Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-12 16:07:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/powerpc/cpu/mpc85xx/cmd_errata.c

266 lines
8 KiB
C
Raw Normal View History

powerpc/85xx: Add command to report errata workarounds Add 'errata' command to report what errata we workaround. Report workaround for erratum SATA-A001 on P1022/P1013. Also sorted the CONFIG_CMD_* list. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-10 03:59:41 +00:00
/*
fsl_esdhc: Add the workaround for erratum ESDHC111 (enable on P4080) Do not issue a manual asynchronous CMD12. Instead, use a (software) synchronous CMD12 or AUTOCMD12 to abort data transfer. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-07 05:42:19 +00:00
* Copyright 2010-2011 Freescale Semiconductor, Inc.
powerpc/85xx: Add command to report errata workarounds Add 'errata' command to report what errata we workaround. Report workaround for erratum SATA-A001 on P1022/P1013. Also sorted the CONFIG_CMD_* list. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-10 03:59:41 +00:00
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <linux/compiler.h>
#include <asm/processor.h>
powerpc/85xx: implement check for erratum A-004580 work-around The work-around for erratum A-004580 ("Internal tracking loop can falsely lock causing unrecoverable bit errors") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself. It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004580, we can do this by verifying that the values in the specific registers that the work-around says to update. This change requires access to the SerDes lane sub-structure in serdes_corenet_t, so we make it a named struct. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-01 08:20:23 +00:00
#include "fsl_corenet_serdes.h"
powerpc/85xx: Add command to report errata workarounds Add 'errata' command to report what errata we workaround. Report workaround for erratum SATA-A001 on P1022/P1013. Also sorted the CONFIG_CMD_* list. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-10 03:59:41 +00:00
powerpc/85xx: implement check for erratum A-004849 work-around The work-around for erratum A-004849 ("CoreNet fabric (CCF) can exhibit a deadlock under certain traffic patterns causing the system to hang") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself. It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004849, we can do this by verifying that the values in the specific registers that the work-around says to update. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-25 12:40:00 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
/*
* This work-around is implemented in PBI, so just check to see if the
* work-around was actually applied. To do this, we check for specific data
* at specific addresses in DCSR.
*
* Array offsets[] contains a list of offsets within DCSR. According to the
* erratum document, the value at each offset should be 2.
*/
static void check_erratum_a4849(uint32_t svr)
{
void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
unsigned int i;
#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
static const uint8_t offsets[] = {
0x50, 0x54, 0x58, 0x90, 0x94, 0x98
};
#endif
#ifdef CONFIG_PPC_P4080
static const uint8_t offsets[] = {
0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
};
#endif
uint32_t x108; /* The value that should be at offset 0x108 */
for (i = 0; i < ARRAY_SIZE(offsets); i++) {
if (in_be32(dcsr + offsets[i]) != 2) {
printf("Work-around for Erratum A004849 is not enabled\n");
return;
}
}
#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
x108 = 0x12;
#endif
#ifdef CONFIG_PPC_P4080
/*
* For P4080, the erratum document says that the value at offset 0x108
* should be 0x12 on rev2, or 0x1c on rev3.
*/
if (SVR_MAJ(svr) == 2)
x108 = 0x12;
if (SVR_MAJ(svr) == 3)
x108 = 0x1c;
#endif
if (in_be32(dcsr + 0x108) != x108) {
printf("Work-around for Erratum A004849 is not enabled\n");
return;
}
/* Everything matches, so the erratum work-around was applied */
printf("Work-around for Erratum A004849 enabled\n");
}
#endif
powerpc/85xx: implement check for erratum A-004580 work-around The work-around for erratum A-004580 ("Internal tracking loop can falsely lock causing unrecoverable bit errors") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself. It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004580, we can do this by verifying that the values in the specific registers that the work-around says to update. This change requires access to the SerDes lane sub-structure in serdes_corenet_t, so we make it a named struct. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-01 08:20:23 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
/*
* This work-around is implemented in PBI, so just check to see if the
* work-around was actually applied. To do this, we check for specific data
* at specific addresses in the SerDes register block.
