Commit graph

37 commits

Author SHA1 Message Date
Andrey Zhizhikin
1289ff7bd7 imx8m: lock id_swap_bypass bit in tzc380 enable
According to TRM for i.MX8M Nano and Plus, GPR10 register contains lock
bit for TZASC_ID_SWAP_BYPASS bit. This bit is required to be set in
order to avoid AXI bus errors when GPU is enabled on the platform.
TZASC_ID_SWAP_BYPASS bit is alread set for all imx8m applicable
derivatives, but is missing a lock settings to be applied.

Set the TZASC_ID_SWAP_BYPASS_LOCK bit for those derivatives which have
it implemented.

Since we're here, provide also names to bits from TRM instead of using
BIT() macro in the code.

Fixes: deca6cfbf5 ("imx8mn: set BYPASS ID SWAP to avoid AXI bus errors")
Fixes: a07c718129 ("imx8mp: set BYPASS ID SWAP to avoid AXI bus errors")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Peng Fan <peng.fan@nxp.com>
2022-02-05 15:49:01 +01:00
Ye Li
4a837d433c arm: imx8mq: Add USB clock init function
Add clock function to setup relevant clocks for USB3.0 controllers and
PHYs on i.MX8MQ

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Patrick Wildt <patrick@blueri.se>
2021-07-17 13:12:23 +02:00
Ye Li
41b230bf29 iMX8M: Add support to enable CONFIG_IMX_HAB
Add some SOC level codes and build configurations to use HAB lib for
CONFIG_IMX_HAB (secure boot), like adding the SEC_CONFIG fuse, enable
fuse driver, CAAM clock function, and add CAAM secure RAM to MMU table.

The FSL_CAAM is temporally not enabled for iMX8M when CONFIG_IMX_HAB is set,
because we don't need the CAAM driver for SPL.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Peng Fan
ac3a16f850 imx8m: add regs used by CAAM
Add regs used by CAAM

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Peng Fan
0d77b4522f arch: mach-imx: imx8m: fix unique_id read error for imx8mp
The value of Unique ID in uboot and kernel is different for iMX8MP:

serial#=02e1444a0002aaff
root@imx8mpevk:/sys/devices/soc0# cat soc_uid
D699300002E1444A

The reason is that Fuse Addresses of Unique ID of iMX8MP are 0x420 and
0x430.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Marek Vasut
fb4c3387bc ARM: imx: Add missing FEC ethernet quirk for MX8M
The MX8M also contains a gigabit MAC, so define FEC_QUIRK_ENET_MAC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-03-01 10:21:36 +01:00
Peng Fan
374866a724 imx8m: clock: add type of set_clk_eqos
Add type of set_clk_eqos to make it could be used by other files.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:30 +01:00
Peng Fan
48b90f86c5 imx: imx8mp_evk: enable eth support
Add board code to configure the network interface
Add net defconfig

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-23 11:30:30 +01:00
Simon Glass
8a8d24bdf1 dm: treewide: Rename ..._platdata variables to just ..._plat
Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Peng Fan
ece7844d8f imx8mq: fix SSCG_PLL_REFCLK_SEL_x
Fix SSCG_PLL_REFCLK_SEL_x, the offset starts from 0, not 16

Reported-by: Coverity 3448860
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17 14:40:10 +02:00
Peng Fan
d81e8cf6ea imx8mq: fix FRAC_PLL_REFCLK_SEL_MASK
Coverity reported dead code, however it is FRAC_PLL_REFCLK_SEL_MASK
was wrongly set.

Reported-by: Coverity 10045172
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17 14:40:04 +02:00
Peng Fan
7a42bf0489 imx8m: power down fused cores
For non-Quad SoCs, the fused cpu cores could be powered down in SPL
to save power.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:47 +08:00
Oliver Chen
b335966958 drivers: ddr: imx Workaround for i.MX8M DDRPHY rank to rank issue
Add logic to automatically update umctl2's setting based
on phy training CDD value for rank to rank space issue

Acked-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Oliver Chen <Oliver.Chen@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
Sherry Sun
f3acb02386 drivers: ddr: imx8mp: Add inline ECC feature support
the DRAM Controller in i.MX8MP will support a feature called "Inline ECC".
This is supported for all 3 supported DRAM technologies (LPDDR4, DDR4 and
DDR3L). When this feature is enabled by software, the DRAM Controller
reserves 12.5% of DRAM capacity for ECC information, and presents only
the non-ECC portion (lower 87.5% of the installed capacity of DRAM) to
the rest of the SoC.
The DRAM memory can be divided into 8 regions so that if a use case only
requires ECC protection on a subset of memory, then only that subset of
memory need support inline ECC. If this occurs, then there is no
performance penalty accessing the non-ECC-protected memory (no need to
access ECC for this portion of the memory map). This is all configured
with the DRAM Controller.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Peng Fan
ef56281cf3 imx: regs: add more fuse bank structure
Add more fuse bank structure for use.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
1c97fcda7f imx8mm: clock: fix fracpll decode issue
The fracpll decoding is using the bit definitions for int pll. Most of
them are same, but the CLKE bit is different. Fix the wrong CLKE_MASK
for fracpll and correct all bit definitions in fracpll decoding.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Peng Fan
712a341c76 imx8mq: Set ARM core clock directly from ARM PLL
For ARM core clock, there are two input branches, and can select via mux:
one from ARM PLL directly, second from CCM A53 clock root.

