u-boot/include/configs/sun50i.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Configuration settings for the Allwinner A64 (sun50i) CPU
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * A64 specific configuration
 */

#ifdef CONFIG_USB_EHCI_HCD
#define CONFIG_USB_EHCI_SUNXI
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#endif

#define CONFIG_SUNXI_USB_PHYS	1

#define GICD_BASE		0x1c81000
#define GICC_BASE		0x1c82000

/*
 * Include common sunxi configuration where most the settings are
 */
#include <configs/sunxi-common.h>

#endif /* __CONFIG_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
sunxi: Add support for Allwinner A64 SoCs The Allwinner A64 SoC is used in the Pine64. This patch adds all bits necessary to compile U-Boot for it running in AArch64 mode. Unfortunately SPL is not ready yet due to legal problems, so we need to boot using the binary boot0 for now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: remove SPL code, move to AArch64] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-03-29 15:29:10 +00:00			`/*`
			`* Configuration settings for the Allwinner A64 (sun50i) CPU`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`/*`
			`* A64 specific configuration`
			`*/`

Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de> 2017-05-13 02:33:27 +00:00			`#ifdef CONFIG_USB_EHCI_HCD`
sunxi: A64: enable USB support Mostly by adding MACH_SUN50I to some existing #ifdefs enable support for the the HCI0 USB host controller on the A64. Fix up some minor 64-bit hiccups on the way. Add the bare minimum DT bits to the A64 .dtsi and enable the controllers and the PHY on the Pine64. This is limited to the first USB controller at the moment, which is connected to the lower USB socket on the Pine64 board. [Andre: remove unneeded defines, enable OHCI, add commit message] Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-10-21 01:24:30 +00:00			`#define CONFIG_USB_EHCI_SUNXI`
			`#define CONFIG_USB_MAX_CONTROLLER_COUNT 1`
			`#endif`

sunxi: Add support for Allwinner A64 SoCs The Allwinner A64 SoC is used in the Pine64. This patch adds all bits necessary to compile U-Boot for it running in AArch64 mode. Unfortunately SPL is not ready yet due to legal problems, so we need to boot using the binary boot0 for now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: remove SPL code, move to AArch64] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-03-29 15:29:10 +00:00			`#define CONFIG_SUNXI_USB_PHYS 1`

			`#define GICD_BASE 0x1c81000`
			`#define GICC_BASE 0x1c82000`

			`/*`
			`* Include common sunxi configuration where most the settings are`
			`*/`
			`#include <configs/sunxi-common.h>`

			`#endif /* __CONFIG_H */`