Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-26 04:53:42 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/i2c/Kconfig

690 lines
19 KiB
Text
Raw Normal View History

drivers: hierarchize drivers Kconfig menu The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-25 17:46:26 +00:00
#
# I2C subsystem configuration
#
i2c: Create a new Kconfig for I2C At present we have CONFIG_SPL_I2C but not CONFIG_I2C. The reason CONFIG_I2C is not strictly necessary is that: a) We have CONFIG_SYS_I2C_LEGACY and CONFIG_DM_I2C for the two possible i2c stacks b) In U-Boot proper, we always build drivers/i2c/ regardless of the options Still, it is better to have CONFIG_I2C - it makes U-Boot proper similar to SPL/TPL, so we can (in a future commit) simplify the Makefile rules. Enable it by default, since as above, we have separate options (SYS_I2C_LEGACY and DM_I2C) to control whether it is 'really' enabled. Once we have migrated I2C to driver model, we can drop SYS_I2C_LEGACY and make DM_I2C become I2C. For now, this lets us simplify the Makefile rules. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:35 +00:00
menuconfig I2C
bool "I2C support"
default y
help
Note:
This is a stand-in for an option to enable I2C support. In fact this
simply enables building of the I2C directory for U-Boot. The actual
I2C feature is enabled by DM_I2C (for driver model) and
the #define CONFIG_SYS_I2C_LEGACY (for the legacy I2C stack).
So at present there is no need to ever disable this option.
Eventually it will:
Enable support for the I2C (Inter-Integrated Circuit) bus in U-Boot.
I2C works with a clock and data line which can be driven by a
one or more masters or slaves. It is a fairly complex bus but is
widely used as it only needs two lines for communication. Speeds of
400kbps are typical but up to 3.4Mbps is supported by some
hardware. Enable this option to build the drivers in drivers/i2c as
part of a U-Boot build.
if I2C
drivers: hierarchize drivers Kconfig menu The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-25 17:46:26 +00:00
i2c: add CONFIG_DM_I2C to Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-01-13 03:44:35 +00:00
config DM_I2C
bool "Enable Driver Model for I2C drivers"
depends on DM
help
Kconfig: i2c: fix help message related to dm i2c Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-03-31 16:57:17 +00:00
Enable driver model for I2C. The I2C uclass interface: probe, read,
write and speed, is implemented with the bus drivers operations,
which provide methods for bus setting and data transfer. Each chip
dm: treewide: Rename 'platdata' variables to just 'plat' We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-03 23:55:18 +00:00
device (bus child) info is kept as parent plat. The interface
i2c: remove i2c driver-model compatibility layer There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29 06:58:00 +00:00
is defined in include/i2c.h.
dm: Move CONFIG_I2C_COMPAT to Kconfig Make this option available in Kconfig and clean up the board that uses it. Note there is also an entry in exynos5-common.h but this affects multiple boards and should be dropped as part of the Samsung I2C migration to driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-13 19:20:48 +00:00
dm: i2c: allow disabling driver model in SPL At present if U-Boot proper uses driver model for I2C, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. This patch introduces a separate Kconfig symbols for enabling DM_I2C and DM_I2C_GPIO support in SPL. This will also help to get away from dirty workarounds to achieve non-DM I2C support for SPL, which is currently used in some board header files like: ifdef CONFIG_SPL_BUILD undef CONFIG_DM_I2C endif Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-02-09 11:52:43 +00:00
config SPL_DM_I2C
bool "Enable Driver Model for I2C drivers in SPL"
depends on SPL_DM && DM_I2C
default y
help
Enable driver model for I2C. The I2C uclass interface: probe, read,
write and speed, is implemented with the bus drivers operations,
which provide methods for bus setting and data transfer. Each chip
device (bus child) info is kept as parent platdata. The interface
is defined in include/i2c.h.
Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:24 +00:00
config SYS_I2C_LEGACY
bool "Enable legacy I2C subsystem and drivers"
depends on !DM_I2C
help
Enable the legacy I2C subsystem and drivers. While this is
deprecated in U-Boot itself, this can be useful in some situations
in SPL or TPL.
config SPL_SYS_I2C_LEGACY
bool "Enable legacy I2C subsystem and drivers in SPL"
depends on SUPPORT_SPL && !SPL_DM_I2C
help
Enable the legacy I2C subsystem and drivers in SPL. This is useful
in some size constrained situations.
config TPL_SYS_I2C_LEGACY
bool "Enable legacy I2C subsystem and drivers in TPL"
depends on SUPPORT_TPL && !SPL_DM_I2C
help
Enable the legacy I2C subsystem and drivers in TPL. This is useful
in some size constrained situations.
Convert CONFIG_SYS_I2C_EARLY_INIT to Kconfig Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on SPL_SYS_I2C_LEGACY. Remove the weak implementation as it's either something that needs to exist for real, or shouldn't be called. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:25 +00:00
config SYS_I2C_EARLY_INIT
bool "Enable legacy I2C subsystem early in boot"
depends on BOARD_EARLY_INIT_F && SPL_SYS_I2C_LEGACY && SYS_I2C_MXC
help
Add the function prototype for i2c_early_init_f which is called in
board_early_init_f.
dm: cros_ec: Convert the I2C tunnel code to use driver model The Chrome OS EC supports tunnelling through to an I2C bus on the EC. This currently uses a copy of the I2C command code and a special 'crosec' sub-command. With driver model we can define an I2C bus which tunnels through to the EC, and use the normal 'i2c' command to access it. This simplifies the code and removes some duplication. Add an I2C driver which tunnels through to the EC. Adjust the EC code to support binding child devices so that it can be set up. Adjust the existing I2C xfer function to fit driver model better. For now the old code remains to allow things to still work. It will be removed in a later patch once the new flow is fully enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-03 14:19:23 +00:00
config I2C_CROS_EC_TUNNEL
tristate "Chrome OS EC tunnel I2C bus"
depends on CROS_EC
help
This provides an I2C bus that will tunnel i2c commands through to
the other side of the Chrome OS EC to the I2C bus connected there.
