Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 22:33:18 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/Makefile

308 lines
8.1 KiB
Makefile
Raw Normal View History

Various Makefiles: Add SPDX-License-Identifier tags After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 01:06:16 +00:00
#
# SPDX-License-Identifier: GPL-2.0+
#
arm: at91: smartweb: add DM and DTS support Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-25 05:23:47 +00:00
dtb-$(CONFIG_AT91FAMILY) += at91sam9260-smartweb.dtb \
arm: at91: taurus/axm: add DM and DTS support add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-25 05:23:48 +00:00
at91sam9g20-taurus.dtb \
arm: at91: smartweb: add DM and DTS support Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebased on current ToT] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-25 05:23:47 +00:00
at91sam9g45-corvus.dtb \
corvus DTS / DM support Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> [rebase on current ToT, don't delete gurnard DTB creation] Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-25 05:23:45 +00:00
at91sam9g45-gurnard.dtb
samsung: Enable device tree for smdkc100 Change this board to add a device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-08 04:01:51 +00:00
dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
samsung: Enable device tree for s5p_goni Change this board to add a device tree. This also adds a pinmux header file although it is not used as yet. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-08 04:01:50 +00:00
dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
board:universal: Enable device tree on Universal This patch enables to run Universal board on device tree. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-07 13:59:47 +00:00
dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
config: Move smdkv310 to use common exynos4 file Most of the smdkv310 features are common with other exynos4 boards. To permit easier addition of driver model support, use the common file and add a device tree file. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-08 04:01:49 +00:00
exynos4210-smdkv310.dtb \
board:trats: Enable device tree on Trats This patch enables to run Trats board on device tree. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-07 13:59:48 +00:00
exynos4210-universal_c210.dtb \
board:trats2: Enable device tree on Trats2 This patch enables to run Trats2 board on device tree. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-07 13:59:49 +00:00
exynos4210-trats.dtb \
odroid: add odroid U3/X2 device tree description This is a standard description for Odroid boards. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-01 11:50:52 +00:00
exynos4412-trats2.dtb \
exynos4412-odroid.dtb
board:origen: Enable device tree on Origen This patch enables to run Origen board on device tree. Uart, DRAM and MMC init functions are removed as their generic replacements form the common board file are used. The config file is modified to contain only board specific options. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Chander Kashyap <k.chander@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-07 13:59:46 +00:00
ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board. Currently only the serial pl01x driver is using DT, and the other drivers still use platform data but as more DT lands in the upstream kernel the aim is to migrate the other drivers over to DT as well to have a fully DT configured hikey u-boot. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-20 16:13:59 +00:00
dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
exynos5250-snow.dtb \
exynos: Add support for spring Spring is the first ARM-based HP Chromebook 11. It is similar to snow and it uses the same Samsung Exynos5250 chip. But has some unusual features. Mainline support for it has lagged snow (both in kernel and U-Boot). Now that the exynos5 code is common we can support spring just by adding a device tree and a few lines of configuration. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-03 14:19:37 +00:00
exynos5250-spring.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
exynos5250-smdk5250.dtb \
Exynos5420: Introduce support for the Peach-Pit board While the Exynos5420 chip is used in both Smdk5420 and in the Peach-Pit line of devices, there could be other boards using the same chip, so a common configuration file is being added (exynos5420.h) as well as two common device tree files (exynos54xx.dtsi & exynos5420.dtsi). The peach board as declared in boards.cfg is a copy of smdk5420 declaration. The configuration files are similar, but define different default device trees, console serial ports and prompts. The device tree files for smdk5420 and peach-pit inherit from the same common file. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-06-18 12:23:58 +00:00
exynos5420-smdk5420.dtb \
Exynos5800: Add DTS for new board Peach-Pi We have a new board Peach-Pi similar to Peach-Pit. Peach-Pi differs from Peach-Pit in configuration factors like display resolution, memory size, SoC version etc. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-13 17:08:16 +00:00
exynos5420-peach-pit.dtb \
Odroid-XU3: Add support for Odroid-XU3 This patch adds support for Odroid-XU3. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-12 05:45:45 +00:00
exynos5800-peach-pi.dtb \
exynos5422-odroidxu3.dtb
board: samsung: add initial Espresso7420 board support Espresso7420 is a development/evaluation board for Exynos7420 SoC. It includes multiple onboard compoments (EMMC/Codec) and various interconnects (USB/HDMI). Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-04-23 16:48:14 +00:00
dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
rockchip: Add basic support for firefly-rk3288 The Firefly RK3288 is a suitable target board for initial mainline Rockchip support. It includes a good set of peripherals, a recent SoC and it is readily available. This adds only some basic files required to allow the baord to display a serial message in SPL and hang. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-30 22:55:41 +00:00
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rockchip: Add basic support for jerry This builds and displays an SPL message, but does not function beyond that. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-30 22:55:42 +00:00
rk3288-firefly.dtb \
rockchip: Add basic support for evb-rk3036 board This add some basic files required to allow the board to dispaly serial message and can run command(mmc info etc) Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Moved board Kconfig fragment from previous patch into this one to fix build error: Signed-off-by: Simon Glass <sjg@chromium.org> Series-changes: 8 - moved board Kconfig fragment from previous patch into this one
2015-11-17 06:20:28 +00:00
rk3288-jerry.dtb \
rockchip: Add support for Raxda Rock 2 This board includes an RK3288 SoC on a SOM. It can be mounted on a base-board which provides a wide range of peripherals. So far this is verified to boot to a prompt from a microSD card. The serial console works as well as HDMI. Thanks to Tom Cubie for sending me a board. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22 02:45:24 +00:00
rk3288-rock2-square.dtb \
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
rk3288-evb.dtb \
