Commit graph

77315 commits

Author SHA1 Message Date
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Tom Rini
068415eade Xilinx changes for v2022.04-rc1
gpio:
 - Add modepin driver
 
 net:
 - Save random mac addresses to eth variable
 
 zynqmp gem:
 - Add support for mdio bus DT description
 - Add support for reset and SGMII phy configuration
 - Reduce timeout for MDIO accesses
 
 zynqmp clk:
 - Fix clock handling for gem and usb
 
 phy:
 - Add zynqmp phy/serdes driver
 
 serial:
 - Add one missing compatible string
 
 microblaze:
 - Symbol alignement
 - SPL fixups
 - Code cleanups
 
 zynqmp:
 - Various dt changes, DP pre-reloc, gem resets, gem clocks
 - Switch SOM to shared psu configuration
 - Move dcache handling to firmware driver
 - Workaround gmii2rgmii DT description issue
 - Enable broadcasts again
 - Change firmware enablement logic
 - Small adjustement in firmware driver
 
 versal:
 - Support new mmc@ DT nodes
 - Fix run time variable handling
 - Add missing I2C_PMC ID for power domain
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYeg7sQAKCRDKSWXLKUoM
 IVhJAKCAiNx/joEeFBJ0XgThtJzFhCjdMwCfYKY9Ewz4L0n2I56lDgR3UJroct0=
 =HtB+
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc1

gpio:
- Add modepin driver

net:
- Save random mac addresses to eth variable

zynqmp gem:
- Add support for mdio bus DT description
- Add support for reset and SGMII phy configuration
- Reduce timeout for MDIO accesses

zynqmp clk:
- Fix clock handling for gem and usb

phy:
- Add zynqmp phy/serdes driver

serial:
- Add one missing compatible string

microblaze:
- Symbol alignement
- SPL fixups
- Code cleanups

zynqmp:
- Various dt changes, DP pre-reloc, gem resets, gem clocks
- Switch SOM to shared psu configuration
- Move dcache handling to firmware driver
- Workaround gmii2rgmii DT description issue
- Enable broadcasts again
- Change firmware enablement logic
- Small adjustement in firmware driver

versal:
- Support new mmc@ DT nodes
- Fix run time variable handling
- Add missing I2C_PMC ID for power domain
2022-01-19 11:43:44 -05:00
Tom Rini
93ee2bbe14 doc: samsung: axy17lte: Fix underlines
A few sections had underlines that were too short, correct.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-19 11:06:07 -05:00
Heinrich Schuchardt
f5e9035043 doc: printf() codes
Document the format specifier codes used by U-Boot's printf()
implementation.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:18:09 +01:00
Heinrich Schuchardt
3280eaad18 doc: fix description of build dependencies for Alpine Linux
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:18:09 +01:00
Ilias Apalodimas
8699af63b8 lib/crypto: Enable more algorithms in cert verification
Right now the code explicitly limits us to sha1,256 hashes with RSA2048
encryption.  But the limitation is artificial since U-Boot supports
a wider range of algorithms.

The internal image_get_[checksum|crypto]_algo() functions expect an
argument in the format of <checksum>,<crypto>.  So let's remove the size
checking and create the needed string on the fly in order to support
more hash/signing combinations.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
38040a63a3 efi_loader: printing TCG2 protocol GUID
We support the TCG2 protocol. Allow command efidebug to print it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
7884a0986d efi_selftest: implement printing GUIDs
The ESRT test may try to print a GUID if an error occurs.
Implement the %pU print code.

Correct the ESRT test to use %pU instead of %pUl to avoid the output
of character 'l'.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
983a5a2e72 cmd: printenv: simplify printing GUIDs
Use "%pS" to print text representations of GUIDs.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
ce00a7401a efi_loader: use %pUs for printing GUIDs
For printing GUIDs with macro EFI_ENTRY use %pUs instead of %pUl to provide
readable debug output.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
3adae64220 cmd: efidebug: simplify printing GUIDs
Use "%pS" to print text representations of GUIDs.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
04641c1407 test: add test for %pUs
Add a unit test for the %pUs printf code.

Use ut_asserteq_str() for checking string results.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
d3adee1db8 sandbox: imply PARTITION_TYPE_GUID
CONFIG_PARTITION_TYPE_GUID=y is needed for testing some GPT related
functionality.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
a4492eeee1 disk: simplify part_print_efi()
Use printf code %pUs to print the text representation of the partition type
GUID.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
0487238120 lib: printf code %pUs for GUID text representation
In different places text representations are used for GUIDs, e.g.