This will work whatever the interface used to talk to the EC (SPI,
I2C or LPC). Some Chromebooks use this when the hardware design
does not allow direct access to the main PMIC from the AP.
cros_ec: Support the LDO access method used by spring Add a driver to support the special LDO access used by spring. This is a custom method in the cros_ec protocol - it does not use an I2C pass-through. There are two implementation choices: 1. Write a special LDO driver which can talk across the EC. Duplicate all the logic from TPS65090 for retrying when the LDO fails to come up. 2. Write a special I2C bus driver which pretends to be a TPS65090 and transfers reads and writes using the LDO message. Either is distasteful. The latter method is chosen since it results in less code duplication and a fairly simple (30-line) implementation of the core logic. The crosec 'ldo' subcommand could be removed (since i2c md/mw will work instead) but is retained as a convenience. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-03 14:19:24 +00:00
config I2C_CROS_EC_LDO
bool "Provide access to LDOs on the Chrome OS EC"
depends on CROS_EC
---help---
On many Chromebooks the main PMIC is inaccessible to the AP. This is
often dealt with by using an I2C pass-through interface provided by
the EC. On some unfortunate models (e.g. Spring) the pass-through
is not available, and an LDO message is available instead. This
option enables a driver which provides very basic access to those
regulators, via the EC. We implement this as an I2C bus which
emulates just the TPS65090 messages we know about. This is done to
avoid duplicating the logic in the TPS65090 regulator driver for
enabling/disabling an LDO.
dm: cros_ec: Convert the I2C tunnel code to use driver model The Chrome OS EC supports tunnelling through to an I2C bus on the EC. This currently uses a copy of the I2C command code and a special 'crosec' sub-command. With driver model we can define an I2C bus which tunnels through to the EC, and use the normal 'i2c' command to access it. This simplifies the code and removes some duplication. Add an I2C driver which tunnels through to the EC. Adjust the EC code to support binding child devices so that it can be set up. Adjust the existing I2C xfer function to fit driver model better. For now the old code remains to allow things to still work. It will be removed in a later patch once the new flow is fully enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-03 14:19:23 +00:00
i2c: Set default I2C bus number This patch allows using i2c commands (e.g. "i2c probe", "i2c md", etc) without the need to first select the bus number with e.g. "i2c dev 0". This is the "i2c" command behavior similar to the one from pre DM, where by default bus 0 was immediately accessible. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-03-21 11:08:25 +00:00
config I2C_SET_DEFAULT_BUS_NUM
bool "Set default I2C bus number"
depends on DM_I2C
help
Set default number of I2C bus to be accessed. This option provides
behaviour similar to old (i.e. pre DM) I2C bus driver.
config I2C_DEFAULT_BUS_NUMBER
hex "I2C default bus number"
depends on I2C_SET_DEFAULT_BUS_NUM
default 0x0
help
Number of default I2C bus to use
dm: i2c: add i2c-gpio driver This commit adds driver model support to software emulated i2c bus driver. This driver supports kernel-style device tree bindings. Fdt properties in use: - compatible - "i2c-gpio" - gpios - data and clock GPIO pin phandles - delay-us - micro seconds delay between GPIOs toggle operations, which is 1/4 of I2C speed clock period. Added: - Config: CONFIG_DM_I2C_GPIO - File: drivers/i2c/i2c-gpio.c - File: doc/device-tree-bindings/i2c/i2c-gpio.txt Driver base code is taken from: drivers/i2c/soft-i2c.c, changes: - use "i2c-gpio" naming - update comments style - move preprocesor macros into functions - add device tree support - add driver model i2c support - code cleanup, - add Kconfig entry Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Added braces in i2c_gpio_xfer() to fix style nit: Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-31 16:57:18 +00:00
config DM_I2C_GPIO
bool "Enable Driver Model for software emulated I2C bus driver"
depends on DM_I2C && DM_GPIO
help
Enable the i2c bus driver emulation by using the GPIOs. The bus GPIO
configuration is given by the device tree. Kernel-style device tree
bindings are supported.
Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
dm: i2c: allow disabling driver model in SPL At present if U-Boot proper uses driver model for I2C, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. This patch introduces a separate Kconfig symbols for enabling DM_I2C and DM_I2C_GPIO support in SPL. This will also help to get away from dirty workarounds to achieve non-DM I2C support for SPL, which is currently used in some board header files like: ifdef CONFIG_SPL_BUILD undef CONFIG_DM_I2C endif Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-02-09 11:52:43 +00:00
config SPL_DM_I2C_GPIO
bool "Enable Driver Model for software emulated I2C bus driver in SPL"
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:30 +00:00
depends on SPL_DM && DM_I2C_GPIO && SPL_DM_GPIO && SPL_GPIO
dm: i2c: allow disabling driver model in SPL At present if U-Boot proper uses driver model for I2C, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. This patch introduces a separate Kconfig symbols for enabling DM_I2C and DM_I2C_GPIO support in SPL. This will also help to get away from dirty workarounds to achieve non-DM I2C support for SPL, which is currently used in some board header files like: ifdef CONFIG_SPL_BUILD undef CONFIG_DM_I2C endif Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-02-09 11:52:43 +00:00
default y
help
Enable the i2c bus driver emulation by using the GPIOs. The bus GPIO
configuration is given by the device tree. Kernel-style device tree
bindings are supported.
Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
i2c: atmel: add i2c driver Add i2c driver. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2016-06-20 05:22:38 +00:00
config SYS_I2C_AT91
bool "Atmel I2C driver"
depends on DM_I2C && ARCH_AT91
help
Add support for the Atmel I2C driver. A serious problem is that there
is no documented way to issue repeated START conditions for more than
two messages, as needed to support combined I2C messages. Use the
i2c-gpio driver unless your system can cope with this limitation.
Binding info: doc/device-tree-bindings/i2c/i2c-at91.txt
drivers: i2c: add brcm iproc I2C driver support Add I2C driver support for Broadcom iproc-based socs. Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-08 05:42:27 +00:00
config SYS_I2C_IPROC
bool "Broadcom I2C driver"
depends on DM_I2C
help
Broadcom I2C driver.
Add support for Broadcom I2C driver.
Say yes here to to enable the Broadco I2C driver.
dm: fsl_i2c: Enable DM for FSL I2C Signed-off-by: Mario Six <mario.six@gdsys.cc>
2016-04-25 06:31:09 +00:00
config SYS_I2C_FSL
bool "Freescale I2C bus driver"
help
Add support for Freescale I2C busses as used on MPC8240, MPC8245, and
MPC85xx processors.
i2c: fsl_i2c: Migrate to Kconfig - As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:35 +00:00
if SYS_I2C_FSL && (SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY)
config SYS_FSL_I2C_OFFSET
hex "Offset from the IMMR of the address of the first I2C controller"
config SYS_FSL_HAS_I2C2_OFFSET
bool "Support a second I2C controller"
config SYS_FSL_I2C2_OFFSET
hex "Offset from the IMMR of the address of the second I2C controller"
depends on SYS_FSL_HAS_I2C2_OFFSET
config SYS_FSL_HAS_I2C3_OFFSET
bool "Support a third I2C controller"
config SYS_FSL_I2C3_OFFSET
hex "Offset from the IMMR of the address of the third I2C controller"
depends on SYS_FSL_HAS_I2C3_OFFSET
config SYS_FSL_HAS_I2C4_OFFSET
bool "Support a fourth I2C controller"
config SYS_FSL_I2C4_OFFSET
hex "Offset from the IMMR of the address of the fourth I2C controller"
depends on SYS_FSL_HAS_I2C4_OFFSET
endif
dm: i2c: Add driver for Cadence I2C IP This is a possible drop in replacement for drivers/i2c/zynq-i2c.c Since this is cadence IP it has been renamed to cdns-i2c, to make sense with the compatible string. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-28 17:47:11 +00:00
config SYS_I2C_CADENCE
tristate "Cadence I2C Controller"
xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-08-06 13:18:36 +00:00
depends on DM_I2C
dm: i2c: Add driver for Cadence I2C IP This is a possible drop in replacement for drivers/i2c/zynq-i2c.c Since this is cadence IP it has been renamed to cdns-i2c, to make sense with the compatible string. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-28 17:47:11 +00:00
help
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
i2c: i2c-cortina: added CAxxxx I2C support Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> hs: fixed build error, add include log.h
2020-06-01 19:56:31 +00:00
config SYS_I2C_CA
tristate "Cortina-Access I2C Controller"
depends on DM_I2C && CORTINA_PLATFORM
help
Add support for the Cortina Access I2C host controller.
Say yes here to select Cortina-Access I2C Host Controller.
Convert CONFIG_SYS_I2C_DAVINCI to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10 10:05:22 +00:00
config SYS_I2C_DAVINCI
bool "Davinci I2C Controller"
depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
help
Say yes here to add support for Davinci and Keystone I2C controller
i2c: Add entry for Designware I2C driver in Kconfig This patch adds an entry for the Designware I2C driver in Kconfig. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-04-28 07:47:17 +00:00
config SYS_I2C_DW
bool "Designware I2C Controller"
help
Say yes here to select the Designware I2C Host Controller. This
controller is used in various SoCs, e.g. the ST SPEAr, Altera
SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs.
aspeed: Add I2C Driver Add Device Model based I2C driver for ast2500/ast2400 SoCs. The driver is very limited, it only supports master mode and synchronous byte-by-byte reads/writes, no DMA or Pool Buffers. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2017-04-17 19:00:30 +00:00
config SYS_I2C_ASPEED
bool "Aspeed I2C Controller"
depends on DM_I2C && ARCH_ASPEED
help
Say yes here to select Aspeed I2C Host Controller. The driver
supports AST2500 and AST2400 controllers, but is very limited.
Only single master mode is supported and only byte-by-byte
synchronous reads and writes are supported, no Pool Buffers or DMA.
x86: i2c: Add a stub driver for Intel I2C/SMbus This is used on most Intel platforms. We don't have a driver for it yet, but add a stub to handle the init. For now this targets ivybridge so we may want to add a device tree binding and generalise it when other platforms are supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-17 23:11:44 +00:00
config SYS_I2C_INTEL
bool "Intel I2C/SMBUS driver"
depends on DM_I2C
help
Add support for the Intel SMBUS driver. So far this driver is just
a stub which perhaps some basic init. There is no implementation of
the I2C API meaning that any I2C operations will immediately fail
for now.
i2c: lpi2c: add lpi2c driver for i.MX7ULP Add lpi2c driver for i.MX7ULP. Need to enable the two options to use this driver: CONFIG_DM_I2C=y CONFIG_SYS_I2C_IMX_LPI2C=y Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-02-24 01:54:18 +00:00
config SYS_I2C_IMX_LPI2C
bool "NXP i.MX LPI2C driver"
help
Add support for the NXP i.MX LPI2C driver.
