Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-09-23 08:01:59 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/verdin-imx8mp_defconfig

148 lines
3.6 KiB
Text
Raw Normal View History

board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
CONFIG_SYS_TEXT_BASE=0x40200000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
verdin-imx8mp: synchronise device tree with linux Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Verdin Development (carrier) board (e.g. imx8mp-verdin-wifi-dev.dtb rather than the previous imx8mp-verdin.dtb). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-21 13:46:44 +00:00
CONFIG_DEFAULT_DEVICE_TREE="imx8mp-verdin-wifi-dev"
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_SPL_TEXT_BASE=0x920000
CONFIG_TARGET_VERDIN_IMX8MP=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23 19:24:14 +00:00
CONFIG_SYS_PROMPT="Verdin iMX8MP # "
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_IMX_BOOTAUX=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
verdin-imx8mm: verdin-imx8mp: update env memory layout Update the distro config env memory layout for the Verdin iMX8M Mini and Verdin iMX8M Plus: - loadaddr=0x48280000 allows for 128.5MB area for uncompressing (ie FIT images, kernel_comp_addr_r, kernel_comp_size) - fdt_addr_r = loadaddr + 127.5MB : allows for 127.5MB kernel - scriptaddr = fdt_addr_r + 512KB : allows for 512KB fdt - ramdisk_addr_r = scriptaddr + 512KB : allows for 512KB script Memory layout taken from commit fd5c7173ade4 ("imx8m{m,n}_venice: update env memory layout") but moved loadaddr by an additional 0.5MB to avoid "Moving Image from 0x48200000 to 0x48280000" during booti plus actually defining kernel_comp_size to make booti work. Note that for our regular BSP Layers and Reference Images for Yocto Project an updated distro boot script is required (see meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-08-22 13:06:00 +00:00
CONFIG_SYS_LOAD_ADDR=0x48280000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 14:33:18 +00:00
CONFIG_SYS_MEMTEST_START=0x40000000
CONFIG_SYS_MEMTEST_END=0x80000000
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_DISTRO_DEFAULTS=y
configs: Re-run migrations As the CI test for stopping platforms from being merged that were defining symbols that had Kconfig entries, a small number of symbols needed to be migrated again. Do so, and catch two cases the README should also have been updated but was not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 12:12:48 +00:00
CONFIG_REMAKE_ELF=y
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
configs: tdx: Do not overwrite fdtfile if it got set manually In case a customer wants to set fdtfile currently preboot overrides it always with preboot just before the bootdelay. Use test -n to check if fdtfile is already set and only set it if nothing got touched manually Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-13 09:33:31 +00:00
CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx8mp-verdin-${variant}-${fdt_board}.dtb"
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
Convert CONFIG_SPL_PAD_TO et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-16 21:20:26 +00:00
CONFIG_SPL_MAX_SIZE=0x26000
Convert CONFIG_SPL_BSS_START_ADDR to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27 14:19:45 +00:00
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x98fc00
Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-19 19:09:22 +00:00
CONFIG_SPL_BSS_MAX_SIZE=0x400
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
Convert CONFIG_SPL_STACK to Kconfig This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-26 17:13:21 +00:00
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x960000
Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27 16:48:32 +00:00
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=64
Convert CONFIG_SYS_CBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 22:01:06 +00:00
CONFIG_SYS_CBSIZE=2048
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=2081
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
# CONFIG_BOOTM_NETBSD is not set
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_READ=y
CONFIG_CMD_USB=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_UUID=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=2
CONFIG_SYS_MMC_ENV_PART=1
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:07 +00:00
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth0"
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_VERSION_VARIABLE=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_BLOCKSIZE=4096
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_ENV=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_CLK_IMX8MP=y
CONFIG_GPIO_HOG=y
CONFIG_MXC_GPIO=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
# CONFIG_SPL_DM_I2C is not set
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH_PHY=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_IMX=y
CONFIG_FEC_MXC=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
CONFIG_SPL_POWER_LEGACY=y
CONFIG_POWER_DOMAIN=y
CONFIG_IMX8M_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPL_POWER_I2C=y
configs: verdin-imx8mm: verdin-imx8mp: enable dm serial Enable driver model for serial. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-08 08:06:57 +00:00
CONFIG_DM_SERIAL=y
board: toradex: add verdin imx8m plus support This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 10:54:13 +00:00
CONFIG_MXC_UART=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_IMX_WATCHDOG=y
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in a new issue Copy permalink