Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 10:18:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/pinctrl/Makefile

30 lines
1 KiB
Makefile
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
# SPDX-License-Identifier: GPL-2.0+
Various Makefiles: Add SPDX-License-Identifier tags After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 01:06:16 +00:00
pinctrl: add pin control uclass support This creates a new framework for handling of pin control devices, i.e. devices that control different aspects of package pins. This uclass handles pinmuxing and pin configuration; pinmuxing controls switching among silicon blocks that share certain physical pins, pin configuration handles electronic properties such as pin- biasing, load capacitance etc. This framework can support the same device tree bindings, but if you do not need full interface support, you can disable some features to reduce memory foot print. Typically around 1.5KB is necessary to include full-featured uclass support on ARM board (CONFIG_PINCTRL + CONFIG_PINCTRL_FULL + CONFIG_PINCTRL_GENERIC + CONFIG_PINCTRL_PINMUX), for example. We are often limited on code size for SPL. Besides, we still have many boards that do not support device tree configuration. The full pinctrl, which requires OF_CONTROL, does not make sense for those boards. So, this framework also has a Do-It-Yourself (let's say simple pinctrl) interface. With CONFIG_PINCTRL_FULL disabled, the uclass itself provides no systematic mechanism for identifying the peripheral device, applying pinctrl settings, etc. They must be done in each low-level driver. In return, you can save much memory footprint and it might be useful especially for SPL. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-27 03:44:29 +00:00
obj-y += pinctrl-uclass.o
obj-$(CONFIG_$(SPL_)PINCTRL_GENERIC) += pinctrl-generic.o
pinctrl: sandbox: add sandbox pinctrl driver This driver actually does nothing but test pinctrl uclass, and demonstrate how things work. To try this driver, uncomment /* #define DEBUG */ in the drivers/pinctrl/pinctrl-sandbox.c, and debug messages will be displayed. DRAM: 128 MiB sandbox pinmux: group = 1 (serial_a), function = 1 (serial) Using default environment In: cros-ec-keyb Out: lcd Err: lcd Net: Net Initialization Skipped eth0: eth@10002000, eth1: eth@80000000, eth5: eth@90000000 => i2c dev 0 Setting bus to 0 sandbox pinmux: group = 0 (i2c), function = 0 (i2c) sandbox pinconf: group = 0 (i2c), param = 3, arg = 1 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-27 03:44:30 +00:00
pinctrl: at91: add pinctrl driver AT91 PIO controller is a combined gpio-controller, pin-mux and pin-config module. The peripheral's pins are assigned through per-pin based muxing logic. Each SoC will have to describe the its limitation and pin configuration via device tree. This will allow to do not need to touch the C code when adding new SoC if the IP version is supported. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-23 04:44:37 +00:00
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
pinctrl: at91-pio4: Add pinctrl driver AT91 PIO4 controller is a combined gpio-controller, pin-mux and pin-config module. The peripheral's pins are assigned through per-pin based muxing logic. The pin configuration is performed on specific registers which are shared along with the gpio controller. So regard the pinctrl device as a child of atmel_pio4 device. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-07-20 09:16:27 +00:00
obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
pinctrl: imx: Introduce pinctrl driver for i.MX6 Introduce pinctrl for i.MX6 1. pinctrl-imx.c is for common usage. It's used by i.MX6/7. 2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry. 3. To the pinctrl_ops implementation, only set_state is implemented. To i.MX6/7, the pinctrl dts entry is as following: &iomuxc { pinctrl-names = "default"; pinctrl_csi1: csi1grp { fsl,pins = < MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 >; }; [.....] }; there is no property named function or groups. So pinctrl_generic_set_state can not be used here. 5. This driver is a simple implementation for i.mx iomux controller, only parse the fsl,pins property and write value to registers. 6. With DEBUG enabled, we can see log when "i2c bus 0": " set_state_simple op missing imx_pinctrl_set_state: i2c1grp mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f write mux: offset 0x14c val 0x10 select_input: offset 0x5d8 val 0x1 write config: offset 0x3bc val 0x7f mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f write mux: offset 0x148 val 0x10 select_input: offset 0x5d4 val 0x1 write config: offset 0x3b8 val 0x7f " this means imx6 pinctrl driver works as expected. Signed-off-by: Peng Fan <van.freenix@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
