u-boot/arch/arm/mach-uniphier/arm32/lowlevel_init.S

140 lines
3.6 KiB
ArmAsm
Raw Normal View History

/*
* Copyright (C) 2012-2015 Panasonic Corporation
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <linux/linkage.h>
#include <linux/sizes.h>
#include <asm/system.h>
ENTRY(lowlevel_init)
mov r8, lr @ persevere link reg across call
/*
* The UniPhier Boot ROM loads SPL code to the L2 cache.
* But CPUs can only do instruction fetch now because start.S has
* cleared C and M bits.
* First we need to turn on MMU and Dcache again to get back
* data access to L2.
*/
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache
mcr p15, 0, r0, c1, c0, 0
#ifdef CONFIG_DEBUG_LL
bl debug_ll_init
#endif
bl setup_init_ram @ RAM area for stack and page table
/*
* Now we are using the page table embedded in the Boot ROM.
* What we need to do next is to create a page table and switch
* over to it.
*/
bl create_page_table
bl __v7_flush_dcache_all
/* Disable MMU and Dcache before switching Page Table */
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache
mcr p15, 0, r0, c1, c0, 0
bl enable_mmu
mov lr, r8 @ restore link
mov pc, lr @ back to my caller
ENDPROC(lowlevel_init)
ENTRY(enable_mmu)
mrc p15, 0, r0, c2, c0, 2 @ TTBCR (Translation Table Base Control Register)
bic r0, r0, #0x37
orr r0, r0, #0x20 @ disable TTBR1
mcr p15, 0, r0, c2, c0, 2
orr r0, r12, #0x8 @ Outer Cacheability for table walks: WBWA
mcr p15, 0, r0, c2, c0, 0 @ TTBR0
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs
mov r0, #-1 @ manager for all domains (No permission check)
mcr p15, 0, r0, c3, c0, 0 @ DACR (Domain Access Control Register)
dsb
isb
/*
* MMU on:
* TLBs was already invalidated in "../start.S"
* So, we don't need to invalidate it here.
*/
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable
mcr p15, 0, r0, c1, c0, 0
mov pc, lr
ENDPROC(enable_mmu)
/*
* For PH1-Pro4 or older SoCs, the size of WAY is 32KB.
* It is large enough for tmp RAM.
*/
#define BOOT_RAM_SIZE (SZ_32K)
#define BOOT_RAM_BASE ((CONFIG_SPL_STACK) - (BOOT_RAM_SIZE))
#define BOOT_RAM_WAYS (0x00000100) @ way 8
#define SSCO_BASE 0x506c0000
#define SSCOPE 0x244
#define SSCOQM 0x248
#define SSCOQAD 0x24c
#define SSCOQSZ 0x250
#define SSCOQWN 0x258
#define SSCOPPQSEF 0x25c
#define SSCOLPQS 0x260
ENTRY(setup_init_ram)
ldr r1, = SSCO_BASE
/* Touch to zero for the boot way */
0: ldr r0, = 0x00408006 @ touch to zero with address range
str r0, [r1, #SSCOQM]
ldr r0, = BOOT_RAM_BASE
str r0, [r1, #SSCOQAD]
ldr r0, = BOOT_RAM_SIZE
str r0, [r1, #SSCOQSZ]
ldr r0, = BOOT_RAM_WAYS
str r0, [r1, #SSCOQWN]
ldr r0, [r1, #SSCOPPQSEF]
cmp r0, #0 @ check if the command is successfully set
bne 0b @ try again if an error occurs
1: ldr r0, [r1, #SSCOLPQS]
cmp r0, #0x4
bne 1b @ wait until the operation is completed
str r0, [r1, #SSCOLPQS] @ clear the complete notification flag
mov pc, lr
ENDPROC(setup_init_ram)
#define DEVICE 0x00002002 /* Non-shareable Device */
#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
ENTRY(create_page_table)
ldr r0, = DEVICE
ldr r1, = BOOT_RAM_BASE
mov r12, r1 @ r12 is preserved during D-cache flush
0: str r0, [r1], #4 @ specify all the sections as Device
adds r0, r0, #0x00100000
bcc 0b
ldr r0, = NORMAL
str r0, [r12] @ mark the first section as Normal
add r0, r0, #0x00100000
str r0, [r12, #4] @ mark the second section as Normal
mov pc, lr
ENDPROC(create_page_table)