2006-06-30 14:30:46 +00:00
|
|
|
/*
|
|
|
|
|
* (C) Copyright 2006
|
|
|
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
|
*
|
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
|
* project.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
|
*
|
|
|
|
|
* Port to AMCC-440SPE Evaluation Board SOP - April 2005
|
2006-08-10 10:43:17 +00:00
|
|
|
*
|
|
|
|
|
* PCIe supporting routines derived from Linux 440SPe PCIe driver.
|
2006-06-30 14:30:46 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
|
#include <ppc4xx.h>
|
|
|
|
|
#include <i2c.h>
|
2008-09-01 03:37:00 +00:00
|
|
|
#include <netdev.h>
|
2007-10-03 05:34:10 +00:00
|
|
|
#include <asm/processor.h>
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
#include <asm/4xx_pcie.h>
|
2006-08-10 10:43:17 +00:00
|
|
|
|
2006-06-30 14:30:46 +00:00
|
|
|
#include "yucca.h"
|
2006-08-29 06:05:15 +00:00
|
|
|
|
2007-09-15 18:48:41 +00:00
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
2006-06-30 14:30:46 +00:00
|
|
|
void fpga_init (void);
|
|
|
|
|
|
|
|
|
|
#define DEBUG_ENV
|
|
|
|
|
#ifdef DEBUG_ENV
|
|
|
|
|
#define DEBUGF(fmt,args...) printf(fmt ,##args)
|
|
|
|
|
#else
|
|
|
|
|
#define DEBUGF(fmt,args...)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define FALSE 0
|
|
|
|
|
#define TRUE 1
|
|
|
|
|
|
|
|
|
|
int board_early_init_f (void)
|
|
|
|
|
{
|
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
|
|
|
| Define Boot devices
|
|
|
|
|
+----------------------------------------------------------------------------*/
|
|
|
|
|
#define BOOT_FROM_SMALL_FLASH 0x00
|
|
|
|
|
#define BOOT_FROM_LARGE_FLASH_OR_SRAM 0x01
|
|
|
|
|
#define BOOT_FROM_PCI 0x02
|
|
|
|
|
#define BOOT_DEVICE_UNKNOWN 0x03
|
|
|
|
|
|
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
|
|
|
| EBC Devices Characteristics
|
|
|
|
|
| Peripheral Bank Access Parameters - EBC_BxAP
|
|
|
|
|
| Peripheral Bank Configuration Register - EBC_BxCR
|
|
|
|
|
+----------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Small Flash and FRAM
|
|
|
|
|
* BU Value
|
|
|
|
|
* BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
|
|
|
|
|
* B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000
|
|
|
|
|
* B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000
|
|
|
|
|
*/
|
|
|
|
|
#define EBC_BXAP_SMALL_FLASH EBC_BXAP_BME_DISABLED | \
|
|
|
|
|
EBC_BXAP_TWT_ENCODE(7) | \
|
|
|
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
|
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
|
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_OEN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_WBN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_WBF_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_TH_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_RE_DISABLED | \
|
|
|
|
|
EBC_BXAP_SOR_DELAYED | \
|
|
|
|
|
EBC_BXAP_BEM_WRITEONLY | \
|
|
|
|
|
EBC_BXAP_PEN_DISABLED
|
|
|
|
|
|
|
|
|
|
#define EBC_BXCR_SMALL_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \
|
|
|
|
|
EBC_BXCR_BS_16MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_8BIT
|
|
|
|
|
|
|
|
|
|
#define EBC_BXCR_SMALL_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xe7000000) | \
|
|
|
|
|
EBC_BXCR_BS_16MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_8BIT
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Large Flash and SRAM
|
|
|
|
|
* BU Value
|
|
|
|
|
* BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
|
|
|
|
|
* B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000
|
|
|
|
|
* B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000
|
|
|
|
|
*/
|
|
|
|
|
#define EBC_BXAP_LARGE_FLASH EBC_BXAP_BME_DISABLED | \
|
|
|
|
|
EBC_BXAP_TWT_ENCODE(7) | \
|
|
|
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
|
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
|
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_OEN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_WBN_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_WBF_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_TH_ENCODE(0) | \
|
|
|
|
|
EBC_BXAP_RE_DISABLED | \
|
|
|
|
|
EBC_BXAP_SOR_DELAYED | \
|
|
|
|
|
EBC_BXAP_BEM_WRITEONLY | \
|
|
|
|
|
EBC_BXAP_PEN_DISABLED
|
|
|
|
|
|
|
|
|
|
#define EBC_BXCR_LARGE_FLASH_CS0 EBC_BXCR_BAS_ENCODE(0xFF000000) | \
|
|
|
|
|
EBC_BXCR_BS_16MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_16BIT
|
|
|
|
|
|
|
|
|
|
#define EBC_BXCR_LARGE_FLASH_CS2 EBC_BXCR_BAS_ENCODE(0xE7000000) | \
|
|
|
|
|
EBC_BXCR_BS_16MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_16BIT
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* FPGA
|
|
|
|
|
* BU value :
|
|
|
|
|
* B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
|
|
|
|
|
* B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000
|
|
|
|
|
*/
|
|
|
|
|
#define EBC_BXAP_FPGA EBC_BXAP_BME_DISABLED | \
|
|
|
|
|
EBC_BXAP_TWT_ENCODE(11) | \
|
|
|
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
|
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
|
|
|
EBC_BXAP_CSN_ENCODE(10) | \
|
|
|
|
|
EBC_BXAP_OEN_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_WBN_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_WBF_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_TH_ENCODE(1) | \
|
|
|
|
|
EBC_BXAP_RE_DISABLED | \
|
|
|
|
|
EBC_BXAP_SOR_DELAYED | \
|
|
|
|
|
EBC_BXAP_BEM_RW | \
|
|
|
|
|
EBC_BXAP_PEN_DISABLED
|
|
|
|
|
|
|
|
|
|
#define EBC_BXCR_FPGA_CS1 EBC_BXCR_BAS_ENCODE(0xe2000000) | \
|
|
|
|
|
EBC_BXCR_BS_1MB | \
|
|
|
|
|
EBC_BXCR_BU_RW | \
|
|
|
|
|
EBC_BXCR_BW_16BIT
|
|
|
|
|
|
|
|
|
|
unsigned long mfr;
|
|
|
|
|
/*
|
|
|
|
|
* Define Variables for EBC initialization depending on BOOTSTRAP option
|
|
|
|
|
*/
|
|
|
|
|
unsigned long sdr0_pinstp, sdr0_sdstp1 ;
|
|
|
|
|
unsigned long bootstrap_settings, ebc_data_width, boot_selection;
|
|
|
|
|
int computed_boot_device = BOOT_DEVICE_UNKNOWN;
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------+
|
|
|
|
|
| Initialize EBC CONFIG -
|
|
|
|
|
| Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
|
|
|
|
|
| default value :
|
|
|
|
|
| 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
|
|
|
|
|
|
|
|
|
|
|
+-------------------------------------------------------------------*/
|
|
|
|
|
mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
|
|
|
|
|
EBC_CFG_PTD_ENABLE |
|
|
|
|
|
EBC_CFG_RTC_16PERCLK |
|
|
|
|
|
EBC_CFG_ATC_PREVIOUS |
|
|
|
|
|
EBC_CFG_DTC_PREVIOUS |
|
|
|
|
|
EBC_CFG_CTC_PREVIOUS |
|
|
|
|
|
EBC_CFG_OEO_PREVIOUS |
|
|
|
|
|
EBC_CFG_EMC_DEFAULT |
|
|
|
|
|
EBC_CFG_PME_DISABLE |
|
|
|
|
|
EBC_CFG_PR_16);
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
| PART 1 : Initialize EBC Bank 1
|
|
|
|
|
| ==============================
|
|
|
|
|
| Bank1 is always associated to the EPLD.
