Wolfgang Denk
21a9cc028d
Fix typo.
2006-08-29 10:49:11 +02:00
Wolfgang Denk
16850919ff
Code cleanup
2006-08-27 18:10:01 +02:00
Jon Loeliger
3a25220822
Merge branch 'mpc86xx'
2006-08-25 17:30:24 -05:00
Haiying Wang
5567806b67
Change ramdiskaddr and dtbaddr
...
Remove PEX fluff commands.
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-25 17:28:20 -05:00
Wolfgang Denk
3b0ff842bf
Fix typo in MCC200/PRS200 configuration
2006-08-25 11:47:06 +02:00
Wolfgang Denk
113f64e09a
Update for MCC200 / PRS200 boards:
...
- auto-adjust console device for Linux.
- fix typos.
2006-08-25 01:38:04 +02:00
Wolfgang Denk
15f29f06ed
Merge with /home/tur/proj/fo300/u-boot
2006-08-25 00:13:37 +02:00
Wolfgang Denk
ed1cf8456f
Updates for MCC200 / PRS200 boards:
...
- support for configurations with SDRAM or DDR memory,
- support for highboot and lowboot
- adjusting environment definitions
2006-08-24 00:26:42 +02:00
Jon Loeliger
5e4c24bcb3
Merge branch 'mpc86xx'
2006-08-23 10:40:37 -05:00
Jin Zhengxiong
dabf9ef8c1
Add AHCI define and sata support for MPC8641HPCN board.
...
Signed-off-by:Jason Jin<jason.jin@freescale.com>
2006-08-23 10:40:10 -05:00
Jin Zhengxiong
4782ac80b0
Add AHCI support to u-boot
...
Add AHCI support in u-boot, enable the sata disk controllers which
following the AHCI protocol.
Signed-off-by:Jason Jin<jason.jin@freescale.com>
2006-08-23 10:39:01 -05:00
Zhang Wei
d8ea2acf5f
Add dtb boot-up parameter to default boot commands.
...
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2006-08-23 10:32:08 -05:00
Jon Loeliger
ad09083c37
Merge branch 'mpc86xx'
2006-08-22 18:26:28 -05:00
Jon Loeliger
b93775c203
Cleanup even more poorly introduced whitespace.
2006-08-22 18:26:08 -05:00
Jon Loeliger
e80e82cbb9
Merge branch 'mpc86xx'
2006-08-22 18:07:57 -05:00
Jon Loeliger
ae6241685c
Cleanup more poorly introduced whitespace.
2006-08-22 18:07:00 -05:00
Jon Loeliger
38546f08c6
Merge branch 'mpc86xx'
2006-08-22 17:55:45 -05:00
Jon Loeliger
2c33e8a1c5
Cleanup poorly introduced whitespace.
2006-08-22 17:54:05 -05:00
Jon Loeliger
4b7576fb80
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-08-22 10:17:59 -05:00
Matthew McClintock
87a449c8ac
Support for FDT in uImage format, error when using FDT from flash
...
Signed-off-by: Matthew McClintock <msm@freescale.com>
2006-08-22 09:23:55 -05:00
Bartlomiej Sieka
ddde6b7cf8
Add a fix for a buggy USB device on the FO300 board.
2006-08-22 10:38:18 +02:00
Wolfgang Denk
4a39616da4
Merge with http://opensource.freescale.com/pub/scm/u-boot-85xx.git#for_wd
2006-08-19 02:04:56 +02:00
Wolfgang Denk
5196a7a03b
Minor cleanup
2006-08-18 23:27:33 +02:00
Marian Balakowicz
6d3bc9b8cf
Add support for WTK FO300 board (TQM5200 based).
2006-08-18 19:14:46 +02:00
Wolfgang Denk
c5185470fe
Merge with /home/raj/git/u-boot
2006-08-18 15:23:10 +02:00
Wolfgang Denk
4bfb632077
Merge with git+ssh://fifi/home/wd/git/u-boot/master
2006-08-18 11:38:05 +02:00
Rafal Jaworowski
6fe16a8769
Fix TQM834x hang.
2006-08-18 10:39:11 +02:00
Wolfgang Denk
0a0f3a46fb
Cleanup debug code for yucca board.
2006-08-17 10:48:36 +02:00
Wolfgang Denk
463764c893
Add debug console on COM12 for MCC200 board
2006-08-17 00:36:51 +02:00
Matthew McClintock
25c751e9ad
* Support for FDT in uImage format, error when using FDT from flash
...
