Commit graph

680 commits

Author SHA1 Message Date
Tom Rini
bb3694d5b1 - doc: fix qemu-mips build instructions
- MIPS: add GPIO, CLK and SPI drivers for Octeon MIPS64
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl8oYscACgkQKPlOlyTy
 XBhMSxAAtCdGKSU1cBLvLhoHi9zHfJ9fXKwrSTikSWJ5SotinY8ICdR95PDDChnv
 BL5FH1TYMi6cwLxoT7XuOzSjUvYFx+y7drT5Cj78Udzfw3J0OF2mVhJTLkV0adnK
 beT6srAgM/Sli19ewXquWqzE/s9fSwjjNfZH43ySxDb3S35llYcBaoOIZ+o1EUO5
 So8Vvi31W5H6MpxioTGGH9CJLHU7Xa6hCeLg/h6P1AUAyyQICFMraFfG6nt90k5k
 2z0Lc7D5I5JQi074nAChSo/D91p75Z5pLYx+h3MFWjwafr5QddqjZ/hL+gixubWg
 yW0QX4TA92X1p/wXioYleTldLbbhz23OvjYJyfvmEsNIvTuAj/opi+Im5Lg0T0TT
 QJPNenxKwnURfYwI2woSk6xFBZqMgZ5eo1FacTUebRCkkW/YTKpcOn7K2pNzQfJn
 c/rKo9/rJVyb+1X/EglUEJ07ARUWRTq8dgOYbGe25qqTjYlwES4xd4AQrqQaYpkF
 OGzMGezzw5HejtqMa1x01VsPQZgcKTTS3gmnLYkfs8j7WD0+f5V2Ba9gnrblSXeR
 Vwfc8yWU0fIYW7I4kX9hsugqEqUOlXeUJ1yylNdeenBn6Hvs4Ros5GgNco1n8lhi
 lcEy/DzAcVw5cAZafeR0ZIMj2r3hTs4jW+TUFKEuuNW9W+KV2ZI=
 =Kv/C
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2020-08-03' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips

- doc: fix qemu-mips build instructions
- MIPS: add GPIO, CLK and SPI drivers for Octeon MIPS64
2020-08-04 11:07:16 -04:00
Simon Glass
dcd7c906d0 mscc: Drop dm.h header file
This header file should not be included in other header files. Remove it
from each one and use a forward declaration instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03 22:19:54 -04:00
Stefan Roese
1015540d70 mips: octeon: Update Octeon Kconfig
This patch selects DM_SPI & DM_I2C for MIPS Octeon. DM_GPIO, DM_SERIAL
and DM_ETH are already selected.

Additionally the selections are now alphabetically sorted.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:14:48 +02:00
Stefan Roese
9044ed2c68 mips: octeon: mrvl, octeon-ebb7304.dts: Add SPI flash DT node
Add the SPI flash DT node for the EBB7304.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:14:48 +02:00
Stefan Roese
1032491904 mips: octeon: mrvl,cn73xx.dtsi: Add SPI DT node
Add the Octeon SPI DT node to the dtsi file.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:14:48 +02:00
Stefan Roese
a078c65172 mips: octeon: dts: Add Octeon clock driver DT nodes
This patch adds the DT nodes for the Octeon clock support via the
common clk_ API.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:11:41 +02:00
Stefan Roese
7ab932825d mips: octeon: dts: Add I2C DT nodes
Add I2C DT nodes to the Octeon dts / dtsi files.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:11:41 +02:00
Stefan Roese
fad5ec5ecd mips: octeon: mrvl,cn73xx.dtsi: Add GPIO DT nodes
Add the Octeon GPIO DT node to the dtsi file.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03 21:11:41 +02:00
Stefan Roese
5fef24c912 mips: octeon: Add minimal Octeon 3 EBB7304 EVK support
This patch adds very basic minimal support for the Marvell Octeon 3
CN73xx based EBB7304 EVK. Please note that the basic Octeon port does
not support DDR3/4 initialization yet. To still use U-Boot on with this
port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot
to the prompt on this board.

Supported devices:
- UART
- reset
- CFI parallel NOR flash

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Stefan Roese
e9609dc38b mips: octeon: use mips_mach_early_init() to copy to L2 cache
This patch adds the code to copy itself from bootrom location to a
different location (TEXT_BASE) to the Octeon platform. Its used in
this case to copy the complete U-Boot image into L2 cache, which
greatly improves the bootup time - especially in regard to the
very long and complex DDR4 init code.

The Kconfig symbol CONFIG_MIPS_MACH_EARLY_INIT is enabled with this
patch for Octeon.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Stefan Roese
ff7e4f030b mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file
This patch adds the base dtsi file for the Octeon 3 cn73xx SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Aaron Williams
0dc4ab9c43 mips: octeon: Initial minimal support for the Marvell Octeon SoC
This patch adds very basic support for the Octeon III SoCs. Only
CFI parallel NOR flash and UART is supported for now.