Kconfig: convert CONFIG_SYS_I2C_LPC32XX Convert the CONFIG_SYS_I2C_LPC32XX configuration symbol from an include directive to a Kconfig value. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-11 02:37:08 +00:00
config SYS_I2C_LPC32XX
bool "LPC32XX I2C driver"
depends on ARCH_LPC32XX
help
Enable support for the LPC32xx I2C driver.
i2c: add Amlogic Meson driver Add a driver for the I2C controller available on Amlogic Meson SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2017-10-29 09:09:00 +00:00
config SYS_I2C_MESON
bool "Amlogic Meson I2C driver"
depends on DM_I2C && ARCH_MESON
help
i2c: meson: improve Kconfig description Expand the Kconfig description with hardware features. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-11-26 16:40:54 +00:00
Add support for the I2C controller available in Amlogic Meson
SoCs. The controller supports programmable bus speed including
standard (100kbits/s) and fast (400kbit/s) speed and allows the
software to define a flexible format of the bit streams. It has an
internal buffer holding up to 8 bytes for transfers and supports
both 7-bit and 10-bit addresses.
i2c: add Amlogic Meson driver Add a driver for the I2C controller available on Amlogic Meson SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2017-10-29 09:09:00 +00:00
i2c: Kconfig: Add SYS_I2C_MXC entry Added kconfig for SYS_I2C_MXC driver. Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-05 23:00:57 +00:00
config SYS_I2C_MXC
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
bool "NXP MXC I2C driver"
i2c: Kconfig: Add SYS_I2C_MXC entry Added kconfig for SYS_I2C_MXC driver. Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-05 23:00:57 +00:00
help
i2c: Kconfig: spelling fixes Signed-off-by: Chris Packham <judge.packham@gmail.com>
2019-01-13 09:13:25 +00:00
Add support for the NXP I2C driver. This supports up to four bus
channels and operating on standard mode up to 100 kbits/s and fast
mode up to 400 kbits/s.
i2c: Kconfig: Add SYS_I2C_MXC entry Added kconfig for SYS_I2C_MXC driver. Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-05 23:00:57 +00:00
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
if SYS_I2C_MXC && (SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY)
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
config SYS_I2C_MXC_I2C1
bool "NXP MXC I2C1"
help
Add support for NXP MXC I2C Controller 1.
Required for SoCs which have I2C MXC controller 1 eg LS1088A, LS2080A
config SYS_I2C_MXC_I2C2
bool "NXP MXC I2C2"
help
Add support for NXP MXC I2C Controller 2.
Required for SoCs which have I2C MXC controller 2 eg LS1088A, LS2080A
config SYS_I2C_MXC_I2C3
bool "NXP MXC I2C3"
help
Add support for NXP MXC I2C Controller 3.
Required for SoCs which have I2C MXC controller 3 eg LS1088A, LS2080A
config SYS_I2C_MXC_I2C4
bool "NXP MXC I2C4"
help
Add support for NXP MXC I2C Controller 4.
Required for SoCs which have I2C MXC controller 4 eg LS1088A, LS2080A
drivers: i2c: mxc: Update support to 8 I2C controllers Existing driver supports upto 4 I2C controllers. But some of future NXPs SoCs like lx2160a has eight I2C controllers. Update MXC driver to support upto 8 I2C controllers Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:31 +00:00
config SYS_I2C_MXC_I2C5
bool "NXP MXC I2C5"
help
Add support for NXP MXC I2C Controller 5.
Required for SoCs which have I2C MXC controller 5 eg LX2160A
config SYS_I2C_MXC_I2C6
bool "NXP MXC I2C6"
help
Add support for NXP MXC I2C Controller 6.
Required for SoCs which have I2C MXC controller 6 eg LX2160A
config SYS_I2C_MXC_I2C7
bool "NXP MXC I2C7"
help
Add support for NXP MXC I2C Controller 7.
Required for SoCs which have I2C MXC controller 7 eg LX2160A
config SYS_I2C_MXC_I2C8
bool "NXP MXC I2C8"
help
Add support for NXP MXC I2C Controller 8.
Required for SoCs which have I2C MXC controller 8 eg LX2160A
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
endif
if SYS_I2C_MXC_I2C1
config SYS_MXC_I2C1_SPEED
int "I2C Channel 1 speed"
arm: Remove ls2080a_simu board This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-09 13:03:10 +00:00
default 40000000 if TARGET_LS2080A_EMU
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
default 100000
help
MXC I2C Channel 1 speed
config SYS_MXC_I2C1_SLAVE
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
hex "I2C1 Slave"
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
default 0
help
MXC I2C1 Slave
endif
if SYS_I2C_MXC_I2C2
config SYS_MXC_I2C2_SPEED
int "I2C Channel 2 speed"
arm: Remove ls2080a_simu board This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-09 13:03:10 +00:00
default 40000000 if TARGET_LS2080A_EMU
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
default 100000
help
MXC I2C Channel 2 speed
config SYS_MXC_I2C2_SLAVE
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
hex "I2C2 Slave"
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
default 0
help
MXC I2C2 Slave
endif
if SYS_I2C_MXC_I2C3
config SYS_MXC_I2C3_SPEED
int "I2C Channel 3 speed"
default 100000
help
MXC I2C Channel 3 speed
config SYS_MXC_I2C3_SLAVE
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
hex "I2C3 Slave"
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
default 0
help
MXC I2C3 Slave
endif
if SYS_I2C_MXC_I2C4
config SYS_MXC_I2C4_SPEED
int "I2C Channel 4 speed"
default 100000
help
MXC I2C Channel 4 speed
config SYS_MXC_I2C4_SLAVE
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
hex "I2C4 Slave"
drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:30 +00:00