obj-y += nxp/
pinctrl: rockchip: Add common rockchip pinctrl driver Use this driver to fit all Rockchip SOCs and to support the desired pinctrl configuration via DTS. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02 13:00:55 +00:00
obj-$(CONFIG_$(SPL_)PINCTRL_ROCKCHIP) += rockchip/
aspeed: AST2500 Pinctrl Driver This driver uses Generic Pinctrl framework and is compatible with the Linux driver for ast2500: it uses the same device tree configuration. Not all pins are supported by the driver at the moment, so it actually compatible with ast2400. In general, however, there are differences that in the future would be easier to maintain separately. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-17 19:00:27 +00:00
obj-$(CONFIG_ARCH_ASPEED) += aspeed/
drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros ar933x. This is a simple pinctrl driver, it just support uart and spi pin-mux now. Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Simon Glass <sjg@chromium.org> [fixed typo in commit subject line] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-03-16 08:59:55 +00:00
obj-$(CONFIG_ARCH_ATH79) += ath79/
x86: Add a generic Intel pinctrl driver Recent Intel SoCs share a pinctrl mechanism with many common elements. Add an implementation of this core functionality, allowing SoC-specific drivers to avoid adding common code. As well as a pinctrl driver this provides a GPIO driver based on the same code. Once other SoCs use this driver we may consider moving more properties to the device tree (e.g. the community info and pad definitions). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-07 04:42:53 +00:00
obj-$(CONFIG_PINCTRL_INTEL) += intel/
pinctrl: add support for MediaTek MT7628 This patch adds pinctrl support for mt7628, with a file for common pinmux functions and a file for mt7628 which has additional support for pinconf. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-09-25 09:45:26 +00:00
obj-$(CONFIG_ARCH_MTMIPS) += mtmips/
pinctrl: rmobile: Add Renesas RCar pincontrol driver Add PFC pincontrol driver for the Renesas RCar Gen3 R8A7795 and R8A7796 SoCs. This driver uses the PFC pin tables from Linux, thus letting us share the occassional fixes to those tables. This driver also has a DT support, so the pinmux is configured from DT instead of the ad-hoc setup in board file. This driver is meant to replace the pinmux part of SH_GPIO_PFC driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-15 19:13:55 +00:00
obj-$(CONFIG_ARCH_RMOBILE) += renesas/
pinctrl: sandbox: add sandbox pinctrl driver This driver actually does nothing but test pinctrl uclass, and demonstrate how things work. To try this driver, uncomment /* #define DEBUG */ in the drivers/pinctrl/pinctrl-sandbox.c, and debug messages will be displayed. DRAM: 128 MiB sandbox pinmux: group = 1 (serial_a), function = 1 (serial) Using default environment In: cros-ec-keyb Out: lcd Err: lcd Net: Net Initialization Skipped eth0: eth@10002000, eth1: eth@80000000, eth5: eth@90000000 => i2c dev 0 Setting bus to 0 sandbox pinmux: group = 0 (i2c), function = 0 (i2c) sandbox pinconf: group = 0 (i2c), param = 3, arg = 1 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-27 03:44:30 +00:00
obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o
pinctrl: uniphier: add UniPhier pinctrl core support The core support for the pinctrl drivers for all the UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-09-11 11:17:32 +00:00
pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER CONFIG_PINCTRL_UNIPHIER is more suitable than CONFIG_ARCH_UNIPHIER to guard the drivers/pinctrl/uniphier directory. The current CONFIG_PINCTRL_UNIPHIER_CORE is a bit long, so rename it into CONFIG_PINCTRL_UNIPHIER. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-04 06:56:31 +00:00
obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/
