Commit graph

45 commits

Author SHA1 Message Date
Patrick Delaunay
6af78d03d3 arm: stm32: cleanup arch gpio.h
Cosmetic update of gpio.h:
- remove enumerate: stm32_gpio_port, stm32_gpio_pin
  because STM32_GPIO_XXX values are unused
- move STM32_GPIOS_PER_BANK in stm32_gpio.c
  as its value is IP dependent and not arch dependent

No functional change as number of banks and number of gpio by banks
is managed by device tree since since DM migration and
commit 8f651ca60b ("pinctrl: stm32: Add get_pins_count() ops").

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-21 18:12:20 +02:00
Patrick Delaunay
bd3f60d29c arm: stm32mp: protect DBGMCU_IDC access with BSEC
As debugger must be totally closed on Sec closed chip,
the DBGMCU_IDC register is no more accessible (self
hosted debug is disabled with OTP).

This patch adds a function bsec_dbgswenable() to check
if the DBGMCU registers are available before to access them:
BSEC_DENABLE.DBGSWENABLE = self hosted debug status.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Patrick Delaunay
4e62642aef arm: stm32mp: add weak function to save vddcore
Add a weak functions to save the vddcore voltage value provided
in the OPP node when the clock tree is initialized.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-07 16:01:23 +02:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f09f1ecbe7 Use __ASSEMBLY__ as the assembly macros
Some places use __ASSEMBLER__ instead which does not work since the
Makefile does not define it. Fix them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Patrick Delaunay
8f035f7b48 stm32mp: stm32prog: adapt the MTD partitions
Dynamically adapt the MTD partitions in NOR/NAND/SPI-NAND when stm32prog
command detects in the parsed flash layout files:
- a fsbl partition in NOR.
- a tee partition in NOR/NAND/SPI-NAND

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
954bd1a923 stm32mp: add the command stm32prog
Add a specific command stm32prog for STM32MP soc family
witch allows to program the boot devices with the tool
STM32CubeProgrammer (http://www.st.com/STM32CubeProg).

This command uses the same UART STM32 protocol than MCU
STM32 with or USB with DFU protocol v1.1 (ithe MCU ST
extension are no supported).

The executed actions are based on a tab separated value file
with a stm32 header, the FlashLayout file
(https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout).

This file is parsed by the U-Boot command to:
- initialize the devices
- create the partition table on each device
- initialize the DFU backend to access to not volatile memory
  (NOR/NAND/SD/eMMC) or to virtual device (OTP/PMIC)

Up to STM32PROG_MAX_DEV (5) devices can be updated with a FlashLayout.

The communication between U-Boot and STM32CubeProgrammer is done with
the specific alternate configuration (see "AN5275: USB DFU/USART protocols
used in STM32MP1 Series bootloaders" for details).

The command stm32prog is executed when a boot from USB is detected
(selected with bootpins) and we can program the boot devices with
a simple command (on Windows or Linux):

PC $>  STM32_Programmer_CLI -c port=usb1 -w flaslayout.tsv

1/ the ROM code loads TF-A in embedded RAM (DFU or uart)
2/ TF-A loads flashlayout file and U-Boot in DDR (DFU or uart)
3/ U-Boot executes the stm32prog command (DFU or uart)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
7802a4495f stm32mp: add function get_cpu_dev
Add a function get_cpu_dev to get the DEV_ID present
in DBGMCU_IDC register.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
b664a74537 board: stm32mp1: support boot from spi-nand
Manage BOOT_FLASH_SPINAND, with boot_device="spi-nand"
and treat this value in bootcmd_stm32mp.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
cb25126801 ARM: dts: stm32: Define FMC2 base address
Define FMC2 base address, for use in board files, until there is an
actual FMC2 bus driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-15 09:08:29 +02:00
Patrick Delaunay
e9a20f8a19 ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDR
Need to increase the LPDDR2/LPDDR3 the voltage vdd2_ddr: buck2
form 1.2V to 1.25V for 32bits configuration.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:20:50 +01:00
Patrick Delaunay
050fed8a97 stm32mp1: add 800 MHz profile support
The STM32MP1 series is available in 3 different lines which are pin-to-pin
compatible:
- STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz,
              3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz
              and CAN FD
- STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz

Each line comes with a security option (cryptography & secure boot)
& a Cortex-A frequency option :

- A : Cortex-A7 @ 650 MHz
- C : Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D : Cortex-A7 @ 800 MHz
- F : Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz

This patch adds the support of STM32MP15xD and STM32MP15xF in U-Boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:16:33 +01:00
Patrick Delaunay
ac5e4d8af8 arm: stm32mp: add function get_soc_name
Add a function get_soc_name to get a string with the full name
of the SOC "STM32MP15xxx Rev.x"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:15:08 +01:00
Patrick Delaunay
718f7bf7ca arm: stm32mp: improve the error message for smc
Add the SMC code and operation for trace on errors.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:05:35 +01:00
Patrick Delaunay
7ae22d7278 arm: stm32mp: bsec: add permanent lock support in bsec driver
Add BSEC lock access (read / write) at 0xC0000000 offset of misc driver.
The write access only available for Trusted boot mode, based on new
SMC STM32_SMC_WRLOCK_OTP.

With the fuse command, the permanent lock status is accessed with
0x10000000 offset (0xC0000000 - 0x8000000 for OTP sense/program
divided by u32 size), for example:

Read lock status of fuse 57 (0x39)

  STM32MP> fuse sense 0 0x10000039 1

  Sensing bank 0:

  Word 0x10000039: 00000000

Set permanent lock of fuse 57 (0x39)

  STM32MP> fuse prog 0 0x10000039 1

  Sensing bank 0:

  Word 0x10000039: 00000000

WARNING: the OTP lock is updated only after reboot

WARING: Programming lock or fuses is an irreversible operation!
        This may brick your system.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:05:35 +01:00
Patrick Delaunay
cf0818b477 stm32mp1: support of STM32MP15x Rev.Z
Add support for Rev.Z of STM32MP15x cpu.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:31:08 +01:00
Patrick Delaunay
7915b9914e stm32mp1: pwr: use the last binding for pwr
Update the driver to use the latest binding from kernel v5.5-rc1:
no more use syscon or regmap to access to pwr register and
only one pwr_regulators node with the compatibility "st,stm32mp1,pwr-reg"
is available.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:26:22 +01:00
Marek Vasut
e71b9a64a2 ARM: stm32: Allow overriding setup_mac_address()
Let board code override setup_mac_address(), which is useful e.g. if the
board derives the MAC address from another source, like an I2C EEPROM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-17 11:44:42 +01:00
Fabien Dessenne
ee16c9a60b stm32mp1: declare backup registers for coprocessor
Use the backup register #17 as coprocessor resource table address and
backup register #18 as coprocessor state.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07 11:13:25 -05:00
Patrick Delaunay
178a415534 stpmic1: program pmic to keep only the debug unit on
Depending on backup register value, we maintain the debug unit
powered-on for debugging purpose.
Only BUCK1 is required for powering the debug unit, so revert
the setting for all the other power lanes, except BUCK3 that
has to be always on.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
24cb4587f4 stm32mp1: export get_cpu_package function
Prepare update of package information update
in Linux device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:18:53 +02:00
Patrick Delaunay
dfda7d4c83 stm32mp1: syscon: remove stgen
Reduce difference with kernel Linux device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:18:53 +02:00
Patrick Delaunay
72d18583a1 stm32mp1: syscon: remove etzpc support
Support for ETZPC is removed as this device is not present
in Linux kernel device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:18:53 +02:00
Patrick Delaunay
1767ac2d1f stm32mp1: ram: add support for LPDDR2/LPDDR3
Manage power supply configuration for board using stpmic1
with LPDDR2 or with LPDDR3:
+ VDD_DDR1 = 1.8V with BUCK3 (bypass if possible)
+ VDD_DDR2 = 1.2V with BUCK2

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:11 +02:00
Patrick Delaunay
3419982bc3 stm32mp1: add bootcount support
Activate bootcount and use TAMP register to store the count value.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:36:47 +02:00
Patrick Delaunay
bfe1f08f88 stm32mp1: bsec: use device tree new compatible
Update bsec driver to use the device tree provided by Kernel.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
6c09eb9e7e stm32mp1: add some syscon drivers for syscfg and etpzc
Add SYSCON driver for syscfg and etpzc and reorder in alphabetics order

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
9a2ba2838b stm32mp1: support forced boot mode
The boot mode can be forced by key press
or by TAMP register, requested in kernel by syscon-reboot-mode

tamp: tamp@5c00a000 {
	compatible = "simple-bus", "syscon", "simple-mfd";
	reg = <0x5c00a000 0x400>;

	reboot-mode {
		compatible = "syscon-reboot-mode";
		offset = <0x150>; /* reg20 */
		mask = <0xff>;
		mode-normal = <0>;
		mode-fastboot = <0x1>;
		mode-recovery = <0x2>;
		mode-stm32cubeprogrammer = <0x3>;
		mode-ums_mmc0 = <0x10>;
		mode-ums_mmc1 = <0x11>;
		mode-ums_mmc2 = <0x12>;
	};
};