Signed-off-by: Matthew McClintock <msm@freescale.com>
2006-08-16 10:54:09 -05:00
Stefan Roese
899620c2d6
Add initial support for the ALPR board from Prodrive
...
NAND needs some additional testing
Patch by Heiko Schocher, 15 Aug 2006
2006-08-15 14:22:35 +02:00
Stefan Roese
f0ff4692ff
Add FPGA Altera Cyclone 2 support
...
Patch by Heiko Schocher, 15 Aug 2006
2006-08-15 14:15:51 +02:00
Jon Loeliger
e862ed1c22
Merge branch 'mpc86xx'
2006-08-14 16:41:02 -05:00
Jon Loeliger
fecf1c7e4d
Fix BAT0 to actually be cacheable, non-guarded as documented.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-14 16:40:33 -05:00
Wolfgang Denk
2f6fa46d41
Fixed common.h spelling error.
...
Patch by Cory Tusar, 30 Nov 2005
2006-08-14 23:17:47 +02:00
Wolfgang Denk
80f0c0f58f
Fix fatload command on FAT32 formatted partitions.
...
Patch by Joachim Jaeger, 18 Nov 2005
2006-08-14 22:05:26 +02:00
Wolfgang Denk
c72d9c5285
Merge with /home/sr/git/u-boot/denx
2006-08-13 02:25:32 +02:00
Wolfgang Denk
7213859d11
Merge with /home/raj/git/u-boot
2006-08-11 18:19:53 +02:00
Wolfgang Denk
d8519dc718
Fix preboot message on TQM85xx after switching to hush parser.
2006-08-11 17:33:42 +02:00
Wolfgang Denk
015c200b1f
Adapt TQM85xx ramdisk address to Linux kernel memory map
2006-08-11 17:29:38 +02:00
Rafal Jaworowski
36b904a7fd
Fix PCI-Express on PPC440SPe rev. A.
2006-08-11 12:35:52 +02:00
Wolfgang Denk
d10afb3916
Merge with /home/raj/git/u-boot
2006-08-10 15:40:49 +02:00
Rafal Jaworowski
692519b1ed
Add support for PCI-Express on PPC440SPe (Yucca board).
2006-08-10 12:43:17 +02:00
Jon Loeliger
92c427b189
Merge branch 'mpc85xx'
...
Conflicts:
include/ft_build.h
include/pci.h
Resolved, though.
2006-08-09 14:41:17 -05:00
Matthew McClintock
34c3c0e01d
* Switched default PCI speed for 8540 ADS back to 33MHz
...
* Added comments and a printf to warn that PCI-X won't
work at 33MHz
Patch by Andy Fleming 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:51:05 -05:00
Matthew McClintock
bf1dfffd8c
* Added VIA configuration table
...
* Added support for PCI2 on CDS
Patch by Andy Fleming 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:50:56 -05:00
Matthew McClintock
c88f9fe66b
* Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
...
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:50:48 -05:00
Matthew McClintock
97074ed965
* Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
...
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:50:44 -05:00
Matthew McClintock
f0e6f57f71
* Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
...
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:50:39 -05:00
Matthew McClintock
0e16387db1
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-09 13:50:30 -05:00
Matthew McClintock
5498d90312
* Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
2006-08-09 13:50:18 -05:00
Jon Loeliger
281f69ede2
Merge branch 'wd'
2006-08-09 13:36:54 -05:00
Wolfgang Denk
6587f7e1e9
Merge with /home/tur/proj/usb_sticks/u-boot
2006-08-07 20:28:05 +02:00
Stefan Roese
4f92ed5fc0
Add commandline history support to all AMCC eval boards
...
Patch by Stefan Roese, 07 Aug 2006
2006-08-07 14:33:32 +02:00
Bartlomiej Sieka
7455af41d1
Add rudimentary handling of alternate settings of USB interfaces - to fix
...
problems with some USB storage devices. Some code readability improvements.
2006-08-02 00:54:18 +02:00
Jon Loeliger
12d1ff4c18
Merge branch 'mpc86xx'
2006-07-28 10:00:33 -05:00
John Traill
515ab8a62e
Fix 8641HPCN timebase
2006-07-28 09:54:10 -05:00
Wolfgang Denk
fc6c4a67ae
Merge with /home/sr/git/u-boot/denx
2006-07-27 16:57:34 +02:00
Stefan Roese
193dd95834
AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
...
