Adds CONFIG_EFI_CAPSULE_MAX to configure the max index value used in
EFI capsule reports. Prior to this change is the hard coded value was
65535 which would exceed available storage for variables. Now the
default value is 15 which should work fine with most systems.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Measures the DTB passed to the EFI application upon new boolean config
switch CONFIG_EFI_TCG2_PROTOCOL_MEASURE_DTB. For platforms where the
content of the DTB passed to the OS can change across reboots, there is
not point measuring it hence the config switch to allow platform to not
embed this feature.
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
QueryVariableInfo with EFI_VARIABLE_HARDWARE_ERROR_RECORD is
accepted, remove wrong attribute check.
Fixes: 454a9442fb ("efi_loader: update attribute check for QueryVariableInfo()")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This patch adds a brief introduction to the RISC-V architecture and
the typical boot process used on a variety of RISC-V platforms.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Convert the documentation for the Broadcom BCM7445 and BCM7260 boards
to reStructuredText format and add the new filename to
doc/board/broadcom/index.rst.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fix typo and whitespace in the document.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The arg->session is not valid if arg->ret != NULL, so can't be
assigned, correct this.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
- binman: Add help message if opensbi is absent when building u-boot SPL
- AndesTech: rename cpu and board name to 'andesv5' and 'ae350'
- Clean up cache operation for Andes ae350 platform
Add the 'missing-msg' for more detailed output
on missing system firmware.
Signed-off-by: Rick Chen <rick@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Adjust the initial stack pointer address to 0x10000000(256M)
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
The current ae350-related defconfigs could also
support newer Andes CPU IP, so modify the names of CPU
from ax25 to andesv5, and board name from ax25-ae350 to ae350.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
This patch fixes following warning for the riscv32 toolchain.
drivers/cache/cache-v5l2.c:122:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
122 | regs = (struct l2cache *)dev_read_addr(dev);
| ^
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Display information about CPU and board during start up.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Loading an image via TFTP is often interrupted when retrying more than
10 times, increase the number of retries so that it does not simply stop
the transfer.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
To reduce the code size, CONFIG_V5L2_CACHE was disabled since commit:
ca06444aac
Turing on does not significantly increase the size of u-boot-spl.bin,
so we enable it by default to improve performance.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
This patch refines L1 cache enable/disable and v5l2-cache enable
functions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Update the compatible string of L2 cache.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
As the OpenSBI v1.2 does not enable the cache [0], we enable
the i/d-cache in harts_early_init() and do not disable in
cleanup_before_linux(). This patch also simplifies the logic
and moves the CSR encoding to include/asm/arch-andes/csr.h.
[0] bd7ef41398
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
The L2C configuration register has MAP field to indicate its version
is v0 (Gen1) or v1 (Gen2) L2-cache. This patch makes the driver
compatible with both memory-mapped scheme.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
The L2-cache is not enabled currently, the enbale_caches() will call
the v5l2_enable() callback to enable it in SPL.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
There is no need for RISCV_NDS_CACHE config to control cache switches.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
PLIC is used for external interrupt, while PLICSW is an Andes-specific
design for software interrupt.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmPrzWARHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIrebSMgf6AoUPviv/pdFFFJANjxGOerp4dEhCGzwx
5YpNBQ43BafhtFRfmGE/h6wiuDYsCG0npfrxlW17Ut7aSxoV/LeSokdHBeoUAYsj
3yL+r6xO/f17FAgOEasw0eNv1dKt95/vK6TdRRt7iEgrCFTRyYIwYHm+sOhXJ2aE
Jb+5JPXt+Do2xE8/s8d1KommC8N0GB1ZB+2S0wyEOB59RqEv682J60hpZjj6o+qp
hZ92ZLTvq3KMQoOmOmRmvMXn1uJDPYd/CTjHJsmWeFin8FpIIbmSQDz3wqNnVtMW
jTo1FZaGoSfZcfhPBsJ/MCBLdO4dXkYeYtqkO2mMT+CofpMlj2ePgQ==
=V1/A
-----END PGP SIGNATURE-----
Merge tag 'dm-next-valentine' of https://source.denx.de/u-boot/custodians/u-boot-dm into next
Move U-Boot over to the new schema for driver model tags
Test that:
- sandbox shows a warning when an unmigrated DT is used
- sandbox fails to run when migration is turned off
- sandbox_spl fails to build when migration is turned off
Signed-off-by: Simon Glass <sjg@chromium.org>
These should not be used anymore. Add a check to ensure they don't creek
back into U-Boot. Use bootph-... instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that Linux has accepted these tags, move U-Boot over to use them.
Tidy up the comments and formatting, making sure that VPL is mentioned
too.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a CONFIG option to deal with this automatically, printing a warning
when U-Boot starts up. This can be useful if the device tree comes from
another project.
We will maintain this through the 2023.07 release, providing 6 months
for people to notice.
