Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-25 14:10:43 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/gwventana_gw5904_defconfig

164 lines
4.2 KiB
Text
Raw Normal View History

imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-03 17:10:38 +00:00
CONFIG_SYS_TEXT_BASE=0x17800000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_SYS_MALLOC_LEN=0xa00000
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:30 +00:00
CONFIG_SPL_GPIO=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xB1400
arm: mx6: Make all i.MX6 SoCs user-selectable We have a number of platforms that are a combination of a carrier board and System-on-Module (SoM) that in turn allows for the board to have different SoCs on it. In some cases, this is handled via board-specific Kconfig options. In other cases we make use of CONFIG_SYS_EXTRA_OPTIONS. This latter case however can lead to invalid configurations as we will not in turn get options that in Kconfig are selected by or depend on that setting. To resolve this, make the SoC option a choice in Kconfig and make boards depend on what they can support. This change opens us up for further clean-ups in the cases where a single CONFIG_TARGET_xxx can support different SoCs and today they do not, or do not cleanly do so. Reported-by: Matt Porter <mporter@konsulko.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Soeren Moch <smoch@web.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Heiko Schocher <hs@denx.de> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de> Cc: Ludwig Zenz <lzenz@dh-electronics.de> Cc: Lukasz Majewski <lukma@denx.de> Cc: Akshay Bhat <akshaybhat@timesys.com> Cc: Ken Lin <Ken.Lin@advantech.com.tw> Cc: Ian Ray <ian.ray@ge.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Cc: Simone CIANNI <simone.cianni@bticino.it> Cc: Adam Ford <aford173@gmail.com> Cc: Marcin Niestroj <m.niestroj@grinn-global.com> Cc: "Eric Bénard" <eric@eukrea.com> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Jason Liu <jason.hui.liu@nxp.com> Cc: Ye Li <ye.li@nxp.com> Cc: Eric Nelson <eric@nelint.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Parthiban Nallathambi <parthiban@linumiz.com> Cc: Marek Vasut <marex@denx.de> Cc: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Niel Fourie <lusus@denx.de> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Richard Hu <richard.hu@technexion.com> Cc: Stefan Roese <sr@denx.de> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Cc: Breno Lima <breno.lima@nxp.com> Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org> Cc: Silvio Fricke <open-source@softing.de> Tested-by: Matt Porter <mporter@konsulko.com> [colibri_imx6] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2020-08-18 11:43:50 +00:00
CONFIG_MX6QDL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 20:15:47 +00:00
CONFIG_TARGET_GW_VENTANA=y
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
Convert CONFIG_CMD_EECONFIG to Kconfig This converts the following to Kconfig: CONFIG_CMD_EECONFIG Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:09 +00:00
CONFIG_CMD_EECONFIG=y
Convert CONFIG_CMD_GSC to Kconfig This converts the following to Kconfig: CONFIG_CMD_GSC Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:24 +00:00
CONFIG_CMD_GSC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="imx6q-gw54xx"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06 17:54:25 +00:00
CONFIG_SPL_TEXT_BASE=0x00908000
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
CONFIG_SPL_MMC=y
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
CONFIG_SPL_SERIAL=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_SPL_STACK_R_ADDR=0x18000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_SPL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-28 18:28:38 +00:00
CONFIG_ENV_OFFSET_REDUND=0xD1400
Convert CONFIG_CMD_HDMIDETECT to Kconfig This converts the following to Kconfig: CONFIG_CMD_HDMIDETECT Note that we cannot do 'default y if VIDEO' because this option is only enabled for a small subset of mx6 boards. Also this command is is not a great implementation (it doesn't use driver model). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:28 +00:00
CONFIG_CMD_HDMIDETECT=y
imx: ventana: enable dm support for MMC and SATA Enable driver model support for MMC and SATA. Note that DM_MMC requires aliases for your mmc devices so they are added to the dts. Linux does not support enumerating mmc devices by alias so these are not present in the Linux dts. Note that we still need board_mmc_init() and board_mmc_getcd() for not DM SPL to support MMC. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:35 +00:00