rockchip: add basic support for fennec-rk3288 board Fennec is a RK3288-based development board with 2 USB ports, HDMI, micro-SD card, audio and WiFi and Gigabit Ethernet. It also includes on-board 8GB eMMC and 2GB of SDRAM. Expansion connectors provides access to display pins, I2C, SPI, UART and GPIOs. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-26 10:28:29 +00:00
rk3288-fennec.dtb \
rockchip: add support for rk3288 miniarm board Miniarm is a rockchip rk3288 based development board, which has lots of interface such as HDMI, USB, micro-SD card, Audio etc. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-08-01 00:46:19 +00:00
rk3288-miniarm.dtb \
rockchip: add support for rk3288 PopMetal board PopMetal is a rockchip rk3288 based board made by ChipSpark, which has many interface such as HDMI, VGA, USB, micro-SD card, WiFi, Audio and Gigabit Ethernet. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-26 10:28:30 +00:00
rk3288-popmetal.dtb \
dts: add support for Rockchip rk3399 soc These files are from kernel upstream: "649a371 Add linux-next specific files for 20160616" with some modification need by U-Boot: - chosen with stdout-path to uart2. - add clock-frequency for uart2 Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-19 13:16:58 +00:00
rk3036-sdk.dtb \
rk3399-evb.dtb
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-08 06:30:16 +00:00
dtb-$(CONFIG_ARCH_MESON) += \
meson-gxbb-odroidc2.dtb
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-plutux.dtb \
tegra20-seaboard.dtb \
tegra20-tec.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
ARM: tegra: rename colibri_t20 board/configuration/device-tree In accordance with our other modules supported by U-Boot and as agreed upon for Apalis/Colibri T30 get rid of the carrier board in the board/ configuration/device-tree naming. While at it also bring the prompt more in line with our other products. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-03-26 00:31:54 +00:00
tegra20-colibri.dtb \
arm: tegra: initial support for apalis t30 This patch adds board support for the Toradex Apalis T30 a computer on module which can be used on different carrier boards. For the sake of ease of use we do not distinguish between different carrier boards for now as the base module features are deemed sufficient enough for regular booting. The following functionality is working so far: - eMMC boot and environment storage - Gigabit Ethernet (once Thierry's PCIe as well as my E1000 resp. i210 fixes hit mainline) - MMC/SD cards (both 8-bit as well as 4-bit slot) - USB client/host (dual role port as client e.g. for DFU/UMS, other two ports as host) Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-09-05 08:18:38 +00:00
tegra30-apalis.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
tegra30-beaver.dtb \
tegra30-cardhu.dtb \
ARM: tegra: add Colibri T30 board support This adds board support for the Toradex Colibri T30 module. Working functions: - SD card boot - eMMC environment and boot - USB host/USB client (on the dual role port) - Network (via ASIX USB) Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-08-05 21:27:30 +00:00
tegra30-colibri.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
tegra30-tec-ng.dtb \
venice2: move device tree to fix build error Commit 5ab502cb gathered all device tree sources to arch/$(ARCH)/dts/. So tegra124-venice2.dts also must go to arch/arm/dts directory to build venice2 board. (Commit 5ab502cb had been posted before venice2 board support was merged. So an unvisible conflict happened.) Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com>
2014-02-20 08:18:42 +00:00
tegra114-dalmore.dtb \
ARM: tegra: add Jetson TK1 board Jetson TK1 is an NVIDIA Tegra124 reference board, which shares much of its design with Venice2. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-03-25 17:39:33 +00:00
tegra124-jetson-tk1.dtb \
ARM: tegra: Add support for nyan-big board Nyan-big is a Tegra124 clamshell board that is very similar to venice2, but it has a different panel, the sdcard cd and wp sense are flipped, and it has a different revision of the AS3722 PMIC. This is the Acer Chromebook 13 CB5-311-T7NN (13.3-inch HD, NVIDIA Tegra K1, 2GB). The display is not currently supported, so it should boot on other nyan-based Chromebooks also, but only the device tree for nyan-big is provided here. The device tree file is from Linux but with features removed which are unlikely to be supported in U-Boot soon (regulators, pinmux). Also the addresses are updated to 32-bit. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> (rebase, change to 'nyan-big', fix pinmux that resets nyan-big)
2014-12-04 13:36:30 +00:00
tegra124-nyan-big.dtb \
ARM: tegra: Add support for TK1-SOM board from Colorado Engineering The Colorado TK1 SOM is a small form factor board similar to the Jetson TK1. The main differences lie in the pinmux, and in that the PCIe controller is set to use in 4lanes+1lane, rather than 2+2. The pinmux header here was generated from a spreadsheet provided by Colorado Engineering using the tegra-pinmux scripts. The spreadsheet was converted from v09 to v11 by me. Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-30 22:54:46 +00:00
tegra124-cei-tk1-som.dtb \
P2571: dts: Add DT file for Tegra210 P2571 board Based on T124 Venice2. SDMMC1 is SD-card slot. Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-02-13 21:39:53 +00:00
tegra124-venice2.dtb \
ARM: tegra: use numeric versioning for p2771-0000 The board ID EEPROM and board ID stickers on p2771-0000 will use a numeric versioning scheme, with version numbers such as 000/100/200/300/400/500. Within NVIDIA, these versions are also known as A00/A01/A02/A03/A04/B00. However, that numbering scheme is not easily visible outside of NVIDIA, and so does not make much sense to use. Convert U-Boot to use the readily visible numeric scheme. Also, it turns out that the current A02 DT actually applies to board versions 000/100/200 (A00..A02). Consequently rename this to 000 not 200 so that all U-Boot builds are named after the first version of the HW they support. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-30 16:22:07 +00:00
tegra186-p2771-0000-000.dtb \
tegra186-p2771-0000-500.dtb \
ARM: tegra: Add e2220-1170 board E2220-1170 is a Tegra210 bringup board with onboard SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, and sockets for various expansion modules. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-05 17:52:07 +00:00
tegra210-e2220-1170.dtb \
ARM: tegra: Add p2371-0000 board P2371-0000 is a P2581 or P2530 CPU board married to a P2595 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, a GPIO expansion header, and an analog audio jack. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-05 17:52:08 +00:00
tegra210-p2371-0000.dtb \
ARM: tegra: Add p2371-2180 board P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-14 04:34:22 +00:00
tegra210-p2371-2180.dtb \
P2571: dts: Add DT file for Tegra210 P2571 board Based on T124 Venice2. SDMMC1 is SD-card slot. Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-02-13 21:39:53 +00:00
tegra210-p2571.dtb
arm: mvebu: Add basic Armada XP / 38x dtsi/dts files These will be needed by the upcoming DM (driver model) support for the Armada XP / 38x SoC's. This will provide DT based probing. The dts files are copied 1:1 from the Linux kernel release v4.2. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-08-31 05:33:57 +00:00
dtb-$(CONFIG_ARCH_MVEBU) += \