*
* The work-around says that for each SerDes lane, write BnTTLCRy0 =
* 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
*/
static void check_erratum_a4580(uint32_t svr)
{
const serdes_corenet_t __iomem *srds_regs =
(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
unsigned int lane;
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
if (serdes_lane_enabled(lane)) {
const struct serdes_lane __iomem *srds_lane =
&srds_regs->lane[serdes_get_lane_idx(lane)];
/*
* Verify that the values we were supposed to write in
* the PBI are actually there. Also, the lower 15
* bits of res4[3] should be the same as the upper 15
* bits of res4[1].
*/
if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
(in_be32(&srds_lane->res4[1]) != 0x880000) ||
(in_be32(&srds_lane->res4[3]) != 0x40000044)) {
printf("Work-around for Erratum A004580 is "
"not enabled\n");
return;
}
}
}
/* Everything matches, so the erratum work-around was applied */
printf("Work-around for Erratum A004580 enabled\n");
}
#endif
powerpc/85xx: Add command to report errata workarounds Add 'errata' command to report what errata we workaround. Report workaround for erratum SATA-A001 on P1022/P1013. Also sorted the CONFIG_CMD_* list. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-10 03:59:41 +00:00
static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional This erratum applies to the following SoCs: P4080 rev 1.0, 2.0, fixed in rev 3.0 P2041 rev 1.0, 1.1, fixed in rev 2.0 P3041 rev 1.0, 1.1, fixed in rev 2.0. Workaround for erratum NMG_CPU_A011 is enabled by default. This workaround may degrade performance. P4080 erratum CPU22 shares the same workaround. So it is always enabled for P4080. For other SoCs, it can be disabled by hwconfig with syntax: fsl_cpu_a011:disable Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-08 18:04:53 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
extern int enable_cpu_a011_workaround;
#endif
powerpc/85xx: Add command to report errata workarounds Add 'errata' command to report what errata we workaround. Report workaround for erratum SATA-A001 on P1022/P1013. Also sorted the CONFIG_CMD_* list. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-10 03:59:41 +00:00
__maybe_unused u32 svr = get_svr();
#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
if (IS_SVR_REV(svr, 1, 0)) {
switch (SVR_SOC_VER(svr)) {
case SVR_P1013:
case SVR_P1022:
puts("Work-around for Erratum SATA A001 enabled\n");
}
}
#endif
powerpc/p4080: Add workaround for errata SERDES8 Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-13 05:39:46 +00:00
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8)
puts("Work-around for Erratum SERDES8 enabled\n");
#endif
p4080/serdes: Implement the XAUI workaround for SERDES9 erratum Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-09-01 03:57:38 +00:00
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9)
puts("Work-around for Erratum SERDES9 enabled\n");
#endif
powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005 SerDes PLL bandwidth default setting is incorrect when no lanes are configured as PCI Express. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-01 18:19:36 +00:00
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES_A005)
puts("Work-around for Erratum SERDES-A005 enabled\n");
#endif
powerpc/p4080: Add workaround for erratum CPU22 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-06 03:35:27 +00:00
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
powerpc/P4080: Check SVR for CPU22 workaround Workaround for erratum CPU22 applies to P4080 rev 1 and rev 2 only. Signed-off-by: York Sun <yorksun@freescale.com>
2012-05-07 07:26:45 +00:00
if (SVR_MAJ(svr) < 3)
puts("Work-around for Erratum CPU22 enabled\n");
85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN This config option is for an erratum workaround; rename it to be more clear. Also, drop it from config files don't need it and were undefining it. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-12-17 23:17:58 +00:00
#endif
powerpc/mpc85xx: Workaround for erratum CPU_A011 Erratum NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in rev 3.0. It also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1. It shares the same workaround as erratum CPU22. Rearrange registers usage in assembly code to avoid accidental overwriting. Signed-off-by: York Sun <yorksun@freescale.com>
2012-05-07 07:26:47 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
/*
* NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
* also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1
powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional This erratum applies to the following SoCs: P4080 rev 1.0, 2.0, fixed in rev 3.0 P2041 rev 1.0, 1.1, fixed in rev 2.0 P3041 rev 1.0, 1.1, fixed in rev 2.0. Workaround for erratum NMG_CPU_A011 is enabled by default. This workaround may degrade performance. P4080 erratum CPU22 shares the same workaround. So it is always enabled for P4080. For other SoCs, it can be disabled by hwconfig with syntax: fsl_cpu_a011:disable Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-08 18:04:53 +00:00
* The SVR has been checked by cpu_init_r().