Please see doc/README.bamboo for details.
Patch by Stefan Roese, 27 Jul 2006
2006-07-27 16:14:05 +02:00
Wolfgang Denk
4c4aca8166
Fix preboot message on TQM5200 after switching to hush parser.
2006-07-26 10:33:37 +02:00
Wolfgang Denk
fd27996dac
Add support for 256 MB SDRAM on CPU87
...
Patch by Josef Wagner, 25 Nov 2005
2006-07-22 21:45:49 +02:00
Wolfgang Denk
135ae0062f
Add configuration for cam5200 board (based on TQM5200S).
2006-07-22 01:20:03 +02:00
Wolfgang Denk
966083e95f
More code cleanup
2006-07-21 15:24:56 +02:00
Wolfgang Denk
b9365a26a1
Code cleanup
2006-07-21 11:56:05 +02:00
Wolfgang Denk
2c33a38bac
Enable initrd ATAG for xm250 board.
...
Patch by Josef Wagner, 05 Sep 2005
2006-07-21 11:36:48 +02:00
Wolfgang Denk
32cb2c70c4
Add support for friendly-arm SBC-2410X board
...
Patch by JinHua Luo, 01 Sep 2005
2006-07-21 11:31:42 +02:00
Wolfgang Denk
53dd6ce4f0
Add support for KVME080 board
...
Patch by Sangmoon Kim, 18 Aug 2005
2006-07-21 11:29:20 +02:00
Wolfgang Denk
5078cce81c
* Cleanup TQM5200 board configurations:
...
- make highboot configurations use environment at high end, too,
to avoid flash fragmentation
- always use redundand environment
- don't enable video code for modules without graphics controller
- provide useful (though different) mtdparts settings
- get rid of CONFIG_CS_AUTOCONF which was always set anyway
* Extend mkconfig tool to print more useful target name
2006-07-21 11:16:34 +02:00
Wolfgang Denk
978b10964c
Add support for high-boot on TQM5200 and TQM5200S boards.
...
Hint: the CPLD on the TQM5200 must be programmed with a software
version supporting the high boot option! The new TQM5200S is
already supporting this option. On the TQM5200 this option will be
supported in configurations with MPC5200 rev B processors.
To actually "high boot", set jumper X30 on the STK52xx.
Patch by Martin Krause, 12 Jul 2006
2006-07-19 18:01:38 +02:00
Wolfgang Denk
45a212c4d7
Add support for new TQM5200 revisions
...
- Support for TQM5200S (short version without graphic controller)
- Support for modules with 'N' type S29GL128N Spansion flashes
(requires changes to flash layout)
- Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19 17:52:30 +02:00
Wolfgang Denk
bd3143f040
Fix support for PS/2 keyboard on TQM85xx boards
...
The PS/2 keyobard driver for the TQM85xx modules only supports the
internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
include a DUART, the TQM8560 modules can't be used with the PS/2
keyboard controller on the STK85xx board.
The PS/2 keyboard driver should work with the modules TQM8540,
TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
Make sure the PS/2 controller on the STK85xx is programmed. Jumper
settings: X66 1-2, 9-10; X61 2-3
Patch by Martin Krause, 21 Jun 2006
2006-07-19 14:49:35 +02:00
Wolfgang Denk
edd0b509ba
Adjust RTC century handling on STK52xx board to match Linux driver.
...
Patch by Martin Krause, 12 Jun 2006
2006-07-19 14:44:03 +02:00
Wolfgang Denk
8936601084
Enable buffered flash writes for TB5200 board.
2006-07-19 14:16:38 +02:00
Wolfgang Denk
5a3dfef732
Fix some bugs in TRAB board flash driver.
...
- increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
- use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
- remove "Unlock Bypass" mode, because macronix flashes do not support
this mode officially
- fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
for Intel compatible flashes, not for AMD compatible.
Patch by Martin Krause, 15 Feb 2006
2006-07-19 14:13:02 +02:00
Wolfgang Denk
b87dfd2854
Add support for TB5200 board
...
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
integrated in a little aluminium case.
Patch by Martin Krause, 8 Jun 2006
Some code cleanup
2006-07-19 13:50:38 +02:00
Wolfgang Denk
f3e06df7e8
Enable buffered flash writes for TQM5200 board.