pinctrl: Kconfig: sort pinctrl config options to prevent future clutter This originally started out as "pinctrl: Kconfig: reorder to keep Rockchip options together" and tried to keep the Rockchip-related config options together. However, we now rewrite all chip-specific driver selections to start with CONFIG_PINCTRL_ (with the inadvertent changes to related Makefiles) and sort those alphabetically. And as this already means touching most of the file, we also reformat the help text to not exceed 80 characters (but make full use of those 80 characters). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-04-19 14:46:37 +00:00
obj-$(CONFIG_PINCTRL_PIC32) += pinctrl_pic32.o
pinctrl: Add pinctrl driver support for Exynos7420 SoC Add pinctrl driver support for Samsung's Exynos7420 SoC. The changes have been split into Exynos7420 specific and common Exynos specific portions so that this implementation is reusable on other Exynos SoCs as well. The Exynos pinctrl driver supports only device tree based pin configuration. The bindings used are similar to the ones used in the linux kernel. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-04-23 16:48:08 +00:00
obj-$(CONFIG_PINCTRL_EXYNOS) += exynos/
pinctrl: add driver for meson-gxbb pin controller Add a pin controller driver for Meson GXBB adapted from Linux kernel. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-16 09:49:49 +00:00
obj-$(CONFIG_PINCTRL_MESON) += meson/
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
obj-$(CONFIG_PINCTRL_MTK) += mediatek/
pinctrl: mscc: Add gpio and pinctrl driver for MSCC MIPS SoCs (VcoreIII based) This driver supports the pin and gpio controller found in the Ocelot and Luton SoCs. The driver was inspired from the pinctrl driver in Linux, but was simplified and was modified to allow supporting an other SoCs (Luton). For Ocelot and Luton the controller is the same, only the pins to program differ. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> [changed to only descend into mscc/ dependent on CONFIG_PINCTRL_MSCC] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-08 08:59:01 +00:00
obj-$(CONFIG_PINCTRL_MSCC) += mscc/
pinctrl: mvebu: Enable support for the Armada 37xx pinctrl driver To enable support for the Armada 37xx pinctrl driver, we need to change the Kconfig symbol for the Armada 7k/8k pinctrl driver and its dependencies to distinguish between both platforms and drivers. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com>
2017-05-09 11:35:44 +00:00
obj-$(CONFIG_ARCH_MVEBU) += mvebu/
pinctrl: add nexell driver Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - livetree API (dev_read_...) is used instead of fdt one (fdt...). - doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt added. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-10 17:07:30 +00:00
obj-$(CONFIG_ARCH_NEXELL) += nexell/
Add single register pin controller driver This patch adds a pin controller driver supporting devices using a single configuration register per pin. Signed-off-by: Felix Brack <fb@ltec.ch>
2017-03-22 10:26:44 +00:00
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
STiH410: Add STi pinctrl driver Add STMicroelectronics STiH410 pinctrl driver Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:10 +00:00
obj-$(CONFIG_PINCTRL_STI) += pinctrl-sti.o
PINCTRL: stm32f7: add pin control driver This driver uses the same pin control binding as that of linux, binding document of this patch is copied from linux. One addition done is for GPIO input and output mode configuration which was missing. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-12 18:25:49 +00:00
obj-$(CONFIG_PINCTRL_STM32) += pinctrl_stm32.o
pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver This patch adds pinctrl/GPIO driver for STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander. STMFX is an I2C slave controller, offering up to 24 GPIOs. The driver relies on UCLASS_PINCTRL and UCLASS_GPIO. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-03-11 10:13:15 +00:00
obj-$(CONFIG_$(SPL_)PINCTRL_STMFX) += pinctrl-stmfx.o
bcm283x: Add pinctrl driver The bcm283x family of SoCs have a GPIO controller that also acts as pinctrl controller. This patch introduces a new pinctrl driver that can actually properly mux devices into their device tree defined pin states and is now the primary owner of the gpio device. The previous GPIO driver gets moved into a subdevice of the pinctrl driver, bound to the same OF node. That way whenever a device asks for pinctrl support, it gets it automatically from the pinctrl driver and GPIO support is still available in the normal command line phase. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-23 17:05:21 +00:00
obj-y += broadcom/
Reference in a new issue Copy permalink