arm64: mvebu: Armada 3700: Add Armada 37xx dts files This patch integrates the Armada 3700 dts files from the latest submission on the linux-arm-kernel mailing list. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2016-05-17 12:03:25 +00:00
armada-3720-db.dtb \
arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 This patch adds basic support for the Marvell A375 eval board. Tested are the following interfaces: - I2C - SPI - SPI NOR - Ethernet (mvpp2), port 0 & 1 Currently the A375 SerDes and DDR3 init code is not intergrated. So the SPL U-Boot is not fully functional. Right now, this A375 mainline U-Boot can only be used by chainloading it via the original Marvell U-Boot. This can be done via this command: => tftpboot 00800000 a375/u-boot-dtb.bin;go 00800000 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-29 08:14:54 +00:00
armada-375-db.dtb \
arm: mvebu: Add SolidRun ClearFog Armada 38x initial support This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-10-20 13:14:47 +00:00
armada-388-clearfog.dtb \
arm: mvebu: Add basic Armada XP / 38x dtsi/dts files These will be needed by the upcoming DM (driver model) support for the Armada XP / 38x SoC's. This will provide DT based probing. The dts files are copied 1:1 from the Linux kernel release v4.2. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-08-31 05:33:57 +00:00
armada-388-gp.dtb \
arm: mvebu: add DB-88F6820-AMC board This board is a plug in card for Marvell's switch system development kits. Form-factor aside it is similar to the DB-88F6820-GP with the following differences. - TCLK is 200MHz - SPI1 is used - No SATA - No MMC - NAND flash Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-09-22 00:56:14 +00:00
armada-385-amc.dtb \
arm64: mvebu: Armada 7K/8K: Add Armada 7K/8K dts files This patch integrates the Armada 7K/8K dts files from the latest submission on the linux-arm-kernel mailing list. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
2016-05-25 06:23:31 +00:00
armada-7040-db.dtb \
arm: mvebu: Add armada-xp-maxbcm.dts for maxbcm board This is needed for the upcoming ethernet DM conversion of the maxbcm board. The configuration of the PHY is then extracted from the DT instead of using the defines from the config header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-11-19 10:03:25 +00:00
armada-xp-gp.dtb \
mvebu: Support Synology DS414 This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-12-25 13:41:25 +00:00
armada-xp-maxbcm.dtb \
arm: mvebu: Add support for the Armada XP theadorable board This patch adds support for the Armada XP (MV78260) based theadorable board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR, LCD and SATA (SSD) interfaces / devices. Two defconfigs are added: theadorable_defconfig: The production U-Boot version with a stripped down drivers and feature list. This removes networking, USB and PCI support. theadorable_debug_defconfig: The debugging / testing U-Boot version with full support for all drivers. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2016-01-20 07:13:29 +00:00
armada-xp-synology-ds414.dtb \
armada-xp-theadorable.dtb
arm: mvebu: Add basic Armada XP / 38x dtsi/dts files These will be needed by the upcoming DM (driver model) support for the Armada XP / 38x SoC's. This will provide DT based probing. The dts files are copied 1:1 from the Linux kernel release v4.2. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-08-31 05:33:57 +00:00
ARM: UniPhier: add device tree sources This commit adds basic device tree sources for UniPhier SoCs/boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-26 09:33:59 +00:00
dtb-$(CONFIG_ARCH_UNIPHIER) += \
ARM: dts: uniphier: add PH1-LD11 SoC/board device tree sources Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:49 +00:00
uniphier-ph1-ld11-ref.dtb \
ARM: dts: uniphier: add PH1-LD20 SoC/board device tree sources Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-18 07:41:48 +00:00
uniphier-ph1-ld20-ref.dtb \
ARM: UniPhier: add device tree sources This commit adds basic device tree sources for UniPhier SoCs/boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-26 09:33:59 +00:00
uniphier-ph1-ld4-ref.dtb \
ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for PH1-LD6b reference board. Import from Linux with some adjustments: - Use SPDX-License-Identifier - Add clock-frequency to serial nodes - Drop unusable nodes from -ref.dts While I am here, sort Makefile entries alphabetically. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-08-28 13:33:15 +00:00
uniphier-ph1-ld6b-ref.dtb \
ARM: uniphier: add support for PH1-Pro4 Ace and Sanji boards Initial commit for PH1-Pro4 Ace and Sanji boards. Note: There are two variants for the Ace board in terms of the amount of DDR memory; 1GB or 2GB. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-12 11:27:02 +00:00
uniphier-ph1-pro4-ace.dtb \
ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for PH1-LD6b reference board. Import from Linux with some adjustments: - Use SPDX-License-Identifier - Add clock-frequency to serial nodes - Drop unusable nodes from -ref.dts While I am here, sort Makefile entries alphabetically. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-08-28 13:33:15 +00:00
uniphier-ph1-pro4-ref.dtb \
ARM: uniphier: add support for PH1-Pro4 Ace and Sanji boards Initial commit for PH1-Pro4 Ace and Sanji boards. Note: There are two variants for the Ace board in terms of the amount of DDR memory; 1GB or 2GB. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-12 11:27:02 +00:00
uniphier-ph1-pro4-sanji.dtb \
ARM: uniphier: add PH1-Pro5 support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:40 +00:00
uniphier-ph1-pro5-4kbox.dtb \
ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for PH1-LD6b reference board. Import from Linux with some adjustments: - Use SPDX-License-Identifier - Add clock-frequency to serial nodes - Drop unusable nodes from -ref.dts While I am here, sort Makefile entries alphabetically. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-08-28 13:33:15 +00:00
uniphier-ph1-sld3-ref.dtb \
ARM: uniphier: add ProXstream2 and PH1-LD6b support The DDR SDRAM initialization code has not been mainlined yet, but U-Boot proper should work. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-21 15:27:41 +00:00
uniphier-ph1-sld8-ref.dtb \
uniphier-proxstream2-gentil.dtb \
uniphier-proxstream2-vodka.dtb
ARM: zynq: rename CONFIG_ZYNQ to CONFIG_ARCH_ZYNQ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-03-16 07:43:24 +00:00
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
zynq-zc706.dtb \
zynq-zed.dtb \
arm: dts: zynq: Add digilent ZYBO board dts It's a Zynq board similar in design to the currently supported ones. 512MB of RAM and UART1 is used. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-08-28 11:16:39 +00:00
zynq-zybo.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
zynq-microzed.dtb \
zynq: Add Zynq PicoZed board support The PicoZed is a System-on-Module board which is marketed as part of the ZedBoard/MicroZed/etc. collection. It includes a Zynq-7000 processor. This patch adds support that covers all the variants of the PicoZed including the SKUs with Z7010/Z7020 and Z7015/Z7030 Zynq chips. This patch set however only covers support for the System-on-Module and does not cover any extra components that are available on carrier boards (except those that are fanned out of the module itself). More information on this board, its variants and available carrier boards is available at: http://zedboard.org/product/picozed Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-14 04:58:10 +00:00
