Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-08 14:14:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/mx7ulp_evk/imximage.cfg

132 lines
3.2 KiB
INI
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
imx: imx7ulp: add EVK board support Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-02-22 08:21:56 +00:00
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
#define __ASSEMBLY__
#include <config.h>
/* image version */
IMAGE_VERSION 2
/*
* Boot Device : one of
* spi/sd/nand/onenand, qspi/nor
*/
BOOT_FROM sd
#ifdef CONFIG_USE_IMXIMG_PLUGIN
/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/
PLUGIN board/freescale/mx7ulp_evk/plugin.bin 0x2F020000
#else
imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB CONFIG_SECURE_BOOT is too generic and forbids to use it for cross architecture purposes. If Secure Boot is required for imx, this means to enable and use the HAB processor in the soc. Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-09-20 06:47:53 +00:00
#ifdef CONFIG_IMX_HAB
imx: imx7ulp: add EVK board support Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-02-22 08:21:56 +00:00
CSF CONFIG_CSF_SIZE
#endif
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
DATA 4 0x403f00dc 0x00000000
DATA 4 0x403e0040 0x01000020
mx7ulp_evk: Change APLL and its PFD0 frequencies To support HDMI display on EVK board, the LCDIF pix clock must be 25.2Mhz. Since the its PCC divider range is from 1-8, the max rate of LCDIF PCC source clock is 201.6Mhz. This limits the source clock must from NIC1 bus clock or NIC1 clock, other sources from APLL PFDs are higher than this max rate. The NIC1 bus clock and NIC1 clock are from DDRCLK whose parent source is APLL PFD0, so we must change the APLL PFD0 and have impact to DDRCLK, NIC1 and NIC1 bus. Eventually, this requests to set the APLL PFD0 frequency to 302.4Mhz (25.2 * 12), with settings: PFD0 FRAC: 32 APLL MULT: 22 APLL NUM: 2 APLL DENOM: 5 Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-05-15 09:56:56 +00:00
DATA 4 0x403e0500 0x01000000
imx: imx7ulp: add EVK board support Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-02-22 08:21:56 +00:00
DATA 4 0x403e050c 0x80808080
mx7ulp: Select the SCG1 APLL PFD as a system clock source Due to the APLL out glitch issue, the APLLCFG PLLS bit must be set to select SCG1 APLL PFD for generating system clock to align with the design. Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-05-15 09:56:59 +00:00
DATA 4 0x403e0508 0x00160002
mx7ulp_evk: Update DDR freq to 352.8Mhz for ULP B0 On i.MX7ULP B0, the DDR clock target is increased from 320Mhz to 380Mhz. We update DDR clock relevant settings to approach the target. But since the limitation on LCDIF pix clock for HDMI output (refer "mx7ulp_evk: Change APLL and its PFD0 frequencies"), we set DDR clock to 352.8Mhz (25.2Mhz * 14) by using the clock path: APLL PFD0 -> DDR CLK -> NIC0 -> NIC1 -> LCDIF clock To reduce the impact to entire system, the NIC0_DIV and NIC1_DIV are kept, so the divider 14 is calculated as: 14 = (NIC0_DIV + 1) * (NIC1_DIV + 1) * (LCDIF_PCC_DIV + 1) NIC0_DIV: 1 NIC1_DIV: 0 LCDIF_PCC_DIV: 6 APLL and APLL PFD0 settings: PFD0 FRAC: 27 APLL MULT: 22 APLL NUM: 1 APLL DENOM: 20 This patch applies the new settings for both DCD and plugin. There is no DDR script change on this new frequency. Overnight memtester is passed. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-05-15 09:57:01 +00:00
DATA 4 0x403E0510 0x00000001
DATA 4 0x403E0514 0x00000014
mx7ulp_evk: Change APLL and its PFD0 frequencies To support HDMI display on EVK board, the LCDIF pix clock must be 25.2Mhz. Since the its PCC divider range is from 1-8, the max rate of LCDIF PCC source clock is 201.6Mhz. This limits the source clock must from NIC1 bus clock or NIC1 clock, other sources from APLL PFDs are higher than this max rate. The NIC1 bus clock and NIC1 clock are from DDRCLK whose parent source is APLL PFD0, so we must change the APLL PFD0 and have impact to DDRCLK, NIC1 and NIC1 bus. Eventually, this requests to set the APLL PFD0 frequency to 302.4Mhz (25.2 * 12), with settings: PFD0 FRAC: 32 APLL MULT: 22 APLL NUM: 2 APLL DENOM: 5 Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-05-15 09:56:56 +00:00
