Commit graph

88344 commits

Author SHA1 Message Date
Marek Vasut
075e0b9050 ARM: renesas: Enable DM_ETH_PHY on 64-bit R-Car boards
Enable DM_ETH_PHY to correctly release the PHY on these boards from reset.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-17 13:56:34 +02:00
Marek Vasut
2d22cb3413 ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs on Salvator-X boards
Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on R-Car Gen3 Salvator-X boards. This allows software
to identify the PHY model at any time, regardless of the state of
the PHY reset line.

This is a fix for missed addition of these properties on Salvator-X
boards.

Ported from Linux kernel commit 722d55f3a9bd810f3a1a31916cc74e2915a994ce .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-17 13:56:34 +02:00
Tom Rini
252592214f Pull request doc-2023-10-rc5
Documentation:
 
 * move more TI board documentation to HTML
 * update TPM usage instructions for qemu-arm
 * update the EFI app documentation
 
 Other:
 
 * tpm: Fix autostart for TPM1.2 devices
 * spl: fix undefined return value in spl_blk_load_image
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmT8FHEACgkQxIHbvCwF
 GsRWfA/+LzyIHuFRjmbVHxpLBiOtPYbPcASI6nSZirEHhayPx20tLeoDeqoys/sN
 0m1vi0M4NXQfnx9hMJvRmr8RXypL1dl1so6jcRTBvumfBKlqppQciQ631uF4JsXf
 6YoHvWQR4vzJrhnVb0PWE/kGOiA6J8w66Zzf5rMKglsOPKdtzLDSYLx7BmUV6ZEg
 P/oPjSoa45uXJR7aNi9a3gazH65CLWHtoF1yigMEYgAmSfqq833ARDZbR/NUkU0Z
 p9+WJWHPxGnoWtM0JsOWm+zmtjv6AYQWgnAN2NM31QHf5WpqcS8SnwVBF0aZ3Q6e
 RlcTCCpuuohgO6XHFB4yWzzJjEn4nXxR+7smDFGKTu48kalPJVBQWnRaSo0mO9Cc
 yzlTOBgR8arnitXNrJcYEBYczhNupV7j1rZivzOBXpZBTDbFUPe+C4EQPRA15GVm
 6iiUYW2jFX49m2dfbbyK+7FcBat/GTTA6M8jIS2OaC1K9YWCt9WzUXuPGNB/7Cz8
 qxDr9PWwKCuCaGTbW6/QZCnHxJZJYykgpPgZB4pcpVYQiGd8KDJogRKz0lnGeN2s
 5PAL0XHW7pReUOm4qJOmRGGH1tX3jWRBNfw4ktymWO/+i1b0rO/Gs3Y+meZVqRoK
 dMsLmrX+VCTjQzcyS3jF4b1e+Av6j1vUc07IWh1QgJDkZTiHKeM=
 =2Zfi
 -----END PGP SIGNATURE-----

Merge tag 'doc-2023-10-rc5' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request doc-2023-10-rc5

Documentation:

* move more TI board documentation to HTML
* update TPM usage instructions for qemu-arm
* update the EFI app documentation

Other:

* tpm: Fix autostart for TPM1.2 devices
* spl: fix undefined return value in spl_blk_load_image
2023-09-09 09:33:02 -04:00
Neha Malcom Francis
7314ba2bf8 doc: board: ti: Move documentation from README to .rst
Make the conversion for all existing TI documentation from README to
.rst

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
2023-09-09 06:12:47 +02:00
Joao Marcos Costa
129048a3b7 doc: Update path to source_file_format.rst
Previously, the file extension was .txt, and it referenced the uImage.FIT
directory, which no longer exists. This commit updates the path accordingly.

Signed-off-by: Joao Marcos Costa <jmcosta944@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-09-09 06:12:47 +02:00
Heinrich Schuchardt
c00b289b96 timer: document the unit of the timer rate
To avoid confusion document that timer_dev_priv.clock_rate and
timer_get_rate() yield the timer rate in hertz.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-09 06:12:47 +02:00
Simon Glass
063536a781 doc: efi: Update for the 64-bit app
The 64-bit app is supported now, so update the documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-09-09 06:12:47 +02:00
Ilias Apalodimas
5d1fa6b6a6 doc: qemu: switch swtpm instruction to 'tpm autostart'
We don't have a documentation page for our TPM subsystem.  I plan
on sending one in the future,  but in the meantime document the
new 'tpm autostart' command in the QEMU instructions while using
a SWTPM

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-09 06:12:47 +02:00
Ilias Apalodimas
edce82c822 tpm: Fix autostart for TPM1.2 devices
On commit e663b2ff4ba2("tpm: Add 'tpm autostart' shell command") an
autostart function was added for both TPM1.2 and 2.0 devices.  Instead
of correctly wiring the autostart command for TPM1.2 devices that patch
mistakenly added it on 'tpm init'

Fixes: commit e663b2ff4ba2("tpm: Add 'tpm autostart' shell command")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-09-09 06:12:47 +02:00
Heinrich Schuchardt
323e91a183 spl: undefined return value in spl_blk_load_image
spl_blk_load_image() should not return an uninitialized value if
blk_get_devnum_by_uclass_id() fails.