CONFIG_AHCI=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
imx: ventana: convert U-Boot to OF_CONTROL using FIT image In preparation for dm conversion convert to OF_CONTROL by adding FIT image support and multi dtb. Add a board_fit_config_name_match to match the dtb based off of EEPROM model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:32 +00:00
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_SUPPORT_RAW_INITRD=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-10 14:11:40 +00:00
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="for btype in ${bootdevs}; do echo; echo Attempting ${btype} boot...; if run ${btype}_boot; then; fi; done"
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-21 02:51:14 +00:00
CONFIG_USE_PREBOOT=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
# CONFIG_DISPLAY_BOARDINFO is not set
treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 12:38:17 +00:00
CONFIG_DISPLAY_BOARDINFO_LATE=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_BOARD_EARLY_INIT_F=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_MISC_INIT_R=y
imx: ventana: enable dm support for PCI and FEC ethernet Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-03 18:21:27 +00:00
CONFIG_PCI_INIT_R=y
Convert CONFIG_SPL_BOARD_INIT to Kconfig This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-03 09:13:32 +00:00
CONFIG_SPL_BOARD_INIT=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_SPL_STACK_R=y
imx: ventana: convert U-Boot to OF_CONTROL using FIT image In preparation for dm conversion convert to OF_CONTROL by adding FIT image support and multi dtb. Add a board_fit_config_name_match to match the dtb based off of EEPROM model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:32 +00:00
CONFIG_SPL_FIT_IMAGE_TINY=y
Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-15 11:30:41 +00:00
CONFIG_SPL_DMA=y
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
CONFIG_SPL_I2C=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_SPL_OS_BOOT=y
spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-30 16:39:59 +00:00
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
Rename SPL_POWER_SUPPORT to SPL_POWER Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-11 03:14:24 +00:00
CONFIG_SPL_POWER=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Ventana > "
CONFIG_CMD_BOOTZ=y
Convert CONFIG_CMD_SPL_WRITE_SIZE to Kconfig This converts the following to Kconfig: CONFIG_CMD_SPL_WRITE_SIZE Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:50 +00:00
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
Convert CONFIG_CMD_ASKENV et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_ASKENV CONFIG_CMD_BMP CONFIG_CMD_BOOTD CONFIG_CMD_CACHE CONFIG_CMD_CRC32 CONFIG_CMD_DHCP CONFIG_CMD_ENV CONFIG_CMD_EXPORTENV CONFIG_CMD_EXT2 CONFIG_CMD_EXT4 CONFIG_CMD_FLASH CONFIG_CMD_FS_GENERIC CONFIG_CMD_FUSE CONFIG_CMD_GPIO CONFIG_CMD_GPT CONFIG_CMD_GREPENV CONFIG_CMD_I2C CONFIG_CMD_IMLS CONFIG_CMD_IMPORTENV CONFIG_CMD_LOADB CONFIG_CMD_LOADS CONFIG_CMD_MEMINFO CONFIG_CMD_MII CONFIG_CMD_MTDPARTS CONFIG_CMD_NAND CONFIG_CMD_NAND_TRIMFFS CONFIG_CMD_NFS CONFIG_CMD_PCA953X CONFIG_CMD_PCA953X_INFO CONFIG_CMD_PCI CONFIG_CMD_PING CONFIG_CMD_READ CONFIG_CMD_SF CONFIG_CMD_SPI CONFIG_CMD_SPL CONFIG_CMD_SPL_WRITE_SIZE CONFIG_CMD_TIME CONFIG_CMD_TRACE CONFIG_CMD_UBI CONFIG_CMD_UBIFS CONFIG_CMD_UNZIP CONFIG_FS_EXT4 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-26 19:06:18 +00:00
CONFIG_CMD_UNZIP=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
# CONFIG_CMD_FLASH is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_GPIO=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_CMD_I2C=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_MMC=y
imx: ventana: add part command Add part command for obtaining info about disk partitions. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-09-29 22:04:16 +00:00
CONFIG_CMD_PART=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_PCI=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
imx: ventana: add U-Boot watchdog support Add watchdog support for U-Boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-09-29 22:04:17 +00:00
CONFIG_CMD_WDT=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
imx: ventana: fix splash logo drawing After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this by adding new requirements: - splashimage env variable. - CONFIG_SPLASH_SCREEN - CONFIG_CMD_BMP Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-09-29 22:04:20 +00:00
CONFIG_CMD_BMP=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:54:45 +00:00
CONFIG_CMD_MTDPARTS=y
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-22 21:55:07 +00:00