Currently we are using second branch. But IC confirmed the CCM A53 root
signoff timing is 1Ghz, so we should switch to input from ARM PLL directly.

This patch fixes the CORE SEL slice configuration and switch ARM clock
to ARM PLL.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
6b87b3f4dc imx8m: update clock root and fix core_sel
Update clock root table to let it be easy to configure clock at
very early stage. Also the core_sel mux parent should be A53 CLK
root and ARM PLL.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:21 +02:00
Peng Fan
b7590fc43c imx: imx8mp: add pin header file
Add pin header file for i.MX8MP

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Peng Fan
db4510ff8e imx: imx8mp: add basic clock
i.MX8MP has similar architecture as i.MX8MN, but it has different
clk root and index, so add that to make i.MX8MP could use
the non-dm clock driver.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Frieder Schrempf
83083febf5 ddr: imx8m: Return error values from LPDDR4 training
In cases when the same SPL should run on boards with i.MX8MM, that
differ in DDR configuration, it is necessary to try different
parameters and check if the training done by the firmware suceeds or
not.

Therefore we return the DDR training/initialization success to the
upper layer in order to be able to retry with different settings if
necessary.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2020-01-07 10:26:57 +01:00
Peng Fan
59e9da7af0 imx8mn: add pin header
Add pin header for i.MX8MN

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
f4c36ab6ee imx8m: add clk support for i.MX8MN
i.MX8MN has similar architecture with i.MX8MM, so it could reuse
the clock code of i.MX8MM, but i.MX8MN has different CCM root
configurations, so need a separate root entry.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
2dfecdd1ed imx: imx8mq: add init_nand_clk
Add init_nand_clk to enable gpmi nand clock. Since i.MX8MQ not use CCF,
so we still use legacy mode to configure the clock.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Peng Fan
5f24d0cb9c imx8m: add clk support for i.MX8MM
Introduce clk implementation for i.MX8MM, including pll configuration,
ccm configuration. Mostly will be done clk dm driver,
but such as DRAM part, we still use non clk dm driver, because we
have limited sram.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
8838cdf10d imx8m: restructure clock.h
i.MX8MQ and i.MX8MM use different analog pll design, but they
share same ccm design.
Add clock_imx8mq.h for i.MX8MQ
keep common part in clock.h

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
e246b7ad74 imx8m: add pin header for i.MX8MM
Add pin header file for i.MX8MM

To IMX8MM_PAD_NAND_WE_B_USDHC3_CLK, IOMUX_CONFIG_SION needs to be
selected.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
20ebb4fa75 imx8m: update imx-regs for i.MX8MM
i.MX8MM has similar architecture with i.MX8MQ, but it has totally
different PLL design and register layout change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
4800df0cb0 imx8m: imx-regs: drop unused register definitions
Drop unused register definitions and structures for i.MX8MQ

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Patrick Wildt
d08a194871 imx: add support for i.MX8MQ power domain controller
Add support for the power domain controller that's used on the
i.MX8MQ.  This will be needed to be able to power on the PCIe
controller.  Bindings taken from Linux, driver implementation
taken from the i.MX8 power domain controller and adjusted for
the i.MX8M SoC.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08 16:36:36 +02:00
Peng Fan
16529ff255 imx: define ARCH_MXC for i.MX8/8M/7ULP
Without this definition, fsl_esdhc will access reserved registers
on i.MX chips, so define ARCH_MXC to fix it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-11 10:43:00 +02:00
Peng Fan
416f63194b imx8m: ddr: removed unused macros
Remove unused DDRC register macros.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
e3963c0943 drivers: ddr: introduce DDR driver for i.MX8M
Introduce DDR driver for i.MX8M. The driver will be used by SPL to
initialze DDR PHY and DDR Controller.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
389023ced0 imx: imx8m: add lpddr4 header file
Introduce lpddr4 header file

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
b3e5cb8d35 imx: imx8m: clock refactor dram pll part
Refactor dram_pll_init to accept args to configure different pll freq.
Introduce dram_enable_bypass and dram_disable_bypass

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
cd357ad112 imx: rename mx8m,MX8M to imx8m,IMX8M
Rename mx8m,MX8M to imx8m,IMX8M

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jon Nettleton <jon@solid-run.com>
2019-01-01 14:12:18 +01:00