|
|
|
|
|
| It has to be initialized prior to other banks settings computation
|
|
|
|
|
| since some board registers values may be needed to determine the
|
|
|
|
|
| boot type
|
|
|
|
|
|
|
|
|
|
|
+-------------------------------------------------------------------*/
|
|
|
|
|
mtebc(pb1ap, EBC_BXAP_FPGA);
|
|
|
|
|
mtebc(pb1cr, EBC_BXCR_FPGA_CS1);
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
| PART 2 : Determine which boot device was selected
|
|
|
|
|
| =================================================
|
|
|
|
|
|
|
|
|
|
|
| Read Pin Strap Register in PPC440SPe
|
|
|
|
|
| Result can either be :
|
|
|
|
|
| - Boot strap = boot from EBC 8bits => Small Flash
|
|
|
|
|
| - Boot strap = boot from PCI
|
|
|
|
|
| - Boot strap = IIC
|
|
|
|
|
| In case of boot from IIC, read Serial Device Strap Register1
|
|
|
|
|
|
|
|
|
|
|
| Result can either be :
|
|
|
|
|
| - Boot from EBC - EBC Bus Width = 8bits => Small Flash
|
|
|
|
|
| - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM
|
|
|
|
|
| - Boot from PCI
|
|
|
|
|
|
|
|
|
|
|
+-------------------------------------------------------------------*/
|
|
|
|
|
/* Read Pin Strap Register in PPC440SP */
|
2007-03-08 09:10:18 +00:00
|
|
|
mfsdr(SDR0_PINSTP, sdr0_pinstp);
|
2006-06-30 14:30:46 +00:00
|
|
|
bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
|
|
|
|
|
|
|
|
|
|
switch (bootstrap_settings) {
|
|
|
|
|
case SDR0_PINSTP_BOOTSTRAP_SETTINGS0:
|
|
|
|
|
/*
|
|
|
|
|
* Strapping Option A
|
|
|
|
|
* Boot from EBC - 8 bits , Small Flash
|
|
|
|
|
*/
|
|
|
|
|
computed_boot_device = BOOT_FROM_SMALL_FLASH;
|
|
|
|
|
break;
|
|
|
|
|
case SDR0_PINSTP_BOOTSTRAP_SETTINGS1:
|
|
|
|
|
/*
|
|
|
|
|
* Strappping Option B
|
|
|
|
|
* Boot from PCI
|
|
|
|
|
*/
|
|
|
|
|
computed_boot_device = BOOT_FROM_PCI;
|
|
|
|
|
break;
|
|
|
|
|
case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN:
|
|
|
|
|
case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN:
|
|
|
|
|
/*
|
|
|
|
|
* Strapping Option C or D
|
|
|
|
|
* Boot Settings in IIC EEprom address 0x50 or 0x54
|
|
|
|
|
* Read Serial Device Strap Register1 in PPC440SPe
|
|
|
|
|
*/
|
2007-03-08 09:10:18 +00:00
|
|
|
mfsdr(SDR0_SDSTP1, sdr0_sdstp1);
|
2006-06-30 14:30:46 +00:00
|
|
|
boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
|
|
|
|
|
ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
|
|
|
|
|
|
|
|
|
|
switch (boot_selection) {
|
|
|
|
|
case SDR0_SDSTP1_ERPN_EBC:
|
|
|
|
|
switch (ebc_data_width) {
|
|
|
|
|
case SDR0_SDSTP1_EBCW_16_BITS:
|
|
|
|
|
computed_boot_device =
|
|
|
|
|
BOOT_FROM_LARGE_FLASH_OR_SRAM;
|
|
|
|
|
break;
|
|
|
|
|
case SDR0_SDSTP1_EBCW_8_BITS :
|
|
|
|
|
computed_boot_device = BOOT_FROM_SMALL_FLASH;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SDR0_SDSTP1_ERPN_PCI:
|
|
|
|
|
computed_boot_device = BOOT_FROM_PCI;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
/* should not occure */
|
|
|
|
|
computed_boot_device = BOOT_DEVICE_UNKNOWN;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
/* should not be */
|
|
|
|
|
computed_boot_device = BOOT_DEVICE_UNKNOWN;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
| PART 3 : Compute EBC settings depending on selected boot device
|
|
|
|
|
| ====== ======================================================
|
|
|
|
|
|
|
|
|
|
|
| Resulting EBC init will be among following configurations :
|
|
|
|
|
|
|
|
|
|
|
| - Boot from EBC 8bits => boot from Small Flash selected
|
|
|
|
|
| EBC-CS0 = Small Flash
|
|
|
|
|
| EBC-CS2 = Large Flash and SRAM
|
|
|
|
|
|
|
|
|
|
|
| - Boot from EBC 16bits => boot from Large Flash or SRAM
|
|
|
|
|
| EBC-CS0 = Large Flash or SRAM
|
|
|
|
|
| EBC-CS2 = Small Flash
|
|
|
|
|
|
|
|
|
|
|
| - Boot from PCI
|
|
|
|
|
| EBC-CS0 = not initialized to avoid address contention
|
|
|
|
|
| EBC-CS2 = same as boot from Small Flash selected
|
|
|
|
|
|
|
|
|
|
|
+-------------------------------------------------------------------*/
|
|
|
|
|
unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
|
|
|
|
|
unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
|
|
|
|
|
|
|
|
|
|
switch (computed_boot_device) {
|
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
|
case BOOT_FROM_PCI:
|
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
|
/*
|
|
|
|
|
* By Default CS2 is affected to LARGE Flash
|
|
|
|
|
* do not initialize SMALL FLASH to avoid address contention
|
|
|
|
|
* Large Flash
|
|
|
|
|
*/
|
|
|
|
|
ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH;
|
