Commit graph

864 commits

Author SHA1 Message Date
Wolfgang Denk
5c395393cc Merge branch 'master' of git://www.denx.de/git/u-boot-sh 2008-04-08 00:04:39 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b5873f1732 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-04-01 07:30:51 +02:00
Tor Krill
2d934ea51f Add Vitesse 8601 support to TSEC driver
Add phy_info for Vitesse VSC8601.
Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.

Signed-off-by: Tor Krill <tor@excito.com>
Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-03-31 23:11:46 -04:00
Daniel Hellstrom
3eac6402a5 SPARC: added SMC91111 driver in and out macros for LEON processors.
This patch makes SPARC/LEON processors able to read and write
to the SMC91111 chip using the chip external I/O bus of the memory
controller. This patchs defines the standard in and out macros
expected by the SMC9111 driver.

To access that I/O bus one must set up the memory controller
(MCTRL or FTMCTRL) correctly. It is assumed that the user sets
up this correctly when the other MCTRL parameters are set up. It
can be set up from the board configuration header file.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-03-31 23:11:33 -04:00
Stelian Pop
0176d43e75 Add support for AT91SAM9260EK
Support for booting from internal DataFlash, external DataFlash card
or NAND flash is available.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-04-01 01:46:12 +02:00
Stelian Pop
5604e2178c Cleanup DataFlash partition handling
DataFlash partition information has become a mess. This patch
defines a single partition scheme for Atmel DataFlashes. This partition
scheme will be used by all AT91CAP9 and AT91SAM9 boards.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-04-01 01:43:59 +02:00
Sascha Hauer
d6674e0e2a add SMSC LAN9x1x Network driver
This patch adds a driver for the following smsc network controllers:
LAN9115
LAN9116
LAN9117
LAN9215
LAN9216
LAN9217

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-03-30 11:32:21 +01:00
Sascha Hauer
8c8463cce4 add an i2c driver for mx31
This patch adds an i2c driver for Freescale i.MX processors

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-03-30 11:32:16 +01:00
Andre Schwarz
ac3315c26e new PHY @ e1000 - 2nd try
Add 82541ER device with latest integrated IGP2 PHY.
Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-03-30 00:37:08 -04:00
Daniel Hellstrom
c2b7da5522 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
a debug link (EDCL). The GRETH core is documented in GRIP.pdf
available at www.gaisler.com.

If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
offloading etc.) can be determined by a bit in the control register.
The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-03-30 00:33:28 -04:00
Tsi-Chung Liew
f605479de2 ColdFire: Fix FEC transmit issue for MCF5275
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-03-30 00:15:34 -04:00
Daniel Hellstrom
97bf85d784 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
SPARC CPUs implement flash_read64 which calls __raw_readq.

For current SPARC architectures (LEON2 and LEON3) each read from the
FLASH must lead to a cache miss. This is because FLASH can not be set
non-cacheable since program code resides there, and alternatively disabling
cache is poor from performance view, or doing a cache flush between each
read is even poorer.

Forcing a cache miss on a SPARC is done by a special instruction "lda" -
load alternative space, the alternative space number (ASI) is processor
implementation spcific and can be found by including <asm/processor.h>.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-03-29 06:51:04 +01:00
Tor Krill
90447ecbba MTD/CFI: Add support for 16bit legacy AMD flash
Add entry for 512Kx16 AMD flash to jedec_table.
Read out 16bit device id if chipwidth is 16bit.
Fixed coding style after Stefans feedback

Signed-off-by: Tor Krill <tor@excito.com>
2008-03-28 11:44:23 +01:00
Mark Jonas
4be9eb789e sh: Removed warning when compiling drivers/serial/serial_sh.c.
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:14 +09:00
Nobuhiro Iwamatsu
28e5efde4d sh: Add support PCI host driver for SH7751/SH7751R
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:13 +09:00
Nobuhiro Iwamatsu
ab8f4d40d0 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:13 +09:00
Nobuhiro Iwamatsu
5669332781 sh: Add support SuperH SH7751/SH7751R
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:12 +09:00
Nobuhiro Iwamatsu
3ecff1d70a sh: Fix receive FIFO level register of SH4A
Receive FIFO level register is different in SH4A.
Because register is different, cannot occasionally receive data.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:12 +09:00
Yusuke Goda
b55523efff sh: Add support SH7780
SH7780 is CPU of Renesas Technology.
This CPU has
 - CPU clock 400MHz
 - PCI support
 - DDR-SDRAM controller
 - etc ...

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:12 +09:00
Timur Tabi
d8c82db482 Add support for setting the I2C bus speed in fsl_i2c.c
Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
the I2C bus speed.  Current 8[356]xx boards define the CFG_I2C_SPEED macro,
but fsl_i2c.c ignores it and uses conservative value when programming the
I2C bus speed.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-03-27 00:09:17 +01:00
Wolfgang Denk
d049cc7f71 Coding style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-27 00:03:57 +01:00
Dave Liu
fd0b1fe3c3 drivers: add the support for Freescale SATA controller
Add the Freescale on-chip SATA controller driver to u-boot,
The SATA controller is used on the 837x and 8315 targets,
The driver can be used to load kernel, fs and dtb.