* command efidebug
* command part list for GPT partitions

To allow reducing code duplication introduce a new printf code %pUs.
It will call uuid_guid_get_str() to get a text representation. If none is
found it will fallback to %pUl and print a hexadecimal representation.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Heinrich Schuchardt
c1528f324c lib: compile uuid_guid_get_str if CONFIG_LIB_UUID=y
Currently uuid_guid_get_str() is only built if
CONFIG_PARTITION_TYPE_GUID=y.

To make it usable for other GUIDs compile it if CONFIG_LIB_UUID=y.
The linker will take care of removing it if it is unused.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Michal Simek
11c07719d5 firmware: zynqmp: Do not report error if node is already configured
Power domain driver sends PM fragment to PMUFW. It is sent for every node
which is listed in DT. But some nodes could be already enabled but driver
is not capable to find it out. That's why it blinly sents request for every
listed IP. When PMUFW response by XST_PM_ALREADY_CONFIGURED error code
there is no need to show any error message because node is already enabled.
That's why cover this case with message when DEBUG is enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/8c15ef0b68cf191f693d3d010f70ac24cfd8171f.1642163135.git.michal.simek@xilinx.com
2022-01-19 15:14:29 +01:00
Michal Simek
12662e7034 firmware: zynqmp: Move loading message to debug
Power domain driver is using this function for every IP which is PD listed.
This can end up with a lot of messages which end up in boot log. That's why
show it only in EL3 as was used in past.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/d73fc8bc663110b6e8d5e70fdb6435d1199e9db8.1642163135.git.michal.simek@xilinx.com
2022-01-19 15:14:29 +01:00
Tom Rini
b24b201b60 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
- Updates for a{3,7}y17lte platforms
2022-01-19 08:09:34 -05:00
Michal Simek
71efd45a5f arm64: zynqmp: Change firmware dependency
In case of mini U-Boot configurations there is no need to enable firmware
driver which just consume space for nothing. That's why add an option to
disable it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/d439399160ff3374f2b39f54f7dd70fa8c8bfea0.1642162121.git.michal.simek@xilinx.com
2022-01-19 11:36:11 +01:00
Shravya Kumbham
d10807a06b arm64: xilinx: dts: Add dma properties to fix dtbs_check warnings
Update dma name and add #dma-cells properties to fix dtbs_check
warnings.

Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/fedbf83fd5c682b4d61905d2cb790d33c2f079d6.1642160644.git.michal.simek@xilinx.com
2022-01-19 11:33:50 +01:00
Manish Narani
1d70cc7789 arm64: zynqmp: Update USB node handle from dwc3 to usb
The DWC3 bindings require all USB node handles to be '^usb@[0-9a-f]+$'.
Update the same in ZynqMP device tree.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/26fc2777eeb92cb5cb1d558d7c19cfb54ac42d0c.1642160613.git.michal.simek@xilinx.com
2022-01-19 11:33:03 +01:00
Michal Simek
59b21d2aea arm64: zynqmp: Change compatible strings for cadence uart
Based on Linux kernel DT binding there should be different compatible
strings used that's why align zynqmp.dtsi with it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/e2404ccd22fd97fe6020be0b3b6eb3c8677f55b0.1642160583.git.michal.simek@xilinx.com
2022-01-19 11:25:54 +01:00
Tom Rini
6a685753ce Merge branch '2022-01-18-platform-updates'
- cubieboard7 MMC support, AST2600 MAC support
2022-01-18 16:07:33 -05:00
Tom Rini
60435ca4da miiphy.h: Remove CONFIG_DM_xxx guards
Function prototypes must not be guarded with ifdef tests.  Doing so
prevents us from doing:
if (CONFIG_IS_ENABLED(FOO))
  func();

as that results in a warning when CONFIG_FOO is not enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-18 13:38:00 -05:00
Dylan Hung
e559193968 clk: ast2600: Revise MII interface delay
The clock delay of the RMII/RGMII interface is controlled by SCU340~35C.
These values are obtained by measurement and experiments so we simply
use macro to define them.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-18 12:48:17 -05:00
Dylan Hung
0810de5769 configs: ast2600: enable DM_MDIO and MDIO driver
Enable DM_MDIO and Aspeed MDIO driver for AST2600 EVB.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-18 12:48:17 -05:00
Dylan Hung
abc75897ca ARM: dts: ast2600: Add MDIO devices
There are 4 MDIO bus controllers in AST2600 SOC.  Each of them can
connect to one or more PHY chips and is flexible to work with the 4 MAC
devices in AST2600.  On AST2600 EVB, MDIO 0,1,2,3 connect to the PHY
chips used by MAC 0,1,2,3 respectively.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-18 12:48:17 -05:00
Dylan Hung
ac4fda7bc2 net: ftgmac100: Add Aspeed AST2600 support
Add support of the MAC controller of Aspeed AST2600 SOC.  The MAC
controller is the same with AST2500, except it has stand-alone MDIO
hardware block.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-18 12:48:17 -05:00
Dylan Hung
9c27ce781d net: ftgmac100: Add DM_MDIO support
Add support for DM_MDIO to connect to PHY.  For the systems that have a
stand-alone MDIO hardware block, enable CONFIG_DM_MDIO to use driver
model for MDIO devices.

