:00
Tom Rini
e1fdb2045a Merge tag 'u-boot-rockchip-20201113' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix USB support for rk3399 Pinebook Pro;
- Fix SPI boot for rk3399 boards other than Bob;
- Fix 32bit boards firmware build without SPL_OPTEE support;
- Fix rockchip display driver license;
2020-11-16 09:50:21 -05:00
Tom Rini
cd0d3749af Minor fixes/improvements to 'patman status'
-----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl+xNpwRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreby6QgA3KcBm+Iwyzkx7wID7R6PVaazKdesyCM6
 Y4dE7kOrXFkCnoXmS5szhrc7YKpWWKBkzHDvRbW9a+n5gTgvujX1OufrcMlEwI9O
 9XqhCmBb2pJ1nfGVxO+qI0hkKI/AgbXw2RedfvJpe2cXkIrzcap/vpmW8S7ri34+
 K9dUxFUMzoUwnY/96asMMF9NgW8AFZ8TE+maUK+B/wXSllb+8FoE7VXKasDkyNer
 qH8YkccU5aeWXYOxv9othxQ1Z1tt/0LX14YfLPbXn0tJhHUfoVSrWTzmqWad8gd4
 1jgSTKkS65Pa/2UqC7apMuGsEexw72kWqewGQxZtCZNphlESWckWmQ==
 =Dheq
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-15nov20' of git://git.denx.de/u-boot-dm

Minor fixes/improvements to 'patman status'
2020-11-15 10:13:22 -05:00
Pali Rohár
914689a204 mtd: OneNAND: Set MTD type
onenand_probe() function is missing to set mtd->type. So set same type as
which sets onenand Linux kernel driver.

After this change 'mtd list' prints correct type instead of 'Unknown'.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Ivaylo Dimitrov
71c27dbaae Nokia RX-51: Make onenand working
set_gpmc_cs0() sets wrong timings and size for Nokia N900 onenand flash.
Fix that by setting the correct timings and size from the board code

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Pali Rohár
56847f3a5e Nokia RX-51: Update test script
Include emmc/nand suffix into bootmenu script names and fix leaking sleep
processes when asynchronously waiting for them. 'wait -n' is not provided
by /bin/sh, so run script under bash.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Pali Rohár
b95ffd3051 Nokia RX-51: During init disable lp5523 led instead of resetting it
After commit d5243359e1 ("OMAP24xx I2C: Add support for set-speed")
U-Boot is unstable to reset lp5523 led. That commit added pooling for i2c
poll ARDY bit which apparently is never set. It is not known what is
happening here.

Purpose of resetting lp5523 led in Nokia RX-51 code is just to turn off
very bright led which is powered on by NOLO and expects next boot image
(kernel or U-Boot) to turn it off.

After testing we observed that just disabling lp5523 led is working fine.

So as a workaround to this ARDY bit i2c issue we disable lp5523 led instead
of resetting it.

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2020-11-15 15:29:40 +05:30
Pali Rohár
94f69f4c14 Nokia RX-51: Fix crashing in U-Boot mmc function omap_hsmmc_stop_clock()
After commit 04a2ea248f ("mmc: disable UHS modes if Vcc cannot be
switched on and off") U-Boot started crashing on Nokia RX-51 while
initializing mmc and caused reboot loop.

It looks like that some clocks were not enabled and this patch fixes U-Boot
mmc crash.

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
2020-11-15 15:29:40 +05:30
Pali Rohár
e4f7592196 Nokia RX-51: Remove old comments from configs/nokia_rx51.h file
These comments are relict for old, now removed config options.
So remove these obsoleted comments too.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Roger Quadros
87c5bc80fc configs: am65/j72x: Set CONFIG_LOGLEVEL to 7
By default CONFIG_LOGLEVEL seems to be set to 4 which is
too low and doesn't show dev_info/dev_notice/dev_warn
messages on console. This has been deliberately set low
globally to be conservative setting across the board due to
primary bootloader size limitations. It is best to tune
per board config as per user needs.

On K3 we have separate SPL and u-boot configs so we
can afford to set u-boot CONFIG_LOGLEVEL to 7.

On AM65 this patch causes u-boot.img size to change from
932KB to 940KB with 1 line additional print during
MMC boot. i.e. details of Net subsystem

"Net: K3 CPSW: nuss_ver: 0x6BA00102 cpsw_ver: 0x6BA80102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000"

Similar 8KB difference was seen on J721E.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2020-11-15 15:29:19 +05:30
Pali Rohár
8d8c181703 Nokia RX-51: Convert to CONFIG_DM_I2C
Use twl4030_i2c_read(), i2c_get_chip_for_busnum() and remove
CONFIG_SYS_I2C.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:26:25 +05:30
Pali Rohár
4fcc084eeb power: twl4030: Add twl4030_i2c_read() function
Function twl4030_i2c_read() is like twl4030_i2c_read_u8() but instead of
single value it rather returns array of values.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-15 15:25:55 +05:30
Parthiban Nallathambi
a1337e3581 ARM: am335x: Add phyBOARD REGOR support
phyBOARD-REGOR is based on phyCORE AM335x R2 SoM (PCL060).