The features list:
- 1.5/3 Gbps link speed
- LBA48, LBA28 support
- DMA and FPDMA support
- Two ports support

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-03-26 23:38:58 +01:00
Dave Liu
ffc664e80d ata: add the libata support
add simple libata support in u-boot

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-03-26 23:38:53 +01:00
Dave Liu
8e9bb43429 ata: make the ata_piix driver using new SATA framework
original ata_piix driver is using IDE framework, not real
SATA framework. For now, the ata_piix driver is only used
by x86 sc520_cdp board. This patch makes the ata_piix driver
use the new SATA framework, so

- remove the duplicated command stuff
- remove the CONFIG_CMD_IDE define in the sc520_cdp.h
- add the CONFIG_CMD_SATA define to sc520_cdp.h

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-03-26 23:38:52 +01:00
Dave Liu
83c7f470a4 ata: merge the header of ata_piix driver
move the sata.h from include/ to drivers/block/ata_piix.h

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-03-26 23:38:50 +01:00
Dave Liu
9eef62804d ata: merge the ata_piix driver
move the cmd_sata.c from common/ to drivers/ata_piix.c,
the cmd_sata.c have some part of ata_piix controller drivers.
consolidate the driver to have better framework.

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-03-26 23:38:48 +01:00
Wolfgang Denk
5b5eb9ca5b Coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-26 15:38:47 +01:00
Joakim Tjernlund
da8808df7a Add CFG_RTC_DS1337_NOOSC to turn off OSC output
The default settings for RTC DS1337 keeps the OSC
output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
turn it off.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2008-03-26 15:17:42 +01:00
Wolfgang Denk
438a4c1126 Cleanup coding style, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-26 11:48:46 +01:00
Anton Vorontsov
c7604783b2 tsec: fix link detection for the RTL8211B PHY
RTL8211B sets link state register after autonegotiation complete,
so with bootdelay=0 RTL8211B will report lack of the link.

To fix this, we should wait for aneg to complete, even if the
link is currently down.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-25 19:16:48 -05:00
Anton Vorontsov
300615dc5d uec: add support for Broadcom BCM5481 Gigabit PHY
This patch adds basic support for Broadcom BCM5481 PHY.

RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
Peter Barada <peterb@logicpd.com>.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-03-25 19:16:46 -05:00
Anton Vorontsov
6a600c3a18 uec: add support for RGMII_RXID interface mode
PHY drivers will use it to setup software delay between RXD and RXC
signals.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-03-25 19:16:46 -05:00
Anton Vorontsov
91cdaa3a9d uec: add support for gbit mii status readings
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-03-25 19:16:45 -05:00
Timur Tabi
b55d98c6d5 NET: Add Vitesse VSC7385 firmware uploading
The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
and other boards.  A small firwmare must be uploaded to its on-board memory
before it can be enabled.  This patch adds the code which uploads firmware
(but not the firmware itself).

Previously, this feature was provided by a U-Boot application that was
made available only on Freescale BSPs.  The VSC7385 firmware must still
be obtained separately, but at least there is no longer a need for a separate
application.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2008-03-25 19:16:43 -05:00
Wolfgang Denk
aa6f6d171a Coding Style cleanyp; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-26 00:52:10 +01:00
Stefan Roese
22ed228574 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-26 00:06:19 +01:00
Kyungmin Park
1bb707c39a Add Flex-OneNAND booting support
Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
using a NOR Flash interface. This on-chip integration enables system designers
to reduce external system logic and use high-density NAND Flash
in applications that would otherwise have to use more NOR components.

Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
in more flexible way. While MLC area of Flex-OneNAND can be used to store data
that require low reliability and high density, SLC area of Flex-OneNAND
to store data that need high reliability and high performance. Flex-OneNAND
can let users take advantage of storing these two different types of data
into one chip, which is making Flex-OneNAND more cost- and space-effective.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-03-26 00:05:32 +01:00
goda.yusuke
6a8a5dc475 net: Add support AX88796L ethernet device
AX88796L is device of NE2000 compatible.
This patch support AX88796L ethernet device.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-25 22:55:15 +01:00
Wolfgang Denk
e0a6140dd3 ne2000 driver: change #ifdef to Makefile conditional compilation
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-25 22:50:41 +01:00
goda.yusuke
e710185aae net: Divided code of NE2000 ethernet driver
There are more devices of the NE2000 base.
A present code is difficult for us to support more devices.
To support more NE2000 clone devices, separated the function.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-25 22:48:58 +01:00
Mike Frysinger
395bce4f59 net/Blackfin: move on-chip MAC driver into drivers/net/
The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
directory, but it is not board specific, so relocate it to the drivers dir
so that other Blackfin ports can utilize it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-25 22:35:26 +01:00
Mike Frysinger
8a30b47009 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
Since the "ssync" instruction may have hardware anomalies associated with
it, have the smc91111 driver use the SSYNC macro rather than invoking it
directly.  We workaround all the anomalies via this macro.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-25 22:32:25 +01:00
Yuri Tikhonov
0d48926c87 lwmon5 SYSMON POST: fix backlight control
If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
run on the board, then the SYSMON POST controls the display backlight
(doesn't switch backlight ON if POST FAILED, and does switch the
backlight ON if PASSED).

If not, then the video driver controls the display backlight (just
switch ON the backlight upon initialization).

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-25 00:16:14 +01:00
Wolfgang Denk
b38d7fc2f1 Merge branch 'master' of /home/wd/git/u-boot/master/ 2008-03-25 00:12:54 +01:00
Nobuhiro Iwamatsu
55774b512f pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
In current source code, when the device number of PCI is 0, process PCI
bridge without fail. However, when the device number is 0, it is not PCI
always bridge. There are times when device of PCI allocates.