default 0
help
MXC I2C4 Slave
endif
drivers: i2c: mxc: Update support to 8 I2C controllers Existing driver supports upto 4 I2C controllers. But some of future NXPs SoCs like lx2160a has eight I2C controllers. Update MXC driver to support upto 8 I2C controllers Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:31 +00:00
if SYS_I2C_MXC_I2C5
config SYS_MXC_I2C5_SPEED
int "I2C Channel 5 speed"
default 100000
help
MXC I2C Channel 5 speed
config SYS_MXC_I2C5_SLAVE
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
hex "I2C5 Slave"
drivers: i2c: mxc: Update support to 8 I2C controllers Existing driver supports upto 4 I2C controllers. But some of future NXPs SoCs like lx2160a has eight I2C controllers. Update MXC driver to support upto 8 I2C controllers Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:31 +00:00
default 0
help
MXC I2C5 Slave
endif
if SYS_I2C_MXC_I2C6
config SYS_MXC_I2C6_SPEED
int "I2C Channel 6 speed"
default 100000
help
MXC I2C Channel 6 speed
config SYS_MXC_I2C6_SLAVE
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
hex "I2C6 Slave"
drivers: i2c: mxc: Update support to 8 I2C controllers Existing driver supports upto 4 I2C controllers. But some of future NXPs SoCs like lx2160a has eight I2C controllers. Update MXC driver to support upto 8 I2C controllers Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:31 +00:00
default 0
help
MXC I2C6 Slave
endif
if SYS_I2C_MXC_I2C7
config SYS_MXC_I2C7_SPEED
int "I2C Channel 7 speed"
default 100000
help
MXC I2C Channel 7 speed
config SYS_MXC_I2C7_SLAVE
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
hex "I2C7 Slave"
drivers: i2c: mxc: Update support to 8 I2C controllers Existing driver supports upto 4 I2C controllers. But some of future NXPs SoCs like lx2160a has eight I2C controllers. Update MXC driver to support upto 8 I2C controllers Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:31 +00:00
default 0
help
MXC I2C7 Slave
endif
if SYS_I2C_MXC_I2C8
config SYS_MXC_I2C8_SPEED
int "I2C Channel 8 speed"
default 100000
help
MXC I2C Channel 8 speed
config SYS_MXC_I2C8_SLAVE
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
hex "I2C8 Slave"
drivers: i2c: mxc: Update support to 8 I2C controllers Existing driver supports upto 4 I2C controllers. But some of future NXPs SoCs like lx2160a has eight I2C controllers. Update MXC driver to support upto 8 I2C controllers Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-06 05:56:31 +00:00
default 0
help
MXC I2C8 Slave
endif
i2c: add nexell driver Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice". - several Bugfixes in nx_i2c.c. - the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working. - "probe_chip" added. - pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-10 17:07:28 +00:00
config SYS_I2C_NEXELL
bool "Nexell I2C driver"
depends on DM_I2C
help
Add support for the Nexell I2C driver. This is used with various
Nexell parts such as S5Pxx18 series SoCs. All chips
have several I2C ports and all are provided, controlled by the
device tree.
i2c: ocores: add i2c driver for OpenCores I2C controller Add support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview). This driver implementation is inspired from the Linux OpenCores I2C driver available. Thanks to Peter Korsgaard <peter@korsgaard.com> for writing Linux OpenCores I2C driver. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-14 09:12:34 +00:00
config SYS_I2C_OCORES
bool "ocores I2C driver"
depends on DM_I2C
help
Add support for ocores I2C controller. For details see
https://opencores.org/projects/i2c
Convert CONFIG_SYS_I2C_OMAP24XX to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_OMAP24XX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-08-07 18:11:34 +00:00
config SYS_I2C_OMAP24XX
bool "TI OMAP2+ I2C driver"
i2c: omap24xx_i2c: Adapt driver to support K3 devices K3 devices have I2C IP that is same as OMAP2+ family. Allow driver to be compiled for ARCH_K3. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-04 23:08:11 +00:00
depends on ARCH_OMAP2PLUS || ARCH_K3
Convert CONFIG_SYS_I2C_OMAP24XX to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_OMAP24XX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-08-07 18:11:34 +00:00
help
Add support for the OMAP2+ I2C driver.
i2c: rcar_i2c: Add DM and DT capable I2C driver Add derivative of the rcar_i2c driver which is capable of probing itself from DM and uses DT. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-21 16:57:28 +00:00
config SYS_I2C_RCAR_I2C
bool "Renesas RCar I2C driver"
depends on (RCAR_GEN3 || RCAR_GEN2) && DM_I2C
help
Support for Renesas RCar I2C controller.
i2c: rcar_iic: Add RCar IIC driver Add driver for the RCar IIC or DVFS I2C controller. This driver is based on the SH I2C driver, but supports DM and DT probing as well as modern I2C framework API. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-28 07:02:27 +00:00
config SYS_I2C_RCAR_IIC
bool "Renesas RCar Gen3 IIC driver"
i2c: rcar_iic: Allow IIC on RCar Gen2 The IIC on Gen2 is compatible with this driver as well, allow it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-17 01:17:40 +00:00
depends on (RCAR_GEN3 || RCAR_GEN2) && DM_I2C
i2c: rcar_iic: Add RCar IIC driver Add driver for the RCar IIC or DVFS I2C controller. This driver is based on the SH I2C driver, but supports DM and DT probing as well as modern I2C framework API. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-28 07:02:27 +00:00
help
Support for Renesas RCar Gen3 IIC controller.
