Set MMC clock when reverting to safe bus mode and speed
in case current MMC mode fails. Otherwise, trying out
the other modes may fail as well.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[hp: fallback to legacy_speed]
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
When tuning command (CMD21) fails with command error, call
mmc_send_stop_transmission() to send stop command (CMD12).
Reviewed-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Add dev_dbg() message in case tuning abort fails
Move tuning opcode check from mmc_abort_tuning()]
Reviewed-by: Peng Fan <peng.fan@nxp.com>
If a tuning command times out, the card could still be processing it,
which will cause problems for recovery. The eMMC specification section
6.6 Data transfer mode (cont’d) claims that CMD12 can be used to stop
CMD21:
"
The relationship between the various data transfer modes is summarized (see Figure 27):
- All data read commands can be aborted any time by the stop command (CMD12).
The data transfer will terminate and the Device will return to the Transfer State.
The read commands are: ... send tuning block (CMD21) ....
"
Add a function that does that.
Based on Linux commit [1] and [2].
[1] e711f0309109 ("mmc: mmc: Introduce mmc_abort_tuning()")
[2] 21adc2e45f4e ("mmc: Improve function name when aborting a tuning
cmd")
Reviewed-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update commit message, quote relevant part of the specification.
Rename to mmc_send_stop_transmission().
Remove tuning opcode check, this is controller driver specific.
Deduplicate part of mmc_read_blocks() using this function.]
Reviewed-by: Peng Fan <peng.fan@nxp.com>
For MMC/eMMC, the MMC_CMD_STOP_TRANSMISSION response is R1 for read
transfers and R1b for write transfers per JEDEC Standard No. 84-B51
Page 126 . The response is R1b unconditionally per Physical Layer
Simplified Specification Version 9.00.
Correct the response type and add a comment about it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
When CONFIG_CMD_MMC and CONFIG_MMC are disabled, still some compilation
errors are seen as below due to unresolved symbols.
drivers/dfu/dfu_mmc.o: in function `mmc_block_op':
drivers/dfu/dfu_mmc.c:32: undefined reference to `find_mmc_device'
drivers/dfu/dfu_mmc.c:54: undefined reference to `mmc_get_blk_desc'
drivers/dfu/dfu_mmc.c:67: undefined reference to `mmc_get_blk_desc'
drivers/dfu/dfu_mmc.c:70: undefined reference to `mmc_get_blk_desc'
drivers/dfu/dfu_mmc.o: in function `dfu_fill_entity_mmc':
drivers/dfu/dfu_mmc.c:369: undefined reference to `find_mmc_device'
drivers/dfu/dfu_mmc.c:376: undefined reference to `mmc_init'
drivers/dfu/dfu_mmc.c:403: undefined reference to `mmc_get_blk_desc'
gnu/aarch64/lin/aarch64-linux/bin/aarch64-linux-gnu-ld.bfd: line 4:
31661 Segmentation fault (core dumped) $CC --sysroot=$LIBC
--no-warn-rwx-segment "$@"
Makefile:1760: recipe for target 'u-boot' failed
make: *** [u-boot] Error 139
make: *** Deleting file 'u-boot'
Add dependency of CONFIG_MMC for CONFIG_DFU_MMC config to fix the errors.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Bochs is convenient with QEMU on x86 since it does not require a video
BIOS. Add a driver for it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Move from using debug() to log_debug() so that we don't have to use the
__func__ parameter and can access other logging features.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The ACPI tables are special in that they are passed to EFI as a separate
piece, independent of other tables.
Also they can be spread over two areas of memory, e.g. with QEMU we end
up with tables kept in high memory as well.
Add new global_data fields to hold this information and update the bdinfo
command to show the table areas.
Move the rom_table_end variable into the loop that uses it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
In some cases the video ROM may have been enabled previously, such as by
a previous firmware stage. Use the correct address in that case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
A hex value is expected for the VGA mode. Add a 0x prefix, since the #
construct is not supported in SPL. We don't want to add it, due to
code-size constraints.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
When video is set up in SPL, U-Boot proper needs to use the correct
parameters so it can write to the display.
Put these in a bloblist so they are available to U-Boot proper.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
With qemu-x86_64 we need to run the video BIOS while in 32-bit mode, i.e.
SPL. Add a Kconfig option for this, adjust the Makefile rules and use
CONFIG_IS_ENABLED() where needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
When running the ROM the code is not very helpful when something goes
wrong. Add a little more debugging and some logging of return values to
improve this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Allow PCI autoconfig to be handled in SPL, so that we can set it up
correctly for boards which need to do this before U-Boot proper. This
includes qemu-x64_64 which needs to set up the video device while in
32-bit mode.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
When scanning fails it is useful to be able to decode what went wrong. Add
some debugging for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Once the ACPI tables have been set up, record their address so that it is
possible to list them with 'acpi list'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This is always zero in the source tree, so drop it.