|
|
|
|
ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
|
case BOOT_FROM_SMALL_FLASH:
|
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
|
ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH;
|
|
|
|
|
ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Large Flash or SRAM
|
|
|
|
|
*/
|
|
|
|
|
/* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */
|
|
|
|
|
ebc0_cs2_bxap_value = 0x048ff240;
|
|
|
|
|
ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
|
case BOOT_FROM_LARGE_FLASH_OR_SRAM:
|
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
|
ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH;
|
|
|
|
|
ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0;
|
|
|
|
|
|
|
|
|
|
/* Small flash */
|
|
|
|
|
ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH;
|
|
|
|
|
ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
|
default:
|
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
|
/* BOOT_DEVICE_UNKNOWN */
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
mtebc(pb0ap, ebc0_cs0_bxap_value);
|
|
|
|
|
mtebc(pb0cr, ebc0_cs0_bxcr_value);
|
|
|
|
|
mtebc(pb2ap, ebc0_cs2_bxap_value);
|
|
|
|
|
mtebc(pb2cr, ebc0_cs2_bxcr_value);
|
|
|
|
|
|
|
|
|
|
/*--------------------------------------------------------------------+
|
|
|
|
|
| Interrupt controller setup for the AMCC 440SPe Evaluation board.
|
|
|
|
|
+--------------------------------------------------------------------+
|
|
|
|
|
+---------------------------------------------------------------------+
|
|
|
|
|
|Interrupt| Source | Pol. | Sensi.| Crit. |
|
|
|
|
|
+---------+-----------------------------------+-------+-------+-------+
|
|
|
|
|
| IRQ 00 | UART0 | High | Level | Non |
|
|
|
|
|
| IRQ 01 | UART1 | High | Level | Non |
|
|
|
|
|
| IRQ 02 | IIC0 | High | Level | Non |
|
|
|
|
|
| IRQ 03 | IIC1 | High | Level | Non |
|
|
|
|
|
| IRQ 04 | PCI0X0 MSG IN | High | Level | Non |
|
|
|
|
|
| IRQ 05 | PCI0X0 CMD Write | High | Level | Non |
|
|
|
|
|
| IRQ 06 | PCI0X0 Power Mgt | High | Level | Non |
|
|
|
|
|
| IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non |
|
|
|
|
|
| IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non |
|
|
|
|
|
| IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non |
|
|
|
|
|
| IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non |
|
|
|
|
|
| IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit |
|
|
|
|
|
| IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non |
|
|
|
|
|
| IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non |
|
|
|
|
|
| IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non |
|
|
|
|
|
| IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non |
|
|
|
|
|
| IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non |
|
|
|
|
|
| IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit |
|
|
|
|
|
| IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non |
|
|
|
|
|
| IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non |
|
|
|
|
|
| IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non |
|
|
|
|
|
| IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non |
|
|
|
|
|
| IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non |
|
|
|
|
|
| IRQ 23 | I2O Inbound Doorbell | High | Level | Non |
|
|
|
|
|
| IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non |
|
|
|
|
|
| IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non |
|
|
|
|
|
| IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non |
|
|
|
|
|
| IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non |
|
|
|
|
|
| IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non |
|
|
|
|
|
| IRQ 29 | GPT Down Count Timer | Rising| Edge | Non |
|
|
|
|
|
| IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non |
|
|
|
|
|
| IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. |
|
|
|
|
|
|----------------------------------------------------------------------
|
|
|
|
|
| IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non |
|
|
|
|
|
| IRQ 33 | MAL Serr | High | Level | Non |
|
|
|
|
|
| IRQ 34 | MAL Txde | High | Level | Non |
|
|
|
|
|
| IRQ 35 | MAL Rxde | High | Level | Non |
|
|
|
|
|
| IRQ 36 | DMC CE or DMC UE | High | Level | Non |
|
|
|
|
|
| IRQ 37 | EBC or UART2 | High |Lvl Edg| Non |
|
|
|
|
|
| IRQ 38 | MAL TX EOB | High | Level | Non |
|
|
|
|
|
| IRQ 39 | MAL RX EOB | High | Level | Non |
|
|
|
|
|
| IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non |
|
|
|
|
|
| IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non |