rockchip: Add I2C driver Add an I2C driver for the Rockchip RK3288, using driver model. It should work for other Rockchip SoCs also. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-30 22:55:39 +00:00
config SYS_I2C_ROCKCHIP
bool "Rockchip I2C driver"
depends on DM_I2C
help
Add support for the Rockchip I2C driver. This is used with various
Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips
i2c: Kconfig: spelling fixes Signed-off-by: Chris Packham <judge.packham@gmail.com>
2019-01-13 09:13:25 +00:00
have several I2C ports and all are provided, controlled by the
rockchip: Add I2C driver Add an I2C driver for the Rockchip RK3288, using driver model. It should work for other Rockchip SoCs also. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-30 22:55:39 +00:00
device tree.
sandbox: Move CONFIG_SYS_I2C_SANDBOX to Kconfig Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher<hs@denx.de>
2015-03-06 20:19:04 +00:00
config SYS_I2C_SANDBOX
bool "Sandbox I2C driver"
depends on SANDBOX && DM_I2C
help
Enable I2C support for sandbox. This is an emulation of a real I2C
bus. Devices can be attached to the bus using the device tree
i2c: sandbox: remove code snippet from Kconfig help With the Kconfig re-sync with Linux 4.10, characters such as '}', ';' in Kconfig help message cause warnings: $ make defconfig *** Default configuration is based on 'sandbox_defconfig' drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}' drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';' Drop the Device Tree fragment from the help. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 03:39:55 +00:00
which specifies the driver to use. See sandbox.dts as an example.
sandbox: Move CONFIG_SYS_I2C_SANDBOX to Kconfig Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher<hs@denx.de>
2015-03-06 20:19:04 +00:00
rcar: i2c: Migrate SYS_I2C_SH to Kconfig - Migrate SYS_I2C_SH and related defines to Kconfig - Remove currently unused SYS_I2C_SH related defines - Cleanup related README section. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:34 +00:00
config SYS_I2C_SH
bool "Legacy SuperH I2C interface"
depends on ARCH_RMOBILE && SYS_I2C_LEGACY
help
Enable the legacy SuperH I2C interface.
if SYS_I2C_SH
config SYS_I2C_SH_NUM_CONTROLLERS
int
default 5
config SYS_I2C_SH_BASE0
hex
default 0xE6820000
config SYS_I2C_SH_BASE1
hex
default 0xE6822000
config SYS_I2C_SH_BASE2
hex
default 0xE6824000
config SYS_I2C_SH_BASE3
hex
default 0xE6826000
config SYS_I2C_SH_BASE4
hex
default 0xE6828000
config SH_I2C_8BIT
bool
default y
config SH_I2C_DATA_HIGH
int
default 4
config SH_I2C_DATA_LOW
int
default 5
config SH_I2C_CLOCK
int
default 104000000
endif
Convert CONFIG_SYS_I2C_SOFT et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_SOFT CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SOFT_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-17 21:59:46 +00:00
config SYS_I2C_SOFT
bool "Legacy software I2C interface"
help
Enable the legacy software defined I2C interface
config SYS_I2C_SOFT_SPEED
int "Software I2C bus speed"
depends on SYS_I2C_SOFT
default 100000
help
Speed of the software I2C bus
config SYS_I2C_SOFT_SLAVE
hex "Software I2C slave address"
depends on SYS_I2C_SOFT
default 0xfe
help
Slave address of the software I2C bus
i2c: octeon_i2c: Add I2C controller driver for Octeon Add support for I2C controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-05-26 12:13:07 +00:00
config SYS_I2C_OCTEON
bool "Octeon II/III/TX/TX2 I2C driver"
depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) && DM_I2C
default y
help
Add support for the Marvell Octeon I2C driver. This is used with
various Octeon parts such as Octeon II/III and OcteonTX/TX2. All
chips have several I2C ports and all are provided, controlled by
the device tree.
i2c: Kconfig: Add SYS_I2C_S3C24X0 entry Adding Kconfig for SYS_I2C_S3C24X0. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-01-09 05:47:52 +00:00
config SYS_I2C_S3C24X0
bool "Samsung I2C driver"
i2c: S3C24X0: Finish Kconfig migration Finish moving this driver to Kconfig. - Update the dependency logic for Exynos5 too - Remove the unused CONFIG_SYS_I2C_S3C24X0_SPEED variable - Drop CONFIG_SYS_I2C_S3C24X0_SLAVE as it's always set to 0. - Move the internal SYS_I2C_S3C24X0_SLAVE define closer to the only user. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-17 21:59:42 +00:00
depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && DM_I2C
i2c: Kconfig: Add SYS_I2C_S3C24X0 entry Adding Kconfig for SYS_I2C_S3C24X0. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-01-09 05:47:52 +00:00
help
Support for Samsung I2C controller as Samsung SoCs.