Signed-off-by: Simon Glass <sjg@chromium.org>
Version 4:
Acked-by: Michal Simek <michal.simek@amd.com>
U-Boot has some particular challenges with device tree and devices:
- U-Boot has multiple build phases, such as a Secondary Program Loader
(SPL) phase which typically runs in a pre-SDRAM environment where code
and data space are limited. In particular, there may not be enough
space for the full device tree blob. U-Boot uses various automated
techniques to reduce the size from perhaps 40KB to 3KB. It is not
always possible to handle these tags entirely at build time, since
U-Boot proper must have the full device tree, even though we do not
want it to process all nodes until after relocation.
- Some U-Boot phases needs to run before the clocks are properly set up,
where the CPU may be running very slowly. Therefore it is important to
bind only those devices which are actually needed in that phase
- U-Boot uses lazy initialisation for its devices, with 'bind' and
'probe' being separate steps. Even if a device is bound, it is not
actually probed until it is used. This is necessary to keep the boot
time reasonable, e.g. to under a second
The phases of U-Boot in order are: TPL, VPL, SPL, U-Boot (first
pre-relocation, then post-relocation). ALl but the last two are optional.
For the above reasons, U-Boot only includes the full device tree in the
final 'U-Boot proper' build. Even then, before relocation U-Boot only
processes nodes which are marked as being needed.
For this to work, U-Boot's driver model[1] provides a way to mark device
tree nodes as applicable for a particular phase. This works by adding a
tag to the node, e.g.:
cru: clock-controller@ff760000 {
bootph-all;
compatible = "rockchip,rk3399-cru";
reg = <0x0 0xff760000 0x0 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
...
};
Here the "bootph-all" tag indicates that the node must be present in all
phases, since the clock driver is required.
There has been discussion over the years about whether this could be done
in a property instead, e.g.
options {
bootph-all = <&cru> <&gpio_a> ...;
...
};
Some problems with this:
- we need to be able to merge several such tags from different .dtsi files
since many boards have their own specific requirements
- it is hard to find and cross-reference the affected nodes
- it is more error-prone
- it requires significant tool rework in U-Boot, including fdtgrep and
the build system
- is harder (slower, more code) to process since it involves scanning
another node/property to find out what to do with a particular node
- we don't want to add phandle arguments to the above since we are
referring, e.g., to the clock device as a whole, not a paricular clock
- the of-platdata feature[2], which converts device tree to C for even
more constrained environments, would need to become aware of the
/options node
There is also the question about whether this needs to be U-Boot-specific,
or whether the tags could be generic. From what I can tell, U-Boot is the
only bootloader which seriously attempts to use a runtime device tree in
all cases. For this version, an attempt is made to name the phases in a
generic manner.
It should also be noted that the approach provided here has stood the test
of time, used in U-Boot for 8 years so far.
So add the schema for this. This will allow a major class of schema
exceptions to be dropped from the U-Boot source tree.
This has been applied upstream[3]
[1] https://u-boot.readthedocs.io/en/latest/develop/driver-model/index.html
[2] https://u-boot.readthedocs.io/en/latest/develop/driver-model/of-plat.html
[3] https://github.com/devicetree-org/dt-schema/commit/63bd847
Signed-off-by: Simon Glass <sjg@chromium.org>
i2c updates for v2023.04
- add new i2c driver ast2600 from Ryan Chen
- i2c-cdns: make read fifo-depth configurable through device tree
from Pei Yue Ho
- mxc i2c driver: print base address in hex, not in decimal
from Fabio
- mvebu: Support for 2 new Armada 385 boards (Tony)
- mvebu: Minor misc board enhancements (Tony)
- kirkwood: Serial driver fixes (Kconfig & dtsi) (Tony)
- cmd: return code when tlv_eeprom incorrectly called (Heinrich)
When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
required for this board to boot over UART with kwboot. Enable this in
kirkwood-pogoplug-series-4-u-boot.dtsi.
Added by Stefan while applying:
Please note that it's not fully understood, why this property really
is needed. Here a link to the discussion about this:
https://lore.kernel.org/r/20230201080210.ypz4nrj4y2igwxz3@pali/
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Synology DS116 is a NAS based on Marvell Armada 385 SoC.
Board Specification:
- Marvel MV88F6820 Dual Core at 1.8GHz
- 1 GiB DDR3 RAM
- 8MB Macronix mx25l6405d SPI flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 1x SATA (6 Gbps)
- 3x LED
- PIC16F1829 (connected to uart1)
- GPIO fan
- serial console
Note that this patch depends on the add-support for Thecus N2350 patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Currently, only the 1st SATA port is powered up (by GPIO1 12).
Add GPIO1 13 in board initialization to power up the 2nd SATA port.
Note that this patch depends on the initial add-support patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Sheevaplug board has 512K CONFIG_BOARD_SIZE_LIMIT. Recently, DM_SERIAL has
pushed the image size a few hundred bytes over that limit. So explicitly
deselect some configs that are unrelated to this board
(and gain back a bit over 2K).
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
CONFIG_SYS_NS16550 is required when DM_SERIAL is enabled for
Kirkwood boards.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