2006-07-18 17:44:19 +02:00
Wolfgang Denk
cf8f60f0ea
Merge with /home/mk/11-cmb1920/u-boot
2006-07-13 22:12:58 +02:00
Jon Loeliger
0f2859689a
Merge branch 'mpc86xx'
2006-07-13 10:58:28 -05:00
Haiying Wang
bea3f28d28
Add support for reading and writing mac addresses to or from ID EEPROM.
...
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.
U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).
If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
Jin Zhengxiong
fcb28e7634
Fixed initrd issue by define big RAM
...
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
2006-07-13 10:35:10 -05:00
Wolfgang Denk
d22d102808
Cleanup duplicate definitions in MCC200 config file.
2006-07-13 16:29:40 +02:00
Markus Klotzbuecher
090eb73510
Add support for TQM885D board.
...
Patch by Martin Krause, 20 Mar 2006
Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12 15:26:01 +02:00
Markus Klotzbuecher
b02d0177c1
Support for spc1920 board.
...
Patch by Markus Klotzbuecher, 12 Jul 2006
2006-07-12 08:48:24 +02:00
Wolfgang Denk
87791f3bf2
MCC200 board: support console on any one of the Quad UART ports.
2006-07-11 00:23:54 +02:00
Wolfgang Denk
9d40799551
Major PCMCIA Cleanup to make code better readable and maintainable.
...
Notes:
- Board-dependend code for RPXLITE and RPXCLASSIC-based boards
placed to the drivers/rpx_pmcia.c file to avoid duplication.
Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- drivers/i82365.c has been split into two parts located at
board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
the only boards using CONFIG_82365).
- Changes were tested for clean build and *very* *few* boards.
2006-07-10 23:07:28 +02:00
Wolfgang Denk
a874c8c65f
MCC200: map the 2nd Quad UART into the processor's address space.
2006-07-06 22:31:16 +02:00
Marian Balakowicz
edd6cf20e1
Fix timer problems on AMCC yucca board.
...
Set Timer Clock Select to use CPU clock as a timer input source.
2006-07-06 21:17:24 +02:00
Wolfgang Denk
caaeaf925f
Bring yucca config more in line with other AMCC boards.
2006-07-05 10:42:14 +02:00
Wolfgang Denk
0095b787fe
Merge with /home/m8/git/u-boot
2006-07-05 10:03:52 +02:00
Marian Balakowicz
fbb0b559ae
Add system memory to the PCI region list for AMCC PPC44x CPUs.
...
Enabled it for Yucca board.
2006-07-04 00:55:47 +02:00
Marian Balakowicz
fe84b48a94
Cleanup config file and bootup output for Yucca board.
2006-07-03 23:42:36 +02:00
Wolfgang Denk
3b5f61a025
Merge with /home/m8/git/u-boot
2006-06-30 19:32:25 +02:00
Marian Balakowicz
bba6837732
Fix CONFIG_440_GX define usage.
2006-06-30 18:35:04 +02:00
Marian Balakowicz
971a5dd11a
Remove autogenerated bmp_logo.h file.
2006-06-30 18:23:06 +02:00
Marian Balakowicz
f6e5739a68
Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30 18:19:42 +02:00
Marian Balakowicz
6c5879f380
Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30 16:30:46 +02:00
Matthew McClintock
38433ccc58
* Switched default PCI speed for 8540 ADS back to 33MHz
...
* Added comments and a printf to warn that PCI-X won't
work at 33MHz
Patch by Andy Fleming 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-06-28 10:47:03 -05:00
Matthew McClintock
cbfc7ce756
* Added VIA configuration table
...
* Added support for PCI2 on CDS
Patch by Andy Fleming 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-06-28 10:46:13 -05:00
Matthew McClintock
52c7a68b8d
* Fixed PCI memory definitions
...
Patch by Andy Fleming 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-06-28 10:45:41 -05:00
Matthew McClintock
087454609e
* Added support for initializing second PCI bus on 85xx
...
Patch by Andy Fleming 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-06-28 10:45:17 -05:00
Matthew McClintock
b636aaeb6f
* Added PCI-X #defines for PCI-X initialization
...
Patch by Andy Fleming on 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-06-28 10:44:49 -05:00
Matthew McClintock
40d5fa35d0
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
...
Patch by Jon Loeliger 17-Jan-2006
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-06-28 10:43:36 -05:00
Matthew McClintock
1b380ec225
* Patch to modify ft_build.c to update flat device trees in place
...