When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
use this patch.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Stefan Roese <sr@denx.de>
2008-03-23 01:38:22 +01:00
Wolfgang Denk
e334e05ba0 Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash 2008-03-23 00:53:43 +01:00
Yuri Tikhonov
b73a19e160 LWMON5: POST RTC fix
Modify the RTC API to provide one a status for the time reported by
the rtc_get() function:
  0 - a reliable time is guaranteed,
< 0 - a reliable time isn't guaranteed (power fault, clock issues,
      and so on).

The RTC chip drivers are responsible for providing this info if the
corresponding chip supports such functionality. If not - always
report that the time is reliable.

The POST RTC test was modified to detect the RTC faults utilizing
this new rtc_get() feature.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-20 21:48:46 +01:00
Stefan Roese
f0105727d1 CFI: Small cleanup for FLASH_SHOW_PROGRESS
With this patch we don't need that many #ifdef's in the code. It moves
the subtraction into the macro and defines a NOP-macro when
CONFIG_FLASH_SHOW_PROGRESS is not defined.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
2008-03-19 13:41:25 +01:00
Jerry Van Baren
9a042e9ca5 Flash programming progress countdown.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-03-19 13:41:25 +01:00
Wolfgang Denk
e95bcc3661 Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Conflicts:

	drivers/rtc/Makefile

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-16 01:50:18 +01:00
Wolfgang Denk
c136724cda drivers/rtc/Makefile: keep list sorted
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-16 01:22:59 +01:00
Tor Krill
9536dfcce0 Add support for Intersil isl1208 RTC
Signed-off-by: Tor Krill <tor@excito.com>
2008-03-16 01:21:30 +01:00
Stefan Roese
2596f5b9d3 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
way a board just needs to define this new option to enable the "force
NoPowerSwitching mode" instead of adding new CPU/architecture defines
to the USB source itself.

This new option will be used first with the new AMCC 460EX Canyonlands
board port, which will be posted in a few days.

This patch also fixes a small compilation problem when DEBUG is enabled.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:05 +01:00
Stefan Roese
88aff62df3 rtc: Add M41T62 support
This patch add support for the STM M41T62 RTC. It is used and tested
on the AMCC Canyonlands 406EX platform.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:03 +01:00
Nobuhiro Iwamatsu
d75469d48c net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
When rtl_recv() of rtl8169 is called, OWNbit of status register
is not enable occasionally.
rtl_recv() doesn't work normally when the driver doesn't do
appropriate processing.
This patch fix this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-08 10:59:27 +01:00
Kim Phillips
f30b6154f1 net: uec_phy: actually increment the timeout counter
allow u-boot to recover (and, e.g., switch to another interface) in the
case where a PHY does not report autonegotiation is complete within its
two second timeout value.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-07 12:47:08 -06:00
Timur Tabi
491fb6dea9 fix QE firmware uploading limit
Fix a typo in qe_upload_firmware() that prevented uploading firmware on
systems with more than one RISC core.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-03-03 22:10:11 +01:00
Kim Phillips
f655adef65 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
erratum 5.6 states the autoneg completion bit is functional only if the
autoneg bit is asserted.

This fixes any secondarily-issued networking commands on non-gigabit
links on the mpc8360 mds board.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-02 21:52:15 +01:00
Larry Johnson
d01b847c5c LM75 bug fix for negative temperatures
When the LM75 temperature sensor measures a temperature below 0 C, the
current driver does not perform sign extension, so the result returned is
256 C too high.  This patch fixes the problem.

Signed-off-by: Larry Johnson <lrj@acm.org>
2008-02-22 16:33:09 +01:00
Wolfgang Denk
45d65b7f28 Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash 2008-02-22 13:02:10 +01:00
Jean-Christophe PLAGNIOL-VILLARD
e845e07e1e uli526x: Fix multiple differ in signedness and parentheses around comparison
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-22 12:10:59 +01:00
Michael Schwingen
1ba639da56 CFI: Do not use uninitialized cmd_reset
Do not use uninitialized cmd_reset; issue both AMD and Intel reset
commands instead

From a short test, it looks like AMD-style flash roms treat *any* unknown
command write as a reset, at least when in CFI Query mode, so issuing the
Intel reset command to AMD-style flashs seems safe (from the small sample I
have), plus the 3-cycle magic sequence should kick the state machine into
the right state even without a reset command. Since the AMD-style flashs
require the unlock sequence for real operation, I chose to try the AMD reset
command first, so that Intel flashs do no see an invalid command prior to
the CFI query.

I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
plus Intel StrataFlash.