Fixes: 8ce6a2e175 ("spl: blk: Support loading images from fs")
Reported-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by:  Xavier Drudis Ferran <xdrudis@tinet.cat>
2023-09-09 06:12:47 +02:00
Tom Rini
c0c08be546 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-usb
- DWC3 fix on Layerscape
2023-09-05 14:44:10 -04:00
Tom Rini
34056394ce Fixes for release
-----------------
 
 - imx9: fix DRAM calculation
 - thermal: fixes
 - fixed for DM, DH and Gateworks boards
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17639
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZPbe+Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bErACfVU0xBJ7rsbqjUHh18Za1tFwmIGEAnRLB5csC
 XsEElHzqrsNBBCLN3ahx
 =GZAw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230905' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for release
-----------------

- imx9: fix DRAM calculation
- thermal: fixes
- fixed for DM, DH and Gateworks boards

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17639
2023-09-05 09:05:16 -04:00
Tom Rini
e7b7dca28f Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
+ Implement OpenSBI DBCN extension for early debug console
+ Fixes for VisionFive2 board
      + Fix timer missing
      + Fix L2 LIM issue
      + Enable PCIE auto enumeration to support USB and NVMe by default
+ Set eth0 mac address properly
+ Add __noreturn attribute to spl_invoke_opensbi
2023-09-05 09:04:49 -04:00
Heinrich Schuchardt
dfe0837494 risc-v: implement DBCN based debug console
Use the DBCN SBI extension to implement a debug console.
Make it the default for S-mode RISC-V.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:55 +08:00
Heinrich Schuchardt
d14222e7c1 risc-v: implement DBCN write byte
The DBCN extension provides a Console Write Byte call.
Implement function sbi_dbcn_write_byte to invoke it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:55 +08:00
Chanho Park
ef08687ea0 spl: add __noreturn attribute to spl_invoke_opensbi function
spl_invoke_opensbi function is not returned to SPL. Thus, we need to
set __noreturn function attribute.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:51 +08:00
Shengyu Qu
f39e24496a configs: starfive: Disable SYS_MALLOC_CLEAR_ON_INIT by default
SPL_SYS_MALLOC_CLEAR_ON_INIT would enable SYS_MALLOC_CLEAR_ON_INIT by
default, but that's not need on JH7110, so disable that.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:46 +08:00
Shengyu Qu
64339bc1f2 riscv: cpu: jh7110: Imply SPL_SYS_MALLOC_CLEAR_ON_INIT
Starfive JH7110 needs to clear L2 LIM to zero before use or ECC error
would be triggered. Currently, we use DDR ram for SPL malloc arena on
Visionfive 2 board in defconfig, but it's also possible to use L2 LIM as
SPL malloc arena. To avoid triggering ECC error in this scenario, we
imply SPL_SYS_MALLOC_CLEAR_ON_INIT as default.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:46 +08:00
Shengyu Qu
c9db9a2ef5 dlmalloc: Add support for SPL_SYS_MALLOC_CLEAR_ON_INIT
To support SPL_SYS_MALLOC_CLEAR_ON_INIT, we have to modify
#ifdef CONFIG_SYS_MALLOC_CLEAR_ON_INIT
to #if CONFIG_IS_ENABLED(SYS_MALLOC_CLEAR_ON_INIT)

Signed-off-by: Bo Gan <ganboing@gmail.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-09-05 10:53:46 +08:00
Shengyu Qu
dd1eb1af26 Kconfig: Add SPL_SYS_MALLOC_CLEAR_ON_INIT
Add SPL version of SYS_MALLOC_CLEAR_ON_INIT, this would help devices
that need to clear ram before use to work correctly.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-09-05 10:53:46 +08:00
Shengyu Qu
f943417737 doc: board: starfive: Add more info about supported driver
Since PLDA PCIE driver is added and VL805 support is enabled in
defconfig for Starfive Visionfive 2, modify the document to keep
consistent.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-09-05 10:53:41 +08:00
Shengyu Qu
dccf4a843a configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2
Although PCIE driver already exists, board defconfig isn't configured to
enable PCIE enum on boot, thus USB storage device and NVME drive are not
supported by default. So modify defconfig to enable PCIE auto enum, then
start USB subsystem and scan nvme drive on boot.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-09-05 10:53:41 +08:00
Torsten Duwe
6164d86984 riscv: jh7110: enable riscv,timer in the device tree
The JH7110 has the arhitectural CPU timer on all 5 rv64 cores.
Note that in the device tree.

Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:36 +08:00
Torsten Duwe
f39f8f77a5 riscv: allow riscv timer to be instantiated via device tree
For the architectural timer on riscv, there already is a defined
device tree binding[1]. Allow timer instances to be created from
device tree matches, but for now retain the old mechanism, which
registers the timer biggy-back with the CPU.

[1] linux/Documentation/devicetree/bindings/timer/riscv,timer.yaml

Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:36 +08:00
Seung-Woo Kim
71914337ef eeprom: starfive: set eth0 mac address properly
fdt_fixup_ethernet() sets eth0 mac address from ethaddr. Set
ethaddr to environment instead of eth0addr.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:29 +08:00
Tom Rini
493fd3363f nokia_rx51: Remove platform
This platform is behind on migrations (it is the sole user of the oldest
legacy version of the USB gadget stack and is long overdue for
migration) and with Pali no longer being a maintainer, we remove this
platform.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-04 21:14:32 -04:00
Tom Rini
af7de99e0c MAINTAINERS: Drop Pali Rohár
Remove Pali from his listed maintainer entries due to his publicly
visible actions on the mailing list.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-04 21:13:38 -04:00
Fabio Estevam
a79fca7b44 thermal: imx_tmu: Increase the polling interval
Polling every second to check whether the CPU has cooled down is
too frequent.

Allow more time for the CPU to cool down by increasing the polling
interval to 5 seconds by defaut.

This value is used in the absence of the 'polling-delay' devicetree
property.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-04 17:26:44 +02:00
Fabio Estevam
f4898e4b0e thermal: imx_tmu: Fix the temperature unit
The temperature unit is millidegree Celsius, so divide by 1000 to correctly
print the temperature values in Celsius.

While at it, also change a typo: "has beyond" to "is beyond".

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-04 17:26:44 +02:00
Fabio Estevam
966480fe43 thermal: imx_tmu: Increase the log level for high temperatures
dev_info() message is not printed by default. Increase the log level
to dev_crit(). This allows the critical messages related to the temperature
getting beyong the alert threshold to be displayed.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-09-04 17:26:44 +02:00
Fabio Estevam
402b8106ec thermal: imx_tmu: Fix the polling default
When the 'polling-delay' property is not passed via devicetree,
pdata->polling_delay keeps at 0. This causes the imx_tmu driver to get
stuck inside the busy while() loop when the CPU temperature is above
the alert point.

Fix this problem by passing a one second polling interval, which provides
a proper delay to let the system to cool down and exit the while() loop
when the temperature is below the alert point.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-04 17:26:44 +02:00
Fabio Estevam
282ff895c8 imx8mm_evk_defconfig: Select CONFIG_IMX_TMU
Select the i.MX8MM thermal driver as it is useful for displaying
the CPU temperature and its grading:

CPU:   Commercial temperature grade (0C to 95C) at 38C

It also prevents booting when the temperature is above the alert
point.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-04 17:26:44 +02:00
Tom Rini
b27eeca112 Prepare v2023.10-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-04 10:39:43 -04:00
Tom Rini
164b86f26b Merge tag 'rpi-2023.10' of https://source.denx.de/u-boot/custodians/u-boot-raspberrypi
Updates for RPi for 2023.10:

- rpi: Disable DISTRO_DEFAULTS
- arm: rpi: Switch to standard boot
- arm: rpi: Switch to a text environment
2023-09-04 10:07:48 -04:00
Oleksandr Suvorov
7f4b73fe69 usb: dwc3: Fix enabling USB_DR_MODE_HOST
The original logic always enables USB_DR_MODE_HOST operation mode in
dwc3_layerscape_bind() in u-boot. Prevent choosing USB_DR_MODE_HOST
operation mode if USB_HOST is not enabled.

Fixes: 2b0b51d0be ("usb: dwc3: add layerscape support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2023-09-04 15:51:38 +02:00
Oleksandr Suvorov
da93ea6a9a usb: dwc3: Fix renaming SPL_USB_HOST_SUPPORT to SPL_USB_HOST
In the usb/dwc3-layerscape driver the first option should be renamed
to the latter as well. Do it.

Fix original logic in dwc3_layerscape_bind() - do not enable

Fixes: 333e4a621d ("Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2023-09-04 15:51:38 +02:00
Marek Vasut
2629b18ed4 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Plus eDM SBC
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
7e4e4ff6ec ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Mini eDM SBC
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
bd7606d142 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on DH i.MX8M Plus DHCOM
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Tim Harvey
99eb21cfcc board: gateworks: venice: fix gw7904
Add missing imx8mm-venice-gw7904 to CONFIG_OF_LIST

Fixes commit 61e7f97325 ("board: gateworks: venice: add imx8mm-gw7904 support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-09-04 10:21:20 +02:00
Elena Popa
07908bf5e5 arm: imx: imx8m: imx9: Fix DRAM size calculation due to rom_pointer
If dram_init_banksize() is called from SPL, the rom_pointer, at that
point, is not correctly initialized. This causes wrong calculation of
DRAM start and size in dram_init_banksize(). The issue became apparent
only in Falcon Mode. Added an extra condition to prevent using
rom_pointer in SPL.