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-18 12:48:17 -05:00
Amit Singh Tomar
94a43f7dc6 configs: Enable mmc support
This commits enables mmc on the Actions Cubieboard7 board.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2022-01-18 12:48:17 -05:00
Amit Singh Tomar
57a91c3c9e mmc: actions: add MMC driver for Actions OWL S700/S900
This commit adds support for MMC controllers found on Actions OWL
SoC platform(S700/S900).

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2022-01-18 12:48:17 -05:00
Amit Singh Tomar
3739cd58a4 ARM: dts: s700: add MMC/SD controller node
This patch adds node for mmc/sd controller found on Action Semi OWL
S700 SoC.

Since, upstream Linux binding has not been merged for S700 MMC/SD
controller, Changes are put in u-boot specific dtsi file.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2022-01-18 12:48:17 -05:00
Amit Singh Tomar
a7e7baea0a ARM: dts: sync Actions Semi S700 DT from Linux v5.16-rc3
This Synchronizes the Actions Semi S700 SoC DT changes from
commit "g58e1100fdc59" ("Linux v5.16-rc3").

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2022-01-18 12:48:17 -05:00
Amit Singh Tomar
05c2ff7dc6 clk: actions: Add SD/MMC clocks
This commit adds SD/MMC clocks, and provides .set/get_rate callbacks
for SD/MMC device present on Actions OWL S700 SoCs.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2022-01-18 12:48:17 -05:00
Amit Singh Tomar
234c1672a1 clk: actions: Introduce dummy get/set_rate callbacks
This commit introduces get/set_rate callbacks, these are dummy at
the moment, and can be used to get/set clock for various devices
based on the clk id.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2022-01-18 12:48:17 -05:00
Tom Rini
115090ef59 Merge branch '2022-01-17-assorted-updates'
- musb gadget pinctrl-single, pxa3xx nand bugfixes
- btrfs BLAKE2 hash support and another btrfs fix
- board_r cleanups
2022-01-18 12:31:42 -05:00
AJ Bagwell
1041eae420 pinctrl: single: add support for pinctrl-single, pins when #pinctrl-cells = 2
Changes to the am33xx device (33e9021a) trees have been merged in from
the upstream linux kernel which now means the device tree uses the new
pins format (as of 5.10) where the confinguration can be stores as a
separate configuration value and pin mux mode which are then OR'd
together.

This patch adds support for the new format to u-boot so that
pinctrl-cells is now respected when reading in pinctrl-single,pins
Signed-off-by: Anthony Bagwell <anthony.bagwell@hivehome.com>
2022-01-18 08:31:02 -05:00
Qu Wenruo
7c075433fe fs/btrfs: fix a bug that U-boot fs btrfs implementation doesn't handle NO_HOLE feature correctly
[BUG]
When passing a btrfs with NO_HOLE feature to U-boot, and if one file
contains holes, then the hash of the file is not correct in U-boot:

 # mkfs.btrfs -f test.img	# Since v5.15, mkfs defaults to NO_HOLES
 # mount test.img /mnt/btrfs
 # xfs_io -f -c "pwrite 0 4k" -c "pwrite 8k 4k" /mnt/btrfs/file
 # md5sum /mnt/btrfs/file
 277f3840b275c74d01e979ea9d75ac19  /mnt/btrfs/file
 # umount /mnt/btrfs
 # ./u-boot
 => host bind 0 /home/adam/test.img
 => ls host 0
 <   >      12288  Mon Dec 27 05:35:23 2021  file
 => load host 0 0x1000000 file
 12288 bytes read in 0 ms
 => md5sum 0x1000000 0x3000
 md5 for 01000000 ... 01002fff ==> 855ffdbe4d0ccc5acab92e1b5330e4c1

The md5sum doesn't match at all.

[CAUSE]
In U-boot btrfs implementation, the function btrfs_read_file() has the
following iteration for file extent iteration:

	/* Read the aligned part */
	while (cur < aligned_end) {
		ret = lookup_data_extent(root, &path, ino, cur, &next_offset);
		if (ret < 0)
			goto out;
		if (ret > 0) {
			/* No next, direct exit */
			if (!next_offset) {
				ret = 0;
				goto out;
			}
		}
		/* Read file extent */

But for NO_HOLES features, hole extents will not have any extent item
for it.
Thus if @cur is at a hole, lookup_data_extent() will just return >0, and
update @next_offset.