Signed-off-by: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-02-21 17:12:19 +01:00
Wolfgang Denk
5db6138565 Merge branch 'master' of git://www.denx.de/git/u-boot-arm 2008-02-16 00:42:44 +01:00
Anatolij Gustschin
30c6a241e8 Wipe out assembler warnings while compiling x86 biosemu
This patch tries to get rid of some assembler warnings about
changed .got2 section type while compiling x86 bios emulator
code.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-02-16 00:31:16 +01:00
Peter Pearse
ae92069abe Merge branch '080116_at91cap9' of git://linux-arm.org/u-boot-armdev 2008-02-15 12:59:15 +00:00
Anatolij Gustschin
e5c6f9f8be Add Radeon Mobility 9200 pci device id to the radeon driver
This patch extends PCI device id table of the
radeon driver so that the driver will also support
Radeon Mobility 9200 (M9+) based boards.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-02-15 00:54:29 +01:00
Anatolij Gustschin
1b8607e1f7 Extend ATI Radeon driver to support more video modes
Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
800x600, 640x480 at 24, 16 and 8 bpp.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2008-02-15 00:54:01 +01:00
Wolfgang Denk
9e04a81388 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xx
Conflicts:

	common/cmd_reginfo.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-15 00:26:52 +01:00
Wolfgang Denk
6f99eec3dc Merge branch 'master' of git://www.denx.de/git/u-boot-blackfin
Conflicts:

	Makefile
	doc/README.standalone

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-15 00:06:18 +01:00
Vlad Lungu
dd24058407 Use #ifdef CONFIG_FSLDMAFEC
MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
fails

Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2008-02-14 22:13:28 +01:00
Jon Loeliger
746c4b9490 Merge commit 'wd/master' 2008-02-14 14:07:21 -06:00
Stelian Pop
7263ef191b AT91CAP9 support : MACB changes
Signed-off-by: Stelian Pop <stelian <at> popies.net>
Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
2008-02-14 09:37:58 +00:00
Stelian Pop
20b197c6f2 AT91CAP9 support : build integration
Signed-off-by: Stelian Pop <stelian@popies.net>
2008-02-14 09:37:57 +00:00
Stelian Pop
d49fe4bed5 Improve DataFlash CS definition.
Use a structure instead of the error prone unnamed array to
define the possible dataflash banks.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-02-14 09:37:56 +00:00
Jean-Christophe PLAGNIOL-VILLARD
1b76988175 Fix remaining CONFIG_COMMANDS
update comments
Fix coding style

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-14 01:11:00 +01:00
Kumar Gala
3cfb0c51b2 Remove duplicate defines for ARRAY_SIZE
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-14 00:43:02 +01:00
Stelian Pop
c77ce474b1 Fix incorrect address test in AT91F_DataflashSelect().
Signed-off-by: Stelian Pop <stelian@popies.net>
2008-02-14 00:37:23 +01:00
Jon Loeliger
d075eec500 Merge commit 'wd/master' 2008-02-13 16:03:20 -06:00
Wolfgang Denk
10bbb38a40 Merge branch 'master' of /home/wd/git/u-boot/custodians 2008-02-12 00:56:25 +01:00
Kumar Gala
69018ce2e0 QE: Move FDT support into a common file
Move the flat device tree setup for QE related devices into
a common file shared between 83xx & 85xx platforms that have QE's.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-12 00:36:21 +01:00
Mike Frysinger
b58d8b48e2 rewrite/cleanup Blackfin RTC driver
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04 19:26:57 -05:00
Mike Frysinger
d4d7730853 punt Blackfin VDSP headers and import sanitized/auto-generated ones
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-02-04 19:26:55 -05:00
Wolfgang Denk
7ec8bb15ee OMAP5912: fix FIFO handling in UART driver
According to the OMAP5912 Serial Interfaces Reference Guide (see
http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
changed when the baud clock is not running, i. e. when both DLL and
DLH are set to 0.

Thus make sure that DLL and DLH are 0 when writing the FCR.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-05 00:04:15 +01:00
Ben Warren
8931ab1760 Fix conditional compilation of mpx8xxx_spi driver
This driver should only compile if CONFIG_MPC8XXX_SPI is set

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-29 11:53:00 -06:00
Becky Bruce
ddcebcb638 86xx: Add print_laws function to fsl_law.c
This can be used for debug, and will be used by board code
to help implement reginfo.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:51 -06:00
Wolfgang Denk
b0e49b4cd8 Merge ../custodians 2008-01-23 14:35:32 +01:00
Wolfgang Denk
351080e2e8 Merge branch 'master' of git://www.denx.de/git/u-boot-sh 2008-01-23 14:35:26 +01:00
Wolfgang Denk
865f0f9754 Coding Style Cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-23 14:31:17 +01:00
Wolfgang Denk
e57ed96bac Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire 2008-01-23 14:23:13 +01:00
Wolfgang Denk
2468592d79 Merge branch 'master' of git://www.denx.de/git/u-boot-net 2008-01-23 14:20:49 +01:00
Wolfgang Denk
39166b5c9e Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx 2008-01-23 13:56:55 +01:00
Andy Fleming
6ea66a818d Merge branch 'kumar' 2008-01-17 15:52:38 -06:00
TsiChungLiew
777d1abd97 ColdFire: Add MCF547x_8x FEC driver
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:42 -06:00
TsiChungLiew
72f56adc0b ColdFire: Add MCF547x_8x dma code and header files
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:42 -06:00
TsiChungLiew
ce09fc49b5 ColdFire: Add MCF547x_8x dma code - 2
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:42 -06:00
TsiChungLiew
11865ea844 ColdFire: Add MCF547x_8x dma code - 1
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:42 -06:00
Kim Phillips
2956acd5ef codingstyle cleanup for spi driver
..and rm unused CONFIG_FSL_SPI define

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-17 14:01:59 -06:00
Ben Warren
04a9e1180a Add support for a Freescale non-CPM SPI controller
This patch adds support for the SPI controller found on Freescale PowerPC
processors such as the MCP834x family.  Additionally, a new config option,
CONFIG_HARD_SPI, is added for general purpose SPI controller use.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-17 11:02:25 -06:00
Nobuhiro Iwamatsu
ac331da07d sh: Update SuperH SCIF driver
This patch fixed wrong SH7720 CPU macro and changed macro that
calculated value of SCBRR register.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-01-17 17:34:19 +09:00
Kumar Gala
83d40dfd79 85xx: Move LAW init code into C
Move the initialization of the LAWs into C code and provide an API
to allow modification of LAWs after init.