Patch by Matthew McClintock 26-June-2006
2006-06-28 10:42:24 -05:00
Jon Loeliger
152a44c6cd
Merge branch 'mpc86xx'
2006-06-28 08:45:07 -05:00
Jin Zhengxiong
da012ab661
Change Id to symbolic name for RTL8139
...
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2006-06-28 08:43:56 -05:00
Jon Loeliger
894b773c86
Merge branch 'mpc86xx'
2006-06-27 11:08:17 -05:00
Jin Zhengxiong-R64188
bc09cf3c2b
Fix RTL8139 in big endian
...
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
signed-off-by: Wei Zhang <wei.zhang@freescale.com>
2006-06-27 10:29:32 -05:00
Jin Zhengxiong-R64188
fa7db9c377
Enable PCIE1 for MPC8641HPCN board
...
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2006-06-27 09:17:59 -05:00
Wolfgang Denk
a63c31cff5
Cleanup trab board for GCC-4.x
2006-06-26 10:54:52 +02:00
Wolfgang Denk
f73e73ba0e
Merge with /home/hs/U-Boot/u-boot-dev
2006-06-20 00:12:59 +02:00
Heiko Schocher
f5e0d03970
Add support for wrPPMC7xx/74xx boards
...
Patch from Richard Danter, 12 Aug 2005
2006-06-19 11:02:41 +02:00
Wolfgang Denk
a650cfa286
Merge with ssh://fifi/home/wd/git/u-boot/master
2006-06-19 01:37:03 +02:00
Wolfgang Denk
0c32d96ddd
Add support for gth2 board
...
Patch by Thomas Lange, Aug 11 2005
2006-06-16 17:32:31 +02:00
Wolfgang Denk
c12cffc543
Add support for CONFIG_SERIAL_MULTI on MPC5xxx
...
Patch by Martin Krause, 8 Jun 2006
This patch supports two serial consoles on boards with
a MPC5xxx CPU. The console can be switched at runtime
by setting stdin, stdout and stderr to the desired serial
interface (serial0 or serial1). The PSCs to be used as
console port are definded by CONFIG_PSC_CONSOLE
and CONFIG_PSC_CONSOLE2.
See README.serial_multi for details.
2006-06-16 17:04:45 +02:00
Wolfgang Denk
1ac7e17e86
Update configuration for CMC-PU2 board
...
Patch by Martin Krause, 17 Nov 2005
2006-06-16 16:43:33 +02:00
Wolfgang Denk
bc8bb6d458
Add support for PS/2 keyboard on TQM85xx board
...
Patch by Martin Krause, 07 Nov 2005
Tested on a STK85XX baseboard. Make sure the PS/2 controller
has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
2006-06-16 16:40:54 +02:00
Wolfgang Denk
cd65a3dc87
Adjust TQM5200 make targets
...
Make the automatic CS configuration the default.
The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
and CONFIG_TQM5200_AC are removed.
"TQM5200_config" is now the default for STK52XX.200 base boards.
On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
Patch by Martin Krause, 07 Nov 2005
2006-06-16 16:11:34 +02:00
Wolfgang Denk
e00f41eb81
Disable JFFS2 support for trab board
...
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:45:03 +02:00
Wolfgang Denk
3332240318
Change mtdparts definition on trab board to match current flash map
...
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:40:48 +02:00
Stefan Roese
ed4633c93a
Minor cleanup for PCS440EP board
...
Patch by Stefan Roese, 13 Jun 2006
2006-06-13 18:55:07 +02:00
Wolfgang Denk
b1d71358a9
Minor code cleanup.
2006-06-10 22:00:40 +02:00
Wolfgang Denk
4176c79964
Merge with /home/hs/U-Boot/u-boot-dev
2006-06-10 19:27:47 +02:00
Scott McNutt
9cc8337832
Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
...
Patch by Scott McNutt, 08 Jun 2006
2006-06-08 13:37:39 -04:00
Scott McNutt
1f6ce8f5ba
Nios II - Add EPCS Controller bootrom work-around
...
-When booting from an epcs controller, the epcs bootrom may leave the
slave select in an asserted state causing soft reset hang. This
patch ensures slave select is negated at reset.
Patch by Scott McNutt, 08 Jun 2006
2006-06-08 12:08:12 -04:00
Scott McNutt
3d22d0b89b
Update PK1C20 board
...
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
Patch by Scott McNutt, 08 Jun 2006
2006-06-08 12:03:21 -04:00
Scott McNutt
c2ced000f4
Nios II - Fix I/O Macros and mini-app stubs
...
