Import the device tree from mainline linux (v6.4-rc1) and add the
old PHY reset bindings in the PHY node, else U-Boot and linux won't
be able to use the PHY.
Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Link: https://lore.kernel.org/r/20230507124109.31778-2-vitali64pmemail@protonmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The AD401 board is the Amlogic A1 SoC reference board
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230505125639.3605-6-ivprusov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Based on Linux kernel commit:
dabad1ff85611 (pinctrl: meson: add pinctrl driver support for Meson-A1 SoC)
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230505125639.3605-5-ivprusov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add support for Amlogic A1 SoC family.
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Signed-off-by: Evgeny Bachinin <eabachinin@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230505125639.3605-4-ivprusov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add meson-a1-ad401.dts file from Linux 6.3-rc7
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230505125639.3605-3-ivprusov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Import Linux 6.3-rc7 Device tree and necessary bindings for Amlogic A1
board from 6a8f57ae2eb0 ("Linux 6.3-rc7").
Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230505125639.3605-2-ivprusov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
In current linker script both .efi_runtime_rel and .rela.dyn sections
are of RELA type whose entry size is either 12 (RV32) or 24 (RV64).
These two are arranged as a continuous region on purpose so that the
prelink-riscv executable can fix up the PIE addresses in one loop.
However there is an 'ALIGN(8)' between these 2 sections which might
cause a gap to be inserted between these 2 sections to satisfy the
alignment requirement on RV32. This would break the assumption of
the prelink process and generate an unbootable image.
Fixes: 9a6569a043 ("riscv: Update alignment for some sections in linker scripts")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Two conflicting bootcmds were included in the environment.
Streamline to defining the bootcmd only in the env file.
Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
The current mechanism is unnecessarily complex. Simplify the whole mechanism
such that the entire fitImage is signed, IVT is placed at the end, followed
by CSF, and this entire bundle is also authenticated. This makes the signing
scripting far simpler.
Signed-off-by: Marek Vasut <marex@denx.de>
In case the DEBUG is enabled, these three lines warn about cast of
pointer to integer of different size, add the missing casts to fix
the warnings.
Signed-off-by: Marek Vasut <marex@denx.de>
Fixed when build xilinx_zynqmp in long directory ( >256):
| /buildarea1/testtest/wr_build/wr1023test_secureboot/test1-what/test2-what/test3-what/test4-what/test5-what/test6-what/test7-what/test8-what/test9-what/test10-what/test11-what/test12-what/build/tmp-glibc/work/xilinx_zynqmp-wrs-linux/u-boot-xlnx/1_v2023.01-xilinx-v2023.1+gitAUTOINC+40a08d69e7-r0/build/fitImage-linux: Image file name (uboot-mkimage) too long, can't create tmpfile.
| Error: Bad parameters for FIT image type
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
With some changes to our mapping files in gitdm, re-generate the last
few releases worth of statistics to correctly reflect contributions. We
only go back this far to try and find a balance between highlighting
contributions and still being reviewable.
Signed-off-by: Tom Rini <trini@konsulko.com>
The intent here was to allow ANSI codes to be disabled, since it was
proving impoosible to test operation of the menu code when it kept moving
the cursor. Unfortunately this ended up in the patch.
Correct this by enabling ANSI again.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Pali Rohár <pali@kernel.org>
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Fixes: 32bab0eae5 ("menu: Make use of CLI character processing")
Tested-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
* move FIT documentation to HTML
* man-pages for the bind, bootm, and unbind commands
-----BEGIN PGP SIGNATURE-----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=WVuv
-----END PGP SIGNATURE-----
Merge tag 'doc-2023-07-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2023-07-rc6
* move FIT documentation to HTML
* man-pages for the bind, bootm, and unbind commands
Reformat and rewrite the documentation for this command.
This is a complicated command, so further improvements are welcome.
Signed-off-by: Simon Glass <sjg@chromium.org>
Bring this file into the documentation. For now it is not in the correct
format for a command, but it is valid rST. Futher work will improve this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having this as an addition to the end, move this into the
main body of the spec, rewriting as needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Avoid reference to uImage which is the old format. Drop the historical
language at the top and rewrite a few other sections. Correct the
U-Boot filename which is now in the boot/ directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
Bring these files into the documentation.