zynq-picozed.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
zynq-zc770-xm010.dtb \
ARM: zynq: Add support for zc770-xm011 Add xm011 DTS file and related configs and configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-22 09:39:04 +00:00
zynq-zc770-xm011.dtb \
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb
ARM: zynqmp: Add DTS for ep108 board Add DTS for ep108 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: u-boot
2015-10-30 14:39:18 +00:00
dtb-$(CONFIG_ARCH_ZYNQMP) += \
ARM64: zynqmp: Add support for ZCU102 platform Add new board support. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-07 13:58:23 +00:00
zynqmp-ep108.dtb \
zynqmp-zcu102.dtb \
ARM64: zynqmp: Add support for zc1751 with DC cards Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-07 14:00:11 +00:00
zynqmp-zcu102-revB.dtb \
zynqmp-zc1751-xm015-dc1.dtb \
zynqmp-zc1751-xm016-dc2.dtb \
ARM64: zynqmp: Add support for zc1751-dc4 zc1751-dc4 contains four GEMs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-26 06:06:38 +00:00
zynqmp-zc1751-xm018-dc4.dtb \
ARM64: zynqmp: Add support for zc1751 with DC cards Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-07 14:00:11 +00:00
zynqmp-zc1751-xm019-dc5.dtb
arm, am335x: siemens: enable DM/DTS support enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-13 13:16:01 +00:00
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-bone.dtb \
am335x-draco.dtb \
am335x-evm.dtb \
ARM: dts: AM335x-BBG: Add initial support Add initial DTS support for AM335x-BBG Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-16 05:54:29 +00:00
am335x-evmsk.dtb \
ARM: dts: AM335x-ICEv2: Add minimal dts support Add minimal dts support for AM335x-ICEv2 board Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
2016-05-16 06:17:28 +00:00
am335x-bonegreen.dtb \
arm, am335x: siemens: enable DM/DTS support enable basic DM/DTS support for the siemens am335x based boards. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-13 13:16:01 +00:00
am335x-icev2.dtb \
am335x-pxm50.dtb \
am335x-rut.dtb
ARM: dts: AM43x-EPOS Initial Support Add initial DTS support for AM43-EPOS evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-16 05:41:17 +00:00
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \
ARM: dts: AM437x-IDK Initial Support Add initial DTS support for AM437x-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-16 05:41:18 +00:00
am43x-epos-evm.dtb \
am437x-idk-evm.dtb
armv8: cavium: Add the device tree for ThunderX This commit adds the FDT for the ThunderX family of SoCs Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-14 16:55:49 +00:00
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
ARM: socfpga: abolish CONFIG_SOCFPGA Replace CONFIG_SOCFPGA with CONFIG_ARCH_SOCFPGA. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-04-21 11:38:23 +00:00
dtb-$(CONFIG_ARCH_SOCFPGA) += \
dt: socfpga: Import and enable Arria V DK DTS Import DTS for Arria V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
2014-12-30 20:08:57 +00:00
socfpga_arria5_socdk.dtb \
ARM: socfpga: add support for IS1 board This adds support for IS1 board. Pretty usual socfpga board, 256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two additional ethernet ports connected to the FPGA. Signed-off-by: Pavel Machek <pavel@denx.de>
2016-06-07 10:37:23 +00:00
socfpga_cyclone5_is1.dtb \
arm: socfpga: Add support for DENX MCV SoM and MCVEVK board Add support for DENX MCV SoM, which is CycloneV based and the associated DENX MCVEVK baseboard. The board can boot from eMMC. Ethernet and USB is supported. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-02 23:37:28 +00:00
socfpga_cyclone5_mcvevk.dtb \
dt: socfpga: Import and enable Cyclone V DK DTS Import DTS for Cyclone V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Vince Bridgers <vbridger@opensource.altera.com>
2014-12-30 20:05:53 +00:00
socfpga_cyclone5_socdk.dtb \
arm: socfpga: Add support for the Terasic DE-0 Atlas board Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-09-01 22:41:52 +00:00
socfpga_cyclone5_de0_nano_soc.dtb \
arm: socfpga: Add support for Terasic SoCkit board Add support for Terasic SoCkit, which is CycloneV based board. The board can boot either from SD/MMC or QSPI. Ethernet is also supported. Signed-off-by: Marek Vasut <marex@denx.de>
2015-06-21 15:28:53 +00:00
socfpga_cyclone5_sockit.dtb \
arm: socfpga: Add SoCFPGA SR1500 board The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
2015-11-18 10:06:09 +00:00
socfpga_cyclone5_socrates.dtb \
arm: socfpga: Add samtec VIN|ING board Add support for board based on the popular Altera Cyclone V SoC. This board has the following properties: - 1 GiB of DRAM - 1 Gigabit ethernet - 1 USB gadget port - 1 USB host port with an on-board hub - 2 QSPI NORs connected to the Cadence QSPI core - Multiple I2C EEPROMs and one I2C temperature sensor Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> --- V2: Update the defconfig as per Tom's request
2015-12-01 17:09:52 +00:00
socfpga_cyclone5_sr1500.dtb \
socfpga_cyclone5_vining_fpga.dtb
arm: socfpga: Add SoCFPGA SR1500 board The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
2015-11-18 10:06:09 +00:00
ARM: dts: dra72: add rev C evm support Add DTS support for dra72 evm Rev C which has the following changes * Two ethernet ports now instead of the single one in rev B. * DP83867 ethernet phy instead of DP838865. Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-27 07:31:41 +00:00
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \
dra72-evm-revc.dtb
ARM: dts: AM572x-IDK Initial Support Add initial DTS support for AM572-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-10 04:05:45 +00:00
dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
am572x-idk.dtb
stv0991: fdt: add stv0991 device tree This patch adds device tree for the ST Micro stv0991 board & enables device tree control. Progressively device tree support for the drivers being used will also be added. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-03 21:10:34 +00:00
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target This patch includes the latest DT sources for socfpga from the current Linux kernel. And enables CONFIG_OF_CONTROL for the new build target "socfpga_socrates" (the EBV SoCrates board) to make use of this new DT support. Until this patch, the only SoCFPGA U-Boot target in mainline is "socfpga_cyclone5". This build target is not (yet) changed to support DT. So nothing changes for this target. Even though the long-term goal should be to move all SoCFPGA targets over to DT. One of the reasons to enable DT support in SoCFPGA is, that I need to support multiple different SPI controllers for this platform. This is the QSPI Cadence controller and the Designware SPI master controller. Both are implemented in the SoCFPGA. And enabling both controllers is only possible by using the new driver model (DM). The DM SPI code only supports DT based probing. So it was easier to move SoCFPGA to DT than to add the (deprecated) platform-data based probing to the DM SPI suport. Note that the image with the dtb embedded is u-boot-dtb.img. This needs to be used now for those DT enabled boards instead of u-boot.img. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Cc: Simon Glass <sjg@chromium.org>
2014-11-07 13:10:41 +00:00
