u-boot/arch/arm/mach-stm32mp/Kconfig

227 lines
5.8 KiB
Text
Raw Normal View History

if ARCH_STM32MP
config SPL
select SPL_BOARD_INIT
select SPL_CLK
select SPL_DM
select SPL_DM_SEQ_ALIAS
select SPL_DRIVERS_MISC
select SPL_FRAMEWORK
select SPL_GPIO
select SPL_LIBCOMMON_SUPPORT
select SPL_LIBGENERIC_SUPPORT
select SPL_OF_CONTROL
select SPL_OF_TRANSLATE
select SPL_PINCTRL
select SPL_REGMAP
select SPL_DM_RESET
select SPL_SERIAL
select SPL_SYSCON
select SPL_WATCHDOG if WATCHDOG
imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
imply SPL_BOOTSTAGE if BOOTSTAGE
imply SPL_DISPLAY_PRINT
imply SPL_LIBDISK_SUPPORT
imply SPL_SPI_LOAD if SPL_SPI
config SYS_SOC
default "stm32mp"
config SYS_MALLOC_LEN
default 0x2000000
config ENV_SIZE
default 0x2000
config STM32MP15x
bool "Support STMicroelectronics STM32MP15x Soc"
select ARCH_SUPPORT_PSCI
select BINMAN
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select OF_BOARD_SETUP
select PINCTRL_STM32
select STM32_RCC
select STM32_RESET
select STM32_SERIAL
select SYS_ARCH_TIMER
imply CMD_NVEDIT_INFO
help
support of STMicroelectronics SOC STM32MP15x family
STM32MP157, STM32MP153 or STM32MP151
STMicroelectronics MPU with core ARMv7
dual core A7 for STM32MP157/3, monocore for STM32MP151
target all the STMicroelectronics board with SOC STM32MP1 family
config STM32MP15x_STM32IMAGE
bool "Support STM32 image for generated U-Boot image"
depends on STM32MP15x && TFABOOT
help
Support of STM32 image generation for SOC STM32MP15x
for TF-A boot when FIP container is not used
choice
prompt "STM32MP15x board select"
optional
config TARGET_ST_STM32MP15x
bool "STMicroelectronics STM32MP15x boards"
select STM32MP15x
imply BOOTSTAGE
imply CMD_BOOTSTAGE
imply CMD_CLS if CMD_BMP
imply DISABLE_CONSOLE
imply PRE_CONSOLE_BUFFER
imply SILENT_CONSOLE
help
target the STMicroelectronics board with SOC STM32MP15x
managed by board/st/stm32mp1:
Evalulation board (EV1) or Discovery board (DK1 and DK2).
The difference between board are managed with devicetree
config TARGET_MICROGEA_STM32MP1
bool "Engicam MicroGEA STM32MP1 SOM"
select STM32MP15x
imply BOOTSTAGE
imply CMD_BOOTSTAGE
imply CMD_CLS if CMD_BMP
imply DISABLE_CONSOLE
imply PRE_CONSOLE_BUFFER
imply SILENT_CONSOLE
help
MicroGEA STM32MP1 is a STM32MP157A based Micro SOM.
MicroGEA STM32MP1 MicroDev 2.0:
* MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.
* MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
MicroGEA STM32MP1 MicroDev 2.0 7" OF:
* 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
panel and toucscreen.
* MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
Open Frame Solution board.
config TARGET_ICORE_STM32MP1
bool "Engicam i.Core STM32MP1 SOM"
select STM32MP15x
imply BOOTSTAGE
imply CMD_BOOTSTAGE
imply CMD_CLS if CMD_BMP
imply DISABLE_CONSOLE
imply PRE_CONSOLE_BUFFER
imply SILENT_CONSOLE
help
i.Core STM32MP1 is an EDIMM SOM based on STM32MP157A.
i.Core STM32MP1 EDIMM2.2:
* EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
* i.Core STM32MP1 needs to mount on top of EDIMM2.2 for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
i.Core STM32MP1 C.TOUCH 2.0
* C.TOUCH 2.0 is a general purpose Carrier board.
* i.Core STM32MP1 needs to mount on top of this Carrier board
for creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
config TARGET_DH_STM32MP1_PDK2
bool "DH STM32MP1 PDK2"
select STM32MP15x
help
Target the DH PDK2 development kit with STM32MP15x SoM.
endchoice
config SYS_TEXT_BASE
default 0xC0100000
config NR_DRAM_BANKS
default 1
config DDR_CACHEABLE_SIZE
hex "Size of the DDR marked cacheable in pre-reloc stage"
default 0x40000000
help
Define the size of the DDR marked as cacheable in U-Boot
pre-reloc stage.
This option can be useful to avoid speculatif access
to secured area of DDR used by TF-A or OP-TEE before U-Boot
initialization.
The areas marked "no-map" in device tree should be located
before this limit: STM32_DDR_BASE + DDR_CACHEABLE_SIZE.
config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
hex "Partition on MMC2 to use to load U-Boot from"
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
default 1
help
Partition on the second MMC to load U-Boot from when the MMC is being
used in raw mode
config STM32_ETZPC
bool "STM32 Extended TrustZone Protection"
depends on STM32MP15x
default y
imply BOOTP_SERVERIP
help
Say y to enable STM32 Extended TrustZone Protection
config STM32_ECDSA_VERIFY
bool "STM32 ECDSA verification via the ROM API"
depends on SPL_ECDSA_VERIFY
default y
help
Say y to enable the uclass driver for ECDSA verification using the
ROM API provided on STM32MP.
The ROM API is only available during SPL for now.
config CMD_STM32KEY
bool "command stm32key to fuse public key hash"
help
fuse public key hash in corresponding fuse used to authenticate
binary.
This command is used to evaluate the secure boot on stm32mp SOC,
it is deactivated by default in real products.
config PRE_CON_BUF_ADDR
default 0xC02FF000
config PRE_CON_BUF_SZ
default 4096
config BOOTSTAGE_STASH_ADDR
default 0xC3000000
if BOOTCOUNT_GENERIC
config SYS_BOOTCOUNT_SINGLEWORD
default y
# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
config SYS_BOOTCOUNT_ADDR
default 0x5C00A154
endif
if DEBUG_UART
config DEBUG_UART_BOARD_INIT
default y
# debug on UART4 by default
config DEBUG_UART_BASE
default 0x40010000
# clock source is HSI on reset
config DEBUG_UART_CLOCK
default 64000000
endif
source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
source "board/dhelectronics/dh_stm32mp1/Kconfig"
source "board/engicam/stm32mp1/Kconfig"
source "board/st/stm32mp1/Kconfig"
endif