u-boot/board/sunxi/MAINTAINERS

456 lines
11 KiB
Text
Raw Normal View History

SUNXI BOARD
M: Hans de Goede <hdegoede@redhat.com>
S: Maintained
F: board/sunxi/
F: include/configs/sun4i.h
F: configs/A10-OLinuXino-Lime_defconfig
F: configs/ba10_tv_box_defconfig
F: configs/Chuwi_V7_CW0825_defconfig
F: configs/Cubieboard_defconfig
F: configs/dserve_dsrv9703c_defconfig
F: configs/Hyundai_A7HD_defconfig
F: configs/inet1_defconfig
F: configs/inet97fv2_defconfig
F: configs/inet9f_rev03_defconfig
F: configs/jesurun_q5_defconfig
F: configs/Mele_A1000_defconfig
F: configs/Mele_M3_defconfig
F: configs/Mini-X_defconfig
F: configs/mk802_defconfig
F: configs/mk802ii_defconfig
F: configs/pov_protab2_ips9_defconfig
F: include/configs/sun5i.h
F: configs/A10s-OLinuXino-M_defconfig
F: configs/A13-OLinuXino_defconfig
F: configs/A13-OLinuXinoM_defconfig
F: configs/Auxtek-T003_defconfig
F: configs/Auxtek-T004_defconfig
F: configs/CHIP_defconfig
F: configs/CHIP_pro_defconfig
F: configs/difrnce_dit4350_defconfig
F: configs/Empire_electronix_d709_defconfig
F: configs/Empire_electronix_m712_defconfig
F: configs/inet98v_rev2_defconfig
F: configs/mk802_a10s_defconfig
F: configs/q8_a13_tablet_defconfig
F: configs/r7-tv-dongle_defconfig
F: configs/UTOO_P66_defconfig
F: configs/Wobo_i5_defconfig
F: include/configs/sun6i.h
F: configs/colorfly_e708_q1_defconfig
F: configs/CSQ_CS908_defconfig
F: configs/inet_q972_defconfig
F: configs/Mele_A1000G_quad_defconfig
F: configs/Mele_M9_defconfig
F: configs/Sinovoip_BPI_M2_defconfig
F: include/configs/sun7i.h
F: configs/A20-OLinuXino_MICRO_defconfig
F: configs/A20-OLinuXino_MICRO-eMMC_defconfig
F: configs/Bananapi_defconfig
F: configs/Bananapro_defconfig
F: configs/i12-tvbox_defconfig
F: configs/Linksprite_pcDuino3_defconfig
F: configs/Linksprite_pcDuino3_fdt_defconfig
F: configs/Orangepi_defconfig
F: configs/Orangepi_mini_defconfig
F: configs/qt840a_defconfig
F: configs/Wits_Pro_A20_DKT_defconfig
F: include/configs/sun8i.h
F: configs/sun8i_a23_evb_defconfig
F: configs/ga10h_v1_1_defconfig
F: configs/gt90h_v4_defconfig
F: configs/inet86dz_defconfig
F: configs/orangepi_2_defconfig
F: configs/orangepi_lite_defconfig
F: configs/orangepi_one_defconfig
F: configs/orangepi_pc_defconfig
F: configs/orangepi_pc_plus_defconfig
F: configs/orangepi_plus_defconfig
F: configs/orangepi_plus2e_defconfig
F: configs/polaroid_mid2407pxe03_defconfig
F: configs/polaroid_mid2809pxe04_defconfig
F: configs/q8_a23_tablet_800x480_defconfig
F: configs/q8_a33_tablet_800x480_defconfig
F: configs/q8_a33_tablet_1024x600_defconfig
F: include/configs/sun9i.h
F: configs/Merrii_A80_Optimus_defconfig
F: include/configs/sun50i.h
A20-OLIMEX-SOM-EVB BOARD
M: Marcus Cooper <codekipper@gmail.com>
S: Maintained
F: configs/A20-Olimex-SOM-EVB_defconfig
A20-OLINUXINO-LIME BOARD
M: FUKAUMI Naoki <naobsd@gmail.com>
S: Maintained
F: configs/A20-OLinuXino-Lime_defconfig
A20-OLINUXINO-LIME2 BOARD
M: Iain Paton <ipaton0@gmail.com>
S: Maintained
F: configs/A20-OLinuXino-Lime2_defconfig
A20-OLINUXINO-LIME2-EMMC BOARD
M: Olliver Schinagl <oliver@schinagl.nl>
S: Maintained
F: configs/A20-OLinuXino-Lime2-eMMC_defconfig
A33-OLINUXINO BOARD
M: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
S: Maintained
F: configs/A33-OLinuXino_defconfig
