Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-15 01:17:39 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/socfpga_secu1_defconfig

116 lines
3.6 KiB
Text
Raw Normal View History

ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_ARM=y
Convert CONFIG_SYS_L2_PL310 to Kconfig This converts CONFIG_SYS_L2_PL310 to Kconfig. For omap2 and mvebu the 'select SYS_L2_PL310' locations were determined using ./tools/moveconfig -i CONFIG_SYS_L2_PL310. For mx6 I manually chose ARCH_MX6 as 'select' location. The correctness has been verified using $ ./tools/moveconfig.py -f ARCH_MX6 ~SYS_L2_PL310 ~SYS_L2CACHE_OFF 0 matches That means whenever an ARCH_MX6 board had SYS_L2_PL310 disabled, this was correctly reflected in SYS_L2CACHE_OFF. Thus it's safe to insert the 'select' statement under ARCH_MX6. Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-08-17 13:07:12 +00:00
CONFIG_SYS_L2_PL310=y
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_ARCH_SOCFPGA=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_SYS_MALLOC_LEN=0x4000000
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x800
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-01 15:50:26 +00:00
CONFIG_ENV_SOURCE_FILE="socfpga_secu"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 14:58:06 +00:00
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
board/km/secu: migrate to use environment text files Instead of having these defines in a header file, move them to a simple text file. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-02 17:22:40 +00:00
CONFIG_ENV_SIZE=0x2000
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_ENV_OFFSET=0x100000
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_secu1"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06 17:54:25 +00:00
CONFIG_SPL_TEXT_BASE=0xFFFF0000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 14:58:06 +00:00
CONFIG_DM_RESET=y
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
# CONFIG_SPL_MMC is not set
Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:31 +00:00
CONFIG_SPL_DRIVERS_MISC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 14:58:06 +00:00
CONFIG_SPL_STACK=0x0
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_TARGET_SOCFPGA_ARRIA5_SECU1=y
CONFIG_ENV_OFFSET_REDUND=0x120000
# CONFIG_SPL_LIBDISK_SUPPORT is not set
spi: Rename SPI_SUPPORT to SPI Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:14 +00:00
# CONFIG_SPL_SPI is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0x02000000
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
CONFIG_FIT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-27 17:39:17 +00:00
CONFIG_DISTRO_DEFAULTS=y
Convert CONFIG_BOOT_RETRY_TIME et al to Kconfig This converts the following to Kconfig: CONFIG_BOOT_RETRY_TIME CONFIG_BOOT_RETRY_MIN CONFIG_RESET_TO_RETRY We also introduce CONFIG_BOOT_RETRY to gate these options, and clean up the associated Makefile entry and C code for picking default values of CONFIG_BOOT_RETRY_MIN. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:04 +00:00
CONFIG_BOOT_RETRY=y
CONFIG_BOOT_RETRY_TIME=45
CONFIG_RESET_TO_RETRY=y
Convert CONFIG_BOOTARGS to Kconfig This converts the following to Kconfig: CONFIG_BOOTARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-16 23:06:12 +00:00
CONFIG_USE_BOOTARGS=y
Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-10 14:11:40 +00:00
CONFIG_BOOTCOMMAND="setenv bootcmd 'bridge enable; if test ${bootnum} = 'b'; then run _fpga_loadsafe; else if test ${bootcount} -eq 4; then echo 'Switching copy...'; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; run _fpga_loaduser; fi;echo 'Booting bank $bootnum' && run userload && run userboot;' && setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && saveenv && saveenv && boot;"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_secu1.dtb"
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
Convert CONFIG_CLOCKS to Kconfig This converts the following to Kconfig: CONFIG_CLOCKS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-23 21:20:08 +00:00
CONFIG_CLOCKS=y
Convert CONFIG_MISC_INIT_F et al to Kconfig This converts the following to Kconfig: CONFIG_MISC_INIT_F CONFIG_MISC_INIT_R Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-08 03:59:41 +00:00
CONFIG_MISC_INIT_R=y
Convert CONFIG_SPL_PAD_TO et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-16 21:20:26 +00:00
CONFIG_SPL_PAD_TO=0x10000
Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-19 19:09:22 +00:00
CONFIG_SPL_NO_BSS_LIMIT=y
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
Convert CONFIG_SPL_STACK to Kconfig This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-26 17:13:21 +00:00
