u-boot/arch/riscv/Kconfig

364 lines
9.1 KiB
Text
Raw Normal View History

menu "RISC-V architecture"
depends on RISCV
config SYS_ARCH
default "riscv"
choice
prompt "Target select"
optional
config TARGET_AX25_AE350
bool "Support ax25-ae350"
config TARGET_MICROCHIP_ICICLE
bool "Support Microchip PolarFire-SoC Icicle Board"
config TARGET_QEMU_VIRT
bool "Support QEMU Virt Board"
config TARGET_SIFIVE_UNLEASHED
bool "Support SiFive Unleashed Board"
config TARGET_SIPEED_MAIX
bool "Support Sipeed Maix Board"
endchoice
config SYS_ICACHE_OFF
bool "Do not enable icache"
default n
help
Do not enable instruction cache in U-Boot.
config SPL_SYS_ICACHE_OFF
bool "Do not enable icache in SPL"
depends on SPL
default SYS_ICACHE_OFF
help
Do not enable instruction cache in SPL.
config SYS_DCACHE_OFF
bool "Do not enable dcache"
default n
help
Do not enable data cache in U-Boot.
config SPL_SYS_DCACHE_OFF
bool "Do not enable dcache in SPL"
depends on SPL
default SYS_DCACHE_OFF
help
Do not enable data cache in SPL.
# board-specific options below
source "board/AndesTech/ax25-ae350/Kconfig"
source "board/emulation/qemu-riscv/Kconfig"
source "board/microchip/mpfs_icicle/Kconfig"
source "board/sifive/unleashed/Kconfig"
source "board/sipeed/maix/Kconfig"
# platform-specific options below
source "arch/riscv/cpu/ax25/Kconfig"
source "arch/riscv/cpu/fu540/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
# architecture-specific options below
choice
prompt "Base ISA"
default ARCH_RV32I
config ARCH_RV32I
bool "RV32I"
select 32BIT
help
Choose this option to target the RV32I base integer instruction set.
config ARCH_RV64I
bool "RV64I"
select 64BIT
select PHYS_64BIT
help
Choose this option to target the RV64I base integer instruction set.
endchoice
choice
prompt "Code Model"
default CMODEL_MEDLOW
config CMODEL_MEDLOW
bool "medium low code model"
help
U-Boot and its statically defined symbols must lie within a single 2 GiB
address range and must lie between absolute addresses -2 GiB and +2 GiB.
config CMODEL_MEDANY
bool "medium any code model"
help
U-Boot and its statically defined symbols must be within any single 2 GiB
address range.
endchoice
choice
prompt "Run Mode"
default RISCV_MMODE
config RISCV_MMODE
bool "Machine"
help
Choose this option to build U-Boot for RISC-V M-Mode.
config RISCV_SMODE
bool "Supervisor"
help
Choose this option to build U-Boot for RISC-V S-Mode.
endchoice
choice
prompt "SPL Run Mode"
default SPL_RISCV_MMODE
depends on SPL
config SPL_RISCV_MMODE
bool "Machine"
help
Choose this option to build U-Boot SPL for RISC-V M-Mode.
config SPL_RISCV_SMODE
bool "Supervisor"
help
Choose this option to build U-Boot SPL for RISC-V S-Mode.
endchoice
config RISCV_ISA_C
bool "Emit compressed instructions"
default y
help
Adds "C" to the ISA subsets that the toolchain is allowed to emit
when building U-Boot, which results in compressed instructions in the
U-Boot binary.
config RISCV_ISA_A
def_bool y
config 32BIT
bool
config 64BIT
bool
config DMA_ADDR_T_64BIT
bool
default y if 64BIT
config SIFIVE_CLINT
bool
depends on RISCV_MMODE
help
The SiFive CLINT block holds memory-mapped control and status registers
associated with software and timer interrupts.
config SPL_SIFIVE_CLINT
bool
depends on SPL_RISCV_MMODE
help
The SiFive CLINT block holds memory-mapped control and status registers
associated with software and timer interrupts.
config ANDES_PLIC
bool
depends on RISCV_MMODE || SPL_RISCV_MMODE
select REGMAP
select SYSCON
select SPL_REGMAP if SPL
select SPL_SYSCON if SPL
help
The Andes PLIC block holds memory-mapped claim and pending registers
associated with software interrupt.
config SYS_MALLOC_F_LEN
default 0x1000
config SMP
bool "Symmetric Multi-Processing"
depends on SBI_V01 || !RISCV_SMODE
help
This enables support for systems with more than one CPU. If
you say N here, U-Boot will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor
machine. If you say Y here, U-Boot will run on many, but not
all, single processor machines.
config SPL_SMP
bool "Symmetric Multi-Processing in SPL"
depends on SPL && SPL_RISCV_MMODE
default y
help
This enables support for systems with more than one CPU in SPL.