|
|
|
|
|
| IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non |
|
|
|
|
|
| IRQ 43 | L2 Cache | Risin | Edge | Non |
|
|
|
|
|
| IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non |
|
|
|
|
|
| IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non |
|
|
|
|
|
| IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non |
|
|
|
|
|
| IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non |
|
|
|
|
|
| IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non |
|
|
|
|
|
| IRQ 54 | DMA Error | High | Level | Non |
|
|
|
|
|
| IRQ 55 | DMA I2O Error | High | Level | Non |
|
|
|
|
|
| IRQ 56 | Serial ROM | High | Level | Non |
|
|
|
|
|
| IRQ 57 | PCIX0 Error | High | Edge | Non |
|
|
|
|
|
| IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non |
|
|
|
|
|
| IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non |
|
|
|
|
|
| IRQ 60 | EMAC0 Interrupt | High | Level | Non |
|
|
|
|
|
| IRQ 61 | EMAC0 Wake-up | High | Level | Non |
|
|
|
|
|
| IRQ 62 | Reserved | High | Level | Non |
|
|
|
|
|
| IRQ 63 | XOR | High | Level | Non |
|
|
|
|
|
|----------------------------------------------------------------------
|
|
|
|
|
| IRQ 64 | PE0 AL | High | Level | Non |
|
|
|
|
|
| IRQ 65 | PE0 VPD Access | Risin | Edge | Non |
|
|
|
|
|
| IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non |
|
|
|
|
|
| IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non |
|
|
|
|
|
| IRQ 68 | PE0 TCR | High | Level | Non |
|
|
|
|
|
| IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non |
|
|
|
|
|
| IRQ 70 | PE0 DCR Error | High | Level | Non |
|
|
|
|
|
| IRQ 71 | Reserved | N/A | N/A | Non |
|
|
|
|
|
| IRQ 72 | PE1 AL | High | Level | Non |
|
|
|
|
|
| IRQ 73 | PE1 VPD Access | Risin | Edge | Non |
|
|
|
|
|
| IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non |
|
|
|
|
|
| IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non |
|
|
|
|
|
| IRQ 76 | PE1 TCR | High | Level | Non |
|
|
|
|
|
| IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non |
|
|
|
|
|
| IRQ 78 | PE1 DCR Error | High | Level | Non |
|
|
|
|
|
| IRQ 79 | Reserved | N/A | N/A | Non |
|
|
|
|
|
| IRQ 80 | PE2 AL | High | Level | Non |
|
|
|
|
|
| IRQ 81 | PE2 VPD Access | Risin | Edge | Non |
|
|
|
|
|
| IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non |
|
|
|
|
|
| IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non |
|
|
|
|
|
| IRQ 84 | PE2 TCR | High | Level | Non |
|
|
|
|
|
| IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non |
|
|
|
|
|
| IRQ 86 | PE2 DCR Error | High | Level | Non |
|
|
|
|
|
| IRQ 87 | Reserved | N/A | N/A | Non |
|
|
|
|
|
| IRQ 88 | External IRQ(5) | Progr | Progr | Non |
|
|
|
|
|
| IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non |
|
|
|
|
|
| IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non |
|
|
|
|
|
| IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non |
|
|
|
|
|
| IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non |
|
|
|
|
|
| IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non |
|
|
|
|
|
| IRQ 94 | Reserved | N/A | N/A | Non |
|
|
|
|
|
| IRQ 95 | Reserved | N/A | N/A | Non |
|
|
|
|
|
|---------------------------------------------------------------------
|
|
|
|
|
| IRQ 96 | PE0 INTA | High | Level | Non |
|
|
|
|
|
| IRQ 97 | PE0 INTB | High | Level | Non |
|
|
|
|
|
| IRQ 98 | PE0 INTC | High | Level | Non |
|
|
|
|
|
| IRQ 99 | PE0 INTD | High | Level | Non |
|
|
|
|
|
| IRQ 100 | PE1 INTA | High | Level | Non |
|
|
|
|
|
| IRQ 101 | PE1 INTB | High | Level | Non |
|
|
|
|
|
| IRQ 102 | PE1 INTC | High | Level | Non |
|
|
|
|
|
| IRQ 103 | PE1 INTD | High | Level | Non |
|
|
|
|
|
| IRQ 104 | PE2 INTA | High | Level | Non |
|
|
|
|
|
| IRQ 105 | PE2 INTB | High | Level | Non |
|
|
|
|
|
| IRQ 106 | PE2 INTC | High | Level | Non |
|
|
|
|
|
| IRQ 107 | PE2 INTD | Risin | Edge | Non |
|
|
|
|
|
| IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non |
|
|
|
|
|
| IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non |
|
|
|
|
|
+---------+-----------------------------------+-------+-------+------*/
|
|
|
|
|
/*--------------------------------------------------------------------+
|
|
|
|
|
| Put UICs in PowerPC440SPemode.
|
|
|
|
|
| Initialise UIC registers. Clear all interrupts. Disable all
|
|
|
|
|
| interrupts.
|
|
|
|
|
| Set critical interrupt values. Set interrupt polarities. Set
|
|
|
|
|
| interrupt trigger levels. Make bit 0 High priority. Clear all
|
|
|
|
|
| interrupts again.