A64-OLINUXINO BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/a64-olinuxino_defconfig
A80 OPTIMUS BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Merrii_A80_Optimus_defconfig
AINOL AW1 BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
F: configs/Ainol_AW1_defconfig
AMARULA A64-RELIC
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/amarula_a64_relic_defconfig
F: arch/arm/dts/sun50i-a64-amarula-relic.dts
AMPE A76 BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
F: configs/Ampe_A76_defconfig
BANANAPI M1 PLUS
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/bananapi_m1_plus_defconfig
BANANAPI M2 BERRY
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/bananapi_m2_berry_defconfig
BANANAPI M2 ULTRA BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Bananapi_M2_Ultra_defconfig
F: arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
BANANAPI M2 MAGIC BOARD
M: Maxime Ripard <maxime.ripard@bootlin.com>
S: Maintained
F: configs/Bananapi_m2m_defconfig
F: arch/arm/dts/sun8i-r16-bananapi-m2m.dts
BANANAPI M2 ZERO BOARD
M: Icenowy Zheng <icenowy@aosc.io>
S: Maintained
F: configs/bananapi_m2_zero_defconfig
BANANAPI M64
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/bananapi_m64_defconfig
COLOMBUS BOARD
M: Maxime Ripard <maxime.ripard@bootlin.com>
S: Maintained
F: configs/Colombus_defconfig
CUBIEBOARD2 BOARD
M: Ian Campbell <ijc@hellion.org.uk>
M: Hans de Goede <hdegoede@redhat.com>
S: Maintained
F: include/configs/sun7i.h
F: configs/Cubieboard2_defconfig
F: configs/Cubietruck_defconfig
CUBIEBOARD4 BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Cubieboard4_defconfig
CUBIETRUCK-PLUS BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Cubietruck_plus_defconfig
GEMEI-G9 TABLET
M: Priit Laes <plaes@plaes.org>
S: Maintained
F: configs/sunxi_Gemei_G9_defconfig
H8HOMLET PROTO A83T BOARD
M: VishnuPatekar <vishnupatekar0510@gmail.com>
S: Maintained
F: configs/h8_homlet_v2_defconfig
HUMMINGBIRD-A31 BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Hummingbird_A31_defconfig
ICnova-A20-SWAC BOARD
M: Stefan Roese <sr@denx.de>
S: Maintained
F: configs/icnova-a20-swac_defconfig
ITEAD IBOX BOARD
M: Marcus Cooper <codekipper@gmail.com>
S: Maintained
F: configs/Itead_Ibox_A20_defconfig
INET 3F BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
F: configs/iNet_3F_defconfig
INET 3W BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
F: configs/iNet_3W_defconfig
INET 86VS BOARD
M: Michal Suchanek <hramrach@gmail.com>
S: Maintained
F: configs/iNet_86VS_defconfig
INET D978 BOARD
M: Icenowy Zheng <icenowy@aosc.xyz>
S: Maintained
F: configs/iNet_D978_rev2_defconfig
LAMOBO-R1 BOARD
M: Jelle de Jong <jelledejong@powercraft.nl>
S: Maintained
F: configs/Lamobo_R1_defconfig
LICHEEPI-ZERO BOARD
M: Icenowy Zheng <icenowy@aosc.xyz>
S: Maintained
F: configs/LicheePi_Zero_defconfig
LINKSPRITE-PCDUINO BOARD
M: Zoltan Herpai <wigyori@uid0.hu>
S: Maintained
F: configs/Linksprite_pcDuino_defconfig
LINKSPRITE-PCDUINO3-NANO BOARD
M: Adam Sampson <ats@offog.org>
S: Maintained
F: configs/Linksprite_pcDuino3_Nano_defconfig
MARSBOARD-A10 BOARD
M: Aleksei Mamlin <mamlinav@gmail.com>
S: Maintained
F: configs/Marsboard_A10_defconfig
MELE I7 BOARD
M: Marcus Cooper <codekipper@gmail.com>
S: Maintained
F: configs/Mele_I7_defconfig