Board code is responsible to provide a law_table and num_law_entries.

We should be able to use the same code on 86xx as well.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-16 23:21:55 -06:00
Shinya Kuribayashi
c2f896b8fc drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
rx_status on the memory is basically in LE, but needs to be handled in CPU
endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
it'll work fine.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Cc: Masami Komiya <mkomiya@sonare.it>
Cc: Lucas Jin <lucasjin@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-16 17:37:35 -05:00
Shinya Kuribayashi
96a236746f drivers/net/rtl8139.c: Fix cache coherency issues
Current driver is meant for cache coherent systems. This patch adds
flush_cache() routines to support cache non-coherent systems.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Cc: Masami Komiya <mkomiya@sonare.it>
Cc: Lucas Jin <lucasjin@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-16 17:37:35 -05:00
Shinya Kuribayashi
d1276c76c1 drivers/net/rtl8139.c: Fix tx timeout
"to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
does, the condition "(currticks() < to)" becomes invalid and immediately
leads to tx timeout error. This patch introduces the fine-graded udely(10)
loops to ease the impact of wrapping around.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Cc: Masami Komiya <mkomiya@sonare.it>
Cc: Lucas Jin <lucasjin@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-16 17:37:35 -05:00
Dave Liu
18ee320ff6 TSEC: Add the support for RealTek RTL8211B PHY
Add the support of RealTek RTL8211B PHY, the RTL8211B
PHY only supports RGMII and MII mode.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-16 17:05:52 -05:00
Joakim Tjernlund
84a3047b72 Remove annoying debug printout for PHY less boards.
PHY less board prints out lots of "read wrong ...":
read wrong value : mii_id 3,mii_reg 2, base e0102320
read wrong value : mii_id 3,mii_reg 3, base e0102320
UEC: PHY is Generic MII (ffffffff)
read wrong value : mii_id 3,mii_reg 4, base e0102320
read wrong value : mii_id 3,mii_reg 0, base e0102320
read wrong value : mii_id 3,mii_reg 1, base e0102320
read wrong value : mii_id 3,mii_reg 1, base e0102320
read wrong value : mii_id 3,mii_reg 5, base e0102320
read wrong value : mii_id 3,mii_reg 1, base e0102320
read wrong value : mii_id 3,mii_reg 1, base e0102320
read wrong value : mii_id 3,mii_reg 5, base e0102320
FSL UEC0: Full Duplex
FSL UEC0: Speed 100BT
FSL UEC0: Link is up
Using FSL UEC0 device

Make this printout depend on UEC_VERBOSE_DEBUG and
remove its definition in uec_phy.c

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-16 16:56:57 -05:00
Kim Phillips
ee62ed3286 net: reduce boot latency on QE UEC based boards
actually polling for PHY autonegotiation to finish enables us to remove the
5 second boot prompt latency present on QE based boards.

call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
code shamelessly stolen from tsec driver.

also rm unused CONFIG_RMII_MODE code.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-16 16:54:20 -05:00
michael.firth@bt.com
55fe7c57a8 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
The current TSEC driver limits MDIO access to the devices that have been configured as attached
to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.

Signed-off-by: Michael Firth <michael.firth@bt.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-16 16:51:35 -05:00
Wolfgang Denk
e715888010 Merge branch 'master' of git://www.denx.de/git/u-boot-sh 2008-01-16 22:11:08 +01:00
Anton Vorontsov
cd9d23053d nand: FSL UPM NAND driver
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-01-16 14:14:40 +01:00
Kyungmin Park
6cb2239ae7 OneNAND: Separate U-Boot dependent code from OneNAND
OneNAND: Separate U-Boot dependent code from OneNAND

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-01-16 14:10:15 +01:00
David Saada
2465665b73 QE UEC: Extend number of supported UECs to 4
This patch extends the number of supported UECs to 4. Note that the
problem of QE thread resources exhaustion is resolved by setting the
correct number of QE threads according to Ethernet type (GBE or FE).

Signed-off-by: David Saada <david.saada@ecitele.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-15 23:08:58 -05:00
Nobuhiro Iwamatsu
f91d7ae5ca pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-01-15 23:30:40 +09:00
Nobuhiro Iwamatsu
76e49aa7fb sh: Add support SH7710/SH7712
SH7710/SH7712 of SH3 CPU are supported.
SH771X is called SH-Ether, and has the Ether controller in CPU.
The driver of Ether is not included in this patch.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-01-15 23:30:40 +09:00
Yoshihiro Shimoda
7c10c57275 sh: Add support for SH7720 in serial_sh driver.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-01-15 23:30:40 +09:00
Dave Liu
06c428bcd4 QE: fix compile warning
qe.c: In function 'qe_upload_firmware':
qe.c:390: warning: pointer targets in passing argument 2
uec.c: In function 'uec_initialize':
uec.c:1236: warning: 'uec_info' may be used uninitialized

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-01-14 10:34:30 +01:00
Michael Schwingen
8225d1e3ac CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Acked-by: Stefan Roese <sr@denx.de>
2008-01-13 15:07:26 +01:00
TsiChung Liew
3afac79ec2 USB: Add Philips 1561 PCI-OHCI ids
(needed for M5475EVB)

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2008-01-12 15:54:33 +01:00
Larry Johnson
92fa37eac5 Remove superfluous preprocessor conditionals from LM73 driver
(1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".