-Fix asm/io.h macros
-Eliminate use of CACHE_BYPASS in cpu code
-Eliminate assembler warnings
-Fix mini-app stubs and force no small data
Patch by Scott McNutt, 08 Jun 2006
2006-06-08 11:59:57 -04:00
Jon Loeliger
a941b83241
Merge branch 'mpc86xx'
2006-06-07 08:49:46 -05:00
Jon Loeliger
72ed528a94
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-06-07 08:49:38 -05:00
Wolfgang Denk
e461a24113
Minor cleanup for PCS440EP board
2006-06-07 11:36:02 +02:00
Stefan Roese
4526c87eec
Update PCS440EP port to fit into one flash device (incl. environment)
...
Patch by Stefan Roese, 06 Jun 2006
2006-06-06 10:59:12 +02:00
Stefan Roese
a4c8d1389f
Add support for PCS440EP board
...
Patch by Stefan Roese, 02 Jun 2006
2006-06-02 16:20:36 +02:00
Wolfgang Denk
ba94a1bba3
* Update Intel IXP4xx support
...
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
2006-05-30 15:56:48 +02:00
Jon Loeliger
9a655876e5
Enable dual DDR controllers and interleaving.
2006-05-19 13:54:02 -05:00
Jon Loeliger
586d1d5abd
Update 86xx address map and LAWBARs.
2006-05-19 13:54:02 -05:00
Marian Balakowicz
27333f8c34
Enable autoboot for M5271EVB board.
2006-05-17 12:16:26 +02:00
Stefan Roese
56ced709af
Changed default ramdisk addr in yosemite/yellowstone ports
...
Patch by Stefan Roese, 15 May 2006
2006-05-15 15:11:20 +02:00
Wolfgang Denk
8cba090c58
Add support for VirtLab2 board
...
(needed because of differences in the PCMCIA hardware).
2006-05-12 16:15:46 +02:00
Wolfgang Denk
977b50f868
Minor cleanup.
2006-05-10 17:43:20 +02:00
Stefan Roese
278bc4b37f
Update yosemite configuration to enable flash write buffer support
...
Patch by Stefan Roese, 10 May 2006
2006-05-10 15:06:58 +02:00
Stefan Roese
512f8d5d78
Add support for AMCC 440EP Rev C and 440GR Rev B
...
Patch by John Otken, 08 May 2006
2006-05-10 14:10:41 +02:00
Stefan Roese
6080a0eb63
Update omap5912osk board support
...
- Fix OMAP support that omap5912osk compiles in current source tree
- Update with code from "http://omap.spectrumdigital.com/osk5912 "
to fix problems with DDR initialization
- Fix timer setup
- Use CFI flash driver and support complete 32MB of onboard flash
- Add "print_cpuinfo()" and "checkboard()" functions to display
CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006
2006-05-10 10:55:16 +02:00
Jon Loeliger
a67255363a
Merge branch 'mpc86xx'
2006-05-09 08:33:11 -05:00
Jon Loeliger
18b6c8cd8a
Get MPC8641HPCN flash images working.
...
Enable the CFI driver.
Remove bogus LAWBAR7 cruft.
Use correct TEXT_BASE, Fixup load script.
Enable SPD EEPROM during DDR setup.
Use generic RFC 1918 IP addresses by default.
2006-05-09 08:23:49 -05:00
Wolfgang Denk
1cfefe8cb6
Merge with /home/m8/git/u-boot
2006-05-09 13:46:55 +02:00
Wolfgang Denk
67a9468522
Merge with /home/wd/git/u-boot/master
2006-05-09 13:32:33 +02:00
Marian Balakowicz
78b123cd69
Add M5271EVB board support.
2006-05-09 11:54:44 +02:00
Marian Balakowicz
6f5155a95c
Make R5200 specific low level initialization board conditional.
2006-05-09 11:51:51 +02:00
Marian Balakowicz
b4853b779e
Update register definitions for MCF5271.
2006-05-09 11:43:59 +02:00
Wolfgang Denk
f149d8643e
Fix lowboot support on MCC200 board
2006-05-05 00:59:28 +02:00
Wolfgang Denk
0cf7d8aa0b
Merge with git://git.kernel.org/pub/scm/boot/u-boot/galak/u-boot.git#mpc8349emds
2006-05-03 17:52:20 +02:00