MELE M5 BOARD
M: Ian Campbell <ijc@hellion.org.uk>
S: Maintained
F: configs/Mele_M5_defconfig
MIXTILE-LOFTQ BOARD
M: Phil Han <pengphei@sina.com>
S: Maintained
F: configs/mixtile_loftq_defconfig
MK808C BOARD
M: Marcus Cooper <codekipper@gmail.com>
S: Maintained
F: configs/MK808C_defconfig
MSI-PRIMO73 BOARD
M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
S: Maintained
F: configs/MSI_Primo73_defconfig
MSI-PRIMO81 BOARD
M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
S: Maintained
F: configs/MSI_Primo81_defconfig
LIBRETECH ALL-H3-CC BOARDS
sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver. The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H3 SoC. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. Raspberry Pi B+ like peripherals supported on this board include: - Power input through micro-USB connector (without USB OTG) - Native 100 Mbps ethernet using the internal PHY, as opposed to USB-based on the RPi - 4x USB 2.0 host ports, directly connected to the SoC, as opposed to being connected through a USB 2.0 hub on the RPi - TV and audio output on a 3.5mm TRRS jack - HDMI output - Micro-SD card slot - Standard RPi B+ GPIO header, with the standard peripherals routed to the same pins. * 5V, 3.3V power, and ground * I2C0 on the H3 is routed to I2C1 pins on the RPi header * I2C1 on the H3 is routed to I2C0 pins on the RPi header * UART1 on the H3 is routed to UART0 pins on the RPi header * SPI0 on the H3 is routed to SPI0 pins on the RPi header, with GPIO pin PA17 replacing the missing Chip Select 1 * I2S1 on the H3 is routed to PCM pins on the RPi header - Additional peripherals from the H3 are available on different pins. These include I2S0, JTAG, PWM1, SPDIF, SPI1, and UART3 In addition, there are a number of new features: - Console UART header - Consumer IR receiver - Camera interface (not compatible with RPi) - Onboard microphone - eMMC expansion module port - Heatsink mounting holes This patch adds defconfig and dts files for this board. The dts file is the same as the one submitted for inclusion in Linux, with some minor revisions to match the dtsi file and old EMAC bindings in U-boot. Since the OTG controller is wired to a USB host port, and the H3 has proper USB hosts to handle host mode, the MUSB driver is not enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2017-12-07 13:00:45 +00:00
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/libretech_all_h3_cc_h2_plus_defconfig
sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver. The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H3 SoC. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. Raspberry Pi B+ like peripherals supported on this board include: - Power input through micro-USB connector (without USB OTG) - Native 100 Mbps ethernet using the internal PHY, as opposed to USB-based on the RPi - 4x USB 2.0 host ports, directly connected to the SoC, as opposed to being connected through a USB 2.0 hub on the RPi - TV and audio output on a 3.5mm TRRS jack - HDMI output - Micro-SD card slot - Standard RPi B+ GPIO header, with the standard peripherals routed to the same pins. * 5V, 3.3V power, and ground * I2C0 on the H3 is routed to I2C1 pins on the RPi header * I2C1 on the H3 is routed to I2C0 pins on the RPi header * UART1 