DATA 4 0x403e0500 0x00000001
CHECK_BITS_SET 4 0x403e0500 0x01000000
mx7ulp_evk: Update DDR freq to 352.8Mhz for ULP B0 On i.MX7ULP B0, the DDR clock target is increased from 320Mhz to 380Mhz. We update DDR clock relevant settings to approach the target. But since the limitation on LCDIF pix clock for HDMI output (refer "mx7ulp_evk: Change APLL and its PFD0 frequencies"), we set DDR clock to 352.8Mhz (25.2Mhz * 14) by using the clock path: APLL PFD0 -> DDR CLK -> NIC0 -> NIC1 -> LCDIF clock To reduce the impact to entire system, the NIC0_DIV and NIC1_DIV are kept, so the divider 14 is calculated as: 14 = (NIC0_DIV + 1) * (NIC1_DIV + 1) * (LCDIF_PCC_DIV + 1) NIC0_DIV: 1 NIC1_DIV: 0 LCDIF_PCC_DIV: 6 APLL and APLL PFD0 settings: PFD0 FRAC: 27 APLL MULT: 22 APLL NUM: 1 APLL DENOM: 20 This patch applies the new settings for both DCD and plugin. There is no DDR script change on this new frequency. Overnight memtester is passed. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-05-15 09:57:01 +00:00
DATA 4 0x403e050c 0x8080801B
imx: imx7ulp: add EVK board support Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-02-22 08:21:56 +00:00
CHECK_BITS_SET 4 0x403e050c 0x00000040
DATA 4 0x403E0030 0x00000001
DATA 4 0x403e0040 0x11000020
DATA 4 0x403f00dc 0x42000000
DATA 4 0x40B300AC 0x40000000
DATA 4 0x40AD0128 0x00040000
DATA 4 0x40AD00F8 0x00000000
DATA 4 0x40AD00D8 0x00000180
DATA 4 0x40AD0108 0x00000180
DATA 4 0x40AD0104 0x00000180
DATA 4 0x40AD0124 0x00010000
DATA 4 0x40AD0080 0x0000018C
DATA 4 0x40AD0084 0x0000018C
DATA 4 0x40AD0088 0x0000018C
DATA 4 0x40AD008C 0x0000018C
DATA 4 0x40AD0120 0x00010000
DATA 4 0x40AD010C 0x00000180
DATA 4 0x40AD0110 0x00000180
DATA 4 0x40AD0114 0x00000180
DATA 4 0x40AD0118 0x00000180
DATA 4 0x40AD0090 0x00000180
DATA 4 0x40AD0094 0x00000180
DATA 4 0x40AD0098 0x00000180
DATA 4 0x40AD009C 0x00000180
DATA 4 0x40AD00E0 0x00040000
DATA 4 0x40AD00E4 0x00040000
DATA 4 0x40AB001C 0x00008000
DATA 4 0x40AB0800 0xA1390003
DATA 4 0x40AB085C 0x0D3900A0
DATA 4 0x40AB0890 0x00400000
DATA 4 0x40AB0848 0x40404040
DATA 4 0x40AB0850 0x40404040
DATA 4 0x40AB081C 0x33333333
DATA 4 0x40AB0820 0x33333333
DATA 4 0x40AB0824 0x33333333
DATA 4 0x40AB0828 0x33333333
DATA 4 0x40AB08C0 0x24922492
DATA 4 0x40AB08B8 0x00000800
DATA 4 0x40AB0004 0x00020052
DATA 4 0x40AB000C 0x292C42F3
DATA 4 0x40AB0010 0x00100A22
DATA 4 0x40AB0038 0x00120556
DATA 4 0x40AB0014 0x00C700DB
DATA 4 0x40AB0018 0x00211718
DATA 4 0x40AB002C 0x0F9F26D2
DATA 4 0x40AB0030 0x009F0E10
DATA 4 0x40AB0040 0x0000003F
DATA 4 0x40AB0000 0xC3190000
mx7ulp_evk: Update LPDDR3 script Update LPDDR3 script with the changes below: -Update the precharge command to CMD=01 at the DDR initialization phase -remove unimplemented registers Write data bit delay --refer to the DDR_TRIM bits in IOMUXC1_DDR_SW_PAD_CTL_PAD_DDRn Test: One EVK board passes overnight stress test. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-05-15 09:56:53 +00:00
DATA 4 0x40AB001C 0x00008010
DATA 4 0x40AB001C 0x00008018
imx: imx7ulp: add EVK board support Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-02-22 08:21:56 +00:00
DATA 4 0x40AB001C 0x003F8030
DATA 4 0x40AB001C 0x003F8038
DATA 4 0x40AB001C 0xFF0A8030
DATA 4 0x40AB001C 0xFF0A8038
DATA 4 0x40AB001C 0x04028030
DATA 4 0x40AB001C 0x04028038
DATA 4 0x40AB001C 0x83018030
DATA 4 0x40AB001C 0x83018038
DATA 4 0x40AB001C 0x01038030
DATA 4 0x40AB001C 0x01038038
DATA 4 0x40AB083C 0x20000000
DATA 4 0x40AB0020 0x00001800
DATA 4 0x40AB0800 0xA1310000
DATA 4 0x40AB0004 0x00020052
DATA 4 0x40AB0404 0x00011006
DATA 4 0x40AB001C 0x00000000
#endif
Reference in a new issue Copy permalink