arm: ls1021aqds: Convert to driver model and enable serial support Split duart configuration as device tree file. Move /chosen node out of board commone device tree. Convert ls1021aqds nor and SD configurations to driver model support (qspi already uses DM). Enable ns16550 DM serial driver for nor configurations. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
2016-02-08 21:04:17 +00:00
dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
arm: ls1021aqds: Enable driver model lpuart serial driver Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart to driver model suport. Enable lpuart port driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
2016-02-08 21:47:29 +00:00
ls1021a-qds-lpuart.dtb \
arm: ls1021atwr: Enable driver model lpuart serial driver Convert ls1021atwr_nor_lpuart to driver model support. As a start, enable lpuart serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alison Wang <alison.wang@nxp.com> Tested-by: Alison Wang <alison.wang@nxp.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-14 03:39:06 +00:00
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
armv8: LS2080A: Rename LS2085A to reflect LS2080A LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-09 11:12:07 +00:00
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-rdb.dtb
armv8/ls1043aqds: Spilt off board device tree Move new /chosen node out of the board device tree. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-21 09:14:54 +00:00
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
armv8/ls1043aqds: Add lpuart support Add lpuart support using the driver model. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-21 09:14:55 +00:00
fsl-ls1043a-qds-lpuart.dtb \
armv8: ls1012a: Add support of ls1012aqds board QorIQ LS1012A Development System (LS1012AQDS) is a high-performance development platform, with a complete debugging environment. The LS1012AQDS board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 13:11:34 +00:00
fsl-ls1043a-rdb.dtb \
armv8: ls1046aqds: Add LS1046AQDS board support LS1046AQDS Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-07 09:56:14 +00:00
fsl-ls1046a-qds-duart.dtb \
armv8: ls1046ardb: Add LS1046ARDB board support LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot SATA: * SerDes2 Lane3 to SATA port USB 3.0: one super speed USB 3.0 type A port one Micro-AB port UART: supports two UARTs up to 115200 bps for console Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-07 10:47:28 +00:00
fsl-ls1046a-rdb.dtb \
armv8: ls1012a: Add support of ls1012ardb board QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 13:11:35 +00:00
fsl-ls1012a-qds.dtb \
armv8: ls1012a: Add support of ls1012afrdm board QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development platform, with a complete debugging environment. The LS1012AFRDM board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 13:11:36 +00:00
fsl-ls1012a-rdb.dtb \
fsl-ls1012a-frdm.dtb
dm: ls1021a: Bring in ls1021a dts files from linux kernel Bring in required device tree files for ls1021a from Linux. These are initially unchanged and have a number of pieces not needed by U-Boot. Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-03-25 12:23:26 +00:00
board: Add Qualcomm Dragonboard 410C support This commit add support for 96Boards Dragonboard410C. It is board based on APQ8016 Qualcomm SoC, complying with 96boards specification. Features (present out of the box): - 4x Cortex A53 (ARMv8) - 2x USB Host port - 1x USB Device port - 4x LEDs - 1x HDMI connector - 1x uSD connector - 3x buttons (Power, Vol+, Vol-/Reset) - WIFI, Bluetooth with integrated antenna - 8GiB eMMC U-Boot boots chained with fastboot in 64-bit mode. For detailed build instructions see readme.txt in board directory. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Tested-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:33 +00:00
dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
sunxi: Add defconfig and dts for Dserve DSRV9703C tablet The Dserve DSRV9703C is a 9.7" A10 tablet with a 1024x768 ips LCD, 1G RAM, 4GB flash, a Focaltech FT5406EE8 touchscreen and rtl8188ctv wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-19 07:55:47 +00:00
sun4i-a10-dserve-dsrv9703c.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i: Add dts and defconfig for iNet-1 based tablets The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007. This patch has been tested on both rev2 and rev5 of this board / these tablets. These tablets feature the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-09 07:46:30 +00:00
sun4i-a10-inet1.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun4i-a10-inet-3f.dtb \
sun4i-a10-inet-3w.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun4i-a10-inet97fv2.dtb \
sun4i: Add defconfig and dts for inet9f-rev03 based tablets The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet. These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen. Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-08 20:28:30 +00:00
sun4i-a10-inet9f-rev03.dtb \
sunxi: dts: Sync with kernel Sync the sunxi dts files with the changes queued up for kernel-4.3 in mripard's sunxi/dt-for-4.3 branch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-05 15:39:14 +00:00
sun4i-a10-itead-iteaduino-plus.dtb \
sunxi: dts: Add dts files which have been submitted but not yet merged upstream We need dts files for all boards we support, so bring in a few unmerged ones, these will be replaced with the upstream merged versions the next time we sync dts files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-23 12:27:01 +00:00
sun4i-a10-jesurun-q5.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-mk802.dtb \
sun4i-a10-mk802ii.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i: Add defconfig and dts for the pov protab2-ips9 tablet The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-05 08:50:56 +00:00
sun4i-a10-pcduino.dtb \
sunxi: Sync dts files with the upstream kernel Sync dts files with the upstream kernel including changes queued for 4.6: https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6 Note this adds a number of new unused board dts files. I've asked the authors of the kernel commits adding these to submit a matching defconfig to u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:37:09 +00:00
sun4i-a10-pcduino2.dtb \
sun4i: Add defconfig and dts for the pov protab2-ips9 tablet The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-05 08:50:56 +00:00
sun4i-a10-pov-protab2-ips9.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN5I) += \
sunxi: Add support for the Auxtek-T003 HDMI stick The Auxtek-T003 HDMI stick is an A10s based HDMI stick with USB wifi, and composite video out support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-05 15:50:03 +00:00
sun5i-a10s-auxtek-t003.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i: Add A10s-Wobo-i5 defconfig and dts The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. The dts file changes are identical to the changes submitted to the upstream kernel. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-09-07 20:43:57 +00:00
sun5i-a10s-wobo-i5.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun5i-a13-ampe-a76.dtb \
sunxi: Add defconfig and dts for Difrence DIT4350 tablet The Difrnce dit4350 tablet is a tiny tablet with a 4.3" 16:9 480x272 LCD, A13 SoC, 512M RAM, 4G NAND, solomon systech ssd2532qn6 touchscreen at i2c1 address 0x48, Memsic MXC622X accelerometer at i2c1 address 0x15 and rtl8188etv wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-10 21:35:56 +00:00