|
|
|
|
|
+-------------------------------------------------------------------*/
|
|
|
|
|
mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */
|
|
|
|
|
mtdcr (uic3er, 0x00000000); /* disable all interrupts */
|
|
|
|
|
mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical
|
|
|
|
|
* interrupts */
|
|
|
|
|
mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities */
|
|
|
|
|
mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
|
|
|
|
|
mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest
|
|
|
|
|
* priority */
|
|
|
|
|
mtdcr (uic3sr, 0x00000000); /* clear all interrupts */
|
|
|
|
|
mtdcr (uic3sr, 0xffffffff); /* clear all interrupts */
|
|
|
|
|
|
|
|
|
|
mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
|
|
|
|
|
mtdcr (uic2er, 0x00000000); /* disable all interrupts */
|
|
|
|
|
mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical
|
|
|
|
|
* interrupts */
|
|
|
|
|
mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities */
|
|
|
|
|
mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
|
|
|
|
|
mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest
|
|
|
|
|
* priority */
|
|
|
|
|
mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
|
|
|
|
|
mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
|
|
|
|
|
|
|
|
|
|
mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
|
|
|
|
|
mtdcr (uic1er, 0x00000000); /* disable all interrupts */
|
|
|
|
|
mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical
|
|
|
|
|
* interrupts */
|
|
|
|
|
mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */
|
|
|
|
|
mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels */
|
|
|
|
|
mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest
|
|
|
|
|
* priority */
|
|
|
|
|
mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
|
|
|
|
|
mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
|
|
|
|
|
|
|
|
|
|
mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
|
|
|
|
|
mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted
|
|
|
|
|
* cascade to be checked */
|
|
|
|
|
mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical
|
|
|
|
|
* interrupts */
|
|
|
|
|
mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities */
|
|
|
|
|
mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */
|
|
|
|
|
mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest
|
|
|
|
|
* priority */
|
|
|
|
|
mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
|
|
|
|
|
mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
|
|
|
|
|
|
2007-12-06 04:58:43 +00:00
|
|
|
mfsdr(sdr_mfr, mfr);
|
|
|
|
|
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
|
|
|
|
|
mtsdr(sdr_mfr, mfr);
|
|
|
|
|
|
2006-06-30 14:30:46 +00:00
|
|
|
fpga_init();
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int checkboard (void)
|
|
|
|
|
{
|
2006-07-03 21:42:36 +00:00
|
|
|
char *s = getenv("serial#");
|
|
|
|
|
|
|
|
|
|
printf("Board: Yucca - AMCC 440SPe Evaluation Board");
|
|
|
|
|
if (s != NULL) {
|
|
|
|
|
puts(", serial# ");
|
|
|
|
|
puts(s);
|
|
|
|
|
}
|
|
|
|
|
putc('\n');
|
|
|
|
|
|
2006-06-30 14:30:46 +00:00
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2007-07-16 08:00:43 +00:00
|
|
|
/*
|
|
|
|
|
* Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
|
|
|
|
|
* board specific values.
|
|
|
|
|
*/
|
|
|
|
|
static int ppc440spe_rev_a(void)
|
|
|
|
|
{
|
|
|
|
|
if ((get_pvr() == PVR_440SPe_6_RA) || (get_pvr() == PVR_440SPe_RA))
|
|
|
|
|
return 1;
|
|
|
|
|
else
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
u32 ddr_wrdtr(u32 default_val) {
|
|
|
|
|
/*
|
|
|
|
|
* Yucca boards with 440SPe rev. A need a slightly different setup
|
|
|
|
|
* for the MCIF0_WRDTR register.
|
|
|
|
|
*/
|
|
|
|
|
if (ppc440spe_rev_a())
|
|
|
|
|
return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_270_DEG_ADV);
|
|
|
|
|
|
|
|
|
|
return default_val;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
u32 ddr_clktr(u32 default_val) {
|
|
|
|
|
/*
|
|
|
|
|
* Yucca boards with 440SPe rev. A need a slightly different setup
|
|
|
|
|
* for the MCIF0_CLKTR register.
|
|
|
|
|
*/
|
|
|
|
|
if (ppc440spe_rev_a())
|
|
|
|
|
return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
|
|
|
|
|
|
|
|
|
|
return default_val;
|
|
|
|
|
}
|
|
|
|
|
|
2006-06-30 14:30:46 +00:00
|
|
|
/*************************************************************************
|
|
|
|
|
* pci_pre_init
|
|
|
|
|
*
|
|
|
|
|
* This routine is called just prior to registering the hose and gives
|
|
|
|
|
* the board the opportunity to check things. Returning a value of zero
|
|
|
|
|
* indicates that things are bad & PCI initialization should be aborted.
|
|
|
|
|
*
|
|
|
|
|
* Different boards may wish to customize the pci controller structure
|
|
|
|
|
* (add regions, override default access routines, etc) or perform
|
|
|
|
|
* certain pre-initialization actions.
|
|
|
|
|
*
|
|
|
|
|
************************************************************************/
|
2007-06-25 13:57:39 +00:00
|
|
|
#if defined(CONFIG_PCI)
|
2006-06-30 14:30:46 +00:00
|
|
|
int pci_pre_init(struct pci_controller * hose )
|
|
|
|
|
{
|
|
|
|
|
unsigned long strap;
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------+
|
|
|
|
|
* The yucca board is always configured as the host & requires the
|
|
|
|
|
* PCI arbiter to be enabled.
|
|
|
|
|
*-------------------------------------------------------------------*/
|
|
|
|
|
mfsdr(sdr_sdstp1, strap);
|
|
|
|
|
if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
|
|
|
|
|
printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
2007-06-25 13:57:39 +00:00
|
|
|
#endif /* defined(CONFIG_PCI) */
|
2006-06-30 14:30:46 +00:00
|
|
|
|
|
|
|
|
/*************************************************************************
|
|
|
|
|
* pci_target_init
|
|
|
|
|
*
|
|
|
|
|
* The bootstrap configuration provides default settings for the pci
|
|
|
|
|
* inbound map (PIM). But the bootstrap config choices are limited and
|
|
|
|
|
* may not be sufficient for a given board.
|
|
|
|
|
*
|
|
|
|
|
************************************************************************/
|
2008-10-16 13:01:15 +00:00
|
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
|
2006-06-30 14:30:46 +00:00
|
|
|
void pci_target_init(struct pci_controller * hose )
|
|
|
|
|
{
|
|
|
|
|
/*-------------------------------------------------------------------+
|
|
|
|
|
* Disable everything
|
|
|
|
|
*-------------------------------------------------------------------*/
|
|
|
|
|
out32r( PCIX0_PIM0SA, 0 ); /* disable */
|
|
|
|
|
out32r( PCIX0_PIM1SA, 0 ); /* disable */
|
|
|
|
|
out32r( PCIX0_PIM2SA, 0 ); /* disable */
|
|
|
|
|
out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------+
|
|
|
|
|
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
|
|
|
|
|
* strapping options to not support sizes such as 128/256 MB.