Please note that the basic Octeon port does not include the DDR3/4
initialization yet. This will be added in some follow-up patches
later. To still use U-Boot on with this port, the L2 cache (4MiB on
Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the
prompt on such boards.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Stefan Roese
de34a61642 mips: Add CONFIG_MIPS_MACH_EARLY_INIT for very early mach init code
This patch adds the optional call to mips_mach_early_init() to start.S
at a very early stage. Its disabled per default. It can be used for
very early machine / platform specific init code.  Its called very
early and at this stage the PC is allowed to differ from the linking
address (CONFIG_TEXT_BASE) as no absolute jump has been performed until
this call.

It will be used by thje Octeon platform.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
81d4b14f7e mips: sync asm/mipsregs.h with Linux 5.7
Sync asm/mipsregs.h with Linux 5.7. Also replace the custom
symbols EBASE_CPUNUM and EBASE_WG with the according symbols
from Linux.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
c0f99579fa mips: sync asm/addrspace.h with Linux 5.7
Sync asm/addrspace.h with Linux 5.7

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
eac800043f mips: sync asm/asm.h with Linux 5.7
Sync asm/asm.h with Linux 5.7.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
dd1bb42305 mips: remove deprecated UNCACHED_SDRAM() macro
This macro only served as a wrapper for CKSEG1ADDR() with an
exception for CONFIG_TB0229. CONFIG_TB0229 doesn't exist, thus
use CKSEG1ADDR() directly.

This also prepares for an upcoming asm header sync with Linux.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
57bfb1aed6 mips: add config options for generic cache setup code
Add an own Kconfig symbol for the initial disabling of caches
invoked from generic start code.

Also add an own Kconfig symbols for the initialization of caches
invoked from generic start code.

Until now both code paths could only be disabled with
CONFIG_SKIP_LOWLEVEL_INIT. But this is not flexible enough for
RAM boot scenarios like EJTAG or SPL payload or for machines
which don't require cache initialization or which want to
provide their own cache implementation.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
60772433dd mips: refactor disabling of caches
Logically this code belongs to cache_init.S.

If a complex SoC needs to replace the generic cache init,
mips_cache_disable() can now be called from custom start.S files.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
b55e07e565 mips: add KSEG1 wrapper for change_k0_cca
change_k0_cca() is called multiple times. Move the code for
changing to KSEG1 to a macro to avoid code duplication.

Also fix missing change to KSEG1 when changing to CONF_CM_CACHABLE_COW.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Daniel Schwierzeck
54e7fbd5ad mips: start.S: remove dead code
Since commit 703ec9ddf9 ("MIPS: Stop building position independent code")
the relocation code was completely reworked and removed from start.S.
Remove some left-overs of the old code.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Stefan Roese
60a0559b7f mips: cache: Make invalidate_dcache_range() weak to enable overwrite
This patch adds __weak to invalidate_dcache_range() in lib/cache.c. This
makes it possible to overwrite this function by a platforms specific
version, which will be done for Octeon.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Stefan Roese
1d4ba15c6f mips: cache: Make flush_cache() weak to enable overwrite
This patch adds __weak to flush_cache() in lib/cache.c. This makes it
possible to overwrite this function by a platforms specific version,
like done with the Octeon base port.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Stefan Roese
2eed3dca22 mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM
This patch enables the usage of CONFIG_MIPS_L2_CACHE without
CONFIG_MIPS_CM, which is what is needed for the newly added Octeon
platform.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Stefan Roese
c372813105 mips: reloc: Change R_MIPS_NONE to catch pre-reloc BSS usage
This patch changes the R_MIPS_NONE define from 0 to a magic value. This
makes it possible to better detect any forbidden pre-relocation usage
of BSS variables, as they are often zero'ed and then relocation is
stopped too early.

Additionally the error message is improved to also print the faulting
address. This helps finding the root-cause for this breakage by
comparing this address with the values in System.map.

This patch helps a lot when working on pre-relocation code, like the
Octeon DDR init code, where such variables have hit me multiple times
now.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
2020-07-18 14:23:25 +02:00
Stefan Roese
a02bc1f992 mips: traps: Set WG bit in EBase register on Octeon
WG (bit 11) needs to be set on Octeon to enable writing bits 63:30 of
the exception base register.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:25 +02:00
Stefan Roese
a414281da4 mips: time: Only compile the weak get_tbclk() when needed
This patch opts-out the compilation of get_tbclk() if
CONFIG_SYS_MIPS_TIMER_FREQ is not defined. This is used on the Octeon
platform, where the weak get_tbclk() function is overwritten by its
platform specific one.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 14:23:24 +02:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
eb41d8a1be common: Drop linux/bug.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
25a5818ff8 common: Drop asm/ptrace.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
52f2423804 common: Drop bootstage.h from common header
Move this fairly uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Mauro Condarelli
3fd0231432 mips: Add support for SoM "VoCore2".
Small patch to add support for VoCore/VoCore2 board.

VoCore is open hardware and runs OpenWrt/LEDE.
It has WIFI, USB, UART, 20+ GPIOs but is only one inch square.
It will help you to make a smart house, study embedded system
or even make the tiniest router in the world.