on the H3 is routed to UART0 pins on the RPi header * SPI0 on the H3 is routed to SPI0 pins on the RPi header, with GPIO pin PA17 replacing the missing Chip Select 1 * I2S1 on the H3 is routed to PCM pins on the RPi header - Additional peripherals from the H3 are available on different pins. These include I2S0, JTAG, PWM1, SPDIF, SPI1, and UART3 In addition, there are a number of new features: - Console UART header - Consumer IR receiver - Camera interface (not compatible with RPi) - Onboard microphone - eMMC expansion module port - Heatsink mounting holes This patch adds defconfig and dts files for this board. The dts file is the same as the one submitted for inclusion in Linux, with some minor revisions to match the dtsi file and old EMAC bindings in U-boot. Since the OTG controller is wired to a USB host port, and the H3 has proper USB hosts to handle host mode, the MUSB driver is not enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2017-12-07 13:00:45 +00:00
F: configs/libretech_all_h3_cc_h3_defconfig
F: configs/libretech_all_h3_cc_h5_defconfig
sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver. The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H3 SoC. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. Raspberry Pi B+ like peripherals supported on this board include: - Power input through micro-USB connector (without USB OTG) - Native 100 Mbps ethernet using the internal PHY, as opposed to USB-based on the RPi - 4x USB 2.0 host ports, directly connected to the SoC, as opposed to being connected through a USB 2.0 hub on the RPi - TV and audio output on a 3.5mm TRRS jack - HDMI output - Micro-SD card slot - Standard RPi B+ GPIO header, with the standard peripherals routed to the same pins. * 5V, 3.3V power, and ground * I2C0 on the H3 is routed to I2C1 pins on the RPi header * I2C1 on the H3 is routed to I2C0 pins on the RPi header * UART1 on the H3 is routed to UART0 pins on the RPi header * SPI0 on the H3 is routed to SPI0 pins on the RPi header, with GPIO pin PA17 replacing the missing Chip Select 1 * I2S1 on the H3 is routed to PCM pins on the RPi header - Additional peripherals from the H3 are available on different pins. These include I2S0, JTAG, PWM1, SPDIF, SPI1, and UART3 In addition, there are a number of new features: - Console UART header - Consumer IR receiver - Camera interface (not compatible with RPi) - Onboard microphone - eMMC expansion module port - Heatsink mounting holes This patch adds defconfig and dts files for this board. The dts file is the same as the one submitted for inclusion in Linux, with some minor revisions to match the dtsi file and old EMAC bindings in U-boot. Since the OTG controller is wired to a USB host port, and the H3 has proper USB hosts to handle host mode, the MUSB driver is not enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2017-12-07 13:00:45 +00:00
NANOPI-M1 BOARD
M: Mylène Josserand <mylene.josserand@free-electrons.com>
S: Maintained
F: configs/nanopi_m1_defconfig
NANOPI-M1 PLUS BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/nanopi_m1_plus_defconfig
NANOPI-NEO BOARD
M: Jelle van der Waa <jelle@vdwaa.nl>
S: Maintained
F: configs/nanopi_neo_defconfig
NANOPI-NEO2 BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/nanopi_neo2_defconfig