(2) Use conditional Makefile.o.

Signed-off-by: Larry Johnson <lrj@acm.org>
2008-01-12 00:26:47 +01:00
Anatolij Gustschin
bed53753dd Add Fujitsu CoralP/Lime video driver
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
2008-01-11 16:05:36 +01:00
Anatolij Gustschin
20c450ef61 Fix video console newline and carriage return handling
Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
are not displayed correctly. This is an attempt to fix
this issue. Also add carriage return handling.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
2008-01-11 16:04:46 +01:00
Ben Warren
422b1a0160 Fix Ethernet init() return codes
Change return values of init() functions in all Ethernet drivers to conform
to the following:

    >=0: Success
    <0:  Failure

All drivers going forward should return 0 on success.  Current drivers that
return 1 on success were left as-is to minimize changes.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-By: Timur Tabi <timur@freescale.com>
2008-01-10 01:06:02 +01:00
Wolfgang Denk
d3a6532cbe Coding Style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-10 00:55:14 +01:00
Timur Tabi
b8ec238503 85xx: add ability to upload QE firmware
Define the layout of a binary blob that contains a QE firmware and instructions
on how to upload it.  Add function qe_upload_firmware() to parse the blob and
perform the actual upload.  Add command-line command "qe fw" to take a firmware
blob in memory and upload it.  Update ft_cpu_setup() on 85xx to create the
'firmware' device tree node if U-Boot has uploaded a firmware.  Fully define
'struct rsp' in immap_qe.h to include the actual RISC Special Registers.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-01-09 16:28:12 -06:00
Marcel Ziswiler
10c7382bc5 fix various comments
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-01-09 21:50:47 +01:00
Marcel Ziswiler
7817cb2083 fix comments with new drivers organization
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-01-09 21:48:49 +01:00
Guennadi Liakhovetski
6a5e1d75bf Fix endianness conversions in rtl8169 driver
It is unclear on what platforms this driver has been tested, since
noone up to now defines CONFIG_RTL8169 in the board configuration
header. Now it has been fixed for a big-endian mpc8241 based
linkstation platform. This patch presents the necessary endianness
conversion fixes.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-01-09 14:37:01 +01:00
Matthias Fuchs
95c6bc7d4a Add Epson RX8025 RTC support
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 13:29:27 +01:00
Joakim Tjernlund
ccf21c311e Add support CONFIG_UEC_ETH3 in MPC83xx
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2008-01-08 09:55:41 -06:00
Dave Liu
19580e660c mpc83xx: Add the support of MPC837xEMDS board
The MPC837xEMDS board support:
* DDR2 400MHz hardcoded and SPD init
* Local bus NOR Flash
* I2C, UART, MII and RTC
* eTSEC RGMII
* PCI host

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-01-08 09:55:39 -06:00
Stefan Roese
ce37422d00 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
flash chips connected to a 32bit wide port.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-01-02 16:07:01 +01:00
Wolfgang Denk
d2995fe392 Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash 2008-01-02 11:30:58 +01:00
Stefan Roese
bb701283a8 Merge branch 'master' of /home/stefan/git/u-boot/u-boot into for-1.3.2-ver2 2007-12-27 19:37:26 +01:00
Larry Johnson
9e2c347151 Add driver for National Semiconductor LM73 temperature sensor
This driver is based on the driver for the LM75.

Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27 19:35:35 +01:00
Larry Johnson
1261827868 Add driver for STMicroelectronics M41T60 RTC
This driver is based on the driver for the M41T11.  In the intended
application, the RTC will be powered by a large capacitor, rather than a
battery.  The driver therefore checks to see whether the RTC has lost
power.  The chip's OUT bit is normally reset from its power-up state.  If
the OUT bit is read as set, or if the date and time are not valid, then the
RTC is assumed to have lost power, and its date and time are reset to
1900-01-01 00:00:00.

Support for adjusting the speed of the clock to improve accuracy is
provided through an environment variable.

Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27 19:35:35 +01:00
Stefan Roese
0dc80e2759 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
The check for an sufficiently erased destination was missing in the
buffered write function of the cfi flash driver (when
CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
writing to such a region will fail with the currect error message.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27 07:50:54 +01:00
Wolfgang Denk
61fb15c516 Fix coding style issues; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-12-27 01:52:50 +01:00
Wolfgang Denk
6e1bbe6e3e Merge branch 'master' of /home/wd/git/u-boot/custodians 2007-12-27 01:13:05 +01:00
Wolfgang Denk
81b38be863 Merge branch 'master' of git://www.denx.de/git/u-boot-sh
Conflicts:

	MAINTAINERS

Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-12-27 01:12:56 +01:00
Wolfgang Denk
3f523edb14 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx 2007-12-27 00:35:03 +01:00
Haavard Skinnemoen
467bcee11f cfi_flash: Add manufacturer-specific fixups
Run fixups based on the JEDEC manufacturer ID independent of the
command set ID.

This changes current behaviour: Previously, geometry reversal for AMD
chips were done based on the command set ID, while they are now done
based on the JEDEC manufacturer and device ID.