powerpc/mpc85xx: Workaround for erratum CPU_A011 Erratum NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in rev 3.0. It also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1. It shares the same workaround as erratum CPU22. Rearrange registers usage in assembly code to avoid accidental overwriting. Signed-off-by: York Sun <yorksun@freescale.com>
2012-05-07 07:26:47 +00:00
*/
powerpc/mpc85xx: Make NMG_CPU_A011 workaround conditional This erratum applies to the following SoCs: P4080 rev 1.0, 2.0, fixed in rev 3.0 P2041 rev 1.0, 1.1, fixed in rev 2.0 P3041 rev 1.0, 1.1, fixed in rev 2.0. Workaround for erratum NMG_CPU_A011 is enabled by default. This workaround may degrade performance. P4080 erratum CPU22 shares the same workaround. So it is always enabled for P4080. For other SoCs, it can be disabled by hwconfig with syntax: fsl_cpu_a011:disable Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-08 18:04:53 +00:00
if (enable_cpu_a011_workaround)
powerpc/mpc85xx: Workaround for erratum CPU_A011 Erratum NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in rev 3.0. It also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1. It shares the same workaround as erratum CPU22. Rearrange registers usage in assembly code to avoid accidental overwriting. Signed-off-by: York Sun <yorksun@freescale.com>
2012-05-07 07:26:47 +00:00
puts("Work-around for Erratum CPU-A011 enabled\n");
#endif
powerpc/85xx: Add workaround for erratum CPU-A003999 Erratum A-003999: Running Floating Point instructions requires special initialization. Impact: Floating point arithmetic operations may result in an incorrect value. Workaround: Perform a read modify write to set bit 7 to a 1 in SPR 977 before executing any floating point arithmetic operation. This bit can be set when setting MSR[FP], and can be cleared when clearing MSR[FP]. Alternatively, the bit can be set once at boot time, and never cleared. There will be no performance degradation due to setting this bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-22 12:51:15 +00:00
#if defined(CONFIG_SYS_FSL_ERRATUM_CPU_A003999)
puts("Work-around for Erratum CPU-A003999 enabled\n");
#endif
powerpc/85xx: Add workaround for erratum A-003474 Erratum A-003474: Internal DDR calibration circuit is not supported Impact: Experience shows no significant benefit to device operation with auto-calibration enabled versus it disabled. To ensure consistent timing results, Freescale recommends this feature be disabled in future customer products. There should be no impact to parts that are already operating in the field. Workaround: Prior to setting DDR_SDRAM_CFG[MEM_EN]=1, do the following: 1. Write a value of 0x0000_0015 to the register at offset CCSRBAR + DDR OFFSET + 0xf30 2. Write a value of 0x2400_0000 to the register at offset CCSRBAR + DDR OFFSET + 0xf54 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-20 18:01:35 +00:00
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_A003474)
puts("Work-around for Erratum DDR-A003473 enabled\n");
#endif
85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN This config option is for an erratum workaround; rename it to be more clear. Also, drop it from config files don't need it and were undefining it. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-12-17 23:17:58 +00:00
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
puts("Work-around for DDR MSYNC_IN Erratum enabled\n");
fsl_esdhc: Add the workaround for erratum ESDHC111 (enable on P4080) Do not issue a manual asynchronous CMD12. Instead, use a (software) synchronous CMD12 or AUTOCMD12 to abort data transfer. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-07 05:42:19 +00:00
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
puts("Work-around for Erratum ESDHC111 enabled\n");
fsl_esdhc: Add the workaround for erratum ESDHC135 (enable on P4080) The default value of the SRS, VS18 and VS30 and ADMAS fields in the host controller capabilities register (HOSTCAPBLT) are incorrect. The default of these bits should be zero instead of one. Clear these bits out when we read HOSTCAPBLT. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-07 06:06:47 +00:00
#endif
powerpc/mpc85xx: software workaround for DDR erratum A-004468 Boot space translation utilizes the pre-translation address to select the DDR controller target. However, the post-translation address will be presented to the selected DDR controller. It is possible that the pre- translation address selects one DDR controller but the post-translation address exists in a different DDR controller when using certain DDR controller interleaving modes. The device may fail to boot under these circumstances. Note that a DDR MSE error will not be detected since DDR controller bounds registers are programmed to be the same when configured for DDR controller interleaving. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:25 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