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_CMD_UBI=y
imx: ventana: convert U-Boot to OF_CONTROL using FIT image In preparation for dm conversion convert to OF_CONTROL by adding FIT image support and multi dtb. Add a board_fit_config_name_match to match the dtb based off of EEPROM model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:32 +00:00
CONFIG_OF_CONTROL=y
CONFIG_OF_LIST="imx6q-gw51xx imx6dl-gw51xx imx6q-gw52xx imx6dl-gw52xx imx6q-gw53xx imx6dl-gw53xx imx6q-gw54xx imx6dl-gw54xx imx6q-gw551x imx6dl-gw551x imx6q-gw552x imx6dl-gw552x imx6q-gw553x imx6dl-gw553x imx6q-gw560x imx6dl-gw560x imx6q-gw5903 imx6dl-gw5903 imx6q-gw5904 imx6dl-gw5904 imx6q-gw5907 imx6dl-gw5907 imx6q-gw5910 imx6dl-gw5910 imx6q-gw5912 imx6dl-gw5912 imx6q-gw5913 imx6dl-gw5913"
CONFIG_MULTI_DTB_FIT=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 11:16:32 +00:00
CONFIG_ENV_IS_IN_MMC=y
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 21:14:47 +00:00
CONFIG_SYS_MMC_ENV_PART=1
imx: Convert SERIAL_TAG support to ENV_VARS_UBOOT_RUNTIME_CONFIG No iMX platforms have supported ATAG-based booting. They have however re-used the CONFIG_SERIAL_TAG option as a way to enable support of reading the OTP fuses and setting the serial# environment variable in some cases. Change the warp7 support to use this symbol, use this for updating the rest of the imx7 code, and update the imx8 conditionals. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 13:16:29 +00:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
Convert CONFIG_NETCONSOLE to Kconfig This converts the following to Kconfig: CONFIG_NETCONSOLE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-23 17:06:36 +00:00
CONFIG_NETCONSOLE=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_DM=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_BOUNCE_BUFFER=y
ata: Migrate CONFIG_DWC_AHSATA to Kconfig Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-08 13:36:18 +00:00
CONFIG_DWC_AHSATA=y
Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACY First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:24 +00:00
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
CONFIG_SYS_I2C_MXC=y
imx: ventana: replace hard-coded LED config with dt based config Use device-tree LED config instead of hard-coded board-specific config. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-24 17:40:34 +00:00
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling from the underlying support and expose this through CMD_MMC_RPMB. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-08 04:43:31 +00:00
CONFIG_SUPPORT_EMMC_RPMB=y
Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-01 07:58:27 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
Convert CONFIG_FSL_USDHC to Kconfig This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 12:23:43 +00:00
CONFIG_FSL_USDHC=y
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
CONFIG_MTD=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_PHYLIB=y
CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=5
CONFIG_MV88E61XX_PHY_PORTS=0xf
CONFIG_MV88E61XX_FIXED_PORTS=0x0
imx: ventana: enable dm support for PCI and FEC ethernet Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-03 18:21:27 +00:00
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_E1000=y
imx: ventana: enable dm support for PCI and FEC ethernet Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-03 18:21:27 +00:00
CONFIG_FEC_MXC=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_PCI=y
imx: ventana: add pinctrl and remove unneeded UART init and config Once the IMX6 pinctrl driver is added UART is fully using driver mode so we no longer need to config and initialize it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:33 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
i2c: Convert CONFIG_POWER_I2C et al to Kconfig This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: More SPL related cleanups, reword commit message] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:27 +00:00
CONFIG_POWER_LEGACY=y
imx: ventana: enable dm support for USB Enable dm support for USB (which also requires dm support for fixed regulators used for vbus enable) and remove usb iomux which is no longer needed. We can remove the handling of otgpwr_en gpio as this is defined in dt as usbotg vbus-supply but we need to keep the handling of USB_HUB_RST# for boards that have a USB HUB as that isn't defined in the dt's currently. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:34 +00:00
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
i2c: Convert CONFIG_POWER_I2C et al to Kconfig This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: More SPL related cleanups, reword commit message] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:27 +00:00