sandbox: Move CONFIG_SYS_I2C_SANDBOX to Kconfig Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher<hs@denx.de>
2015-03-06 20:19:04 +00:00
i2c: add i2c driver for stm32 Add i2c driver which can be used on both STM32F7 and STM32H7. This I2C block supports the following features: _ Slave and master modes _ Multimaster capability _ Standard-mode (up to 100 kHz) _ Fast-mode (up to 400 kHz) _ Fast-mode Plus (up to 1 MHz) _ 7-bit and 10-bit addressing mode _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask) _ All 7-bit addresses acknowledge mode _ General call _ Programmable setup and hold times _ Easy to use event management _ Optional clock stretching _ Software reset Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-09 12:45:27 +00:00
config SYS_I2C_STM32F7
bool "STMicroelectronics STM32F7 I2C support"
arm: stm32: add new architecture for STM32MP family - add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:10 +00:00
depends on (STM32F7 || STM32H7 || ARCH_STM32MP) && DM_I2C
i2c: add i2c driver for stm32 Add i2c driver which can be used on both STM32F7 and STM32H7. This I2C block supports the following features: _ Slave and master modes _ Multimaster capability _ Standard-mode (up to 100 kHz) _ Fast-mode (up to 400 kHz) _ Fast-mode Plus (up to 1 MHz) _ 7-bit and 10-bit addressing mode _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask) _ All 7-bit addresses acknowledge mode _ General call _ Programmable setup and hold times _ Easy to use event management _ Optional clock stretching _ Software reset Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-09 12:45:27 +00:00
help
Enable this option to add support for STM32 I2C controller
introduced with STM32F7/H7 SoCs. This I2C controller supports :
_ Slave and master modes
_ Multimaster capability
_ Standard-mode (up to 100 kHz)
_ Fast-mode (up to 400 kHz)
_ Fast-mode Plus (up to 1 MHz)
_ 7-bit and 10-bit addressing mode
_ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
_ All 7-bit addresses acknowledge mode
_ General call
_ Programmable setup and hold times
_ Easy to use event management
_ Optional clock stretching
_ Software reset
i2c: Add a DM_I2C driver for the sun6i P2WI controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the p2wi functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants. Move that to the common header, so it can be used by both interface implementations. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08 05:17:20 +00:00
config SYS_I2C_SUN6I_P2WI
bool "Allwinner sun6i P2WI controller"
depends on ARCH_SUNXI
help
Support for the P2WI (Push/Pull 2 Wire Interface) controller embedded
in the Allwinner A31 and A31s SOCs. This interface is used to connect
to specific devices like the X-Powers AXP221 PMIC.
i2c: Add a DM_I2C driver for the sun8i RSB controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the rsb functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants, so move that to the common header. There are only a couple of pairs of hardware/runtime addresses used across all PMIC variants. So far the code expected only the "primary" pair, but some PMICs like the AXP305 and AXP805 use the secondary pair, so add support for that to the DM driver as well. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08 05:17:21 +00:00
config SYS_I2C_SUN8I_RSB
bool "Allwinner sun8i Reduced Serial Bus controller"
depends on ARCH_SUNXI
help
Support for Allwinner's Reduced Serial Bus (RSB) controller. This
controller is responsible for communicating with various RSB based
devices, such as X-Powers AXPxxx PMICs and AC100/AC200 CODEC ICs.
i2c: synquacer: SNI Synquacer I2C controller Add driver for class of I2C controllers found on Socionext Synquacer platform. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-04 09:44:48 +00:00
config SYS_I2C_SYNQUACER
bool "Socionext SynQuacer I2C controller"
depends on ARCH_SYNQUACER && DM_I2C
help
Support for Socionext Synquacer I2C controller. This I2C controller
will be used for RTC and LS-connector on DeveloperBox.
Kconfig: tegra: Migrate SYS_I2C_TEGRA Migrate SYS_I2C_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20 12:17:26 +00:00
config SYS_I2C_TEGRA
bool "NVIDIA Tegra internal I2C controller"
rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-06 12:02:41 +00:00
depends on ARCH_TEGRA
Kconfig: tegra: Migrate SYS_I2C_TEGRA Migrate SYS_I2C_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20 12:17:26 +00:00
help
Support for NVIDIA I2C controller available in Tegra SoCs.
i2c: UniPhier: add driver for UniPhier i2c controller This commit adds on-chip I2C driver used on some old Panasonic UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-01-13 03:44:36 +00:00
config SYS_I2C_UNIPHIER
bool "UniPhier I2C driver"
depends on ARCH_UNIPHIER && DM_I2C
default y
help
ARM: UniPhier: update the vendor name of UniPhier in Kconfig The business for UniPhier Soc family has been transferred from Panasonic Corporation to Socionext Inc. Update the SoC select menu in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-29 08:30:01 +00:00
Support for UniPhier I2C controller driver. This I2C controller
is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller This commit adds on-chip I2C driver used on newer SoCs of Panasonic UniPhier platform. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-01-13 03:44:37 +00:00
config SYS_I2C_UNIPHIER_F
bool "UniPhier FIFO-builtin I2C driver"
depends on ARCH_UNIPHIER && DM_I2C
default y
help
ARM: UniPhier: update the vendor name of UniPhier in Kconfig The business for UniPhier Soc family has been transferred from Panasonic Corporation to Socionext Inc. Update the SoC select menu in Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-29 08:30:01 +00:00
Support for UniPhier FIFO-builtin I2C controller driver.
i2c: UniPhier: add driver for UniPhier FIFO-builtin i2c controller This commit adds on-chip I2C driver used on newer SoCs of Panasonic UniPhier platform. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-01-13 03:44:37 +00:00
This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
dm: i2c: Add support for multiplexed I2C buses Add a new I2C_MUX uclass. Devices in this class can multiplex between several I2C buses, selecting them one at a time for use by the system. The multiplexing mechanism is left to the driver to decide - it may be controlled by GPIOs, for example. The uclass supports only two methods: select() and deselect(). The current mux state is expected to be stored in the mux itself since it is the only thing that knows how to make things work. The mux can record the current state and then avoid switching unless it is necessary. So select() can be skipped if the mux is already in the correct state. Also deselect() can be made a nop if required. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-03 14:19:21 +00:00
i2c: fix: Add support for the Arm's Versatile Express I2C controller accidentially while fixing merge errors for patch: https://lists.denx.de/pipermail/u-boot/2018-September/342278.html missed to add files: MAINTAINERS drivers/i2c/Kconfig drivers/i2c/Makefile add them with this patch. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-10-11 05:26:33 +00:00
config SYS_I2C_VERSATILE
bool "Arm Ltd Versatile I2C bus driver"
arm: Remove vexpress_ca15_tc2 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-21 01:05:47 +00:00
depends on DM_I2C && TARGET_VEXPRESS64_JUNO
i2c: fix: Add support for the Arm's Versatile Express I2C controller accidentially while fixing merge errors for patch: https://lists.denx.de/pipermail/u-boot/2018-September/342278.html missed to add files: MAINTAINERS drivers/i2c/Kconfig drivers/i2c/Makefile add them with this patch. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-10-11 05:26:33 +00:00
help
Add support for the Arm Ltd Versatile Express I2C driver. The I2C host
controller is present in the development boards manufactured by Arm Ltd.