puts("Work-around for Erratum A004468 enabled\n");
#endif
fsl_esdhc: Add the workaround for erratum ESDHC135 (enable on P4080) The default value of the SRS, VS18 and VS30 and ADMAS fields in the host controller capabilities register (HOSTCAPBLT) are incorrect. The default of these bits should be zero instead of one. Clear these bits out when we read HOSTCAPBLT. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-07 06:06:47 +00:00
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
puts("Work-around for Erratum ESDHC135 enabled\n");
fsl_esdhc: Add the workaround for erratum ESDHC136 (enable on P4080) False multi-bit ECC errors will be reported by the eSDHC buffer which can trigger a reset request. We disable all ECC error checking on SDHC. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-07 06:24:27 +00:00
#endif
P4080/esdhc: make the P4080 ESDHC13 errata workaround conditional P4080 Rev3.0 fixes ESDHC13 errata, so update the code to make the workaround conditional. In formal release document, the errata number should be ESDHC13 instead of ESDHC136. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-09-18 09:50:08 +00:00
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13)
if (SVR_MAJ(svr) < 3)
puts("Work-around for Erratum ESDHC13 enabled\n");
powerpc/p4080: Add workaround for erratum CPU22 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-06 03:35:27 +00:00
#endif
fsl_esdhc: Add the workaround for erratum ESDHC-A001 (enable on P2020) Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 4, 8, and 12. Program one more than the desired value: 4 -> 5, 8 -> 9, 12 -> 13. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-29 21:36:10 +00:00
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001)
puts("Work-around for Erratum ESDHC-A001 enabled\n");
#endif
powerpc/85xx: Add the workaround for erratum CPC-A002 (enable on P4080) CoreNet Platform Cache single-bit tag error scrubbing will cause tag corruption. Disable the feature to workaround the issue. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-13 07:54:01 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
puts("Work-around for Erratum CPC-A002 enabled\n");
#endif
powerpc/85xx: Add the workaround for erratum CPC-A003 (enable on P4080) CoreNet Platform Cache single-bit data error scrubbing will cause data corruption. Disable the feature to workaround the issue. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-13 07:56:18 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
puts("Work-around for Erratum CPC-A003 enabled\n");
#endif
powerpc/85xx: Add the workaround for erratum ELBC-A001 (enable on P4080) Simultaneous FCM and GPCM or UPM operation may erroneously trigger bus monitor timeout. Set timeout to maximum to avoid. Based on a patch from Lan Chunhe <b25806@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-13 08:58:23 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001
puts("Work-around for Erratum ELBC-A001 enabled\n");
#endif
mpc85xx: Implement workaround for erratum DDR-A003 Erratum DDR-A003 requires workaround to correctly set RCW10 for registered DIMM. Also adding polling after enabling DDR controller to ensure completion. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-10 12:03:01 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
puts("Work-around for Erratum DDR-A003 enabled\n");
#endif
powerpc/85xx: Rename MPC8572 DDR erratum to DDR115 Use unique erratum number instead of platform number. Enable command that reports errata on MPC8572DS. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-26 05:51:27 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
puts("Work-around for Erratum DDR115 enabled\n");
powerpc/mpc85xx: implement workaround for errata DDR111 and DDR134 Workaround for the following errata: DDR111 - MCKE signal may not function correctly at assertion of HRESET DDR134 - The automatic CAS-to-Preamble feature of the DDR controller can calibrate to incorrect values These two workarounds must be implemented together because they touch common registers. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-26 06:05:49 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
puts("Work-around for Erratum DDR111 enabled\n");
puts("Work-around for Erratum DDR134 enabled\n");
fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010) Issue: The NOR-FCM does not support access to unaligned addresses for 16 bit port size Impact: When 16 bit port size is used, accesses not aligned to 16 bit address boundary will result in incorrect data Workaround: The workaround is to switch to GPCM mode for NOR Flash access. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-30 08:00:28 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A002769
puts("Work-around for Erratum IFC-A002769 enabled\n");
powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC) Issue: Peripheral connected to IFC_CS3 may hamper booting from IFC. Impact: Boot from IFC may not be successful if IFC_CS3 is used. Workaround: If IFC_CS3 is used, gate IFC_CS3 while booting from NAND or NOR. Also Software should select IFC_CS3 using PMUXCR[26:27] = 0x01. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-29 11:02:52 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
puts("Work-around for Erratum P1010-A003549 enabled\n");
fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010) Issue: Address masking doesn't work properly. When sum of the base address, defined by BA, and memory bank size, defined by AM, exceeds 4GB (0xffff_ffff) then AMASKn[AM] doesn't mask CSPRn[BA] bits. Impact: This will impact booting when we are reprogramming CSPR0(BA) and AMASK0(AMASK) while executing from NOR Flash. Workaround: Re-programming of CSPR(BA) and AMASK is done while not executing from NOR Flash. The code which programs the BA and AMASK is executed from L2-SRAM. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-07 15:06:47 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
puts("Work-around for Erratum IFC A-003399 enabled\n");
powerpc/mpc8548: Add workaround for erratum NMG_DDR120 Erratum NMG_DDR120 (DDR19 in MPC8548 errata document) applies to some early version silicons. The default settings of the DDR IO receiver biasing may not work at cold temperature. When a failure occurs, a DDR input latches an incorrect value. The workaround will set the receiver to an acceptable bias point. Signed-off-by: Gong Chen Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-16 14:54:30 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
puts("Work-around for Erratum NMG DDR120 enabled\n");
powerpc/mpc8548: Add workaround for erratum NMG_LBC103 The erratum NMG_LBC103 is LBIU3 in MPC8548 errata document. Any local bus transaction may fail during LBIU resynchronization process when the clock divider [CLKDIV] is changing. Ensure there is no transaction on the local bus for at least 100 microseconds after changing clock divider LCRR[CLKDIV]. Refer to the erratum LBIU3 of mpc8548. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-03 13:37:57 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
puts("Work-around for Erratum NMG_LBC103 enabled\n");
powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129 Erratum NMG_eTSEC129 (eTSEC86 in MPC8548 document) applies to some early verion silicons. This workaround detects if the eTSEC Rx logic is properly initialized, and reinitialize the eTSEC Rx logic. Signed-off-by: Gong Chen <g.chen@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-03 13:38:50 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
puts("Work-around for Erratum NMG ETSEC129 enabled\n");
powerpc/fsl-corenet: work around erratum A004510 Erratum A004510 says that under certain load conditions, modified cache lines can be discarded, causing data corruption. To work around this, several CCSR and DCSR register updates need to be made in a careful manner, so that there is no other transaction in corenet when the update is made. The update is made from a locked cacheline, with a delay before to flush any previous activity, and a delay after to flush the CCSR/DCSR update. We can't use a readback because that would be another corenet transaction, which is not allowed. We lock the subsequent cacheline to prevent it from being fetched while we're executing the previous cacheline. It is filled with nops so that a branch doesn't cause us to fetch another cacheline. Ordinarily we are running in a cache-inhibited mapping at this point, so we temporarily change that. We make it guarded so that we should never see a speculative load, and we never do an explicit load. Thus, only the I-cache should ever fill from this mapping, and we flush/unlock it afterward. Thus we should avoid problems from any potential cache aliasing between inhibited and non-inhibited mappings. NOTE that if PAMU is used with this patch, it will need to use a dedicated LAW as described in the erratum. This is the responsibility of the OS that sets up PAMU. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-14 10:14:53 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
puts("Work-around for Erratum A004510 enabled\n");
powerpc/srio: Workaround for srio erratrm a004034 Erratum: A-004034 Affects: SRIO Description: During port initialization, the SRIO port performs lane synchronization (detecting valid symbols on a lane) and lane alignment (coordinating multiple lanes to receive valid data across lanes). Internal errors in lane synchronization and lane alignment may cause failure to achieve link initialization at the configured port width. An SRIO port configured as a 4x port may see one of these scenarios: 1. One or more lanes fails to achieve lane synchronization. Depending on which lanes fail, this may result in downtraining from 4x to 1x on lane 0, 4x to 1x on lane R (redundant lane). 2. The link may fail to achieve lane alignment as a 4x, even though all 4 lanes achieve lane synchronization, and downtrain to a 1x. An SRIO port configured as a 1x port may fail to complete port initialization (PnESCSR[PU] never deasserts) because of scenario 1. Impact: SRIO port may downtrain to 1x, or may fail to complete link initialization. Once a port completes link initialization successfully, it will operate normally. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-09-28 21:26:19 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