Also add fixup for top-boot Atmel chips. A fixup is needed for
AT49BV6416(T) too, but since u-boot currently only reads the low byte
of the device ID, there's no way to tell it apart from AT49BV642D,
which should not have this fixup. Since AT49BV642D support is
necessary to get ATNGW100 board support into mainline, I've commented
out the fixup for now.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 15:48:38 +01:00
Haavard Skinnemoen
0ddf06ddf6 cfi_flash: Add cmdset-specific init functions
Move things like reading JEDEC IDs and fixing up geometry reversal
into separate functions. The geometry reversal fixup is now performed
by altering the qry structure directly, which makes the sector init
code slightly cleaner.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 15:48:31 +01:00
Haavard Skinnemoen
e23741f4a6 cfi_flash: Read whole QRY structure in one go
Read out the whole CFI Standard Query structure after successful cfi
identification. This allows subsequent code to access this information
directly without having to go through flash_read_uchar() and friends.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-17 15:48:25 +01:00
Haavard Skinnemoen
12d30aa797 cfi_flash: Use map_physmem() and unmap_physmem()
Use map_physmem() and unmap_physmem() to convert from physical to
virtual addresses. This gives the arch a chance to provide an uncached
mapping for flash accesses.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:15:22 +01:00
Haavard Skinnemoen
cdbaefb5f5 cfi_flash: Introduce read and write accessors
Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
them to access the flash memory. This makes it clearer when the flash
is actually being accessed; merely dereferencing a volatile pointer
looks just like any other kind of access.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:15:11 +01:00
Haavard Skinnemoen
be60a9021c cfi_flash: Reorder functions and eliminate extra prototypes
Reorder the functions in cfi_flash.c so that each function only uses
functions that have been defined before it. This allows the static
prototype declarations near the top to be eliminated and might allow
gcc to do a better job inlining functions.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:14:55 +01:00
Haavard Skinnemoen
3055793bcb cfi_flash: Make some needlessly global functions static
Make functions not declared in any header file static.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:12:46 +01:00
Haavard Skinnemoen
7e5b9b4715 cfi_flash: Break long lines
This patch tries to keep all lines in the cfi_flash driver below 80
columns. There are a few lines left which don't fit this requirement
because I couldn't find any trivial way to break them (i.e. it would
take some restructuring, which I intend to do in a later patch.)

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:11:45 +01:00
Bartlomiej Sieka
42026c9cb3 CFI: synchronize command offsets with Linux CFI driver
Fixes non-working CFI Flash on the Inka4x0 board.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-12-13 12:00:37 +01:00
Kumar Gala
8ff3de61fc Handle MPC85xx PCIe reset errata (PCI-Ex 38)
On the MPC85xx boards that have PCIe enable the PCIe errata fix.
(MPC8544DS, MPC8548CDS, MPC8568MDS).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Stefan Roese
8809a2713b rtc: Fix merging problem
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-11 11:46:01 +01:00
Stefan Roese
9caeaadf50 Merge commit 'u-boot/master' into for-1.3.1
Conflicts:

	drivers/rtc/Makefile
2007-12-11 11:34:54 +01:00
Stefan Roese
9692c2734a CFI: Coding style cleanup
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-08 08:25:09 +01:00
Michael Schwingen
81b20ccc2d CFI: support JEDEC flash roms in CFI-flash framework
The following patch adds support for non-CFI flash ROMS, by hooking into the
CFI flash code and using most of its code, as recently discussed here in the
thread "Mixing CFI and non-CFI flashs".

Signed-off-by: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-08 08:16:50 +01:00
Nobuhiro Iwamatsu
29592ecba3 sh: Moved driver of the SuperH dependence
The composition of the directory in the drivers/ changed.
I moved SuperH serial driver and marubun PCMCIA driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-12-07 01:25:38 +09:00
Nobuhiro Iwamatsu
521dcd30b9 Merge git://www.denx.de/git/u-boot
Conflicts:

	drivers/Makefile
2007-12-07 01:20:16 +09:00
Nobuhiro Iwamatsu
33ecdc2f9d sh: Add marubun's pcmcia driver
Marubun pcmcia is a chip for PCMCIA used with SuperH.
Of course, this can be used even by other architectures.
When use this driver, came to be able to use CompactFlash
and Ethernet.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-11-29 01:17:43 +09:00
Nobuhiro Iwamatsu
febd86b969 sh: Update SuperH SCIF driver
- Changed volatile unsigned to vu_.
- Changed Makefile for kconfig.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2007-11-29 01:17:31 +09:00
Nobuhiro Iwamatsu
7fc792895b Merge git://www.denx.de/git/u-boot
Conflicts:

	drivers/Makefile
2007-11-29 00:56:37 +09:00
Jean-Christophe PLAGNIOL-VILLARD
59829cc189 drivers/mtd : move mtd drivers to drivers/mtd
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:52 +01:00
Jean-Christophe PLAGNIOL-VILLARD
318c0b9043 drivers/misc : move misc drivers to drivers/misc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:51 +01:00
Jean-Christophe PLAGNIOL-VILLARD
33daf5b785 drivers/block : move block drivers to drivers/block
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:51 +01:00
Jean-Christophe PLAGNIOL-VILLARD
0c698dcaa7 drivers/rtc : move rtc drivers to drivers/rtc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:50 +01:00
Jean-Christophe PLAGNIOL-VILLARD
f868cc5a50 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:50 +01:00
Jean-Christophe PLAGNIOL-VILLARD
16b195c82a drivers/input : move input drivers to drivers/input
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:49 +01:00
Jean-Christophe PLAGNIOL-VILLARD
e455866629 drivers/usb : move usb drivers to drivers/usb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:27:38 +01:00
Jean-Christophe PLAGNIOL-VILLARD
1378df792a drivers/serial : move serial drivers to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:24:16 +01:00
Jean-Christophe PLAGNIOL-VILLARD
2439e4bfa1 drivers/net : move net drivers to drivers/net
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 18:35:17 +01:00
Jean-Christophe PLAGNIOL-VILLARD
352d259130 drivers/video : move video drivers to drivers/video
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 18:35:11 +01:00
Jean-Christophe PLAGNIOL-VILLARD
7364621718 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-24 20:35:56 +01:00
Jean-Christophe PLAGNIOL-VILLARD
93a686ee9c drivers/pci : move pci drivers to drivers/pci
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-24 20:35:55 +01:00
Jean-Christophe PLAGNIOL-VILLARD
080c646dbf drivers/i2c : move i2c drivers to drivers/i2c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-20 20:14:18 +01:00
Grant Likely
f92edbd8a0 Merge branch 'origin' into kconfig-for-1.3.1 2007-11-20 08:19:56 -07:00
Wolfgang Denk
e8da58f2bc Fix build problems with mp2usb board
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-19 12:59:14 +01:00
Wolfgang Denk
8412d814ce Fix compiler warnings for ARM systems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-18 17:11:09 +01:00
Wolfgang Denk
409ecdc0bb Fix compiler warnings for PPC systems. Update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-18 16:36:27 +01:00
Grant Likely
efe33035ac Merge branch 'origin' into kconfig-for-1.3.1
Conflicts:

	drivers/Makefile
2007-11-16 21:01:19 -07:00
Grant Likely
4d4faae65e Group PCI and PCMCIA drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:31:23 -07:00
Grant Likely
5798f87dc1 Group block/flash drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:22:48 -07:00
Grant Likely
df58c81551 Group USB drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:22:48 -07:00
Grant Likely
5dbb6ed622 Group i2c drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:22:37 -07:00
Grant Likely
ec00c76de0 Group console drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:21:54 -07:00
Grant Likely
754f230aa0 Group network drivers in drivers/Makefile
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:06:02 -07:00
Grant Likely
f0037c56b0 Build: split COBJS value into multiple lines
This change is in preparation for condtitionial compile support in the
build system.  By spliting them all into seperate lines now, subsequent
patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
be less invasive and easier to review

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:05:18 -07:00
Roy Zang
1f103105a3 Implement general ULi 526x Ethernet driver support in U-boot
This patch implements general ULi 526x Ethernet driver.
Until now, it is the only native Ethernet port on
MPC8610HPCD board, but it could be used on other boards
with ULi 526x Ethernet port as well.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-06 10:26:39 -05:00
Vlad Lungu
ec22755799 Trimmed some variables in ne2000.c
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2007-11-03 22:23:10 +01:00
Wolfgang Denk
f0516920f6 Merge branch 'master' of /home/wd/git/u-boot/custodians 2007-11-02 15:09:10 +01:00
Wolfgang Denk
dbf3317623 Merge branch 'master' of git://www.denx.de/git/u-boot-arm 2007-11-01 22:57:33 +01:00
Wolfgang Denk
5b746c3ea8 Merge branch 'master' of /home/wd/git/u-boot/custodians 2007-11-01 22:55:23 +01:00
Ed Swarthout
cb8250fe4b fsl_pci_init enable COMMAND_MEMORY if inbound window
Patch 16e23c3f removed PCSRBAR allocation.  But passing zero windows
to pciauto_setup_device has the side effect of not getting
COMMAND_MEMORY set.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2007-10-24 00:29:23 +02:00
Wolfgang Denk
41b4d282d3 Coding style: keep lists sorted; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-23 16:50:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
58b74b05c6 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-23 16:44:04 +02:00
Peter Pearse
7a9348728e Move PL01* serial drivers to drivers/serial and adjust Makefiles. 2007-10-23 10:22:16 +01:00
Wolfgang Denk
05bf4919c1 Minor coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-21 01:01:17 +02:00
Vlad Lungu
ff285ca07e Fix NE2000 driver:
Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
to do anything in eth_stop() if eth_init() was not called.
Simplified RX path in order to avoid timeouts on really really
fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
clever enough to cope with 1 packet per eth_rx().

Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2007-10-21 00:54:02 +02:00
Dan Wilson
5c7ea64bb7 tsec driver should clear RHALT on startup
This was causing problems for some people.

Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-10-19 11:33:48 -05:00
Wolfgang Denk
9e8362b689 Merge branch 'master' of git://www.denx.de/git/u-boot-usb 2007-10-15 20:55:51 +02:00
Wolfgang Denk
8f05a661e9 Merge branch 'merge' of git://www.denx.de/git/u-boot-microblaze 2007-10-13 22:57:43 +02:00
Wolfgang Denk
23c56f97ca Merge branch 'master' of git://www.denx.de/git/u-boot-nand-flash 2007-10-13 21:40:23 +02:00
Wolfgang Denk
de74b9eeac Coding Style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-10-13 21:15:39 +02:00
Peter Pearse
e81a95a9e7 Merge with git://www.denx.de/git/u-boot.git 2007-10-04 11:00:44 +01:00