sun5i-a13-difrnce-dit4350.dtb \
sun5i: Add defconfig and dts file for the Empire Electronix D709 tablet The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet, featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack. Empire Electronix is written on the back of the tablet, the D709 model info can be found in the about tablet menu in android. The PCB has no markings to speak of. This dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-12-20 11:30:18 +00:00
sun5i-a13-empire-electronix-d709.dtb \
sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet Add a defconfig and dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-08-19 10:21:49 +00:00
sun5i-a13-empire-electronix-m712.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun5i-a13-hsg-h702.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun5i-a13-inet-86vs.dtb \
sunxi: Add inet98v_rev2 defconfig and dts file The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-25 12:20:49 +00:00
sun5i-a13-inet-98v-rev2.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
sun5i: Add q8_a13_tablet defconfig and dts This commits adds a generic support for q8 formfactor a13 based tablets. These tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used. The wifi is USB based, and thus not listed in devicetree. ATM the kernel does not support the touchscreen / accelerometer on these devices. In the future we may need multiple configs with different CONFIG_DEFAULT_DEVICE_TREE settings, this depends on how we solve the hw differences on the kernel side. For now this will suffice. The dts files are identical to the dts files submitted to the upstream kernel for these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-05 15:01:31 +00:00
sun5i-a13-q8-tablet.dtb \
sunxi: Add CHIP support The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack and two connectors to plug additional boards on top of it. The DT is identical to the DT submitted to the upstream kernel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-15 20:04:10 +00:00
sun5i-a13-utoo-p66.dtb \
sun5i-r8-chip.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-hummingbird.dtb \
sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sunxi: Add new Mele_A1000G_quad defconfig The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using the same defconfig (and dts on the kernel side) for both models. Unfortunately this does not work for the otg controller, on the M9 this is routed to a micro-usb connector on the outside, while as on the A1000G-quad it is connected to an usb to sata bridge. This commit adds a new defconfig for the Mele-A1000G-quad to allow using different otg controller settings on the 2 boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-01 14:37:24 +00:00
sun6i-a31-mele-a1000g-quad.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun6i-a31-mixtile-loftq.dtb \
sunxi: Add defconfig and dts for colorfly e708 q1 tablet The colorfly e708 q1 is a 7" tablet which is clearly marked as colorfly e708 q1 on the back. It features a 9:16 800x1280 IPS LCD, A31s SoC, 1GB RAM, 8G NAND, ilitek 2139qt004 touchscreen on i2c-1 addr 0x41, stk8313 accelerometer on i2c-2 addr 0x22 and a rtl8188etv wifi chip. The added dts is identical to the dts submitted to the upstream kernel, note this commit also syncs axp22x.dtsi and sun6i-a31.dtsi with the upstream kernel as the added dts depends on these. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-09 21:45:23 +00:00
sun6i-a31s-colorfly-e708-q1.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun6i-a31s-cs908.dtb \
sun6i: Add defconfig and dts file for tablets using the inet-q972 PCB Add a defconfig and dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-18 17:50:42 +00:00
sun6i-a31s-inet-q972.dtb \
sunxi: Add defconfig for the Sinovoip BPI-M2 board The Sinovoip BPI-M2 is a SBC board based on the A31s SoC it features 1G RAM, a microsd slot, Gbit ethernet, 4 usb-a USB-2 ports, ir receiver, stereo headphone jack and hdmi video output. The dts changes are identical to the dts files submitted upstream. A few notes on the use if dldo and aldo regulators. DLDO1 is used for Vdd for the ethernet phy, ALDO2 is used for AVdd for the ethernet phy. ALDO1 is used to power the sdio wifi module. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-13 21:57:03 +00:00
sun6i-a31s-primo81.dtb \
sunxi: Sync dts files with the upstream kernel Sync dts files with the upstream kernel including changes queued for 4.6: https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6 Note this adds a number of new unused board dts files. I've asked the authors of the kernel commits adding these to submit a matching defconfig to u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:37:09 +00:00
sun6i-a31s-sina31s.dtb \
sun6i-a31s-sinovoip-bpi-m2.dtb \
sun6i-a31s-yones-toptech-bs1078-v2.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN7I) += \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun7i-a20-ainol-aw1.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-bananapi.dtb \
sunxi: Sync dts files with upstream kernel Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-18 18:51:12 +00:00
sun7i-a20-bananapi-m1-plus.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sunxi: Sync dts files with the upstream kernel Sync dts files with the upstream kernel including changes queued for 4.6: https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6 Note this adds a number of new unused board dts files. I've asked the authors of the kernel commits adding these to submit a matching defconfig to u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:37:09 +00:00
sun7i-a20-icnova-swac.dtb \
sun7i-a20-itead-ibox.dtb \
sunxi: Add support for the Lamobo R1 board The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-18 14:34:13 +00:00
sun7i-a20-lamobo-r1.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-m3.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun7i-a20-m5.dtb \
sun7i-a20-mk808c.dtb \
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-08-26 18:38:33 +00:00
sun7i-a20-olimex-som-evb.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sunxi: Sync dts files with upstream kernel Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-18 18:51:12 +00:00
sun7i-a20-olinuxino-lime2-emmc.dtb \
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
sun7i-a20-pcduino3-nano.dtb \
sunxi: dts: Add dts files which have been submitted but not yet merged upstream We need dts files for all boards we support, so bring in a few unmerged ones, these will be replaced with the upstream merged versions the next time we sync dts files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-23 12:27:01 +00:00
sun7i-a20-primo73.dtb \
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
sun7i-a20-wexler-tab7200.dtb \
sun7i-a20-wits-pro-a20-dkt.dtb \
sun7i-a20-yones-toptech-bd1078.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN8I_A23) += \
sunxi: Sync dts files with the linux kernel Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2 , this gives us a proper dtsi file for the A33 rather then abusing sun8i-a23.dtsi for this. And this replaces our minimal (dummy) sun7i-a20-mk808c and sun8i-a33-astar-mid756 dts files with proper ones. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-02 13:53:40 +00:00
sun8i-a23-evb.dtb \