|
|
|
|
|
*-------------------------------------------------------------------*/
|
2008-10-16 13:01:15 +00:00
|
|
|
out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
|
2006-06-30 14:30:46 +00:00
|
|
|
out32r( PCIX0_PIM0LAH, 0 );
|
|
|
|
|
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
|
|
|
|
|
out32r( PCIX0_BAR0, 0 );
|
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------+
|
|
|
|
|
* Program the board's subsystem id/vendor id
|
|
|
|
|
*-------------------------------------------------------------------*/
|
2008-10-16 13:01:15 +00:00
|
|
|
out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
|
|
|
|
|
out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
|
2006-06-30 14:30:46 +00:00
|
|
|
|
|
|
|
|
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
|
|
|
|
|
}
|
2008-10-16 13:01:15 +00:00
|
|
|
#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
|
2006-06-30 14:30:46 +00:00
|
|
|
|
2006-08-10 10:43:17 +00:00
|
|
|
#if defined(CONFIG_PCI)
|
2006-06-30 14:30:46 +00:00
|
|
|
/*************************************************************************
|
|
|
|
|
* is_pci_host
|
|
|
|
|
*
|
|
|
|
|
* This routine is called to determine if a pci scan should be
|
|
|
|
|
* performed. With various hardware environments (especially cPCI and
|
|
|
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
|
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
|
|
|
*
|
|
|
|
|
* Rather than hard-code a bad assumption in the general 440 code, the
|
|
|
|
|
* 440 pci code requires the board to decide at runtime.
|
|
|
|
|
*
|
|
|
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
|
|
|
*
|
|
|
|
|
*
|
|
|
|
|
************************************************************************/
|
|
|
|
|
int is_pci_host(struct pci_controller *hose)
|
|
|
|
|
{
|
|
|
|
|
/* The yucca board is always configured as host. */
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
2006-08-10 10:43:17 +00:00
|
|
|
|
2008-06-30 12:05:05 +00:00
|
|
|
static int yucca_pcie_card_present(int port)
|
2006-08-10 10:43:17 +00:00
|
|
|
{
|
|
|
|
|
u16 reg;
|
|
|
|
|
|
|
|
|
|
reg = in_be16((u16 *)FPGA_REG1C);
|
|
|
|
|
switch(port) {
|
|
|
|
|
case 0:
|
|
|
|
|
return !(reg & FPGA_REG1C_PE0_PRSNT);
|
|
|
|
|
case 1:
|
|
|
|
|
return !(reg & FPGA_REG1C_PE1_PRSNT);
|
|
|
|
|
case 2:
|
|
|
|
|
return !(reg & FPGA_REG1C_PE2_PRSNT);
|
|
|
|
|
default:
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* For the given slot, set rootpoint mode, send power to the slot,
|
|
|
|
|
* turn on the green LED and turn off the yellow LED, enable the clock
|
|
|
|
|
* and turn off reset.
|
|
|
|
|
*/
|
|
|
|
|
void yucca_setup_pcie_fpga_rootpoint(int port)
|
|
|
|
|
{
|
|
|
|
|
u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
|
|
|
|
|
|
|
|
|
|
switch(port) {
|
|
|
|
|
case 0:
|
|
|
|
|
rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
|
|
|
|
|
endpoint = 0;
|
2008-05-20 14:00:29 +00:00
|
|
|
power = FPGA_REG1A_PE0_PWRON;
|
2006-08-10 10:43:17 +00:00
|
|
|
green_led = FPGA_REG1A_PE0_GLED;
|
2008-05-20 14:00:29 +00:00
|
|
|
clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
|
2006-08-10 10:43:17 +00:00
|
|
|
yellow_led = FPGA_REG1A_PE0_YLED;
|
|
|
|
|
reset_off = FPGA_REG1C_PE0_PERST;
|
|
|
|
|
break;
|
|
|
|
|
case 1:
|
|
|
|
|
rootpoint = 0;
|
|
|
|
|
endpoint = FPGA_REG1C_PE1_ENDPOINT;
|
2008-05-20 14:00:29 +00:00
|
|
|
power = FPGA_REG1A_PE1_PWRON;
|
2006-08-10 10:43:17 +00:00
|
|
|
green_led = FPGA_REG1A_PE1_GLED;
|
2008-05-20 14:00:29 +00:00
|
|
|
clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
|
2006-08-10 10:43:17 +00:00
|
|
|
yellow_led = FPGA_REG1A_PE1_YLED;
|
|
|
|
|
reset_off = FPGA_REG1C_PE1_PERST;
|
|
|
|
|
break;
|
|
|
|
|
case 2:
|
|
|
|
|
rootpoint = 0;
|
|
|
|
|
endpoint = FPGA_REG1C_PE2_ENDPOINT;
|
2008-05-20 14:00:29 +00:00
|
|
|
power = FPGA_REG1A_PE2_PWRON;
|
2006-08-10 10:43:17 +00:00
|
|
|
green_led = FPGA_REG1A_PE2_GLED;
|
2008-05-20 14:00:29 +00:00
|
|
|
clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
|
2006-08-10 10:43:17 +00:00
|
|
|
yellow_led = FPGA_REG1A_PE2_YLED;
|
|
|
|
|
reset_off = FPGA_REG1C_PE2_PERST;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
out_be16((u16 *)FPGA_REG1A,
|
|
|
|
|
~(power | clock | green_led) &
|
|
|
|
|
(yellow_led | in_be16((u16 *)FPGA_REG1A)));
|
|
|
|
|
|
|
|
|
|
out_be16((u16 *)FPGA_REG1C,
|
|
|
|
|
~(endpoint | reset_off) &
|
|
|
|
|
(rootpoint | in_be16((u16 *)FPGA_REG1C)));
|
|
|
|
|
/*
|
|
|
|
|
* Leave device in reset for a while after powering on the
|
|
|
|
|
* slot to give it a chance to initialize.
|
|
|
|
|
*/
|
|
|
|
|
udelay(250 * 1000);
|
|
|
|
|
|
|
|
|
|
out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
|
|
|
|
|
}
|
2006-08-29 06:05:15 +00:00
|
|
|
/*
|
|
|
|
|
* For the given slot, set endpoint mode, send power to the slot,
|
|
|
|
|
* turn on the green LED and turn off the yellow LED, enable the clock
|
|
|
|
|
* .In end point mode reset bit is read only.