Fix 'wtih' and 'it' typos and repeated 'could' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move this document and convert it to rST. Make minimal changes, enough
for it to build successfully.
Future patches will tidy this up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Create a new usage/fit directory which will house information about FIT.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
To quote the author:
Ensure that every write is flushed to memory and afterward reads are
from memory.
Since the algorithm rely on the fact that accessing to not existent
memory lead to write at addr / 2 without this modification accesses to
aliased (not physically present) addresses are cached and wrong size is
returned.
This was discovered while working on a TI AM625 based board where cache
is normally enabled, see commit c02712a748 ("arm: mach-k3: Enable
dcache in SPL").
Ensure that every write is flushed to memory and afterward reads are
from memory.
Since the algorithm rely on the fact that accessing to not existent
memory lead to write at addr / 2 without this modification accesses
to aliased (not physically present) addresses are cached and
wrong size is returned.
This was discovered while working on a TI AM625 based board
where cache is normally enabled, see commit c02712a748 ("arm: mach-k3: Enable dcache in SPL").
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
This adds dcache_status() so that code using it can build
without error on sandbox. This is required in preparation
of adding cache handling into get_ram_size function.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fix the write to the HPRT register which treat W1C fields
as if they were mere RW. This leads to unintended clearing of such fields
This bug was found during the testing on Simics model. Referring to
specification DesignWare Cores USB 2.0 Hi-Speed On-The-Go (OTG)
Databook (3.30a)"5.3.4.8 Host Port Control and Status Register (HPRT)", the
HPRT.PrtPwr is cleared by this mistake. In the Linux driver (contrary to
U-Boot), HPRT is always read using dwc2_read_hprt0 helper function which
clears W1C bits. So after write back those bits are zeroes.
Signed-off-by: Teik Heng Chong <teik.heng.chong@intel.com>
Commands causing reset in some configs:
When bootflow scan is run, this will cause a UCLASS_BOOTDEV device to
be added as sibling of those UCLASS_BLK devices found in the search
chain defined in environment variable "boot_targets", until boot
succeeds from some device. This can happen automatically as part of
the default boot process on some boards (example: Rock Pi 4) depending
on the board configuration (DISTRO_DEFAULTS, BOOTSTD, BOOTCOMMAND,
etc.) because they have bootcmd=bootflow scan.
If boot doesn't succeed from any device, and usb is in boot_targets,
and an usb storage device is plugged to some usb port at boot time,
its UCLASS_MASS_STORAGE device will have a UCLASS_BOOTDEV device as
child, besides a UCLASS_BLK child.
If once the boot fails the user enters at the U-Boot shell prompt:
usb info
or
usb tree
The code in cmd/usb.c will eventually recurse into the UCLASS_BOOTDEV
device and pass a null usb_device pointer to usb_show_tree_graph() or
usb_show_info() (because it has no parent_priv_).
This causes a reset. The expected behaviour would be to ignore the
UCLASS_BOOTDEV device, continue listing the usb information and return
to the prompt.
Minimal test:
Another way to trigger this reset as a minimal test or on boards with
a different bootcmd would be:
- make sure "usb" is in environment variable boot_targets (might need
setenv boot_targets usb; and/or saveenv and reset), then, with a usb
storage device plugged to a usb port, run:
=> usb reset ; bootflow scan ; usb info
Solution:
Fix it (twice) by checking for null parent_priv_ and adding
UCLASS_BOOTDEV to the list of ignored class ids before the recursive
call.
This prevents the current particular problem with UCLASS_BOOTDEV, even
in case it ever gets some parent_priv_ struct which is not an
usb_device, despite being the child of a usb_device->dev. And it also
prevents possible future problems if other children are added to usb
devices that don't have parent_priv_ because they are not part of the
usb tree, just abstractions of functionality (like UCLASS_BLK and
UCLASS_BOOTDEV are now).
Signed-off-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
dm_test_restore() is called after dm unit test is run.
But this function does not scan any nodes under /firmware since
it calls dm_scan_fdt().
This causes an issue. For instance, scmi_sandbox_agent device
will disappear after running 'ut dm scmi_sandbox_agent'.
So call dm_extended_scan() instead. This change will be coherent
with what dm_scan() and test_pre_run() does.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>