Details about this SoM can be found at "https://vocore.io/v2.html".

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-27 20:30:14 +02:00
Stefan Roese
04d21a93fa mips: mt76x8: ddr_cal: Correct dqs_find_min/max implementations
The current implementations have some issues detecting the correct
values:

dqs_find_max() will return "last passing fieldval + 1" instead of
"last passing fieldval". Also it will return "maxval + 1" in the
case that all fieldvals are tested valid (without error).

dqs_find_min() will not test the "lowest" value because of using ">"
instead of ">=".

This patch now rewrites these functions to fix those issues. Also,
this patch uses the same approach of a for loop in both functions making
it easier to read and maintain.

Since the variables are integers now, we can use min()/max(), which
handles the wrap around case for fieldval=0: return (0 - 1).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:13 +02:00
Stefan Roese
112add362b mips: mt76x8: ddr_cal: Change types from u32 to int in dqs_find_min/max
This change is made to enable comparison of integer variables, which
might be negative in the next patch. No functional change is intended
in this patch.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:13 +02:00
Stefan Roese
896449fa29 mips: mt76x8: ddr_cal: Rename dqs_test_valid() to dqs_test_error()
This function returns "-1" (true) upon error. So the function name does
not match its implementation which is confusing. This patch renames the
function to dqs_test_error() which makes the code easier to read.

Also change the return type to bool and return "true" or "false".

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:13 +02:00
Weijie Gao
6bd888b63b mips: mtmips: add support for mt7628-rfb
This patch adds support for mt7628 reference board. SPL_DM and DT are not
enabled for SPL to save about 17KiB for u-boot-spl.bin.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:13 +02:00
Weijie Gao
757cbbe956 mips: mtmips: enable SPL for all boards
This patch enables SPL for all mtmips boards. And also remove defconfig
files which are intend to build ram bootable u-boot files.

SPL_DM and OF_CONTROL are enabled for both boards.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:13 +02:00
Weijie Gao
7a4b6964b5 mips: mtmips: add SPL support
This patch adds SPL support for mtmips platform. The lowlevel architecture
is split into SPL and the rest parts are built into a memory loadable
u-boot image. Optional SPL_DM and OF_CONTROL are also supported.

The increment of size is very small (< 10 KiB) if SPL_DM and OF_CONTROL are
not enabled and the memory bootable u-boot (u-boot.img) is generated
automatically so there is not need to add a separate config for it.

A lzma compressed payload (u-boot-lzma.img) is also generated and it will
be combined with u-boot-spl.bin to form the unified ROM bootable binary
u-boot-mtmips.bin.

A spl loader is added to support uncompress the payload.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:12 +02:00
Weijie Gao
02cd449f0b mips: mtmips: rewrite lowlevel codes of mt7628
This patch rewrites the mtmips architecture with the following changes:

1. Move MT7628 soc parts into a subfolder.
2. Lock parts of D-Cache as temporary stack.
3. Reimplement DDR initialization in C language.
4. Reimplement DDR calibration in a clear logic.
5. Add full support for auto size detection for DDR1 and DDR2.
6. Use accurate CPU clock depending on the input xtal frequency for timer
   and delay functions.

Note:

print_cpuinfo() has incompatible parts with MT7620 so it's moved into
mt7628 subfolder.

Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
c95c3ec025 mips: add a option to support not reserving malloc space on initial stack
The initial stack on some platforms is too small to hold a large malloc
space. This patch adds a option to allow these platforms not reserving the
malloc space on initial stack. These platforms should set the malloc base
after DRAM is usable.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
2434f58c78 mips: add an option to support initialize SRAM for initial stack
Currently CONFIG_MIPS_INIT_STACK_IN_SRAM assumes the memory space for the
initial stack can be used directly. However on some platform the SRAM needs
initialization, e.g. lock cache.

This patch adds an option to allow a new function mips_sram_init() being
called before setup_stack_gd.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
df3bad96f3 dts: mtmips: add alternative pinmux node for uart2
This patch adds a new pinmux for UART2, which shares the pins with SPIS.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
a60c1e6d6b mips: add a mtmips-specific field to architecture-specific global data
SoCs of mtmips can use different CPU frequencies depending on the HW/SW
configurations. For example mt7628 uses 580MHz clock if the input xtal
frequency is 40MHz, and 575MHz clock if the xtal is 25MHz. Upon cold boot
the CPU uses the xtal frequency directly.

So hardcoding the timer frequency (half of the CPU frequency) in
CONFIG_SYS_MIPS_TIMER_FREQ is not a good idea for this case.

This patch adds a mtmips-specific field timer_freq to arch_global_data.
This field will be used later in mtmips-specific get_tbclk() to provide
accurate timer frequency in different boot stage.

Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
c366a45649 mips: mtmips: make use of sysreset-resetctrl for mt7628 soc
This patch replaces sysreset-syscon with sysreset-resetctrl for mt7628 soc.

Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00