Signed-off-by: Elena Popa <elena.popa@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
f58b0c8534 ARM: imx: Select 2 DRAM banks on Data Modul i.MX8M Mini eDM SBC
U-Boot splits DRAM bank spanning addresses below and above the 32bit
boundary into two DRAM banks. Since this platform may come with 4GiB
of DRAM, increase the DRAM bank count to 2.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
e47cab0fa1 ARM: imx: Drop CONFIG_USE_BOOTCOMMAND=n on i.MX6 DHSOM
This board certainly does use default 'run distro_bootcmd' boot command,
make sure this is set in 'bootcmd' variable.

Fixes: 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-09-04 10:21:20 +02:00
Simon Glass
fc2af2d978 arm: rpi: Switch to a text environment
Use the new environment format so we can drop most of the config.h file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03 23:33:04 +01:00
Simon Glass
90f626a5d8 rpi: Disable DISTRO_DEFAULTS
Disable this option to reclaim some space, since bootstd requires less
functionality to operate (e.g. hush parser).

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03 23:20:59 +01:00
Simon Glass
c771e5b8c2 arm: rpi: Switch to standard boot
Drop use of the distro scripts and use standard boot instead.

We don't need to specify the mmc devices individually, since they are
used in order from 0 to 2, and standard boot uses that order anyway.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03 23:20:59 +01:00
Tom Rini
8999257f21 Pull request doc-2023-10-rc4-2
* Man-page for gpt command
 * Fix long text help of gpt command
 * Add events to HTML documentation
 * Update Toradex documentation
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmTy6HAACgkQxIHbvCwF
 GsQGnhAAjozx+0buHUe/7PGupsbFnLrY082ghXADj53YiVqXCg0qQ2zBk5ttFvkE
 qBDYohWIZVK5zLsAeubG2h5p4ju1uD+dSQDYjrwt3X/ML29Mv8TLyMMj91EamIcj
 ofnWNQAdVYNFYSpZ0Nhk4IKgjkq/FkAlroAhGCQoCfZjEwpVxFacBy6mEnFqUXhe
 J5XeMWm0yyNENii5PTV4Go337iP+w8yjPeAQj7IXTIw3Pi2rk2W+4iBuuDvbxJBl
 Z/qO+xDkDj6ryRU6jZb2T/q0xhY3xpXt/WUFeU76167qhLsMRglCb9Z+sQqLx8Lo
 NqfJbIM3Xnovl5KTXzc/QrmtiajrjtXsDWdHiDGyqU0aRabSBeK2s4cHU8uVguUB
 9luAK63SbXNuVvOOd3cypEtU9eWmbsB/N7XcPlEbTPWgK5jJQnZYkhi8OZirNqT7
 Tak9F9yd6TP5g2sdxRMxWdz1+oHsJdh4CHBBj4SuisYj9DMi+dtWlyb6VQ5Nkf7Y
 66W9h+W2IvyKqDeZwbmjgprc4cvRcoPe7s/hck0h01emxdHGL/Xtu6LThbz0DNI9
 VWMRMKmTluOcB6AWDjw8Xsq3wQqXcsICB+qUfbwFm8OQMVouFqDP9jT/cvVShqPJ
 fbnbYuSPxW1LpU8f3+uEhTjBRoJdfQa8EMnCtRRaHzfUWSWTQvc=
 =RoWP
 -----END PGP SIGNATURE-----

Merge tag 'doc-2023-10-rc4-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request doc-2023-10-rc4-2

* Man-page for gpt command
* Fix long text help of gpt command
* Add events to HTML documentation
* Update Toradex documentation
2023-09-02 09:08:54 -04:00
Joshua Watt
44c5d7764b doc: Add gpt command documentation
Adds initial documentation for the gpt command

Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
2023-09-02 09:44:04 +02:00
Joshua Watt
1fa11cdcfe cmd: gpt: Remove confusing help text
This help text appears to be a fragment of the text shown when
CONFIG_CMD_GPT_RENAME is enabled, but is confusing so remove it.

Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-09-02 09:43:49 +02:00
Marcel Ziswiler
b4b7eed499 doc: board: toradex: verdin-am62: document update u-boot wrapper
Now with the update U-Boot wrappers having been sorted out, document
their usage.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-09-02 06:05:45 +02:00