CONFIG_POWER_I2C=y
imx: ventana: convert U-Boot to OF_CONTROL using FIT image In preparation for dm conversion convert to OF_CONTROL by adding FIT image support and multi dtb. Add a board_fit_config_name_match to match the dtb based off of EEPROM model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:32 +00:00
CONFIG_CONS_INDEX=2
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_DM_SERIAL=y
Convert CONFIG_MXC_UART to Kconfig This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-09 14:46:46 +00:00
CONFIG_MXC_UART=y
imx: ventana: enable dm for SPI Enable driver model for SPI which allows us to remove the iomux and init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-01 22:33:37 +00:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
imx: ventana: add U-Boot watchdog support Add watchdog support for U-Boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-09-29 22:04:17 +00:00
CONFIG_SYSRESET=y
CONFIG_SYSRESET_WATCHDOG=y
configs: migrate CONFIG_IMX_THERMAL to defconfigs Done via moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-30 01:22:03 +00:00
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_USB=y
CONFIG_USB_STORAGE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-27 01:10:37 +00:00
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
imx: ventana: enable additional USB ether devices Enable additional USB ethernet devices. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-09-29 22:04:19 +00:00
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_USB_ETHER_LAN75XX=y
CONFIG_USB_ETHER_LAN78XX=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-27 01:10:37 +00:00
CONFIG_USB_ETHER_SMSC95XX=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_USB_GADGET=y
usb: gadget: Make g_dnl USB settings common The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 06:58:08 +00:00
CONFIG_USB_GADGET_MANUFACTURER="Gateworks"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
usb: gadget: Convert USB_ETHER to Kconfig The USB Ethernet gadget option has not yet been moved to Kconfig, let's deal with that. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-06 21:23:21 +00:00
CONFIG_USB_ETHER=y
usb: gadget: usb_ether: Move the interfaces to Kconfig We need to select an interface for the usb_ether gadget, and they haven't been converted to Kconfig yet. Add a choice to make sure we have an option selected, and convert all the users. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 06:46:14 +00:00
CONFIG_USB_ETH_CDC=y
imx: convert gwventana board to DM_VIDEO Migration to DM_VIDEO driver is long overdue. Update defconfigs to enable usage of converted ipuv3 driver DM configuration. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
2020-05-25 22:58:17 +00:00
CONFIG_DM_VIDEO=y
video: Convert CONFIG_VIDEO_LOGO to Kconfig This converts the following to Kconfig: CONFIG_VIDEO_LOGO Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is deprecated. The only relevant code is now in splash.c Drop the check for DM_VIDEO in that file. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-19 20:24:01 +00:00
CONFIG_VIDEO_LOGO=y
imx: convert gwventana board to DM_VIDEO Migration to DM_VIDEO driver is long overdue. Update defconfigs to enable usage of converted ipuv3 driver DM configuration. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Tim Harvey <tharvey@gateworks.com>
2020-05-25 22:58:17 +00:00
# CONFIG_BACKLIGHT is not set
# CONFIG_CMD_VIDCONSOLE is not set
# CONFIG_VIDEO_BPP8 is not set
# CONFIG_VIDEO_BPP32 is not set
# CONFIG_VIDEO_ANSI is not set
CONFIG_SYS_WHITE_ON_BLACK=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
# CONFIG_PANEL is not set
Convert CONFIG_I2C_EDID et al to Kconfig This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-08 03:59:43 +00:00
CONFIG_I2C_EDID=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
CONFIG_VIDEO_IPUV3=y
imx: ventana: fix splash logo drawing After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this by adding new requirements: - splashimage env variable. - CONFIG_SPLASH_SCREEN - CONFIG_CMD_BMP Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-09-29 22:04:20 +00:00
CONFIG_SPLASH_SCREEN=y
CONFIG_SPLASH_SCREEN_ALIGN=y
imx: ventana: add U-Boot watchdog support Add watchdog support for U-Boot Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-09-29 22:04:17 +00:00
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
CONFIG_IMX_WATCHDOG=y
imx: ventana: add GW5904 support Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-17 14:30:38 +00:00
CONFIG_FDT_FIXUP_PARTITIONS=y
Reference in a new issue Copy permalink