CPU  : AM335X-GP rev 2.1
Model: Phytec AM335x phyBOARD-REGOR
DRAM:  512 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0
eth0: ethernet@4a100000

Working:
 - Eth0
 - i2C
 - MMC/SD
 - NAND
 - UART
 - USB (host)

Device trees were taken from Linux mainline:
commit c4d6fe731176 ("Linux 5.9.0")

Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-15 15:14:04 +05:30
Heinrich Schuchardt
a3e458524c cros_ec: Handling EC_CMD_GET_NEXT_EVENT
With commit 6900797678 ("cros_ec: Support keyboard scanning with
EC_CMD_GET_NEXT_EVENT") check_for_keys() tries to read keyboard
strokes using EC_CMD_GET_NEXT_EVENT. But the sandbox driver does
not understand this command. We need to reply with
-EC_RES_INVALID_COMMAND to force check_for_keys() to fall back to
use EC_CMD_MKBP_STATE. Currently the driver prints

    ** Unknown EC command 0x67

in this case. With the patch the message is suppressed.

In a future patch we should upgrade the sandbox driver to provide
EC_CMD_GET_NEXT_EVENT support.

Fixes: 6900797678 ("cros_ec: Support keyboard scanning with EC_CMD_GET_NEXT_EVENT")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 15:23:41 -07:00
Simon Glass
4cb862fe28 cros_ec: Increase command timeout for flash erase
Erasing the flash can take over a second on some devices and the EC is
not responsive during this time. Update the timeout to 5 seconds to cope
with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
d237e9c7c0 cros_ec: Correct collection of EC hash
The EC now requires that the offset field be set correctly when checking
on hash status. Update the code to handle this. Use the same message
struct in both functions to reduce stack space.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
fcbec650e6 patman: Add a Series-patchwork-url option
Add a commit tag to allow the Patchwork URL to be specified in a commit.
This can be handy for when you submit code to multiple projects but don't
want to use the -p option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
a55be354c0 patman: Add a setting for the Patchwork URL
Add an argument to allow specifying the the patchwork URL. This also adds
this feature to the settings file, either globally, or on a per-project
basis.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
7cbf02e94d patman: Allow specifying the patchwork URL
Add a new argument to allow the URL of the patchwork server to be
speciified. For now this is hard-coded in the main file, but future
patches will move it to the settings file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
3145b63513 patman: Update defaults in subparsers
At present values from the settings file are only applied to the main
parser. With the new parser structure this means that some settings are
ignored.

Update the implementation to set defaults across the main parser and all
subparsers. Also fix up the comments, since ArgumentParser is being used
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
53336e6ca8 patman: Correct Change-Ids error message args
The arguments of this error are incorrectly formatted. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Simon Glass
4600767d29 patman: Refactor how the default subcommand works
At present patman tries to assume a default subcommand of 'send', to
maintain backwards compatibility. However it does not cope with
arguments added to the default command, so for example 'patman -t'
does not work.

Update the logic to handle this. Also update the CC command to use 'send'
explicitly, since otherwise patman gets confused with the patch-filename
argument.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-14 15:23:41 -07:00
Tom Rini
de865f7ee1 Pull request for UEFI sub-system for efi-2021-01-rc3
A part of the EFI_TCG2_PROTOCOL is implemented.
 A unit test is supplied.
 
 The following bugs are fixed:
 
 * incorrect buffer size in efi_file_setinfo() leading to creash in SCT
 * a crash in UEFI selftest on the sandbox due to removed drivers
 * missing newlines in log message for the UEFI RNG driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl+vWMQACgkQxIHbvCwF
 GsQoQA//fDPn/qWP3zQw/jWecZLNs3AexDKQIEmn4T/1b179N1v5B8y6axD/Km0Q
 MNHdYQIy3GEYS1E1fre28tsgqWnY7tlGi5oeYw9v4QT0ahMzuuzIrsq7J7UhNAgo
 4nXXQuL9GvQvObO786VFDmekndAaehfgqoZjC1qwn6d8CvQYQex9Wor966Y0OQ4z
 RsWVirWoIkBlC+02bAtCFWFmyPgHYilNACC2EZlxRGcTmYWObvLQMAko4reRJ08Y
 IJbR2glqmrgWkkEe7PpU/lz9r1IvWTSDFIlG8HgQ7HqScQXDqmXyDARuj4T/DxuT
 /VfyNwxD5+aHCyZtxcgQ82RvP+trNkgvz9wuUbmg3IBOQ7wFPtk/g9243ySKalM5
 U3PmdaG6K/XaZ5UDnpK08FvGU85/9LQJOnGnHSUTfjaDgYBeV0QUYGzFFeyn2hW9
 TFdzBjl2KJv2I19fCmCrGD+jGtuRqUqDeeY3UCBv3T9ioXeV2Jg+eziASAejDEZQ
 w757nxqI5upSlo/uX8l9yybvlMlEXoyj6w7THxqZKItuiwWcE69aV6HNUHKLMpoD
 AsFr6/9y4duqaoYWzGIsjcEGjCzGhFAybrlVqN1MrfE77jCk9WEePFw452+Tjhp0
 ch4eIUoh0unZZcamcPBo+JLngKgYW0HS6OKXh0PWMucGLn7XW8g=
 =/DST
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc3

A part of the EFI_TCG2_PROTOCOL is implemented.
A unit test is supplied.

The following bugs are fixed:

* incorrect buffer size in efi_file_setinfo() leading to creash in SCT
* a crash in UEFI selftest on the sandbox due to removed drivers
* missing newlines in log message for the UEFI RNG driver
2020-11-14 09:47:33 -05:00
Heinrich Schuchardt
af69267c32 efi_selftest: provide unit test for the EFI_TCG2_PROTOCOL
Provide a minimal test for the EFI_TCG2_PROTOCOL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14 05:05:46 +01:00