NANOPI-NEO-PLUS2 BOARD
M: Antony Antony <antony@phenome.org>
S: Maintained
F: configs/nanopi_neo_plus2_defconfig
NANOPI-NEO-AIR BOARD
M: Jelle van der Waa <jelle@vdwaa.nl>
S: Maintained
F: configs/nanopi_neo_air_defconfig
NANOPI-A64 BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/nanopi_a64_defconfig
NINTENDO NES CLASSIC EDITION BOARD
M: FUKAUMI Naoki <naobsd@gmail.com>
S: Maintained
F: configs/Nintendo_NES_Classic_Edition_defconfig
OLIMEX A20-SOM204 BOARD
M: Stefan Mavrodiev <stefan@olimex.com>
S: Maintained
F: configs/A20-Olimex-SOM204-EVB_defconfig
F: configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
ORANGEPI LITE2 BOARD
M: Jagan Teki <jagan@openedev.com>
S: Maintained
F: configs/orangepi_lite2_defconfig
ORANGEPI ONE PLUS BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/orangepi_one_plus_defconfig
ORANGEPI WIN/WIN PLUS BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/orangepi_win_defconfig
ORANGEPI ZERO BOARD
M: Icenowy Zheng <icenowy@aosc.xyz>
S: Maintained
F: configs/orangepi_zero_defconfig
ORANGEPI ZERO PLUS BOARD
M: Hauke Mehrtens <hauke@hauke-m.de>
S: Maintained
F: configs/orangepi_zero_plus_defconfig
ORANGEPI ZERO PLUS 2 BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/orangepi_zero_plus2_defconfig
ORANGEPI PC 2 BOARD
M: Andre Przywara <andre.przywara@arm.com>
S: Maintained
F: configs/orangepi_pc2_defconfig
ORANGEPI PRIME BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/orangepi_prime_defconfig
ORANGEPI R1 BOARD
M: Hauke Mehrtens <hauke@hauke-m.de>
S: Maintained
F: configs/orangepi_r1_defconfig
PINEBOOK BOARD:
M: Vasily Khoruzhick <anarsoul@gmail.com>
S: Maintained
F: configs/pinebook_defconfig
PINE64 BOARDS
M: Andre Przywara <andre.przywara@arm.com>
S: Maintained
F: configs/pine64_plus_defconfig
F: configs/pine64-lts_defconfig
PINE H64 BOARD
M: Icenowy Zheng <icenowy@aosc.io>
S: Maintained
F: configs/pine_h64_defconfig
R16 EVB PARROT BOARD
M: Quentin Schulz <quentin.schulz@free-electrons.com>
S: Maintained
F: configs/parrot_r16_defconfig
SINLINX SINA31s BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Sinlinx_SinA31s_defconfig
W: http://linux-sunxi.org/Sinlinx_SinA31s
SINLINX SINA33 BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Sinlinx_SinA33_defconfig
W: http://linux-sunxi.org/Sinlinx_SinA33
SINOVOIP BPI M2 PLUS H3 BOARD
M: Icenowy Zheng <icenowy@aosc.io>
S: Maintained
F: configs/Sinovoip_BPI_M2_Plus_defconfig
SINOVOIP BPI M3 A83T BOARD
M: VishnuPatekar <vishnupatekar0510@gmail.com>
S: Maintained
F: configs/Sinovoip_BPI_M3_defconfig
SOPINE BOARD
M: Icenowy Zheng <icenowy@aosc.io>
S: Maintained
F: configs/sopine_baseboard_defconfig
SUNCHIP CX-A99 BOARD
M: Rask Ingemann Lambertsen <rask@formelder.dk>
S: Maintained
F: configs/Sunchip_CX-A99_defconfig
W: https://linux-sunxi.org/Sunchip_CX-A99
TBS A711 BOARD
M: Maxime Ripard <maxime.ripard@bootlin.com>
S: Maintained
F: configs/tbs_a711_defconfig
WEXLER-TAB7200 BOARD
M: Aleksei Mamlin <mamlinav@gmail.com>
S: Maintained
F: configs/Wexler_TAB7200_defconfig
YONES TOPTECH BD1078 BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
F: configs/Yones_Toptech_BD1078_defconfig
YONES TOPTECH BS1078 V2 BOARD
M: Peter Korsgaard <peter@korsgaard.com>
S: Maintained
F: configs/Yones_Toptech_BS1078_V2_defconfig