Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 15:41:40 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/imx8mq_cm_defconfig

92 lines
2.1 KiB
Text
Raw Normal View History

ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
CONFIG_SYS_TEXT_BASE=0x40200000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_SYS_MALLOC_LEN=0x600000
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:30 +00:00
CONFIG_SPL_GPIO=y
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x400000
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="imx8mq-cm"
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_SPL_TEXT_BASE=0x7E1000
CONFIG_TARGET_IMX8MQ_CM=y
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
CONFIG_SPL_MMC=y
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
CONFIG_SPL_SERIAL=y
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_SPL=y
Convert CONFIG_IMX_BOOTAUX et al to Kconfig This converts the following to Kconfig: CONFIG_IMX_BOOTAUX CONFIG_IMX_THERMAL Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-08 03:59:45 +00:00
CONFIG_IMX_BOOTAUX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0x40480000
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_DISTRO_DEFAULTS=y
Convert CONFIG_REMAKE_ELF to Kconfig This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-01-29 15:25:30 +00:00
CONFIG_REMAKE_ELF=y
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_FIT=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOARD_LATE_INIT=y
Convert CONFIG_SPL_PAD_TO et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-16 21:20:26 +00:00
CONFIG_SPL_MAX_SIZE=0x1f000
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_SPL_BOARD_INIT=y
Convert CONFIG_CONS_INDEX et al to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:51 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
CONFIG_SPL_I2C=y
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_SYS_PROMPT="u-boot=> "
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=64
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=1050
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=1
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
Convert CONFIG_ETHPRIME to Kconfig This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:07 +00:00
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FEC"
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
CONFIG_MXC_GPIO=y
CONFIG_DM_I2C=y
Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:24 +00:00
CONFIG_SPL_SYS_I2C_LEGACY=y
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y
CONFIG_PHY_ATHEROS=y
CONFIG_DM_ETH=y
CONFIG_PHY_GIGE=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_BD71837=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
imx: imx8mq-cm: enable CONFIG_DM_SERIAL Marked related nodes as u-boot,dm-spl for serial driver model Enable CONFIG_DM_SERIAL Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-05 07:43:39 +00:00
CONFIG_DM_SERIAL=y
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2021-04-23 07:45:52 +00:00
CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_WATCHDOG=y
CONFIG_WDT=y
Reference in a new issue Copy permalink