i2c: mvtwsi: Add compatibility to DM This patch adds the necessary functions and Kconfig entry to make the MVTWSI I2C driver compatible with the driver model. A possible device tree entry might look like this: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; clock-frequency = <100000>; u-boot,i2c-slave-addr = <0x0>; }; Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-21 09:57:10 +00:00
config SYS_I2C_MVTWSI
bool "Marvell I2C driver"
help
Support for Marvell I2C controllers as used on the orion5x and
kirkwood SoC families.
i2c: add Tegra186 BPMP driver On Tegra186, some I2C controllers are directly controlled by the main CPU, whereas others are controlled by the BPMP, and can only be accessed by the main CPU via IPC requests to the BPMP. This driver covers the latter case. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-08 17:28:27 +00:00
config TEGRA186_BPMP_I2C
bool "Enable Tegra186 BPMP-based I2C driver"
depends on TEGRA186_BPMP
help
Support for Tegra I2C controllers managed by the BPMP (Boot and
Power Management Processor). On Tegra186, some I2C controllers are
directly controlled by the main CPU, whereas others are controlled
by the BPMP, and can only be accessed by the main CPU via IPC
requests to the BPMP. This driver covers the latter case.
Convert CONFIG_SYS_I2C_SPEED et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:32 +00:00
config SYS_I2C_SLAVE
hex "I2C Slave address channel (all buses)"
depends on SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY || TPL_SYS_I2C_LEGACY
default 0xfe
help
I2C Slave address channel 0 for all buses in the legacy drivers.
Many boards/controllers/drivers don't support an I2C slave
interface so provide a default slave address for them for use in
common code. A real value for CONFIG_SYS_I2C_SLAVE should be
defined for any board which does support a slave interface and
this default used otherwise.
config SYS_I2C_SPEED
int "I2C Slave channel 0 speed (all buses)"
depends on SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY || TPL_SYS_I2C_LEGACY
default 100000
help
I2C Slave speed channel 0 for all buses in the legacy drivers.
Convert CONFIG_SYS_I2C_BUS_MAX to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_BUS_MAX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Fix AM43XX drop AM44XX] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-11 11:39:34 +00:00
config SYS_I2C_BUS_MAX
int "Max I2C busses"
depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_SOCFPGA
default 2 if TI816X
default 3 if OMAP34XX || AM33XX || AM43XX || ARCH_KEYSTONE
default 4 if ARCH_SOCFPGA || OMAP44XX || TI814X
default 5 if OMAP54XX
help
Define the maximum number of available I2C buses.
i2c: xiic: Add Xilinx AXI I2C driver Add Xilinx AXI I2C controller driver based on the Linux i2c-xiic driver. This driver is stripped of all the IRQ handling and uses pure polling, yet tries to retain most of the structure of the Linux driver to make backporting of fixes easy. Note that the IP has a known limitation on 255 bytes read and write, according to xilinx this is still being worked on [1]. [1] https://forums.xilinx.com/t5/Embedded-Processor-System-Design/AXI-IIC-V2-0-I2C-Master-Reading-multiple-bytes-from-I2C-slave/m-p/854419/highlight/true#M39387 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-12-19 11:26:27 +00:00
config SYS_I2C_XILINX_XIIC
bool "Xilinx AXI I2C driver"
depends on DM_I2C
help
Support for Xilinx AXI I2C controller.
i2c: ihs_i2c: Make DM compatible Make the ihs_i2c driver DM-compatible; for legacy boards, the old functions are retained within #ifdefs. No board uses the new DM driver yet; this patch only lays the foundation for future support. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-15 10:08:11 +00:00
config SYS_I2C_IHS
bool "gdsys IHS I2C driver"
depends on DM_I2C
help
Support for gdsys IHS I2C driver on FPGA bus.
dm: i2c: Add support for multiplexed I2C buses Add a new I2C_MUX uclass. Devices in this class can multiplex between several I2C buses, selecting them one at a time for use by the system. The multiplexing mechanism is left to the driver to decide - it may be controlled by GPIOs, for example. The uclass supports only two methods: select() and deselect(). The current mux state is expected to be stored in the mux itself since it is the only thing that knows how to make things work. The mux can record the current state and then avoid switching unless it is necessary. So select() can be skipped if the mux is already in the correct state. Also deselect() can be made a nop if required. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-03 14:19:21 +00:00
source "drivers/i2c/muxes/Kconfig"
drivers: hierarchize drivers Kconfig menu The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-25 17:46:26 +00:00
i2c: Create a new Kconfig for I2C At present we have CONFIG_SPL_I2C but not CONFIG_I2C. The reason CONFIG_I2C is not strictly necessary is that: a) We have CONFIG_SYS_I2C_LEGACY and CONFIG_DM_I2C for the two possible i2c stacks b) In U-Boot proper, we always build drivers/i2c/ regardless of the options Still, it is better to have CONFIG_I2C - it makes U-Boot proper similar to SPL/TPL, so we can (in a future commit) simplify the Makefile rules. Enable it by default, since as above, we have separate options (SYS_I2C_LEGACY and DM_I2C) to control whether it is 'really' enabled. Once we have migrated I2C to driver model, we can drop SYS_I2C_LEGACY and make DM_I2C become I2C. For now, this lets us simplify the Makefile rules. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:35 +00:00
endif
Reference in a new issue Copy permalink