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
35d568f090 stm32mp1: update print_cpuinfo()
Display CPU part number and package information.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
7f63c1e687 stm32mp1: update boot mode management
- export the function get_bootmode() and reused it in spl code
- manage uart instance by alias (prepare v4.19 binding)
- solve issue on nand instance
- restore console for uart boot

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
d461f10036 stm32mp1: display board information
Implement checkboard() function to display
- the boot chain used: basic or trusted
- the board compatible in device tree
- the board identifier and revision, saved in OTP59 for ST boards

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
d859c61139 stm32mp1: bsec: access with SMC for trusted boot
As BSEC is secure aware, all register access need to be done
by TF-A for TRUSTED boot chain, when U-Boot is executed in
normal world.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrice Chotard
b2f84e37e2 gpio: stm32f7: Move STM32_GPIOS_PER_BANK into gpio.h
To allow access to this define by other driver, move
it into gpio.h

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-07 08:13:47 -05:00
Patrice Chotard
dbf928dd26 gpio: stm32f7: Add gpio bank holes management
In some STM32 SoC packages, GPIO bank has not always 16 gpios.
Several cases can occur, gpio hole can be located at the beginning,
middle or end of the gpio bank or a combination of these 3
configurations.

For that, gpio bindings offer the gpio-ranges DT property which
described the gpio bank mapping.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-07 08:13:47 -05:00
Patrick Delaunay
19f589923a stm32mp1: add bsec driver
Add a MISC driver with read and write access to BSEC IP
(Boot and Security and OTP control)
- offset 0: shadowed values
- offset 0x80000000: OTP fuse box values (SAFMEM)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-26 18:19:18 -04:00
Patrick Delaunay
320d266368 stm32mp1: Allow to activate CONFIG_DEBUG_UART
Add the needed information to enable the debug uart
to have printf before the serial driver probe
(so before probe for clock, pincontrol and reset drivers)

To enable the debug on uart 4 (default console):
+ CONFIG_DEBUG_UART=y
+ CONFIG_DEBUG_UART_STM32=y

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-26 18:19:18 -04:00
Patrick Delaunay
e8b85e810a stm32mp: regulator: add SoC pwr regulator support
This driver binds and manages the following regulator of
SoC's PWR block :
  - reg11
  - reg18
  - usb33

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-08 09:07:38 -04:00
Patrick Delaunay
41c79775f0 arm: stm32mp1: add PSCI support
Add PSCI v1.0 support for Linux and manage PSCI state
for each CPU (affinity 0 level) with all mandatory functions:
- PSCI_VERSION
- CPU_SUSPEND
- CPU_OFF
- CPU_ON
- AFFINITY_INFO
- SYSTEM_OFF
- SYSTEM_RESET
- PSCI_FEATURES
and 1 optional to avoid Linux warning
- MIGRATE_INFO_TYPE

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: CITOOLS <smet-aci-reviews@lists.codex.cro.st.com>
2018-05-07 11:52:48 -04:00
Tom Rini
4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Patrick Delaunay
e16750ff0e stm32mp: add syscon for STGEN
Add STGEN as SYSCON device: allow access to device address
defined in device tree

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06 20:45:28 -04:00
Patrick Delaunay
08772f6e79 stm32mp1: get boot mode from BootRom
SPL copy BootRom boot mode information
in TAMP register 21.

This TAMP register information is used
after relocation to set 2 env variables
- boot_device
- boot_instance

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06 20:45:28 -04:00
Patrick Delaunay
96583cdc2d stm32mp: add check of cpu identifier
Add support of DBGMCU_IDC for cpu identifier
and revision

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-06 20:45:28 -04:00
Patrick Delaunay
e70f70aa65 ram: stm32mp1: add driver
Add driver and binding for stm32mp1 ddr controller and phy

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Patrick Delaunay
2514c2d0e6 arm: stm32: add new architecture for STM32MP family
- add new arch stm32mp for STM32 MPU/Soc based on Cortex A
- support for stm32mp157 SOC
- SPL is used as first boot stage loader
- using driver model for all the drivers, even in SPL
- all security feature are deactivated (ETZC and TZC)
- reused STM32 MCU drivers when it is possible

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00