Commit graph

757 commits

Author SHA1 Message Date
Faiz Abbas
55f8b70fee board: ti: am335x: Remove non DM_ETH code
With DM_ETH enabled in am335x devices, remove all the unused
non-DM code.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:55 -04:00
Faiz Abbas
0229c9330d board: ti: am335x: Add platdata for cpsw in SPL
The SPL image overflows when cpsw dt nodes are added and SPL_OF_CONTROL
is enabled. Use static platdata instead to save space.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:54 -04:00
Lokesh Vutla
5582c03565 board: ti: am65x: Enable fixing up msmc sram node
Create a ft_board_setup() api that gets called as part of
DT fixup before jumping to kernel. In this ft_board_setup()
call fdt_fixup_msmc_ram that update msmc sram node.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12 08:05:51 -04:00
Franklin S Cooper Jr
b3b2a9ea3e arm: dra7: Allow NAND to be enabled on DRA71x EVM.
If SW 8 pins 0 and 1 indicate that NAND should be enabled then
the pins pinmux must be reconfigured for NAND mode.

Therefore, enable NAND by reconfiguring the pinmux.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:49 -04:00
Franklin S Cooper Jr
f072aff944 board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
By default VOUT3 occupies the pins required for NAND. Therefore, create
a seperate entry that can be use to reconfigure these pins to work for
NAND.

On the EVM SWITCH 8 pins 0 and 1 will be used to determine if NAND is
enabled or not. For NAND to be selected pin 0 should be on and pin 1
should be off. Any other combination will assume NAND shouldn't be
enabled.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:49 -04:00
Murali Karicheri
f748ec9d32 ARM: k2g: add a workaround to reset the phy
This patch adds a workaround to reset the phy one time during boot
using GPIO0 pin 10 to make sure, the Phy latches the configuration
from the input pins correctly.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12 08:05:46 -04:00
Murali Karicheri
b15311c90b ARM: k2g-gp-evm: update to rgmii pinmux configuration
This patch updates pinmux configuration for K2G GP EVM based on
data generated by the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12 08:05:46 -04:00
Murali Karicheri
c7206e9789 ARM: k2g-ice: Add pinmux support for rgmii interface
This add pinmux configuration for rgmii interface so that network
driver can be supported on K2G ICE boards. The pinmux configurations
for this are generated using the pinmux tool at
https://dev.ti.com/pinmux/app.html#/default

As this required some BUFFER_CLASS definitions, same is re-used
from the linux defnitions in include/dt-bindings/pinctrl/keystone.h

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-12 08:05:45 -04:00
Andrew F. Davis
50580a0e70 board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef
When these were moved from mach-omap2 to board files they got placed
inside TI_SECURE_DEVICE ifdef block, they are not secure only, move
them up and out.

Fixes: 413b90777f ("ti: fastboot: Move weak overrides to board files")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-03-22 12:15:22 -04:00
Derald D. Woods
36a75344d7 ARM: omap3: evm: Update DM SPL support
- Switch to using the omap3-u-boot.dtsi file for needed properties
- Enable SPL_OF_CONTROL

This commit is based on the following series:

https://patchwork.ozlabs.org/project/uboot/list/?series=92472
https://patchwork.ozlabs.org/project/uboot/list/?series=92462

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-19 16:58:24 -05:00
Tom Rini
e0cc7df9fd omap3_beagle: Update for DM SPL support
- Switch to using the omap3-u-boot.dtsi file for needed properties.
- Remove a few SPL features to free up more SRAM space.
- Switch CONFIG_SYS_TEXT_BASE to the normal default, we don't need to
  worry about X-Loader at this point anymore.
- A few related updates to SPL options as part of switching to DM SPL.

Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
2019-02-19 16:58:23 -05:00
Vignesh R
cec96b83a0 configs: Remove am43xx_evm_ethboot_defconfig
am43xx_evm_ethboot_defconfig is not being actively used and has not been
moved to DM or DT. Also, ethboot cannot be tested on AM43xx EVM as such
due EVM limitations. Therefore delete it.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18 09:26:14 -05:00
Vignesh R
311e658ef3 configs: Remove unused am335x_evm defconfigs
These defconfigs don't seem be actively used any more, and have not been
moved to adapt DM or DT. Therefore delete them.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18 09:26:14 -05:00
Jean-Jacques Hiblot
347631bcdd board: ti: am43xx: turn on USB clocks
Enable USB clocks in late init stage to support ports under DM_USB.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:09 +01:00
Jean-Jacques Hiblot
c9d5220693 board: ks2_evm: Enable the USB clocks if DM_USB is used
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:09 +01:00
Tom Rini
7ff485c68b Merge branch 'master' of git://git.denx.de/u-boot-i2c
- DM_I2C_COMPAT removal for all ti platforms from Jean-Jacques Hiblot
- Fix in i2c command help output from Chirstoph Muellner.
2018-12-10 07:16:33 -05:00
Tom Rini
48d299a799 Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 and UDC cleanup
2018-12-10 07:15:12 -05:00
Jean-Jacques Hiblot
7eb1f607f1 am57xx: remove non-DM I2C code
am57xx configs uses DM_I2C both in SPL and u-boot.
Remove code for non-DM I2C support.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 07:17:02 +01:00
Jean-Jacques Hiblot
1514244cc1 ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL
DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C
API when DM_I2C is used. The goal is to eventually remove DM_I2C_COMPAT
when all I2C "clients" have been migrated to use the DM API.
This a step in that direction for the TI based platforms.
Build tested with buildman:
buildman -dle am33xx ti omap3 omap4 omap5 davinci keystone

boot tested with:
am335x_evm, am335x_boneblack, am335x_boneblack_vboot (DM version),
am57xx_evm, dra7xx_evm, k2g_evm, am437x_evm

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 07:15:21 +01:00
Andreas Dannenberg
2463f6728e ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT
The EEPROM reading in the board detection code is done through legacy
I2C functions which on platforms using DM_I2C this functionality is
provided via the CONFIG_DM_I2C_COMPAT layer. To allow newer platforms
to use the board detection code without relying on CONFIG_DM_I2C_COMPAT
go ahead and add an I2C handling implementation that directly uses the
I2C DM functionality.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-10 06:20:17 +01:00
Jean-Jacques Hiblot
532ededd5c board: ti: am57xx: remove USB platform code
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Jean-Jacques Hiblot
6b3b0bf99f board: ti: dra7-evm: remove USB platform code
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Jean-Jacques Hiblot
aec0081093 configs: am57xx_evm: Enable DM_USB and DM_USB_DEV
Enable DM_USB and DM_USB_DEV for AM57xx based boards.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Jean-Jacques Hiblot
b491afa0f3 configs: enable DM_USB and DM_USB_DEV for all DRA7 platforms
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Vignesh R
c3cd5fc870 board; ti: am57xx: turn on USB clocks
Enable USB clocks in late init stage to support ports under DM_USB.

Signed-off-by: Vignesh R <vigneshr@ti.com>

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Jean-Jacques Hiblot
24e261b39c board: ti: dra7xx-evm: turn on USB clocks in late init stage
For USB ports that use the Driver Model, turn on the clocks during the
late init stage.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-07 16:31:46 +01:00
Keerthy
3b074fb22b board: ti: ks2_evm: Over ride spl_get_load_buffer function
Currently k2 spi boot is broken as the image header
is getting copied to an invalid memory location

CONFIG_SYS_TEXT_BASE - sizeof (struct image_size)
which maps to 0xc000000 - 0x40 = 0xbffffc0 being a reserved
location.