|
|
|
|
|
*/
|
|
|
|
|
void yucca_setup_pcie_fpga_endpoint(int port)
|
|
|
|
|
{
|
|
|
|
|
u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
|
|
|
|
|
|
|
|
|
|
switch(port) {
|
|
|
|
|
case 0:
|
|
|
|
|
rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
|
|
|
|
|
endpoint = 0;
|
2008-05-20 14:00:29 +00:00
|
|
|
power = FPGA_REG1A_PE0_PWRON;
|
2006-08-29 06:05:15 +00:00
|
|
|
green_led = FPGA_REG1A_PE0_GLED;
|
2008-05-20 14:00:29 +00:00
|
|
|
clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
|
2006-08-29 06:05:15 +00:00
|
|
|
yellow_led = FPGA_REG1A_PE0_YLED;
|
|
|
|
|
reset_off = FPGA_REG1C_PE0_PERST;
|
|
|
|
|
break;
|
|
|
|
|
case 1:
|
|
|
|
|
rootpoint = 0;
|
|
|
|
|
endpoint = FPGA_REG1C_PE1_ENDPOINT;
|
2008-05-20 14:00:29 +00:00
|
|
|
power = FPGA_REG1A_PE1_PWRON;
|
2006-08-29 06:05:15 +00:00
|
|
|
green_led = FPGA_REG1A_PE1_GLED;
|
2008-05-20 14:00:29 +00:00
|
|
|
clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
|
2006-08-29 06:05:15 +00:00
|
|
|
yellow_led = FPGA_REG1A_PE1_YLED;
|
|
|
|
|
reset_off = FPGA_REG1C_PE1_PERST;
|
|
|
|
|
break;
|
|
|
|
|
case 2:
|
|
|
|
|
rootpoint = 0;
|
|
|
|
|
endpoint = FPGA_REG1C_PE2_ENDPOINT;
|
2008-05-20 14:00:29 +00:00
|
|
|
power = FPGA_REG1A_PE2_PWRON;
|
2006-08-29 06:05:15 +00:00
|
|
|
green_led = FPGA_REG1A_PE2_GLED;
|
2008-05-20 14:00:29 +00:00
|
|
|
clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
|
2006-08-29 06:05:15 +00:00
|
|
|
yellow_led = FPGA_REG1A_PE2_YLED;
|
|
|
|
|
reset_off = FPGA_REG1C_PE2_PERST;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
out_be16((u16 *)FPGA_REG1A,
|
|
|
|
|
~(power | clock | green_led) &
|
|
|
|
|
(yellow_led | in_be16((u16 *)FPGA_REG1A)));
|
|
|
|
|
|
|
|
|
|
out_be16((u16 *)FPGA_REG1C,
|
|
|
|
|
~(rootpoint | reset_off) &
|
|
|
|
|
(endpoint | in_be16((u16 *)FPGA_REG1C)));
|
|
|
|
|
}
|
|
|
|
|
|
2006-08-10 10:43:17 +00:00
|
|
|
static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
|
|
|
|
|
|
2007-09-07 16:20:23 +00:00
|
|
|
void pcie_setup_hoses(int busno)
|
2006-08-10 10:43:17 +00:00
|
|
|
{
|
|
|
|
|
struct pci_controller *hose;
|
|
|
|
|
int i, bus;
|
2007-10-13 14:43:23 +00:00
|
|
|
int ret = 0;
|
2007-09-07 16:35:37 +00:00
|
|
|
char *env;
|
|
|
|
|
unsigned int delay;
|
2006-08-10 10:43:17 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* assume we're called after the PCIX hose is initialized, which takes
|
|
|
|
|
* bus ID 0 and therefore start numbering PCIe's from 1.
|
|
|
|
|
*/
|
2007-09-07 16:20:23 +00:00
|
|
|
bus = busno;
|
2006-08-10 10:43:17 +00:00
|
|
|
for (i = 0; i <= 2; i++) {
|
|
|
|
|
/* Check for yucca card presence */
|
|
|
|
|
if (!yucca_pcie_card_present(i))
|
|
|
|
|
continue;
|
|
|
|
|
|
2007-10-13 14:43:23 +00:00
|
|
|
if (is_end_point(i)) {
|
|
|
|
|
yucca_setup_pcie_fpga_endpoint(i);
|
|
|
|
|
ret = ppc4xx_init_pcie_endport(i);
|
|
|
|
|
} else {
|
|
|
|
|
yucca_setup_pcie_fpga_rootpoint(i);
|
|
|
|
|
ret = ppc4xx_init_pcie_rootport(i);
|
2006-08-10 10:43:17 +00:00
|
|
|
}
|
2007-10-13 14:43:23 +00:00
|
|
|
if (ret) {
|
2007-11-05 06:43:05 +00:00
|
|
|
printf("PCIE%d: initialization as %s failed\n", i,
|
|
|
|
|
is_end_point(i) ? "endpoint" : "root-complex");
|
|
|
|
|
continue;
|
|
|
|
|
}
|
2006-08-10 10:43:17 +00:00
|
|
|
|
|
|
|
|
hose = &pcie_hose[i];
|
|
|
|
|
hose->first_busno = bus;
|
2007-09-07 16:20:23 +00:00
|
|
|
hose->last_busno = bus;
|
|
|
|
|
hose->current_busno = bus;
|
2006-08-10 10:43:17 +00:00
|
|
|
|
|
|
|
|
/* setup mem resource */
|
|
|
|
|
pci_set_region(hose->regions + 0,
|
2008-10-16 13:01:15 +00:00
|
|
|
CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
|
|
|
|
|
CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
|
|
|
|
|
CONFIG_SYS_PCIE_MEMSIZE,
|
2007-10-13 14:43:23 +00:00
|
|
|
PCI_REGION_MEM);
|
2006-08-10 10:43:17 +00:00
|
|
|
hose->region_count = 1;
|
|
|
|
|
pci_register_hose(hose);
|
|
|
|
|
|
2007-10-13 14:43:23 +00:00
|
|
|
if (is_end_point(i)) {
|
|
|
|
|
ppc4xx_setup_pcie_endpoint(hose, i);
|
|
|
|
|
/*
|
|
|
|
|
* Reson for no scanning is endpoint can not generate
|
|
|
|
|
* upstream configuration accesses.