sunxi: Add support for gt90h-v4 tablets The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. The pmic setup on this board is somewhat special, dcdc2 MUST be set to 1.1V instead of the usual 1.2V otherwise the board is very unstable. aldo1 is used to power the micro sd slot, dldo1 is used for wifi. This commit adds a defconfig + dts (as submitted to the kernel) for the gt90h-v4 pcb. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-14 14:13:03 +00:00
sun8i-a23-gt90h-v4.dtb \
sunxi: Add defconfig and dts file for inet86dz board The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file this commit adds is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-06-12 17:44:42 +00:00
sun8i-a23-inet86dz.dtb \
sunxi: Add defconfig and dts file for Polaroid MID2407PXE03 tablet The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-06-11 13:19:38 +00:00
sun8i-a23-polaroid-mid2407pxe03.dtb \
sunxi: Add defconfig and dts for the Polaroid MID2809PXE4 tablet The Polaroid MID2809PXE4 is a 9" tablet which is clearly marked Polaroid MID2809PXE4 on the back. It features a 9" 16:9 800x480 LCD, A23 Soc, 1GB RAM, 8GB NAND, gsl3670 touchscreen and esp8089 wifi. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:35:12 +00:00
sun8i-a23-polaroid-mid2809pxe04.dtb \
sunxi: Add generic defconfigs for A23 Q8 tablets with 800x480 LCD The 7" Q8 tablet enclosure is used for a ton of slightly different cheap chinese tablets. There are some differences in which accelerometer / wifi is used, but other then that these are all the same from a u-boot / kernel pov. When we get to adding accelerometer support the plan is to add some kind of autodetection and mangle the dt accordingly (likely using the new quirks mechanism). For now this is a non issue as we do not yet have accelerometer support, and in the future, some sort of auto-detect is the way to go as we cannot expect users to exactly know what is inside their tablet. The dts files this commit adds are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-29 09:48:01 +00:00
sun8i-a23-q8-tablet.dtb
sunxi: dts: Add minimal dts files for board which lack a dts sofar u-boot has support for a number of boards for which a dts file still needs to be written, add minimal dts files for these boards so that we can switch them over to driver-model / fdt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-23 15:04:19 +00:00
dtb-$(CONFIG_MACH_SUN8I_A33) += \
sunxi: Add a proper dts file for the ga10h a33 based tablet Add and use a proper dts for the ga10h a33 based tablet, as submitted upstream. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-02 14:18:44 +00:00
sun8i-a33-ga10h-v1.1.dtb \
sunxi: add proper device tree for iNet D978 rev2 boards Add a proper dts for the iNet D978 rev2 based A33 tablets. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-08-27 14:16:12 +00:00
sun8i-a33-inet-d978-rev2.dtb \
sunxi: Add support for A33-OLinuXino board A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. The dts files are identical to the ones submitted to the upstream kernel. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-02 12:21:37 +00:00
sun8i-a33-olinuxino.dtb \
sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD The 7" Q8 tablet enclosure is used for a ton of slightly different cheap chinese tablets. There are some differences in which accelerometer / wifi is used, but other then that these are all the same from a u-boot / kernel pov. When we get to adding accelerometer support the plan is to add some kind of autodetection and mangle the dt accordingly (likely using the new quirks mechanism). For now this is a non issue as we do not yet have accelerometer support, and in the future, some sort of auto-detect is the way to go as we cannot expect users to exactly know what is inside their tablet. The dts[i] files this commit adds are identical to the ones submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-20 23:46:49 +00:00
sun8i-a33-q8-tablet.dtb \
sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot) The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. The DTS file is identical to the one submitted to the upstream kernel. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-06-24 12:33:35 +00:00
sun8i-a33-sinlinx-sina33.dtb \
sun8i-r16-parrot.dtb
sunxi: Add suport for A83T HomletV2 Board by Allwinner Add dts and defconfig for h8homletv2 board. H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-28 17:07:27 +00:00
dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sunxi: Add suport for A83T based Banana-pi M3 Board Add dts and defconfig for Banana-pi M3 board. It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI, mic, AP6212 Wifi, etc on it. It is paired with AXP813 PMIC which is almost same as AXP818. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-11 17:21:00 +00:00
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sunxi: Sync dts files with the upstream kernel Sync dts files with the upstream kernel including changes queued for 4.6: https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6 Note this adds a number of new unused board dts files. I've asked the authors of the kernel commits adding these to submit a matching defconfig to u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-14 16:37:09 +00:00
sun8i-a83t-cubietruck-plus.dtb \
sunxi: Add suport for A83T based Banana-pi M3 Board Add dts and defconfig for Banana-pi M3 board. It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI, mic, AP6212 Wifi, etc on it. It is paired with AXP813 PMIC which is almost same as AXP818. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-11 17:21:00 +00:00
sun8i-a83t-sinovoip-bpi-m3.dtb
sunxi: Add H3 dts[i] files These files are based on the current latest upstream kernel work. The bus_gates bindings may still change, but for u-boot that does not matter as we do not (yet) use any clock info from devicetree for sunxi u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-20 15:03:56 +00:00
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sunxi: Sync dts files with upstream kernel Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-08-18 18:51:12 +00:00
sun8i-h3-bananapi-m2-plus.dtb \
sunxi: Add defconfig and dts for Orange Pi 2 SBC The Orange Pi 2 is a SBC based on the Allwinner H3 SoC with a uSD slot, 4 USB ports connected via a USB-2 hub, a 10/100M ethernet port using the SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, USB OTG, HDMI, a TRRS headphone jack for stereo out and composite out, a microphone, an IR receiver, a CSI connector, 2 LEDs, a 3 pin UART header and a 40-pin GPIO header. The added dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 08:59:23 +00:00
sun8i-h3-orangepi-2.dtb \
sunxi: Add defconfig and dts file for the Orange Pi Lite SBC The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-07-09 20:20:00 +00:00
sun8i-h3-orangepi-lite.dtb \
sunxi: Add defconfig and dts file for Orange Pi One SBC The Orange Pi One SBC, is a stripped down version of the popular Orange Pi PC. The one is a H3 based SBC, with 512M of RAM, micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-09 13:02:24 +00:00
sun8i-h3-orangepi-one.dtb \
sunxi: Add H3 dts[i] files These files are based on the current latest upstream kernel work. The bus_gates bindings may still change, but for u-boot that does not matter as we do not (yet) use any clock info from devicetree for sunxi u-boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-20 15:03:56 +00:00
sun8i-h3-orangepi-pc.dtb \