We cannot change the CONFIG_SYS_TEXT_BASE address as the single
stage boots like UART boot will need the address to be 0xc000000
hence override the spl_get_load_buffer to have image_header
address as CONFIG_SYS_TEXT_BASE aka 0xc000000

Signed-off-by: Keerthy <j-keerthy@ti.com>
2018-12-06 23:26:32 -05:00
Lokesh Vutla
6418000311 board: ti: am65x: Update README to add R5 build support
Update the README file to add r5 build support and system
firmware support.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16 16:52:00 -05:00
Lokesh Vutla
6e2a7780d1 configs: am65x_evm_r5: Add initial support
Add initial defconfig support for AM65x
that runs on R5.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2018-11-16 16:51:59 -05:00
Lokesh Vutla
9dba883a45 board: ti: am654: r5: Add initial support for am654
Add initial support for AM654 based EVM running on R5.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-11-16 16:51:59 -05:00
Grygorii Strashko
af0cf2178b drivers: net: keystone_net: drop non dm code
Networking support for all TI K2 boards converted to use DM model and
CONFIG_DM_ETH enabled in all corresponding defconfig files, hence drop
unused non DM K2 networking code.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2018-11-05 10:42:00 -06:00
Nicholas Faustini
442faf61ab board: ks2: move uinitrd fixup logic inside ft_board_setup_ex
The uinitrd fixup logic should be executed after the FDT /chosen
node has been properly populated by fdt_initrd()

Signed-off-by: Nicholas Faustini <nicholas.faustini@azcomtech.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-10-10 13:32:41 -04:00
Sekhar Nori
20c37fb1bf board: ti: am335x: add support to fixup phy address
On beaglebone black, it can so happen that PHY address
is not latched correctly on reset and board boots with
PHY responding to a different address than that
programmed in device-tree. For example, see this report:

https://groups.google.com/d/msg/beagleboard/9mctrG26Mc8/1FuI_i5KW10J

Workaround this by fixing up device-tree passed to kernel
by using the PHY address detected in hardware.

Beaglebone itself uses only one ethernet port and its DT
currently uses phy_id (obsoleted). But the function has
been written to handle multiple ports and phy_id as well
as phy-handle to make the function more generically useful.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-09-25 21:49:18 -04:00
Lokesh Vutla
f3f094617a configs: am65x_evm_a53: Add initial support
Add initial defconfig support for AM65x that runs on A53.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00
Lokesh Vutla
ea8ad1d9b6 arm64: dts: k3: Add Support for AM654 SoC
Add initial DT support for AM654 EVM that runs on A53.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00
Lokesh Vutla
0911d95263 board: ti: am654: a53: Add initial support for am654
Add initial support for AM654 based EVM running on A53. Enable
4GB of DDR available on the EVM so that kernel DTB file
can be updated accordingly.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[Andreas: Added 4GB ddr support]
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2018-09-11 08:32:55 -04:00
Koen Kooi
ad6054f1fe Add Beaglebone Enhanced support
The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black,
but with the following differences:

 * Gigabit capable PHY
 * Extra USB hub, optional i2c control
 * lps3331ap barometer connected over i2c
 * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c
 * 1GiB DDR3 RAM
 * RTL8723 Wifi/Bluetooth connected over USB

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-08-03 19:53:01 -04:00
Alexander Graf
7e21fbca26 efi_loader: Rename sections to allow for implicit data
Some times gcc may generate data that is then used within code that may
be part of an efi runtime section. That data could be jump tables,
constants or strings.

In order to make sure we catch these, we need to ensure that gcc emits
them into a section that we can relocate together with all the other
efi runtime bits. This only works if the -ffunction-sections and
-fdata-sections flags are passed and the efi runtime functions are
in a section that starts with ".text".

Up to now we had all efi runtime bits in sections that did not
interfere with the normal section naming scheme, but this forces
us to do so. Hence we need to move the efi_loader text/data/rodata
sections before the global *(.text*) catch-all section.

With this patch in place, we should hopefully have an easier time
to extend the efi runtime functionality in the future.

Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: Fix x86_64 breakage]
2018-07-25 14:57:44 +02:00
Tomi Valkeinen
eae8291913 dra76: fix HDMI HPD pinmux
The pin used for HDMI HPD should be set to GPIO mode on DRA76, similarly
to all the other DRA7 and AM5 SoCs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-13 07:49:14 -04:00
Tomi Valkeinen
32651e4fb8 dra7/am5: remove CEC pin pull-up
HDMI CEC pins are set to pull-up, but CEC requires no pull. Fix this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-13 07:49:13 -04:00
Alex Kiernan
413b90777f ti: fastboot: Move weak overrides to board files
Overriding fastboot_set_reboot_flag() in arch/arm/mach-omap2/boot-common.c
leaves it applying all boards that derive from this, not just the ones which
have support for Android bootloader flow. Move the weak function override to
the relevant board files.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30 11:59:21 +02:00
Alex Kiernan
312a10f16b fastboot: Move fastboot to drivers/fastboot
Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to
drivers/fastboot.

Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants
FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split
USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing
behaviour.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-30 11:59:21 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Keerthy
ebf48500df board: ti: am43: Fix DCDC3 voltage for epos-evm
A common voltage of 1.35V was being programmed for all am43 board
versions. EPOS-EVM Needs 1.20V for LPDDR2.

Fixes: fc69d47262 (“board: ti: AM43XX: Add ddr voltage rail configuration”)
Reported-by: James Doublesin <doublesin@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-06 13:35:40 -04:00
Alex Kiernan
d4bb3b3762 spl: ti: Avoid serial calls when serial support is disabled
If CONFIG_SPL_SERIAL_SUPPORT is not set, then the build will fail:

board/ti/am335x/built-in.o: In function `spl_start_uboot':
board/ti/am335x/board.c:247: undefined reference to `serial_tstc'
board/ti/am335x/board.c:247: undefined reference to `serial_getc'

Avoid the calls to the serial functions in that case.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-28 18:32:23 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Alex Kiernan
9925f1dbc3 net: Move enetaddr env access code to env config instead of net config
In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

This fixes failures such as:

  board/ti/am335x/built-in.o: In function `board_late_init':
  board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
  u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'

which caters for use cases such as:

commit f411b5cca4 ("board: am335x: Always set eth/eth1addr environment
variable")

when Ethernet is required in Linux, but not U-Boot.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08 23:00:58 -04:00
Alex Kiernan
8cf2f3602e ti: am335x: Fix build when networking is disabled
When compiling without CONFIG_CLOCK_SYNTHESIZER (which is implied by
CONFIG_DRIVER_TI_CPSW for am335x_evm), exclude the network setup for
AM335x-ICEv2 to avoid link time failures:

  board/ti/am335x/board.c:683: undefined reference to `setup_clock_synthesizer'

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08 23:00:58 -04:00
Vignesh R
5375a9b566 board: ti: am43xx: Define embedded_dtb_select for runtime DTB selection in U-boot
AM437x QSPI boot is a single stage boot and hence needs runtime DTB
selection to support AM437x-SK and AM437x-IDK with DM enabled. This is
required to move am43xx_evm_qspiboot_defconfig to use DM/DT.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-04-06 20:45:44 -04:00
Tero Kristo
7619badb9c ARM: AM43xx: Add support for RTC only + DDR in self-refresh mode
Kernel stores information to the RTC_SCRATCH0 and RTC_SCRATCH1 registers
for wakeup from RTC-only mode with DDR in self-refresh. Parse these
registers during SPL boot and jump to the kernel resume vector if the
device is waking up from RTC-only modewith DDR in Self-refresh.

The RTC scratch register layout used is:

SCRATCH0 : bits00-31 : kernel resume address
SCRATCH1 : bits00-15 : RTC magic value used to detect valid config
SCRATCH1 : bits16-31 : board type information populated by bootloader

During the normal boot path the SCRATCH1 : bits16-31 are updated with
the eeprom read board type data. In the rtc_only boot path the rtc
scratchpad register is read and the board type is determined and
correspondingly ddr dpll parameters are set. This is done so as to avoid
costly i2c read to eeprom.

RTC-only +DRR in self-refresh mode support is currently only enabled for
am43xx_evm_rtconly_config.
This is not to be used with epos evm builds.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
[j-keerthy@ti.com Rebased to latest u-boot master branch]
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-04-06 17:04:33 -04:00