|
2008-05-20 14:00:29 +00:00
|
|
|
*/
|
2007-10-13 14:43:23 +00:00
|
|
|
} else {
|
|
|
|
|
ppc4xx_setup_pcie_rootpoint(hose, i);
|
|
|
|
|
env = getenv("pciscandelay");
|
|
|
|
|
if (env != NULL) {
|
|
|
|
|
delay = simple_strtoul(env, NULL, 10);
|
|
|
|
|
if (delay > 5)
|
2008-05-20 14:00:29 +00:00
|
|
|
printf("Warning, expect noticable delay before "
|
2007-10-13 14:43:23 +00:00
|
|
|
"PCIe scan due to 'pciscandelay' value!\n");
|
|
|
|
|
mdelay(delay * 1000);
|
|
|
|
|
}
|
2007-09-07 16:35:37 +00:00
|
|
|
|
2007-10-13 14:43:23 +00:00
|
|
|
/*
|
|
|
|
|
* Config access can only go down stream
|
2008-05-20 14:00:29 +00:00
|
|
|
*/
|
2007-10-13 14:43:23 +00:00
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
|
|
|
bus = hose->last_busno + 1;
|
|
|
|
|
}
|
2006-08-10 10:43:17 +00:00
|
|
|
}
|
|
|
|
|
}
|
2006-06-30 14:30:46 +00:00
|
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
|
|
|
|
|
|
int misc_init_f (void)
|
|
|
|
|
{
|
|
|
|
|
uint reg;
|
|
|
|
|
|
|
|
|
|
out16(FPGA_REG10, (in16(FPGA_REG10) &
|
|
|
|
|
~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) |
|
|
|
|
|
FPGA_REG10_10MHZ_ENABLE |
|
|
|
|
|
FPGA_REG10_100MHZ_ENABLE |
|
|
|
|
|
FPGA_REG10_GIGABIT_ENABLE |
|
|
|
|
|
FPGA_REG10_FULL_DUPLEX );
|
|
|
|
|
|
|
|
|
|
udelay(10000); /* wait 10ms */
|
|
|
|
|
|
|
|
|
|
out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH));
|
|
|
|
|
|
|
|
|
|
/* minimal init for PCIe */
|
|
|
|
|
/* pci express 0 Endpoint Mode */
|
2008-06-30 12:05:05 +00:00
|
|
|
mfsdr(SDRN_PESDR_DLPSET(0), reg);
|
2006-06-30 14:30:46 +00:00
|
|
|
reg &= (~0x00400000);
|
2008-06-30 12:05:05 +00:00
|
|
|
mtsdr(SDRN_PESDR_DLPSET(0), reg);
|
2006-06-30 14:30:46 +00:00
|
|
|
/* pci express 1 Rootpoint Mode */
|
2008-06-30 12:05:05 +00:00
|
|
|
mfsdr(SDRN_PESDR_DLPSET(1), reg);
|
2006-06-30 14:30:46 +00:00
|
|
|
reg |= 0x00400000;
|
2008-06-30 12:05:05 +00:00
|
|
|
mtsdr(SDRN_PESDR_DLPSET(1), reg);
|
2006-06-30 14:30:46 +00:00
|
|
|
/* pci express 2 Rootpoint Mode */
|
2008-06-30 12:05:05 +00:00
|
|
|
mfsdr(SDRN_PESDR_DLPSET(2), reg);
|
2006-06-30 14:30:46 +00:00
|
|
|
reg |= 0x00400000;
|
2008-06-30 12:05:05 +00:00
|
|
|
mtsdr(SDRN_PESDR_DLPSET(2), reg);
|
2006-06-30 14:30:46 +00:00
|
|
|
|
|
|
|
|
out16(FPGA_REG1C,(in16 (FPGA_REG1C) &
|
|
|
|
|
~FPGA_REG1C_PE0_ROOTPOINT &
|
|
|
|
|
~FPGA_REG1C_PE1_ENDPOINT &
|
|
|
|
|
~FPGA_REG1C_PE2_ENDPOINT));
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void fpga_init(void)
|
|
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
* by default sdram access is disabled by fpga
|
|
|
|
|
*/
|
|
|
|
|
out16(FPGA_REG10, (in16 (FPGA_REG10) |
|
|
|
|
|
FPGA_REG10_SDRAM_ENABLE |
|
|
|
|
|
FPGA_REG10_ENABLE_DISPLAY ));
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_POST
|
|
|
|
|
/*
|
|
|
|
|
* Returns 1 if keys pressed to start the power-on long-running tests
|
|
|
|
|
* Called from board_init_f().
|
|
|
|
|
*/
|
|
|
|
|
int post_hotkeys_pressed(void)
|
|
|
|
|
{
|
|
|
|
|
return (ctrlc());
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
|
|
|
| onboard_pci_arbiter_selected => from EPLD
|
|
|
|
|
+---------------------------------------------------------------------------*/
|
|
|
|
|
int onboard_pci_arbiter_selected(int core_pci)
|
|
|
|
|
{
|
|
|
|
|
#if 0
|
|
|
|
|
unsigned long onboard_pci_arbiter_sel;
|
|
|
|
|
|
|
|
|
|
onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK;
|
|
|
|
|
|
|
|
|
|
if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL)
|
|
|
|
|
return (BOARD_OPTION_SELECTED);
|
|
|
|
|
else
|
|
|
|
|
#endif
|
|
|
|
|
return (BOARD_OPTION_NOT_SELECTED);
|
|
|
|
|
}
|
2008-09-01 03:37:00 +00:00
|
|
|
|
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
|
|
|
{
|
2009-02-11 08:29:33 +00:00
|
|
|
cpu_eth_init(bis);
|
2008-09-01 03:37:00 +00:00
|
|
|
return pci_eth_init(bis);
|
|
|
|
|
}
|