While we are here, add a comment to _X86EMU_env since the symbol is
actually defined twice, which can cause confusion when building.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The Kconfig for this is currently inside a particular board. Move it into
the correct place and allow use in SPL, so that video can be used there
if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
It seems better to call this a 'bootdev' since this is name used in the
documentation. The older 'Bootdevice' name is no-longer used and may cause
confusion with the 'bootdevice' environment variable.
Update throughout to use bootdev.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Instead of using the hard-coded value of 0x1f, use 'TASK_TAG'
macro instead to construct the ucd_req_ptr->header.dword_0
This is in sync with what the Linux UFS driver does, i.e.
set the byte0 equal to TASK_TAG (see [1]).
Setting it to a fixed value of 0x1f is wrong as we define
TASK_TAG as 0 inside u-boot ufs framework. So, instead we
should use the macro value directly.
[1]. https://github.com/torvalds/linux/blob/master/drivers/ufs/core/ufshcd.c#L2705
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
This driver considers that a node with an empty label is the top.
But the led class has changed, if a label is not provided for a led,
the label is filed with the node name. So we update this driver
to use a wrapper to manage the top led node.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
The different CPSW sub-system Ethernet ports have different PHY mode
control registers. In order to allow the modes to get configured
independently only the register for the port in question must be
accessed, otherwise we would just be re-configuring the mode for port 1,
while leaving all others at their power-on defaults. Fix this issue by
adding a port-number based offset to the mode control base register
address based on the fact that the control registers for the different
ports are spaced exactly 0x4 bytes apart.
Fixes: 9d0dca1199 ("net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver")
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
scmi_to_linux_errno() is set to return an appropriate errno
which corresponds to a given SCMI status code.
But the current implementation always returns the same value.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Without CONFIG_CLK, the build fails with the following message:
LD u-boot
aarch64-none-linux-gnu-ld.bfd: drivers/firmware/scmi/scmi_agent-uclass.o: \
in function `scmi_bind_protocols':
.../drivers/firmware/scmi/scmi_agent-uclass.c:79: undefined reference to \
`_u_boot_list_2_driver_2_scmi_clock'
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
This was brought in in 2016 and a number of changes have been made since
then. There does not seem to be much change in functionality, but it is
a good idea to update from time to time.
Bring in the latest version:
5736b15 ("re-add perlin noise again")
Add a few necessary functions, with dummies in some cases. Update the tests
as there are subtle changes in rendering, perhaps not for the better.
Signed-off-by: Simon Glass <sjg@chromium.org>
For laying out text accurately it is necessary to know the width and
height of the text. Add a measure() method to the console API, so this
can be supported.
Add an implementation for truetype and a base implementation for the
normal console.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is sometimes necessary to highlight some text in a different colour.
Add an easy way to do this and then restore the original console colours.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present livetree can only be used for the control FDT. It is useful
to be able to use the ofnode API for other FDTs, e.g. those used by
the upcoming configuration editor.
We already have most of the support present, and tests can be marked with
the UT_TESTF_OTHER_FDT flag to use another FDT as a special case. But
with this change, the functionality becomes more generally available.
Plumb in the require support.
Signed-off-by: Simon Glass <sjg@chromium.org>
The putc_xy() method is supposed to return the amount of space used. The
existing implementation erroneously adds the previous sub-pixel position
to the returned value. This spaces out the characters very slightly more
than it should. It is seldom noticeable but it does make accurate
measurement of the text impossible.
Fix this minor but long-standing bug.
Fixes: a29b012037 ("video: Add a console driver that uses TrueType fonts")
Signed-off-by: Simon Glass <sjg@chromium.org>
This is useful when the background colour must be written before text
is updated, to avoid strange display artifacts.
Add a function for this, using the existing code from the truetype
console.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present there are various restrictions on the use of livetree:
- It is only available once the tree is unflattened, i.e. after relocation
- It is designed to be used with the control FDT
- It can (in principle) be used with other FDTs, but only if they are
unflattened first; this is not supported
Add a few checks to make sure that any tree that is created is actually
valid. Otherwise it can be confusing when nodes and properties cannot
actually be accessed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Devices do not necessarily have nodes attached to them, since they can be
created from platdata. In SPL a devicetree may in fact not exist at all.
Check the node before using it. This avoids failure when OF_CHECKS is
enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 5fc7cf8c8e ("gpio: add gpio-hog support")
Reviewed-by: Heiko Schocher <hs@denx.de>
Use proper register base and access method to access GRF registers.
GRF registers start at a completely different base, and need special
access method, that sets the change mask in the 16 MSBs.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
If phy is not defined in DT (eg. on rk3399), generic_phy_get_by_name
will return -ENODATA. Handle that case correctly.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
pllref_clk is unused after being retrieved. fin needs to be set
to dsi->ref clock's rate for the following calculation to work.
Otherwise fin is undefined, and calculation return bogus number
based on undefined variable.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
&priv->phy is always true. Compiler warns about this loudly.
Use a propper check for phy device allocation. Without this fix
using this driver with SoC that doesn't use external phy (eg. RK3399)
doesn't work.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