sunxi: Add defconfig and dts file for the Orange Pi PC Plus SBC There is a new Orange Pi PC *Plus* version available now, this is an extended version of the regular Orange Pi PC with sdio wifi and an eMMC. The upstream kernel devs have decided that they want a separate dts for the PC Plus rather then sharing a single dts between the regular PC and the PC Plus. So add a new orangepi_pc_plus_defconfig to match. The added dts file matches the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-26 15:47:16 +00:00
sun8i-h3-orangepi-pc-plus.dtb \
sunxi: Add defconfig and dts file for the Orange Pi Plus2E SBC The Orange Pi Plus2E is an extended version of the Orange Pi Pc Plus, with 2G RAM and an external gbit ethernet phy. The dts file is identical to the one submitted to the upstream kernel, except that it has the pending patch to enable the ethernet controller squashed in, as u-boot already has sun8i-emac support. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-03 09:42:31 +00:00
sun8i-h3-orangepi-plus.dtb \
sunxi: Add defconfig and dts for the NanoPi NEO The NanoPi NEO is a simple h3 board with 512MB RAM, ethernet, one usb and one usb OTG connector. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-09-13 16:03:23 +00:00
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-nanopi-neo.dtb
sunxi: Add Pine64+ support The Pine64+ is a system based on the Allwinner A64 SoC. It is capable of running AArch64 code and thus is the first of its kind for the sunxi target. This patch adds a defconfig and device tree chunks for it. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: Change patch description] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-29 15:29:11 +00:00
dtb-$(CONFIG_MACH_SUN50I) += \
arm64: Pine64: update FDT files The originally committed .dts files for the Pine64 were from an early proof-of-concept version and should have never been committed upstream. Replace them with much more mature versions, which also use a different naming scheme. Please note that at this point there is at least one binding which has not been agreed upon, so this is subject to change. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-04 21:15:33 +00:00
sun50i-a64-pine64-plus.dtb \
sun50i-a64-pine64.dtb
sunxi: dts: Sync all dts files with upstream kernel Bring all the sunxi dts files (and update existing ones) from mripard/sunxi/dt-for-4.1 (which will be merged into upstream master any day now). This is necessary so that we can move all sunxi boards over to the driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-04-15 17:03:49 +00:00
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
vf610: dts: Add device tree support Add device tree files for Freescale Vybrid platform and Toradex Colibri VF50, VF61 modules. Device tree files are taken from upstream Kernel. Removed the stuff which are not used/supported yet in U-Boot. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-06-01 13:07:21 +00:00
dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
arm: vf610-twr: Add device tree file's - Add device tree files for NXP/Freescale VF610 Tower Board. - Enable lpuart support on NXP/Freescale VF610 Tower Board. - Use UART1 as stdout. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-27 05:01:48 +00:00
vf610-colibri.dtb \
arm: pcm052: Add device tree file's - Add device tree files for Phytec phyCORE-Vybrid Board. - Enable lpuart support for Phytec phyCORE-Vybrid Board. - Use UART1 for stdout. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-27 05:01:49 +00:00
vf610-twr.dtb \
pcm052: add new BK4r1 target based on PCM052 SoM Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2016-09-26 07:08:08 +00:00
pcm052.dtb \
bk4r1.dtb
vf610: dts: Add device tree support Add device tree files for Freescale Vybrid platform and Toradex Colibri VF50, VF61 modules. Device tree files are taken from upstream Kernel. Removed the stuff which are not used/supported yet in U-Boot. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-06-01 13:07:21 +00:00
arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo i.CoreM6 DualLite/Solo modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DL, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-08 12:30:19 +00:00
dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
imx6dl-icore.dtb
arm: imx: add i.MX6ULL 14x14 EVK board support Add i.MX6ULL EVK board support: Add device tree file, which is copied from NXP Linux. Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR. The uart iomux settings are still keeped in board file. Boot Log: U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800) CPU: Freescale i.MX6ULL rev1.0 at 396MHz CPU: Commercial temperature grade (0C to 95C) at 15C Reset cause: POR Model: Freescale i.MX6 ULL 14x14 EVK Board Board: MX6ULL 14x14 EVK DRAM: 512 MiB MMC: initialized IMX pinctrl driver FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 => mmc dev 1 switch to partitions #0, OK mmc1 is current device Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2016-08-11 06:02:57 +00:00
arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree Add base device for NXP i.MX 7Solo/7Dual. The two SoC are very similar and hence can share the same device tree for boot loaders purpose. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-05 22:27:06 +00:00
dtb-$(CONFIG_MX7) += imx7-colibri.dtb
vf610: dts: Add device tree support Add device tree files for Freescale Vybrid platform and Toradex Colibri VF50, VF61 modules. Device tree files are taken from upstream Kernel. Removed the stuff which are not used/supported yet in U-Boot. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-06-01 13:07:21 +00:00
ARM: dts: k2l: Enable OF_CONTROL and DM Import k2l specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-09-19 09:30:21 +00:00
dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
ARM: dts: k2e: Enable OF_CONTROL and DM Import k2e specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-09-19 09:30:22 +00:00
k2l-evm.dtb \
ARM: dts: k2g: Add DT support Add basic DT support for k2g evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-09-19 10:56:55 +00:00
k2e-evm.dtb \
k2g-evm.dtb
ARM: dts: k2hk: Enable OF_CONTROL and DM Import k2hk specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-09-19 09:30:20 +00:00
ARM: at91/dt: Add device tree for SAMA5D2 Xplained Add device tree for SAMA5D2 Xplained board. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2016-07-25 09:46:17 +00:00
dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
at91-sama5d2_xplained.dtb
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
targets += $(dtb-y)
fdt: arm: Drop device tree padding The 4KB padding doesn't seem necessary since we don't normally adjust the control device tree file within U-Boot. Also drop the memory table space. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-12 20:55:03 +00:00
# Add any required device tree compiler flags here
DTC_FLAGS +=
dts: generate multiple device tree blobs It is convenient to have all device trees on the same SoC compiled. It allows for later easy repackaging without the need to re-run the make file. - Build device trees with the same SoC under arch/$(ARCH)/dts - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or DEVICE_TREE=... to dts/dt.dtb Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-05 02:28:27 +00:00
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
clean-files := *.dtb
Reference in a new issue Copy permalink