puts("Work-around for Erratum SRIO-A004034 enabled\n");
powerpc/mpc85xx: Add workaround for DDR erratum A004934 After DDR controller is enabled, it performs a calibration for the transmit data vs DQS paths. During this calibration, the DDR controller may make an inaccurate calculation, resulting in a non-optimal tap point. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:26 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
puts("Work-around for Erratum A004934 enabled\n");
powerpc/85xx: implement check for erratum A-004849 work-around The work-around for erratum A-004849 ("CoreNet fabric (CCF) can exhibit a deadlock under certain traffic patterns causing the system to hang") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself. It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004849, we can do this by verifying that the values in the specific registers that the work-around says to update. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-25 12:40:00 +00:00
#endif
powerpc/t4240: Adding workaround errata A-005871 When CoreNet Fabric (CCF) internal resources are consumed by the cores, inbound SRIO messaging traffic through RMan can put the device into a deadlock condition. This errata workaround forces internal resources to be reserved for upstream transactions. This ensures resources exist on the device for upstream transactions and removes the deadlock condition. The Workaround is for the T4240 silicon rev 1.0. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-23 19:56:23 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
if (IS_SVR_REV(svr, 1, 0))
puts("Work-around for Erratum A005871 enabled\n");
#endif
powerpc/85xx: implement check for erratum A-004849 work-around The work-around for erratum A-004849 ("CoreNet fabric (CCF) can exhibit a deadlock under certain traffic patterns causing the system to hang") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself. It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004849, we can do this by verifying that the values in the specific registers that the work-around says to update. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-25 12:40:00 +00:00
#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
/* This work-around is implemented in PBI, so just check for it */
check_erratum_a4849(svr);
powerpc/85xx: implement check for erratum A-004580 work-around The work-around for erratum A-004580 ("Internal tracking loop can falsely lock causing unrecoverable bit errors") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself. It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004580, we can do this by verifying that the values in the specific registers that the work-around says to update. This change requires access to the SerDes lane sub-structure in serdes_corenet_t, so we make it a named struct. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-01 08:20:23 +00:00
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
/* This work-around is implemented in PBI, so just check for it */
check_erratum_a4580(svr);
powerpc/p4080ds: fix PCI-e x8 link training down failure Due to SerDes configuration error, if we set the PCI-e controller link width as x8 in RCW and add a narrower width(such as x4, x2 or x1) PCI-e device to PCI-e slot, it fails to train down to the PCI-e device's link width. According to p4080ds errata PCIe-A003, we reset the PCI-e controller link width to x4 in u-boot. Then it can train down to x2 or x1 width to make the PCI-e link between RC and EP. Signed-off-by: Yuanquan Chen <B41889@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-26 23:49:45 +00:00
#endif
#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
puts("Work-around for Erratum PCIe-A003 enabled\n");
powerpc/85xx: Rename MPC8572 DDR erratum to DDR115 Use unique erratum number instead of platform number. Enable command that reports errata on MPC8572DS. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-26 05:51:27 +00:00
#endif
powerpc/85xx: Add command to report errata workarounds Add 'errata' command to report what errata we workaround. Report workaround for erratum SATA-A001 on P1022/P1013. Also sorted the CONFIG_CMD_* list. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-10 03:59:41 +00:00
return 0;
}
U_BOOT_CMD(
errata, 1, 0, do_errata,
"Report errata workarounds",
""
);
Reference in a new issue Copy permalink