But we still believe there is some data to read for @cur for ret > 0
case, causing we read extent data from the next file extent.

This means, what we do for above NO_HOLES btrfs is:
- Read 4K data from disk to file offset [0, 4K)
  So far the data is still correct

- Read 4K data from disk to file offset [4K, 8K)
  We didn't skip the 4K hole, but read the data at file offset [8K, 12K)
  into file offset [4K, 8K).

  This causes the checksum mismatch.

[FIX]
Add extra check to skip to the next non-hole range after
lookup_data_extent().

Signed-off-by: Qu Wenruo <wqu@suse.com>
2022-01-18 08:31:02 -05:00
Qu Wenruo
1617165a17 fs/btrfs: add dependency on BLAKE2 hash
Now btrfs can utilize the newly intorudced BLAKE2 hash.

Signed-off-by: Qu Wenruo <wqu@suse.com>
2022-01-18 08:31:02 -05:00
Qu Wenruo
7c3fd5c25d lib: add BLAKE2 hash support
The code is cross-ported from BLAKE2 reference implementation
(https://github.com/BLAKE2/BLAKE2).

With minimal change to remove unused macros/features.

Currently there is only one user inside U-boot (btrfs), and since it
only utilize BLAKE2B, all other favors are all removed.

Signed-off-by: Qu Wenruo <wqu@suse.com>
[trini: Rename ROUND to R to avoid clash with <linux/bitops.h>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-18 08:31:02 -05:00
Ovidiu Panait
ae435aefbc common: board_r: drop ifdefs around header includes
Drop the remaining ifdefs around header includes, to fix an old TODO.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2022-01-18 08:31:02 -05:00
Ovidiu Panait
fd765b0eeb common: board_r: include asm-generic/gpio.h
Not all architectures define <asm/gpio.h> and even on those that do, the
header cannot be included for all boards without causing various build
failures.

Since common/board_r.c only needs gpio_hog_probe_all() declaration, include
<asm-generic/gpio.h> and drop the associated ifdef.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2022-01-18 08:31:02 -05:00
Ovidiu Panait
2fd81be11c common: board_r: move init_addr_map() to init.h
asm/mmu.h include is currently guarded by CONFIG_ADDR_MAP ifdef because
the header is only present on arm and powerpc. In order to remove the
dependency on this header and the associated ifdef, move init_addr_map()
declaration to init.h, since it is only called during the common init
sequence.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2022-01-18 08:31:02 -05:00
Ovidiu Panait
1b212bb9f4 common: board_r: drop initr_addr_map wrapper
Add a return value to init_addr_map and use it directly in the
post-relocation init sequence, rather than using a wrapper stub.

Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2022-01-18 08:31:02 -05:00
Ovidiu Panait
78fc0395c0 common: board_r: drop initr_kgdb wrapper
Add a return value to kgdb_init and use it directly in the post-relocation
init sequence, rather than using a wrapper stub. Also, move the "KGDB"
print message inside kgdb_init().

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2022-01-18 08:31:02 -05:00
Ovidiu Panait
485c90c06b common: remove bedbug debugger support
Commit 98f705c9ce ("powerpc: remove 4xx support") removed (in 2017) the
last code that made use of bedbug debugger support. Since there aren't
any boards left that define either CONFIG_CMD_BEDBUG or a real
bedbug_init(), drop this feature from u-boot.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-18 08:31:02 -05:00
Ovidiu Panait
027b0e9c16 common: spl: move armv7m-specific code to spl_perform_fixups()
Factor out armv7m fragment to spl_perform_fixups(), which is an arch/board
specific function designed for this purpose.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2022-01-18 08:31:02 -05:00
qianfan Zhao
ea9733ac4c drivers: musb_gadget: Save endpoint desc to usb_ep->desc
Fix fastboot flash bug.

If the downloading file size is equal to the partition size, "fastboot
flash" can't work, at least in sunxi platform, because used an
uninitalized point: ep->desc.

This patch also fixed 'data abort' bug in am335x platform.

Reproduce: fastboot flash loader1 spl/sunxi-spl.bin.

Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2022-01-17 14:45:24 -05:00
Robert Marko
429866e845 mtd: nand: pxa3xx: set mtd->dev
Currently the pxa3xx driver does not set the udevice in the mtd_info
struct and this prevents the mtd from parsing the partitions via DTS
like for SPI-NOR.

So simply set the mtd->dev to the driver udevice.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-17 14:45:24 -05:00