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
Convert CONFIG_CONS_INDEX et al to Kconfig This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-11 19:55:51 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set
mtd: Rename SPL_MTD_SUPPORT to SPL_MTD Rename SPL_MTD_SUPPORT to SPL_MTD in order to match MTD. This allows using CONFIG_IS_ENABLED to test for MTD support. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2023-11-04 20:37:47 +00:00
CONFIG_SPL_MTD=y
spl: Ensure all SPL symbols in Kconfig have some SPL dependency Tighten up symbol dependencies in a number of places. Ensure that a SPL specific option has at least a direct dependency on SPL. In places where it's clear that we depend on something more specific, use that dependency instead. This means in a very small number of places we can drop redundant dependencies. Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 03:03:09 +00:00
CONFIG_SPL_NAND_SUPPORT=y
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=32
Convert CONFIG_SYS_BOOTM_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 23:29:46 +00:00
CONFIG_SYS_BOOTM_LEN=0x4000000
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig - Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-17 21:59:45 +00:00
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
CONFIG_SYS_EEPROM_SIZE=1024
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_SPI=y
CONFIG_CMD_WDT=y
CONFIG_CMD_CACHE=y
CONFIG_MTDIDS_DEFAULT="nand0=denali-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=denali-nand:512k(nand.4spl),512k(nand.uboot),128k(nand.env1),128k(nand.env2),0x1000000(nand.rec),0x3ee40000(nand.ubi),0x80000@0x3ff80000(nand.bbt)"
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBIFS is not set
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
Convert CONFIG_BOOTFILE to Kconfig This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-25 16:19:48 +00:00
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="zImage"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_VERSION_VARIABLE=y
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_SPL_DM_SEQ_ALIAS=y
ARM: socfpga: Enable DM RTC bootcount on ABB SECU1 Add and enable RTC-backed boot counter on ABB SECU1 platform. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-06 20:52:21 +00:00
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_BOOTCOUNT=y
CONFIG_DM_BOOTCOUNT_RTC=y
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_DWAPB_GPIO=y
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_DM_I2C_GPIO=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
Convert CONFIG_SYS_MMC_MAX_BLK_COUNT to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMC_MAX_BLK_COUNT Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-10-29 00:27:05 +00:00
CONFIG_SYS_MMC_MAX_BLK_COUNT=256
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_MMC_DW=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_USE_FLASH_BBT=y
CONFIG_NAND_DENALI_DT=y
Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:34 +00:00
CONFIG_SYS_NAND_ONFI_DETECTION=y
Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_LOCATIONS CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:38 +00:00
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_SPL_NAND_DENALI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-26 12:32:25 +00:00
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=2
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
# CONFIG_DM_SPI_FLASH is not set
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
CONFIG_MV88E6352_SWITCH=y
CONFIG_PHY_FIXED=y
CONFIG_PHY_GIGE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
ARM: socfpga: Enable DM RTC bootcount on ABB SECU1 Add and enable RTC-backed boot counter on ABB SECU1 platform. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-06 20:52:21 +00:00
CONFIG_DM_RTC=y
CONFIG_RTC_M41T62=y
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_SPI=y
CONFIG_SPI_MEM=y
CONFIG_DESIGNWARE_SPI=y
Convert CONFIG_WATCHDOG_TIMEOUT_MSECS to Kconfig This converts the following to Kconfig: CONFIG_WATCHDOG_TIMEOUT_MSECS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-13 03:12:28 +00:00
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
CONFIG_DESIGNWARE_WATCHDOG=y
CONFIG_WDT=y
Convert CONFIG_SYS_TIMER_COUNTS_DOWN to Kconfig This converts the following to Kconfig: CONFIG_SYS_TIMER_COUNTS_DOWN Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-16 18:10:38 +00:00
CONFIG_SYS_TIMER_COUNTS_DOWN=y
ARM: socfpga: Add initial support for the ABB SECU board Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-19 18:55:14 +00:00
# CONFIG_GZIP is not set
Reference in a new issue Copy permalink