If you say N here, U-Boot SPL will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor
machine. If you say Y here, U-Boot SPL will run on many, but not
all, single processor machines.
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP || SPL_SMP
default 8
help
On multiprocessor machines, U-Boot sets up a stack for each CPU.
Stack memory is pre-allocated. U-Boot must therefore know the
maximum number of CPUs that may be present.
config SBI
bool
default y if RISCV_SMODE || SPL_RISCV_SMODE
choice
prompt "SBI support"
default SBI_V02
config SBI_V01
bool "SBI v0.1 support"
depends on SBI
help
This config allows kernel to use SBI v0.1 APIs. This will be
deprecated in future once legacy M-mode software are no longer in use.
config SBI_V02
bool "SBI v0.2 support"
depends on SBI
help
This config allows kernel to use SBI v0.2 APIs. SBI v0.2 is more
scalable and extendable to handle future needs for RISC-V supervisor
interfaces. For example, with SBI v0.2 HSM extension, only a single
hart need to boot and enter operating system. The booting hart can
bring up secondary harts one by one afterwards.
Choose this option if OpenSBI v0.7 or above release is used together
with U-Boot.
endchoice
config SBI_IPI
bool
depends on SBI
default y if RISCV_SMODE || SPL_RISCV_SMODE
depends on SMP
config XIP
bool "XIP mode"
help
XIP (eXecute In Place) is a method for executing code directly
from a NOR flash memory without copying the code to ram.
Say yes here if U-Boot boots from flash directly.
config SHOW_REGS
bool "Show registers on unhandled exception"
config RISCV_PRIV_1_9
bool "Use version 1.9 of the RISC-V priviledged specification"
help
Older versions of the RISC-V priviledged specification had
separate counter enable CSRs for each privilege mode. Writing
to the unified mcounteren CSR on a processor implementing the
old specification will result in an illegal instruction
exception. In addition to counter CSR changes, the way virtual
memory is configured was also changed.
config STACK_SIZE_SHIFT
int
default 14
config OF_BOARD_FIXUP
default y if OF_SEPARATE && RISCV_SMODE
menu "Use assembly optimized implementation of memory routines"
config USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy"
default y
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
but may increase the binary size.
config SPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for SPL"
default y if USE_ARCH_MEMCPY
depends on SPL
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
but may increase the binary size.
config TPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for TPL"
default y if USE_ARCH_MEMCPY
depends on TPL
help
Enable the generation of an optimized version of memcpy.
Such an implementation may be faster under some conditions
but may increase the binary size.
config USE_ARCH_MEMMOVE
bool "Use an assembly optimized implementation of memmove"
default y
help
Enable the generation of an optimized version of memmove.
Such an implementation may be faster under some conditions
but may increase the binary size.
config SPL_USE_ARCH_MEMMOVE
bool "Use an assembly optimized implementation of memmove for SPL"
default y if USE_ARCH_MEMCPY
depends on SPL
help
Enable the generation of an optimized version of memmove.
Such an implementation may be faster under some conditions
but may increase the binary size.
config TPL_USE_ARCH_MEMMOVE
bool "Use an assembly optimized implementation of memmove for TPL"
default y if USE_ARCH_MEMCPY
depends on TPL
help
Enable the generation of an optimized version of memmove.
Such an implementation may be faster under some conditions
but may increase the binary size.
config USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset"
default y
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
but may increase the binary size.
config SPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for SPL"
default y if USE_ARCH_MEMSET
depends on SPL
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
but may increase the binary size.
config TPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for TPL"
default y if USE_ARCH_MEMSET
depends on TPL
help
Enable the generation of an optimized version of memset.
Such an implementation may be faster under some conditions
but may increase the binary size.
endmenu
endmenu